The Comparison of Properties of Fine Recycled Aggregate Concrete from Different Sources of Recycled Aggregate

2018 ◽  
Vol 760 ◽  
pp. 176-183 ◽  
Author(s):  
Tereza Pavlů
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Concrete Properties ◽  
Different Sources

The main aim of this contribution is comparison the properties of fine aggregate concrete with partial replacement of sand by fine recycled aggregate. The fine recycled aggregate originated from two different sources. The main topic of this article is the study of influence of the origin of FRA to fine aggregate concrete properties. The compressive strength, flexural strength and freeze-thaw resistance were tested. The mechanical properties and weight were examined after 28 and 60 days and after 25, 50, 75 and 100 cycles of freeze-thaw. Partial replacement of sand was 25 and 50 % for all these tests. The properties were investigated by using prismatic specimens.

The Properties of Fine Recycled Aggregate Concrete Containing Recycled Bricks from Construction and Demolition Waste

2018 ◽  
Vol 760 ◽  
pp. 193-198 ◽  
Author(s):  
Kristina Fořtová ◽  
Tereza Pavlů
Keyword(s):  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Natural Sand ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Recycled Fine Aggregate

This paper presents research results of recycled fine aggregate concrete testing. The main aim of this contribution is verification of properties of fine aggregate concrete with partial replacement of fine natural aggregate by recycled masonry aggregate originated from construction and demolition waste. The influence of partial replacement of natural sand to mechanical properties and freeze-thaw resistance is described. The compressive strength and flexural strength were tested at the age of 28 and 60 days and after 25, 50, 75 and 100 freeze-thaw cycles. Partial replacement of natural sand was 0, 25 and 50 % for all these tests. Prismatic specimens were examined.

scholarly journals Compressive Strength Study on the Freeze-thaw Resistance of Recycled Aggregate Concrete Members

2017 ◽  
Vol 11 (1) ◽  
pp. 270-280 ◽  
Author(s):  
Haicheng Niu ◽  
Yonggui Wang ◽  
Xianggang Zhang ◽  
Xiaojing Yin
Keyword(s):  
Compressive Strength ◽  
Mass Loss ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Replacement Rate ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Surface Scaling

Introduction: Freeze-thaw resistance of recycled aggregate concrete with partial or total replacement of recycled aggregate compared with that of natural aggregate concrete was investigated in this paper. Method: Ninety specimens were fabricated to study the influence of different recycled aggregate replacement ratios on the surface scaling, mass loss, and residual compressive strength after 100 freeze-thaw cycles. Results: The experiment results indicate that the type of recycled aggregate and its replacement ratio have significant effects on the freeze-thaw performance. The cubic compressive strength of recycled aggregate concrete is overall slightly lower than that of normal concrete. After 100 freeze-thaw cycles, the compressive strength decreases and the reduction extent increases with increasing replacement rate of recycled aggregate. The surface scaling of reinforced recycled concrete prisms tends to be more severe with the increase of freeze-thaw cycles. Conclusion: Furthermore, a notable rise in mass loss and the bearing capacity loss is also found as the substitution ratio increases. Under the same replacement rate, recycled fine aggregate causes more negative effects on the freeze-thaw resistance than recycled coarse aggregate.

Relationship between Microstructure and Mechanical Properties for Recycled Aggregate Concrete

2013 ◽  
Vol 811 ◽  
pp. 213-217
Author(s):  
Wei Li ◽  
Wen Sheng Ding ◽  
Hai Ying Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Average Pore ◽  
Aggregate Concrete ◽  
Active Particles ◽  
Lower Porosity ◽  
Porous Microstructure ◽  
Mixing Method

