The Study on the Application of FLEC Test in Indoor Building Materials

2007 ◽  
Vol 544-545 ◽  
pp. 905-908
Author(s):  
Shin Do Kim ◽  
Hee Kwan Lee ◽  
Chang Hwan Kim ◽  
Seo Lim Lee
Keyword(s):  
Building Materials ◽  
Test Results ◽  
Potential Error ◽  
Test Conditions ◽  
In Situ Conditions ◽  
Test Result

In this study, FLEC testing skill is tested and examined to validate its applicability to the emission tests for IAQ. FLEC system has advantages to adapt to in-situ conditions for sampling, which eases the potential error caused by the distorted test conditions in the lab. The test results from chamber test and FLEC test are also reviewed in this study and the proper guideline to correlate the FLECT test result to the chamber test result will be also produced.

scholarly journals Identification of local organic soils based on cone penetration test results

2014 ◽  
Vol 13 (2) ◽  
pp. 049-056
Author(s):  
Grzegorz Straż
Keyword(s):  
Organic Soil ◽  
Organic Soils ◽  
Test Results ◽  
Penetration Test ◽  
Cone Penetration ◽  
Penetration Testing ◽  
Cone Penetration Testing ◽  
In Situ Conditions

This paper presents the results of attempts to identify organic soils on the basis of test results performed under in situ conditions by cone penetration testing (CPT). The results of 439 selected tests were analysed which reflected the behaviour of local organic soils of organic matter ranging from 6,3 to 17,4%. Crucial to soil investigation were values measured of cone resistance (qc) and sleeve friction (fs) and the friction ratio (Rf) estimated according to those values. To identify organic soils, selected criteria were used, proposed among others by: Mayne, Marr, Bergmann, Schmertmann, Capanella and Robertson [2,5]. An analysis showed that an identification of organic soil types in terms of the present classification of standards, in view of the criteria used, is ambiguous and does not allow to identify them precisely by CPT.

Application of TDR Method for Moisture Profiles Measurement in Cellular Concrete

2014 ◽  
Vol 982 ◽  
pp. 11-15 ◽  
Author(s):  
Lukáš Fiala ◽  
Milena Pavlíková ◽  
Zbyšek Pavlík
Keyword(s):  
Moisture Content ◽  
Continuous Monitoring ◽  
Building Materials ◽  
Soil Science ◽  
In Situ Conditions ◽  
Long Time ◽  
Measured Moisture Content ◽  
Moisture Profiles ◽  
Cellular Concrete

Possible applicability of TDR method for continuous monitoring of moisture content in porous building materials is studied in the paper. TDR method, originally proposed for application in soil science, represents prospective tool for long time monitoring of moisture content in laboratory as well as in-situ conditions neglecting the effect of salts presence in researched material on accuracy of measured moisture content. The basic experimental setup of the TDR method is adjusted to the measurement of water content in building materials. The practical application of the method is presented on the measurement of moisture profiles in rod-shaped sample of cellular concrete.

Item Context and /s/ Phone Articulation Test Results

1972 ◽  
Vol 15 (4) ◽  
pp. 852-860 ◽  
Author(s):  
Zoe Zehel ◽  
Ralph L. Shelton ◽  
William B. Arndt ◽  
Virginia Wright ◽  
Mary Elbert
Keyword(s):  
Test Score ◽  
Sound Production ◽  
Broad Context ◽  
Test Results ◽  
Production Task ◽  
Test Result

Fourteen children who misarticulated some phones of the /s/ phoneme were tape recorded articulating several lists of items involving /s/. The lists included the Mc-Donald Deep Test for /s/, three lists similar to McDonald’s but altered in broad context, and an /s/ sound production task. Scores from lists were correlated, compared for differences in means, or both. Item sets determined by immediate context were also compared for differences between means. All lists were found to be significantly correlated. The comparison of means indicated that both broad and immediate context were related to test result. The estimated “omega square” statistic was used to evaluate the percentage of test score variance attributable to context.

scholarly journals Rock Surface Fungi in Deep Continental Biosphere—Exploration of Microbial Community Formation with Subsurface In Situ Biofilm Trap

