Design and Analysis of the End-Effector of the Flexible Polishing Robot

2016 ◽  
Vol 693 ◽  
pp. 58-63
Author(s):  
Jie Tang ◽  
Tao Wang ◽  
Zhi Qi Yan ◽  
Li Wen Wang
Keyword(s):  
Dynamic Model ◽  
Theoretical Basis ◽  
Equations Of Motion ◽  
Labor Cost ◽  
Technical Support ◽  
Cost Study ◽  
Continuous Growth ◽  
End Effector ◽  
Polishing Tool ◽  
Further Development

The continuous growth of labor Cost, Study on the flexible robotic polishing systems has important realistic meanings. In this paper, After fully understanding the requirements of designing polishing tool based on polishing technology, a robot end-effector polishing tool held by the arm of robot is designed, and the establishment of a dynamic model and the equations of motion dynamics, which to provide technical support and theoretical basis for further development and optimization of flexible robotic polishing systems.

Dynamic Modeling of an Innovative Piezoelectric Actuator for Minimally Invasive Surgery

1999 ◽  
Author(s):  
Benjamin Edinger ◽  
Mary Frecker ◽  
John Gardner
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Dynamic Model ◽  
Invasive Surgery ◽  
Force Measurement ◽  
Equations Of Motion ◽  
Measurement Model ◽  
End Effector ◽  
Simulation Results ◽  
Optimal Driving

Abstract A small piezoelectric inchworm actuator has been designed for use with a monolithic compliant end-effector in minimally invasive surgery procedures. A dynamic model of the inchworm actuator has been developed using SIMULINK. Utilizing the equations of motion for the inchworm actuator, the dynamic characteristics of the piezoelectric stack material, and the known compliance of the gripper, a force measurement model has been developed which extracts resisting force information from the piezoelectric signal. The focus of this paper is on the development of the dynamic model and the results of a simulation study that will be used to develop optimal driving signals for the inchworm actuator. Simulation results include the predicted displacement capabilities and settling time of the inchworm actuator over a range of driving frequencies.

On the Properties of a Dynamic Model of Flexible Robot Manipulators

1998 ◽  
Vol 120 (1) ◽  
pp. 8-14 ◽  
Author(s):  
Marco A. Arteaga
Keyword(s):  
Dynamic Model ◽  
Structural Properties ◽  
Robot Manipulators ◽  
Equations Of Motion ◽  
Mechanical Systems ◽  
Control Design ◽  
Flexible Manipulator ◽  
Robot Dynamics ◽  
Flexible Link ◽  
Flexible Robot

Control design of flexible robot manipulators can take advantage of the structural properties of the model used to describe the robot dynamics. Many of these properties are physical characteristics of mechanical systems whereas others arise from the method employed to model the flexible manipulator. In this paper, the modeling of flexible-link robot manipulators on the basis of the Lagrange’s equations of motion combined with the assumed modes method is briefly discussed. Several notable properties of the dynamic model are presented and their impact on control design is underlined.

Adding flexibility to the links of a rigid-link dynamic model of an articulated robot

Robotica ◽  
1989 ◽  
Vol 7 (2) ◽  
pp. 165-168 ◽  
Author(s):  
A. Bodner
Keyword(s):  
Computational Complexity ◽  
Dynamic Model ◽  
Euler Equations ◽  
Inverse Dynamics ◽  
Small Degree ◽  
End Effector ◽  
Rigid Link ◽  
Link Model ◽  
Articulated Robot ◽  
Special Case

SUMMARYA method was developed that takes into account flexibility of robot links in the inverse dynamics calculations. This method uses the Newton-Euler equations and is applicable for special case systems that allow for only a small degree of flexibility. Application of the method should improve the accuracy of the position of the end effector during motion of the robot.The results of this study show that the method can be based entirely on an existing rigid-link model with only minimal changes required as additions. The computational complexity of the method is discussed briefly as well and indicates an increase of computations of slightly more than a factor of two as compared to a rigid-link model for the same robot geometry.

Toward a Minimal Dynamic Model of a 6-DOF Parallel Robot

1997 ◽  
Author(s):  
L. Beji ◽  
M. Pascal ◽  
P. Joli
Keyword(s):  
Dynamic Model ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Computational Cost ◽  
Closed Form Solution ◽  
Parallel Robot ◽  
Form Solution ◽  
Lagrangian Formalism ◽  
Inverse Kinematic Problem ◽  
Geometrical Properties

Abstract In this paper, an architecture of a six degrees of freedom (dof) parallel robot and three limbs is described. The robot is called Space Manipulator (SM). In a first step, the inverse kinematic problem for the robot is solved in closed form solution. Further, we need to inverse only a 3 × 3 passive jacobian matrix to solve the direct kinematic problem. In a second step, the dynamic equations are derived by using the Lagrangian formalism where the coordinates are the passive and active joint coordinates. Based on geometrical properties of the robot, the equations of motion are derived in terms of only 9 coordinates related by 3 kinematic constraints. The computational cost of the obtained dynamic model is reduced by using a minimum set of base inertial parameters.

