Experimental Studies of Fiber-Reinforced Concrete under Axial Tension

2021 ◽  
Vol 1038 ◽  
pp. 323-329
Author(s):  
Zlata Holovata ◽  
Daria Kirichenko ◽  
Irina Korneeva ◽  
Stepan Neutov ◽  
Marina Vyhnanets
Keyword(s):  
Reinforced Concrete ◽  
Experimental Studies ◽  
Fiber Reinforced Concrete ◽  
Load Application ◽  
Fiber Reinforced ◽  
Large Aggregate ◽  
Second Stage ◽  
Axial Tension ◽  
Deformation Properties ◽  
Fiber Concrete

The design of a stand for testing concrete and fiber-reinforced concrete specimens-"eight" in tension, which provides axial load application and minimizes the effect of stress concentration at the ends of the specimen. The design of the stand is such that the distance between the axis of load application and the central hinge is 108 cm, and between this hinge and the axis of the test specimen is 21 cm, as a result of which the load transferred to the specimen is 5.143 times greater than the applied one. At the first stage of testing, it was found that the optimal characteristics of the fiber-concrete mixture is a matrix with a large aggregate ≤ 10 mm with 1.0% fiber reinforcement. At the second stage, the ultimate strength of fiber-reinforced concrete for axial tension was determined - 1.28 MPa when reinforced with wave fiber and 1.37 MPa when reinforced with anchor fiber, which amounted to 4.1% and 4.4% of compressive strength, respectively. It was also found that concrete reinforced with anchor fiber has higher deformation properties than concrete reinforced with wave fiber.

scholarly journals Study on Damage Characteristics of Fiber Concrete under Acid Rain Erosion

2020 ◽  
Vol 198 ◽  
pp. 01010
Author(s):  
Duo Wu
Keyword(s):  
Reinforced Concrete ◽  
Acid Rain ◽  
Great Influence ◽  
Basalt Fiber ◽  
Corrosion Damage ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Damage Characteristics ◽  
Fiber Concrete ◽  
Rain Erosion

Concrete structure will be corroded under acid rain scouring and soaking for a long time, which has a great influence on its durability life. In order to further study the damage characteristics of fiber reinforced concrete under acid rain erosion, the formation mechanism of acid rain and its influence on the corrosion and deterioration of concrete and fiber materials were analyzed in this paper. Taking basalt fiber concrete as an example, the characteristics such as porosity, compressive strength and mechanical indexes were studied and analyzed. Moreover, the reasons for the optimal fiber content was briefly analyzed. The results show that the inner structure of basalt concrete mixed with 0.1% fiber was the most stable and the corrosion resistance was the most satisfying.This conclusion has certain reference significance for the corrosion damage research of fiber reinforced concrete.

scholarly journals Normal Sections Calculation of Bending Reinforced Concrete and Fiber Concrete Elements

2018 ◽  
Vol 7 (3.2) ◽  
pp. 176
Author(s):  
Dmytro Kochkarev ◽  
Tatyana Galinska ◽  
Oleksandr Tkachuk
Keyword(s):  
Reinforced Concrete ◽  
Rectangular Cross Section ◽  
Nonlinear Function ◽  
Fiber Reinforced Concrete ◽  
Deformation Model ◽  
Fiber Reinforced ◽  
Deformation Diagram ◽  
First Case ◽  
Fiber Concrete ◽  
Concrete Elements