2020 ◽  
Vol 9 (1) ◽  
pp. 64
Author(s):  
Maija Nuppunen-Puputti ◽  
Riikka Kietäväinen ◽  
Lotta Purkamo ◽  
Pauliina Rajala ◽  
Merja Itävaara ◽  
...  
Keyword(s):  
Significant Proportion ◽  
Debaryomyces Hansenii ◽  
Fungal Communities ◽  
Fungal Colonization ◽  
Rock Surface ◽  
Mica Schist ◽  
Deep Subsurface ◽  
Bacterial Phyla ◽  
In Situ Conditions

Fungi have an important role in nutrient cycling in most ecosystems on Earth, yet their ecology and functionality in deep continental subsurface remain unknown. Here, we report the first observations of active fungal colonization of mica schist in the deep continental biosphere and the ability of deep subsurface fungi to attach to rock surfaces under in situ conditions in groundwater at 500 and 967 m depth in Precambrian bedrock. We present an in situ subsurface biofilm trap, designed to reveal sessile microbial communities on rock surface in deep continental groundwater, using Outokumpu Deep Drill Hole, in eastern Finland, as a test site. The observed fungal phyla in Outokumpu subsurface were Basidiomycota, Ascomycota, and Mortierellomycota. In addition, significant proportion of the community represented unclassified Fungi. Sessile fungal communities on mica schist surfaces differed from the planktic fungal communities. The main bacterial phyla were Firmicutes, Proteobacteria, and Actinobacteriota. Biofilm formation on rock surfaces is a slow process and our results indicate that fungal and bacterial communities dominate the early surface attachment process, when pristine mineral surfaces are exposed to deep subsurface ecosystems. Various fungi showed statistically significant cross-kingdom correlation with both thiosulfate and sulfate reducing bacteria, e.g., SRB2 with fungi Debaryomyces hansenii.

scholarly journals Discrete element analysis of the punching behaviour of a secured drapery system: from laboratory characterization to idealized in situ conditions

2021 ◽  
Author(s):  
Antonio Pol ◽  
Fabio Gabrieli ◽  
Lorenzo Brezzi
Keyword(s):  
Mechanical Response ◽  
Steel Wire ◽  
Discrete Element ◽  
Wire Mesh ◽  
Steel Plates ◽  
Loading Conditions ◽  
Element Analysis ◽  
In Situ Conditions ◽  
Wire Meshes

AbstractIn this work, the mechanical response of a steel wire mesh panel against a punching load is studied starting from laboratory test conditions and extending the results to field applications. Wire meshes anchored with bolts and steel plates are extensively used in rockfall protection and slope stabilization. Their performances are evaluated through laboratory tests, but the mechanical constraints, the geometry and the loading conditions may strongly differ from the in situ conditions leading to incorrect estimations of the strength of the mesh. In this work, the discrete element method is used to simulate a wire mesh. After validation of the numerical mesh model against experimental data, the punching behaviour of an anchored mesh panel is investigated in order to obtain a more realistic characterization of the mesh mechanical response in field conditions. The dimension of the punching element, its position, the anchor plate size and the anchor spacing are varied, providing analytical relationships able to predict the panel response in different loading conditions. Furthermore, the mesh panel aspect ratio is analysed showing the existence of an optimal value. The results of this study can provide useful information to practitioners for designing secured drapery systems, as well as for the assessment of their safety conditions.

scholarly journals Relating Induced in Situ Conditions of Raw Chicken Breast Meat to Pinking

2004 ◽  
Vol 83 (1) ◽  
pp. 109-118 ◽  
Author(s):  
K. Holownia ◽  
M.S. Chinnan ◽  
A.E. Reynolds ◽  
JW Davis
Keyword(s):  
Chicken Breast ◽  
Breast Meat ◽  
In Situ Conditions ◽  
Chicken Breast Meat

scholarly journals A microscopic approach to investigate bacteria under in situ conditions in sea-ice samples

2001 ◽  
Vol 33 ◽  
pp. 304-310 ◽  
Author(s):  
Karen Junge ◽  
Christopher Krembs ◽  
Jody Deming ◽  
Aaron Stierle ◽  
Hajo Eicken
Keyword(s):  
Sea Ice ◽  
Pore Space ◽  
Three Dimensional ◽  
Epifluorescence Microscopy ◽  
Microbial Populations ◽  
Microbial Life ◽  
Dimensional Network ◽  
In Situ Conditions ◽  
Fluorescent Stain