Dynamic Analysis of Mechanical Systems With Time-Varying Topologies: Part 1 — Dynamic Model and Stability Analysis

1990 ◽  
Author(s):  
Yu Wang
Keyword(s):  
Stability Analysis ◽  
Dynamic Model ◽  
Local Stability ◽  
Global Analysis ◽  
Equations Of Motion ◽  
Mechanical Systems ◽  
Time Varying ◽  
Discrete Equations ◽  
Local Stability Analysis ◽  
Multiple Collisions

Abstract A model is developed for analyzing mechanical systems with a pair of bodies with topological changes in their kinematic constraints. It is built upon the concept of Poincaré map rather than following the traditional methods of differential equations. The model provides a set of well-defined and naturally-discrete equations of motion and is capable of giving physical insights of dynamic characteristics of deadbeat convergence of multiple collisions and periodic or chaotic responses. The development of dynamic model and a local stability analysis are presented in Part 1, and the global analysis and numerical simulation are discussed in Part 2.

A Study on Sensitivity of Maneuverability Performance on the Hydrodynamic Coefficients for Submerged Bodies

2000 ◽  
Vol 44 (03) ◽  
pp. 186-196
Author(s):  
Debabrata Sen
Keyword(s):  
Dynamic Model ◽  
Dynamic Models ◽  
Equations Of Motion ◽  
Inertial Force ◽  
Axisymmetric Body ◽  
Hydrodynamic Coefficients ◽  
Damping Coefficients ◽  
Simulated Trajectory ◽  
Linear Damping

Based on a constant-coefficient dynamic model, a study was made to determine the influence of various hydrodynamic coefficients on the predicted maneuverability quality of submerged bodies. Two types of geometries were considered, a submarine and an axisymmetric slender geometry. For the submarine, the equations of motion used were the revised standard submarine equations (Feldman 1979) while for the latter geometry a dynamic model was developed. From computer simulation of a few selected definitive maneuvers based on these two different dynamic models for the two geometries, the sensitivity of the simulated trajectory on changes in different coefficients was found. The results quantified in form of sensitivity values are presented. It is found that the typical measures from the maneuvers do not depend significantly on most of the nonlinear coefficients. The coefficients having significant effects on the trajectories are found to be the linear damping coefficients for the submarine and the linear inertial force coefficients for the axisymmetric body.

scholarly journals Dynamic model of end-effector actuator used for mobile robotic weeder

2020 ◽  
Vol 747 ◽  
pp. 012084
Author(s):  
A G Ivanov ◽  
V V Zhoga ◽  
V.E Pavlovsky ◽  
N S Vorob’yeva
Keyword(s):  
Dynamic Model ◽  
End Effector

Design and Thermodynamic Analysis on One-Step Amination of Benzene to Aniline Systems

2012 ◽  
Vol 550-553 ◽  
pp. 2607-2611
Author(s):  
Chun Hua Yang ◽  
Gang Chen ◽  
Long Zhang
Keyword(s):  
Hydrogen Peroxide ◽  
Free Energy ◽  
Equilibrium Constant ◽  
Gibbs Free Energy ◽  
Driving Force ◽  
Theoretical Basis ◽  
Free Energies ◽  
One Step ◽  
The One ◽  
Further Development

Seven systems of one-step synthesis of aniline were designed, and it was determined which one could occur spontaneously through the calculation of Gibbs free energy of it. Among the seven systems, the Gibbs free energy of the one with ammonia as the aminating agent and hydrogen peroxide as the oxidant was the lowest, thus its process driving force was the largest, that is, .For this system just mentioned above, the standard Gibbs free energies, the equilibrium constant and the equilibrium conversions of benzene under different conditions were discussed ,which was expected to provide a theoretical basis for further development and application of the system.

Modeling and Parameter Identification of an In-Tank Swimming Robot Performing Floor Inspection

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Imen Hbiri ◽  
Houssem Karkri ◽  
Fathi H. Ghorbel ◽  
Slim Choura
Keyword(s):  
Dynamic Model ◽  
Drag Force ◽  
Equations Of Motion ◽  
Experimental Tests ◽  
Force Model ◽  
Friction Drag ◽  
Control Laws ◽  
Low Speed ◽  
Advanced Control ◽  
Computational Fluid Dynamics Cfd

In this paper, we develop the equations of motion at low-speed of a swimming robot for tank floor inspection. The proposed dynamic model incorporates a new friction drag force model for low-speed streamlined swimming robots. Based on a boundary layer theory analysis, we prove that for low-speed maneuvering case (Re from 103 to 105), the friction drag force component is nonlinear and is not insignificant, as previously considered. The proposed drag viscous model is derived based on hydrodynamic laws, validated via computational fluid dynamics (CFD) simulations, and then experimental tests. The model hydrodynamic coefficients are estimated through CFD tools. The robot wheels friction LuGre model is experimentally identified. Extensive experimental tests were conducted on the swimming robot in a circular water pool to validate the complete dynamic model. The dynamic model developed in this paper may be useful to design model-based advanced control laws required for accurate maneuverability of floor inspection swimming robots.

Sign in / Sign up

Export Citation Format

Share Document