Crack Width Estimation Using Feed and Cascade Forward Back Propagation Artificial Neural Networks

2018 ◽  
Vol 786 ◽  
pp. 293-301 ◽  
Author(s):  
Hesham M. Shehata ◽  
Yasser S. Mohamed ◽  
Mohamed Abdellatif ◽  
Taher H. Awad
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Crack Width ◽  
Laser Scanning ◽  
Back Propagation ◽  
Maximum Width ◽  
The Neural Networks ◽  
Maximum Crack ◽  
Artificial Neural ◽  
The Cost

Automatic crack inspection techniques that limit the necessity of human have the potential to lower the cost and time of the process. In this study, a maximum crack width estimation approach is presented. Seventy nine segments of cracks are used for training the neural networks and twenty six segments are used for examination. The maximum width for each segment is measured using laser scanning microscope and segment image is captured and magnified using the microscope camera in order to obtain the extracted crack profile number of pixels. Feed and cascade forward back propagation artificial neural networks are designed and constructed. The input and output for the networks are the crack width in terms of number of pixels and the maximum estimated crack width respectively. It is shown that, the artificial neural networks technique can effectively be used to estimate the crack width. The feedforward back propagation structure which is designed with two layers and training function TRAINLM gives the best results in examination.

scholarly journals Modelling and Prediction of Photovoltaic Power Output Using Artificial Neural Networks

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Aminmohammad Saberian ◽  
H. Hizam ◽  
M. A. M. Radzi ◽  
M. Z. A. Ab Kadir ◽  
Maryam Mirzaei
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Back Propagation ◽  
General Regression Neural Network ◽  
Maximum Temperature ◽  
Photovoltaic Panel ◽  
The Neural Networks ◽  
Artificial Neural ◽  
General Regression

This paper presents a solar power modelling method using artificial neural networks (ANNs). Two neural network structures, namely, general regression neural network (GRNN) feedforward back propagation (FFBP), have been used to model a photovoltaic panel output power and approximate the generated power. Both neural networks have four inputs and one output. The inputs are maximum temperature, minimum temperature, mean temperature, and irradiance; the output is the power. The data used in this paper started from January 1, 2006, until December 31, 2010. The five years of data were split into two parts: 2006–2008 and 2009-2010; the first part was used for training and the second part was used for testing the neural networks. A mathematical equation is used to estimate the generated power. At the end, both of these networks have shown good modelling performance; however, FFBP has shown a better performance comparing with GRNN.

Prediction of Ferrite-Martensite Dual-Phase Steels Mechanical Properties by Use of Artificial Neural Networks

2013 ◽  
Vol 773-774 ◽  
pp. 268-274
Author(s):  
Amir Ghiami ◽  
Ramin Khamedi
Keyword(s):  
Mechanical Properties ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Back Propagation ◽  
Total Elongation ◽  
Ultimate Tensile Stress ◽  
Dual Phase ◽  
Dual Phase Steels ◽  
Good Ability ◽  
Artificial Neural

This paper presents an investigation of the capabilities of artificial neural networks (ANN) in predicting some mechanical properties of Ferrite-Martensite dual-phase steels applicable for different industries like auto-making. Using ANNs instead of different destructive and non-destructive tests to determine the material properties, reduces costs and reduces the need for special testing facilities. Networks were trained with use of a back propagation (BP) error algorithm. In order to provide data for training the ANNs, mechanical properties, inter-critical annealing temperature and information about the microstructures of many specimens were examined. After the ANNs were trained, the four parameters of yield stress, ultimate tensile stress, total elongation and the work hardening exponent were simulated. Finally a comparison of the predicted and experimental values indicates that the results obtained from the given input data reveal a good ability of the well-trained ANN to predict the described mechanical properties.

Rainfall Prediction by Artificial Neural Networks Trained using Different Climate Variables

2021 ◽  
Author(s):  
Mateus Alexandre da Silva ◽  
Marina Neves Merlo ◽  
Michael Silveira Thebaldi ◽  
Danton Diego Ferreira ◽  
Felipe Schwerz ◽  
...  
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Input Data ◽  
Back Propagation ◽  
Metropolitan Region ◽  
Climate Variables ◽  
Back Propagation Algorithm ◽  
Rainfall Prediction ◽  
Artificial Neural ◽  
Belo Horizonte

Abstract Predicting rainfall can prevent and mitigate damages caused by its deficit or excess, besides providing necessary tools for adequate planning for the use of water. This research aimed to predict the monthly rainfall, one month in advance, in four municipalities in the metropolitan region of Belo Horizonte, using artificial neural networks (ANN) trained with different climate variables, and to indicate the suitability of such variables as inputs to these models. The models were developed through the MATLAB® software version R2011a, using the NNTOOL toolbox. The ANN’s were trained by the multilayer perceptron architecture and the Feedforward and Back propagation algorithm, using two combinations of input data were used, with 2 and 6 variables, and one combination of input data with 3 of the 6 variables most correlated to observed rainfall from 1970 to 1999, to predict the rainfall from 2000 to 2009. The most correlated variables to the rainfall of the following month are the sequential number corresponding to the month, total rainfall and average compensated temperature, and the best performance was obtained with these variables. Furthermore, it was concluded that the performance of the models was satisfactory; however, they presented limitations for predicting months with high rainfall.