Microstructure is an important factor that influences the mechanical properties of recycled aggregate concrete (RAC). This paper was devoted to an investigation of the relationship between mechanical properties and porosity, hydrate, microstructure of interfacial transition zone (ITZ) in RAC. The result showed that mechanical properties of RAC can be further enhanced with lower porosity, and there was a good linear relation, whereas it did not exist between compressive strength of RAC and average pore diameter. Fine active particles and the hydrate were formed into the cracked and loose layer of ITZ in RAC by A tripe mixing method (TM). Through SEM observation, it is expected that the compressive strength of the RAC can be improved by modifying the porous microstructure and hydrate in ITZ.

scholarly journals Basic Mechanical Properties of Basalt Fiber Reinforced Recycled Aggregate Concrete

2017 ◽  
Vol 11 (1) ◽  
pp. 43-53 ◽  
Author(s):  
Huaxin Liu ◽  
Jianwei Yang ◽  
Xiangqing Kong ◽  
Xuxu Xue
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Basalt Fiber ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Mixing Ratio ◽  
Fiber Reinforced ◽  
Aggregate Concrete ◽  
Chopped Basalt Fiber

In order to study the basic mechanical properties of basalt fiber reinforced recycled aggregate concrete, the concrete mix ratio, the length and the volume mixing ratio of chopped basalt fiber yarn are designed for changing factors. A total of 324 specimens have been completed for this investigation. The compressive strength, splitting tensile strength, elastic modulus and axial compressive strength of basalt fiber recycled concrete have carried on the experimental study and theoretical analysis as 81 specimens, respectively. In all specimens, coarse aggregate were replaced by recycled aggregate with a replacement rate of 100%. Experimental results show that the failure process and failure pattern of basalt fiber recycled concrete and ordinary concrete are similar; With the improvement of concrete strength grade; When the volume mixing ratio of chopped basalt fiber yarn is 0.2%, the mechanic performance can effectively improve, and the length of chopped basalt fiber has less effect on the mechanical indexes; The conversion relation between common concrete mechanics index is no longer suitable for basalt fiber recycled concrete, new conversion formulas for basalt fiber recycled concrete between the mechanics index were presented through fitting experimental data.

EFFECT OF DIFFERENT TYPES OF FIBER UTILIZATION ON MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE CONTAINING SILICA FUME

2020 ◽  
Vol 15 (1) ◽  
pp. 119-136 ◽  
Author(s):  
Muhammet Gökhan Altun ◽  
Meral Oltulu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hybrid Fibers ◽  
Normal Concrete ◽  
Aggregate Concrete ◽  
Volume Fractions ◽  
Coarse Aggregates

ABSTRACT The use of recycled aggregate (RA) instead of natural aggregate (NA) in concrete is necessary for environmental protection and the effective utilization of resources. The addition of recycled aggregates in concrete increases shrinkage, porosity and decreases the mechanical properties compared to that of normal concrete. This study was aimed at investigating how the addition of various proportions of polypropylene and steel fiber affect the mechanical properties of recycled aggregate concrete (RAC). The natural coarse aggregates (NCAs) used in the production of normal concrete (NC) were replaced in 30% and 50% proportions by recycled coarse aggregates (RCAs) obtained from the demolished buildings. In this case, a polypropylene fiber (PF) content of 0.1% and steel fiber (SF) 1% and 2% volume fractions were used, along with hybrid fibers-a combination of the two. While the material performance of RAC compared to NC is analyzed by reviewing existing published literature, it is not evident what the use of RCAs and hybrid fibers have on the mechanical properties of concrete. The results showed that the compressive strength, flexural strength and impcat resistance of RAC were reduced as the percentage of RCAs increased. It was observed that the compressive strength was increased with the addition of 1% steel fiber in the RAC. The flexural and impact performance of steel fiber-reinforced concrete (Specimens NC and RAC) was increased as the volume fractions of steel fiber increased. The hybrid fiber reinforced concretes showed the best results in their mechanical performance of all the concrete groups.

scholarly journals EFFECT OF HYBRID FIBER ON THE MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE

2018 ◽  
Vol 80 (5) ◽  
Author(s):  
Sallehan Ismail ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Mechanical Strength ◽  
Impact Load ◽  
Load Resistance ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Normal Concrete ◽  
Aggregate Concrete