The basic principles of the normal sections calculation of reinforced concrete and fiber reinforced concrete bending elements are considered. In the article the power and deformation methods of calculation of reinforced concrete and fiber concrete elements of rectangular cross-section are presented. The deformation model of the calculation of reinforced concrete and fiber concrete elements is presented in the framework of the method of calculation resistance of the section. This method makes possible from the common methodological positions to perform calculations of reinforced concrete and fiber concrete elements. Namely, to select reinforcement and to determine the carring capacity. The proposed deformation model for calculating fiber concrete elements is based on generally accepted preconditions. A hypothesis of plane cross sections is accepted as fair. The deformation diagram of compressed concrete is described by a nonlinear function with established parametric points. Distribution of stresses in stretched concrete is taken rectangular with corresponding coefficients which are taken depending on the type of deformation diagram. Determination of the carring capacity of fiber concrete elements occurs under extreme deformation criteria. Two cases of destruction of the investigated elements are considered. The first case is the destruction due to the achievement of limiting deformations in the concrete of the compressed zone with the simultaneous achievement of the fluidity limit in the working reinforcement. The second case is the destruction due to the achievement of limiting deformations in the concrete of the compressed zone without reaching the fluidity limit in the working reinforcement. Both cases of calculation are reduced to one functional dependence. This avoids the delimitation of different calculation cases. The main no dimensional modifier is the mechanical coefficient of reinforcement. According to the developed method, examples of calculations of reinforced concrete, fiber reinforced concrete elements and fiber concrete elements with longitudinal reinforcement are executed. The possibility of a spread variant design of reinforced concrete and fiber concrete elements is shown. 

Mechanical Properties of Polypropylene Fiber Concrete after High Temperature

2014 ◽  
Vol 662 ◽  
pp. 24-28 ◽  
Author(s):  
Xi Du ◽  
You Liang Chen ◽  
Yu Chen Li ◽  
Da Xiang Nie ◽  
Ji Huang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Concrete ◽  
Compressive Strength Of Concrete ◽  
Polypropylene Fiber Reinforced Concrete

With cooling tests on polypropylene fiber reinforced concrete and plain concrete that were initially subjected to different heating temperatures, the change of mechanical properties including mass loss, uniaxial compressive strength and microstructure were analyzed. The results show that the compressive strength of concrete tend to decrease with an increase in temperature. After experiencing high temperatures, the internal fibers of the polypropylene fiber reinforced concrete melted and left a large number of voids in it, thereby deteriorating the mechanical properties of concrete.

scholarly journals Experimental Study on Mechanical Properties of High Performance Hybrid Fiber Concrete for Shaft Lining

2021 ◽  
Vol 11 (17) ◽  
pp. 7926
Author(s):  
Qian Zhang ◽  
Wenqing Zhang ◽  
Yu Fang ◽  
Yongjie Xu ◽  
Xianwen Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Reference Group ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fiber Concrete ◽  
Shaft Lining

In order to solve the problem of highly brittle shaft lining under dynamic loading, a combination of hybrid fiber concrete mixed with steel and polypropylene fiber is proposed to make shaft lining. C60, the concrete commonly used in shaft lining, was selected as the reference group. The static mechanical properties, dynamic mechanical properties, and crack failure characteristics of the hybrid fiber concrete were experimentally studied. The test results showed that compared to the reference group concrete, the compressive strength of the hybrid fiber-reinforced concrete did not significantly increase, but the splitting tensile strength increased by 60.4%. The split Hopkinson compression bar results showed that the optimal group peak stress and peak strain of the hybrid fiber concrete increased by 58.2% and 79.2%, respectively, and the dynamic toughness increased by 68.1%. The strain distribution before visible cracks was analyzed by the DIC technology. The results showed that the strain dispersion phenomenon of the fiber-reinforced concrete specimen was stronger than that of the reference group concrete. By comparing the crack failure forms of the specimens, it was found that compared to the reference group concrete, the fiber-reinforced concrete specimens showed the characteristics of continuous and slow ductile failure. The above results suggest that HFRC has significantly high dynamic splitting tensile strength and compressive deformation capacity, as well as a certain anti-disturbance effect. It is an excellent construction material for deep mines under complex working conditions.

scholarly journals The change in impermeability of steel fiber reinforced concrete with high strength cement-sand matrix at heating

