Simulation of Circular Tubes Fitted with V Cut and Square Cut Rotors

2013 ◽  
Vol 561 ◽  
pp. 547-552
Author(s):  
Peng Jiang ◽  
Hua Yan ◽  
Zhen Zhang ◽  
Yu Mei Ding ◽  
Wei Min Yang
Keyword(s):  
Heat Transfer ◽  
Thermal Performance ◽  
Turbulent Heat Transfer ◽  
Cfd Modeling ◽  
Turbulent Heat ◽  
Circular Tubes ◽  
Performance Factor ◽  
Thermal Performance Factor ◽  
Computational Fluid Dynamics Cfd ◽  
Good Agreement

This work presents the effect of V cut and square cut rotors in circular tubes for turbulent heat transfer using computational fluid dynamics (CFD) modeling. The computational results are in good agreement with experimental data. The obtained results reveal that the use of square cut rotors leads to higher Nusselt number than use of V cut rotors. The results also show that the heat transfer rate, friction factor and thermal performance factor of rotors with square cut increase with the increase of width (a) and depth (b) of rotors’ cut. Square cut rotors with a=b=3 yields higher mean thermal performance factor than those with other width and depth, a=b=1, 2 and the highest thermal performance factor of square cut rotors at a=b=1, 2, 3 are found to be 2.08, 2.11 and 2.13.

scholarly journals Modeling and Simulations of Deteriorated Turbulent Heat Transfer in Wall Heated Cylindrical Tube

2019 ◽  
Author(s):  
Prasad Vegendla ◽  
Rui Hu
Keyword(s):  
Heat Transfer ◽  
Nuclear Power ◽  
Cylindrical Tube ◽  
Fluid Flows ◽  
Turbulent Heat Transfer ◽  
Wall Region ◽  
Turbulent Heat ◽  
Modeling And Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Good Agreement

Abstract The paper discusses the modeling and simulations of Deteriorated Turbulent Heat Transfer (DTHT) for a wall-heated fluid flows, which can be observed in gas-cooled nuclear power reactors during Pressurized Conduction Cooldown (PCC) event due to loss of force circulation flow. The DTHT regime is defined as the deterioration of normal turbulent heat transport due to increase of acceleration and buoyancy forces. The Computational Fluid Dynamics (CFD) tools such as Nek5000 and STAR-CCM+ can help to analyze the DTHT phenomena in reactors for efficient thermal-fluid designs. 3D CFD non-isothermal modeling and simulations were performed in a wall-heated circular tube. The simulation results were verified with two different CFD tools, Nek5000 and STAR-CCM+, and validated with an experimental data. The predicted bulk temperatures were identical in both CFD tools, as expected. Good agreement between simulated results and measured data were obtained for wall temperatures along the tube axis using Nek5000. In STAR-CCM+, the under-predicted wall temperatures were mainly due to higher turbulence in the wall region. In STAR-CCM+, the predicted DTHT was over 48% at outlet when compared to inlet heat transfer values.

scholarly journals Simulation approach on turbulent thermal performance factor of Al2O3-Cu/water hybrid nanofluid in circular and non-circular ducts

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Ing Jiat Kendrick Wong ◽  
Ngieng Tze Angnes Tiong
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Pressure Drop ◽  
Thermal Performance ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
Hybrid Nanofluid ◽  
Performance Factor ◽  
Thermal Performance Factor ◽  
The Heat Transfer Coefficient

AbstractThis paper presents the numerical study of thermal performance factor of Al2O3-Cu/water hybrid nanofluid in circular and non-circular ducts (square and rectangular). Turbulent regime is studied with the Reynolds number ranges from 10000 to 100000. The heat transfer performance and flow behaviour of hybrid nanofluid are investigated, considering the nanofluid volume concentration between 0.1 and 2%. The thermal performance factor of hybrid nanofluid is evaluated in terms of performance evaluation criteria (PEC). This present numerical results are successfully validated with the data from the literature. The results indicate that the heat transfer coefficient and Nusselt number of Al2O3-Cu/water hybrid nanofluid are higher than those of Al2O3/water nanofluid and pure water. However, this heat transfer enhancement is achieved at the expense of an increased pressure drop. The heat transfer coefficient of 2% hybrid nanofluid is approximately 58.6% larger than the value of pure water at the Reynolds number of 10000. For the same concentration and Reynolds number, the pressure drop of hybrid nanofluid is 4.79 times higher than the pressure drop of water. The heat transfer performance is the best in the circular pipe compared to the non-circular ducts, but its pressure drop increment is also the largest. The hybrid nanofluid helps to improve the problem of low heat transfer characteristic in the non-circular ducts. In overall, the hybrid nanofluid flow in circular and non-circular ducts are reported to possess better thermal performance factor than that of water. The maximum attainable PEC is obtained by 2% hybrid nanofluid in the square duct at the Reynolds Number of 60000. This study can help to determine which geometry is efficient for the heat transfer application of hybrid nanofluid.