This study investigates the effect of inclusion of polyolefin and polypropylene fibers at various volume fractions in single and hybrid forms on the mechanical properties of recycled aggregate concrete (RAC) mix that consists of treated coarse recycled concrete aggregate (RCA). Testing parameters, such as compressive strength, flexural strength, static modulus of elasticity, and impact load resistance, are utilized to evaluate the mechanical strength of specimens. The various properties of the modified RAC are also analyzed and compared with those of normal concrete and unmodified RAC specimens. Findings indicate that the mechanical strength properties of RAC mixture using treated RCA were significantly enhanced by adding fibers. The overall optimized mechanical strength results could be obtained in RAC mixtures with fiber in hybrid form, where their compressive strength at long-term curing age, can be significantly improved by 7% upto 11% higher than normal concrete. In addition, RAC mix with hybrid fibers produced the highest flexural strength and impact load resistance by an increase of 5% and 175%, respectively as compared with the control concrete.  

scholarly journals Mechanical Properties of Recycled Aggregate Concrete at Low and High Water/Binder Ratios

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Gai-Fei Peng ◽  
Yan-Zhu Huang ◽  
Hai-Sheng Wang ◽  
Jiu-Feng Zhang ◽  
Qi-Bing Liu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fracture Energy ◽  
Main Type ◽  
High Water ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Heating Process ◽  
Aggregate Concrete

This paper presents an experimental research on mechanical properties of recycled aggregate concrete (RAC) at low and high water/binder (W/B) ratios. Concrete at two W/B ratios (0.255 and 0.586) was broken into recycled concrete aggregates (RCA). A type of thermal treatment was employed to remove mortar attached to RCA. The RAC at a certain (low or high) W/B ratio was prepared with RCA made from demolished concrete of the same W/B ratio. Tests were conducted on aggregate to measure water absorption and crushing values and on both RAC and natural aggregate concrete (NAC) to measure compressive strength, tensile splitting strength, and fracture energy. The mechanical properties of RAC were lower than those of NAC at an identical mix proportion. Moreover, the heating process caused a decrease in compressive strength and fracture energy in the case of low W/B ratio but caused an increase in those properties in the case of high W/B ratio. The main type of flaw in RCA from concrete at a low W/B ratio should be microcracks in gravel, and the main type of flaw in RCA from concrete at a high W/B ratio should be attached mortar.

scholarly journals Factorial Design for Studying the Properties of Recycled Aggregate Concrete Exposed to Aggressive Media

2021 ◽  
Vol 9 (ICRIE) ◽  
Author(s):  
Ammar Ali Abed ◽  
◽  
Ibtisam Mustafa Kamal ◽  
Keyword(s):  
Weight Loss ◽  
Compressive Strength ◽  
Standard Procedure ◽  
Operating Parameter ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Immersion Period ◽  
The Impact

Recycled Aggregate Concrete (RAC) mixes (1.15: 2.3: 4.6) cement: fine aggregate (sand): coarse aggregate (demolition concrete waste), water / cement (0.5), and 50 % demolition aggregates were prepared according to standard procedure. The resistance of the recycled aggregate concretes towards chemicals was investigated throughout the attack of (Acid: acetic Acid HAC, and salt: Sodium Chloride NaCl) solutions. The test was carried out based on adopted experiments designed using Response Surface Methodology (RSM). A 2-operating parameter central composite design was adopted to study the impact of concentration of the HAC and NaCl solutions (0.1-0.45) Molar, and immersion period (0.57-6.9) day of the (RACs) specimens on weight loss, compressive strength and density. The results obtained confirmed that weight loss increases, but both compressive strength and density decreases after the aggressive solutions attack, however HAC seemed more aggressive. The decrease in compressive strength was (2.8-42) % and (3.2-10.8) %, while the decrease in density was (0.72-2.05) % and (0.6-1.8) % for the samples immersed in HAC and NaCl solutions respectively. The mathematical models presenting the effect of concentration of the aggressive media and immersion duration on weight loss, compressive strength and density were estimated, and the effects were optimized and modeled. The Analysis of Variance (ANOVA) revealed that an optimum compressive strength (37.8 and 34.8) MPa is obtained for the RACs immersed for 0.56 day at 0.1 Molar HAC and NaCl respectively.

