Investigation of the Stress-Strain State of a Steel Column Base Connection for Seismic Regions

2022 ◽  
Vol 906 ◽  
pp. 93-98
Author(s):  
Tigran Dadayan ◽  
Lusine Karapetyan
Keyword(s):  
Reinforced Concrete ◽  
Strain State ◽  
Main Type ◽  
Industrial Building ◽  
Stress Strain ◽  
Concrete Foundation ◽  
Stress Strain State ◽  
Steel Base ◽  
Steel Column ◽  
Seismic Regions

Currently, the main type of connection between a steel column and a reinforced concrete foundation is a steel base, which is often economically unprofitable due to its size, number or diameter of anchor bolts. Not only in Armenia, but also in most countries, a steel base is the main type of connection between a steel column and a reinforced concrete foundation. The usage of other types of connections is associated with both new calculation methods and technological problems. The possibility of computation and design of the connection of a steel column with a reinforced concrete foundation in seismically active regions using shear studs is considered in this work, a reinforced concrete section with longitudinal reinforcement is used for this type of connection which ensures a smooth transfer of forces from the column to the foundation. Based on the example of the connection of a single-story industrial building column shows the change in the stress-strain state of the connection under axial force and bending moments for seismic regions. Not only the feature and construction technology of the connection considered in the work, but also proposes a calculation method with future possibility of its subsequent inclusion in the building codes of the Republic of Armenia.

Results of Numerical Modeling the Stress-Strain State of Damaged Reinforced Concrete Columns in the Middle Row of the Industrial Building

2019 ◽  
Vol 968 ◽  
pp. 342-347
Author(s):  
Viktor Dariienko ◽  
Dmytro Artemenko ◽  
Olexandr Lizunkov ◽  
Oleh Plotnikov
Keyword(s):  
Numerical Modeling ◽  
Reinforced Concrete ◽  
Strain State ◽  
Concrete Columns ◽  
Industrial Building ◽  
Reinforced Concrete Column ◽  
Stress Strain ◽  
Reinforced Concrete Columns ◽  
Stress Strain State ◽  
Concrete Body

The article is devoted to the investigation of the influence of columns’ concrete body destruction size on the bearing capacity of building structures. The joint spatial work of steel strengthening structures with reinforced concrete constructions is investigated. The results of numerical modeling the stress-strain state of damaged reinforced concrete columns in the middle row of the industrial building are presented. The numerical modeling was executed in the system NASTRAN. It was carried out the numerical calculation of reinforced concrete column in the middle row without damages. Then it was modeled the column damage in form of a "downed" concrete angle to a depth of 50, 100 and 200 mm and denudation of bearing longitudinal armature at length of 1000 mm from supporting part of the column. In this case two separate models were investigated - with the location of damage from the compressed or extended side of the column. The conclusions about feasibility of columns strengthening by steel clip are made.

scholarly journals Influence of house bearing construction rigidi-ty of precast reinforced concrete on stress-strain state Continuous Flight Auger (CFA) piles foundations

2020 ◽  
pp. 48-57
Author(s):  
Viktor Nosenko ◽  
Oleg Krivenko
Keyword(s):  
Reinforced Concrete ◽  
Strain State ◽  
Residential Buildings ◽  
Precast Concrete ◽  
Relative Deformation ◽  
Construction Time ◽  
Stress Strain ◽  
Stress Strain State ◽  
Basement Floor ◽  
The Difference

At present, the tendency to build multi-storey residential buildings has become widespread in Ukraine. This is due to a number of reasons: significant increase in land prices in cities, dense urban development and the availability of appropriate equipment for the construction of such structures. One of the most common materials for multi-storey buildings is monolithic reinforced concrete. The main advantage of monolithic structures is the possibility of free spatial planning and the possibility of uniform redistribution of forces in the elements of the frame - the house works as one rigid entire structure. On the other hand, such structures require a long construction time and appropriate highly qualified control of monolithic works. Therefore, as an alternative, prefabricated reinforced concrete structures are used to accelerate the pace of construction. In this work, the influence of the rigidity of a precast reinforced concrete house on the stress-strain state of CFA piles foundation is investigated. The stress-strain state of a precast reinforced concrete building with two basement options is analyzed: precast and monolithic.                                                 The numerical modeling of the interaction of the system elements is used as a research method: soil base - foundation - aboveground structure. It was found that the replacement in a prefabricated house only one basement floor of precast concrete on a monolithic one affects the redistribution of forces, so the self-supporting wall is loaded 2.6 times, and the busiest wall, which rests on both sides of the floor slab, is unloaded to 2.1 times.  It was found that in the case of a basement made of precast reinforced concrete with a precast basement the difference efforts in pile heads (under the load-bearing walls) can differ 1.98 times, and in the case of a monolithic one 1.17 times. So it is mean, the monolithic foundation redistributed of efforts between the piles is more uniform. It is established that the monolithic reinforced concrete basement, in comparison with the prefabricated one, reduces the uneven settlement of the foundation by 2.4 times. When designing large-panel houses, it is advisable to provide a basement floor monolithic - this will allow to load the fundamental constructions more evenly, which in its reduction reduces the relative deformation of buildings and reduces their cost.

scholarly journals STUDIES OF THE STRESS-STRAIN STATE OF REINFORCED CONCRETE BEAMS REINFORCED WITH CARBON FIBER

2021 ◽  
Vol 82 (4) ◽  
pp. 101-110
Author(s):  
I.S. Bondar ◽  
◽  
Al Dulaimi Salman Dawood Salman ◽  
D.T. Aldekeyeva ◽  
R.S. Imambaeva ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Strain State ◽  
Concrete Beams ◽  
Field Studies ◽  
Reinforced Concrete Beams ◽  
Stress Strain ◽  
Reinforced Plastics ◽  
Stress Strain State ◽  
Numerical Studies

The article examines field studies of reinforced concrete beams, fracture schemes, and the nature of the formation, development of cracks in reinforced concrete elements. Modeling the stress-strain state of reinforced concrete beams in the ANSYS software and computational complex, comparing the results of field and numerical studies. A method of finite element modeling of beams reinforced with fiber plastics (carbon fiber reinforced plastics) is proposed. A comparison of fracturing schemes obtained as a result of numerical simulation is presented.

Sign in / Sign up

Export Citation Format

Share Document