2020 ◽  
Vol 17 (1) ◽  
pp. 150-155
Author(s):  
V. A. Dorf ◽  
◽  
R. O. Krasnovskij ◽  
D. E. Kapustin ◽  
P. S. Sultygova ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Heating Temperature ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Fiber Concrete ◽  
The Matrix ◽  
Steel Fiber Concrete

The paper considers the effects of high temperatures in case of fire on the change in impermeability of steel fiber reinforced concrete having a high-strength cement-sand matrix and various content of fiber of different types, sizes, and strength. It is shown that in the temperature range from 20° to 1100° C in the diagram “Heating temperature - impermeability class», the matrix and steel fiber concrete(SFC) have a S-shaped character, and in case of heating temperature of over 100 °C, there comes a distinct decrease in impermeability.

scholarly journals Numerical and experimental studies of bent elements of basalt fiber reinforced concrete with prestressed glass composite reinforcement under static and short-term dynamic loads

2019 ◽  
Vol 221 ◽  
pp. 01026
Author(s):  
Vasilii Plevkov ◽  
Konstantin Kudyakov
Keyword(s):  
Reinforced Concrete ◽  
Experimental Studies ◽  
Basalt Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Dynamic Effects ◽  
Glass Composite ◽  
Short Term ◽  
Concrete Elements ◽  
Composite Reinforcement

The article shows studies of bending basalt fiber reinforced concrete elements with pre-stressed glass composite reinforcement under static and short-term dynamic effects. Main results of numerical and experimental studies are presented. It is experimentally established and theoretically confirmed that a significant increase in the strength and crack resistance of the normal sections of concrete bent elements is observed when using basalt fiber reinforcement and pre-stressed glass composite reinforcement.

Diagram of Non-Linear Straining of Carbon-Fiber Reinforced Concrete at Static Effect

2016 ◽  
Vol 871 ◽  
pp. 173-181 ◽  
Author(s):  
Vasiliy Plevkov ◽  
Vyacheslav Belov ◽  
Igor Baldin ◽  
Andrey Nevskiy ◽  
Anatoliy Veselov ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Concrete Strength ◽  
Experimental Studies ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Stress Strain ◽  
Non Linear ◽  
Static Effect ◽  
Carbon Fiber Reinforced

The article reflects the results of experimental studies of carbon-fiber reinforced concrete under compression and tension. Qualitative change of concrete strength and stress-strain properties at its dispersed reinforcement with carbon fibers is fixed. As a result of the statistic processing of experimental data, analytical dependencies for determination of carbon-fiber reinforced concrete main strength and stress-strain characteristics under compression and tension are suggested. Calculation diagram of non-linear straining of carbon-fiber reinforced concrete at static effect is presented.

The Equal Projection Model and Application of Short Fiber Reinforced Concrete

2012 ◽  
Vol 594-597 ◽  
pp. 959-962
Author(s):  
Yan Ru Li ◽  
Hai Bo Jiang ◽  
Ze Bao Kan
Keyword(s):  
Elastic Modulus ◽  
Reinforced Concrete ◽  
Three Dimensional ◽  
Vertical Direction ◽  
Short Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Direction ◽  
Fiber Reinforced ◽  
Projection Model ◽  
Fiber Concrete

In order to determine the fiber direction distribution statistical characteristic of short fiber reinforced concrete, this paper put forward the equal projection model. According to the isotropic assumption of large volume of short-fiber reinforced concrete, in the three-dimensional coordinate system, when the concrete loads along all coordinate axes are equal, it is believed that a representative short fiber projection components in all axes are equal. According to the deduction, the cosine of the angle of the representative fiber and the force direction is equal to the reciprocal value of the square root of 3. On this basis, as an application example, the formula for the prediction of fiber reinforced concrete elastic modulus was deduced. The formula shows that the elastic modulus of short fiber reinforced concrete is equal to the sum of 1/3 of the elastic modulus of long fiber concrete in fiber length direction and 2/3 of the elastic modulus of long fiber concrete in the vertical direction.

Sign in / Sign up

Export Citation Format

Share Document