scholarly journals Augmentation of Heat Transfer in a Circular Channel with Inline and Staggered Baffles

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8593
Author(s):  
Muneerah Al Nuwairan ◽  
Basma Souayeh
Keyword(s):  
Heat Transfer ◽  
Thermal Performance ◽  
Working Fluid ◽  
Solar Air Heater ◽  
Circular Channel ◽  
Maximum Enhancement ◽  
Performance Factor ◽  
Thermal Performance Factor ◽  
Sst Model ◽  
Inlet Length

This numerical investigation presents the effects of the position of baffles in the shape of a circle’s segment placed inside a circular channel to improve the thermal and flow performance of a solar air heater. Three different baffles’ positions with Reynolds number varying between 10,000 to 50,000 were investigated computationally. The k-omega SST model was used for solving the governing equations. Air was taken as the working fluid. Three pitch ratios (Y = 3, 4, and 5) were considered, while the height of the baffles remained fixed. The result showed an enhancement in Nusselt number, friction factor, j-factor, and thermal performance factor. Staggered exit-length baffles showed maximum enhancement in heat transfer and pressure drop, while inline inlet-length baffles showed the least enhancement. For a pitch ratio of Y = 3.0, the enhancement in all parameters was the highest, while for Y = 5.0, the enhancement in all parameters was the least. The highest thermal performance factor of 1.6 was found for SEL at Y = 3.0.

Modeling and Simulations of Deteriorated Turbulent Heat Transfer in Wall-Heated Cylindrical Tube

2019 ◽  
Vol 4 (3) ◽  
Author(s):  
Prasad Vegendla ◽  
Rui Hu
Keyword(s):  
Heat Transfer ◽  
Nuclear Power ◽  
Three Dimensional ◽  
Cylindrical Tube ◽  
Fluid Flows ◽  
Turbulent Heat Transfer ◽  
Wall Region ◽  
Turbulent Heat ◽  
Modeling And Simulations ◽  
Computational Fluid Dynamics Cfd

Abstract This paper discusses the modeling and simulations of deteriorated turbulent heat transfer (DTHT) for a wall-heated fluid flows, which can be observed in gas-cooled nuclear power reactors during pressurized conduction cooldown (PCC) event due to loss of force circulation flow. The DTHT regime is defined as the deterioration of normal turbulent heat transport due to increase of acceleration and buoyancy forces. The computational fluid dynamics (CFD) tools such as Nek5000 and STAR-CCM+ can help to analyze the DTHT phenomena in reactors for efficient thermal-fluid designs. Three-dimensional (3D) CFD nonisothermal modeling and simulations were performed in a wall-heated circular tube. The simulation results were validated with two different CFD tools, Nek5000 and STAR-CCM+, and validated with an experimental data. The predicted bulk temperatures were identical in both CFD tools, as expected. Good agreement between simulated results and measured data were obtained for wall temperatures along the tube axis using Nek5000. In STAR-CCM+, the under-predicted wall temperatures were mainly due to higher turbulence in the wall region. In STAR-CCM+, the predicted DTHT was over 48% at outlet when compared to inlet heat transfer values.