scholarly journals Experimental study on the influence of recycled aggregates on the mechanical properties of concrete

2021 ◽  
Vol 283 ◽  
pp. 01033
Author(s):  
Chuangui Li ◽  
Hongkui Zhao ◽  
Jianfeng Wu ◽  
Xiangang Li ◽  
Ya Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Solid Waste ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Cohesive Force ◽  
Recycled Aggregates ◽  
Replacement Rate ◽  
Aggregate Concrete ◽  
Splitting Strength

Construction solid waste has become an important environmental pollution source in the city, and the treatment and application of construction solid waste has become the focus of attention. Construction waste recycled aggregates have defects such as high water absorption and micro cracks, which affect its extensive application. In order to improve the utilization rate of recycled aggregates, the influence of different replacement rates of recycled aggregates on the mechanical properties of concrete is studied in this paper. The results show that with the increase of replacement rate of recycled aggregates, the 3-day, 7-day and 28-day compressive strength, splitting strength and cohesive force of concrete decrease gradually, but the mechanical properties of concrete decrease slowly at 3 days and 7 days, and decrease obviously at 28 days. Moreover, with the increase of replacement rate of recycled aggregates, the decline trend of mechanical properties is not obvious. Compared with natural aggregate concrete, the 28-day compressive strength, splitting strength and cohesive force of 100% recycled aggregate concrete are reduced by 16.1%, 20.1% and 18.1% respectively, but the mechanical properties meet the requirements of C30 concrete, which provides a reference for engineering application.

scholarly journals Compressive Mechanical Properties of a Novel Recycled Aggregate Concrete with Recycled Lightweight Aggregate

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Anjun Li ◽  
Gaoqiang Zhou ◽  
Xianggang Zhang ◽  
Ercong Meng
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Lightweight Aggregate ◽  
Ultimate Strain ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Peak Strain ◽  
Replacement Ratio ◽  
Stress Strain ◽  
Aggregate Concrete

A novel recycled aggregate concrete was prepared by replacing the natural aggregate with recycled lightweight aggregate. Subsequently, the mechanical properties and compressive stress-strain constitutive relation of the recycled lightweight aggregate concrete (RLWAC) were explored. For this purpose, the recycled lightweight aggregate (RLWA) replacement ratio (0%, 25%, 50%, 75%, and 100%) was selected as a variable, and the compressive strength of 15 cube and 30 prism specimens was evaluated. The failure morphology of the specimen was subsequently characterized, along with the cubic compressive strength, axial compressive strength, peak strain, ultimate strain, and other performance indices. The influence of the replacement ratio for the specimen indices of the RLWAC was also analyzed. It was observed that the dry apparent density of RLWAC decreased gradually on increasing the replacement ratio. Compared with 0% replacement ratio, a decrease of 6.50%, 11.39%, 21.84%, and 27.54% was observed, respectively. On enhancing the RLWA replacement ratio, the compressive strength, peak strain, and ultimate strain of RLWAC were observed to be gradually reduced. As the replacement ratio was increased from 75% to 100%, the peak strain was noted to decrease the most by about 6.8%. As the replacement ratio was increased from 50% to 75%, the ultimate strain decreased the most by about 14.2%. Based on the experimental findings, the functional relationships of the strength indices and the conversion value of each strength index with the replacement ratio were also established. Finally, based on the model proposed by the existing model, the stress-strain equation of RLWAC was developed, and the fitting results were observed to be in good agreement with the test results.

Sign in / Sign up

Export Citation Format

Share Document