Artificial neural networks back propagation algorithm for cutting force components predictions

2013 ◽  
Vol 14 (6) ◽  
pp. 431-439 ◽  
Author(s):  
Issam Hanafi ◽  
Francisco Mata Cabrera ◽  
Abdellatif Khamlichi ◽  
Ignacio Garrido ◽  
José Tejero Manzanares
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Cutting Force ◽  
Back Propagation ◽  
Back Propagation Algorithm ◽  
Propagation Algorithm ◽  
Cutting Force Components ◽  
Artificial Neural ◽  
Force Components

Crack width in concrete using artificial neural networks

2013 ◽  
Vol 52 ◽  
pp. 676-686 ◽  
Author(s):  
Ahmed A. Elshafey ◽  
Nabil Dawood ◽  
H. Marzouk ◽  
M. Haddara
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Crack Width ◽  
Artificial Neural

Combining BP with PSO algorithms in weights optimisation and ANNs training for mass appraisal of properties

2018 ◽  
Vol 11 (2) ◽  
pp. 290-314 ◽  
Author(s):  
Joseph Awoamim Yacim ◽  
Douw Gert Brand Boshoff
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Predictive Accuracy ◽  
Back Propagation ◽  
Particle Swarm ◽  
Particle Swarm Optimisation ◽  
Content Type ◽  
Attribute Weights ◽  
Artificial Neural ◽  
And Training

Purpose The paper aims to investigate the application of particle swarm optimisation and back propagation in weights optimisation and training of artificial neural networks within the mass appraisal industry and to compare the performance with standalone back propagation, genetic algorithm with back propagation and regression models. Design/methodology/approach The study utilised linear regression modelling before the semi-log and log-log models with a sample of 3,242 single-family dwellings. This was followed by the hybrid systems in the selection of optimal attribute weights and training of the artificial neural networks. Also, the standalone back propagation algorithm was used for the network training, and finally, the performance of each model was evaluated using accuracy test statistics. Findings The study found that combining particle swarm optimisation with back propagation in global and local search for attribute weights enhances the predictive accuracy of artificial neural networks. This also enhances transparency of the process, because it shows relative importance of attributes. Research limitations/implications A robust assessment of the models’ predictive accuracy was inhibited by fewer accuracy test statistics found in the software. The research demonstrates the efficacy of combining two models in the assessment of property values. Originality/value This work demonstrated the practicability of combining particle swarm optimisation with back propagation algorithms in finding optimal weights and training of the artificial neural networks within the mass appraisal environment.

Artificial Neural Networks (ANNs) and Solution of Civil Engineering Problems

2020 ◽  
pp. 13-38
Author(s):  
Melda Yucel ◽  
Sinan Melih Nigdeli ◽  
Gebrail Bekdaş
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Structural Properties ◽  
Structural Design ◽  
Civil Engineering ◽  
Back Propagation ◽  
Training Algorithm ◽  
Design Problems ◽  
Engineering Problems ◽  
Artificial Neural

This chapter reveals the advantages of artificial neural networks (ANNs) by means of prediction success and effects on solutions for various problems. With this aim, initially, multilayer ANNs and their structural properties are explained. Then, feed-forward ANNs and a type of training algorithm called back-propagation, which was benefited for these type networks, are presented. Different structural design problems from civil engineering are optimized, and handled intended for obtaining prediction results thanks to usage of ANNs.

Optimal Design for Micromixer Using Macromodel Based on Artificial Neural Networks

2013 ◽  
Vol 339 ◽  
pp. 55-58
Author(s):  
Xue Ye Chen ◽  
Hui Xu
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Navier Stokes ◽  
Model Design ◽  
Design Variables ◽  
Input Layer ◽  
The Neural Networks ◽  
Physical Variables ◽  
Artificial Neural ◽  
Hidden Layer

The micromixer device is modeled using artificial neural networks trained with finite element simulations of the underlying incompressible Navier-Stokes and mass transport PDEs. The neural networks design is based on a three layers perceptron with one input layer, one nonlinear hidden layer and one linear output layer. The neural networks can map the micromixer behavior into a set of analytical performance functions parameterized by the systems physical variables. The macromodel has been extracted from training output of the artificial neural networks. Three design variables, i.e., the flow velocity, the channel width, and the numbers of the mixing unit are selected for model design. The mixing index at the end of the serpentine channels is employed as the objective function. The macromodel has been validated with numerical simulations. It can be demonstrated that this macromodel should facilitate the design of microfluidic device with sophisticated channels networks.

Sign in / Sign up

Export Citation Format

Share Document