Augmented Heat Transfer in a Rectangular Channel With Permeable Ribs Mounted on the Wall

1994 ◽  
Vol 116 (4) ◽  
pp. 912-920 ◽  
Author(s):  
Jenn-Jiang Hwang ◽  
Tong-Miin Liou
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Thermal Performance ◽  
Rectangular Channel ◽  
Area Ratio ◽  
Turbulent Heat Transfer ◽  
Turbulent Heat ◽  
Open Area ◽  
Number Range ◽  
Solid Type

Turbulent heat transfer and friction in a rectangular channel with perforated ribs arranged on one of the principal walls are investigated experimentally. The effects of rib open-area ratio, rib pitch-to-height ratio, rib height-to-channel hydraulic diameter ratio, and flow Reynolds number are examined. To facilitate comparison, measurements for conventional solid-type ribs are also conducted. Laser holographic interferometry is employed to determine the rib permeability and measure the heat transfer coefficients of the ribbed wall. Results show that ribs with appropriately high open-area ratio at high Reynolds number range are permeable, and the critical Reynolds number of initiation of flow permeability decreases with increasing rib open-area ratio. By examining the local heat transfer coefficient distributions, it is found that permeable ribbed geometry has an advantage of obviating the possibility of hot spots. In addition, the permeable ribbed geometry provides a higher thermal performance than the solid-type ribbed one, and the best thermal performance occurs when the rib open-area ratio is 0.44. Compact heat transfer and friction correlations are also developed for channels with permeable ribs.

scholarly journals Radiation Effects on Turbulent Heat Transfer Characteristics in Vertical Channel

2020 ◽  
Vol 9 (1) ◽  
pp. 2783-2787
Keyword(s):  
Heat Transfer ◽  
Radiation Effects ◽  
Vertical Channel ◽  
Turbulent Heat Transfer ◽  
Discrete Ordinates ◽  
Turbulent Heat ◽  
Governing Equations ◽  
Heat Transfer Characteristics ◽  
Discrete Ordinates Method ◽  
Computational Fluid Dynamics Cfd

In this study we concentrated on the radiative turbulent air to enter into the convective vertical channel. The vertical channel is having two openings at top and the bottom. The radiation is modelled with discrete ordinates method and turbulence is modelled with computational fluid dynamics (CFD) approach using Lambremhorst turbulence model. The governing equations are solved and discretized by using Finite Difference Method (FDM). The parametric study is performed on Assisting and opposing cases by comparing both the cases with the radiation and without radiation in the channel and found that temperature and velocity characteristics have much impact when the channel is involved with radiation

Experimental and Numerical Investigation of Flow and Heat Transfer in Stationary Two-Pass Rectangular Duct (AR = 1:2) with Continuous and Broken V- shaped ribs

2021 ◽  
pp. 1-37
Author(s):  
Ramesh Erelli ◽  
Arun Saha
Keyword(s):  
Heat Transfer ◽  
Thermal Performance ◽  
Heated Surface ◽  
Reynolds Analogy ◽  
Nusselt Numbers ◽  
Flow And Heat Transfer ◽  
Performance Factor ◽  
Thermal Performance Factor ◽  
Friction Factors ◽  
Local Temperature Distribution

Abstract The combined experimental and Large Eddy Simulations (LES) were performed in the stationary two-pass duct of aspect ratio (AR) 1:2. The experiments were conducted with three different rib arrangements, namely 60° V, 60° V-IV, and broken 60° V-IV ribs, and analysis was carried out with Reynolds numbers of 45,000, 60,000, and 75,000. The infrared thermography (IRT) technique is employed to obtain the local temperature distribution on heated smooth and ribbed surfaces. In all ribbed cases, the copper ribs are glued to the heated surface with a fixed rib height-to-hydraulic diameter (e / Dh) ratio is 0.125 and the rib pitch-to-height ratio (P / e) is 10 and 5 for continuous and broken ribs, respectively. In addition, LES turbulence model was adopted for carrying out simulation to understand the flow and heat transfer behavior in ducts populated with all three V-shaped ribs. The comparison of the time-averaged thermal fields generated using computations has been made with experimentally measured Nusselt numbers, friction factors, thermal performance factor (TPF), and Reynolds analogy performance parameter (RAPP) for all cases. The overall thermal performance factor was found to be quantitatively within 8.0 - 10.66% between experimental and numerical results. Among all the cases, the 60° V-IV ribbed duct provides the best TPF and RAPP than the other two ribbed ducts, whereas the smooth duct shows poor TPF.

Sign in / Sign up

Export Citation Format

Share Document