AbstractMicrobial populations and activity within sea ice have been well described based on bulk measurements from melted sea-ice samples. However, melting destroys the micro-environments within the ice matrix and does not allow for examination of microbial populations at a spatial scale relevant to the organism. Here, we describe the development of a new method allowing for microscopic observations of bacteria localized within the three-dimensional network of brine inclusions in sea ice under in situ conditions. Conventional bacterial staining procedures, using the DNA-specific fluorescent stain DAPI, epifluorescence microscopy and image analysis, were adapted to examine bacteria and their associations with various surfaces within microtomed sections of sea ice at temperatures from −2° to −15°C. The utility and sensitivity of the method were demonstrated by analyzing artificial sea-ice preparations of decimal dilutions of a known bacterial culture. When applied to natural, particle-rich sea ice, the method allowed distinction between bacteria and particles at high magnification. At lower magnifications, observations of bacteria could be combined with those of other organisms and with morphology and particle content of the pore space. The method described here may ultimately aid in discerning constraints on microbial life at extremely low temperatures.

scholarly journals Influenza colloidal gold method and blood routine tests combination for rapid diagnosis of influenza: a decision tree-based analysis

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Xiaoguang Li ◽  
Jing Chen ◽  
Fei Lin ◽  
Wei Wang ◽  
Jie Xu ◽  
...  
Keyword(s):  
Decision Tree ◽  
Predictive Value ◽  
Colloidal Gold ◽  
Influenza A ◽  
Clinical Manifestations ◽  
Rapid Test ◽  
Test Results ◽  
Tree Model ◽  
Routine Blood ◽  
Test Result

AbstractRapid influenza diagnosis can facilitate targeted treatment and reduce antibiotic misuse. However, diagnosis efficacy remains unclear. This study examined the efficacy of a colloidal gold rapid test for rapid influenza diagnosis. Clinical characteristics of 520 patients with influenza-like illness presenting at a fever outpatient clinic during two influenza seasons (2017–2018; 2018–2019) were evaluated. The clinical manifestations and results of routine blood, colloidal gold, and nucleic acid tests were used to construct a decision tree with three layers, nine nodes, and five terminal nodes. The combined positive predictive value of a positive colloidal gold test result and monocyte level within 10.95–12.55% was 88.2%. The combined negative predictive value of a negative colloidal gold test result and white blood cell count > 9.075 × 109/L was 84.9%. The decision-tree model showed the satisfactory accuracy of an early influenza diagnosis based on colloidal gold and routine blood test results.

Patient recommendations for content and design for electronic return of genetic test results: An interview study among patients who accessed their genetic test results online (Preprint)

2021 ◽  
Author(s):  
Diane M Korngiebel ◽  
Kathleen McGlone West
Keyword(s):  
Patient Preferences ◽  
Genetic Test ◽  
Smartphone Application ◽  
Patient Portal ◽  
Genetic Test Result ◽  
Test Results ◽  
User Centered Design ◽  
Detailed Report ◽  
Genetic Test Results ◽  
Test Result

BACKGROUND Genetic test results will be increasingly made available electronically as more patient-facing tools are developed; however, little research has been done that collects patient preferences for content and design before creating results templates. OBJECTIVE This study identifies patient preferences for electronic return of genetic test results, including what considerations should be prioritized for content and design. METHODS Following User-Centered Design methods, 59 interviews were conducted using semi-structured protocols. The interviews explored content and design issues for patient portal results return for patients who received electronic results for specific types of genetic tests (pharmacogenomic, hereditary blood disorders, and positive and negative risk results for heritable cancers) or who had electronically received any type of genetic test result as well as a non-genetic test result. RESULTS In general, a majority of participants felt that there always needed to be some clinician involvement in electronic results return and that electronic coversheets with simple summaries would be helpful for facilitating that. Coversheet summaries could accompany, but not replace, the more detailed report. Participants had specific suggestions for those results summaries, such as only reporting the information that was most important for patients to understand, including next steps, and to do so using clear language free of medical jargon. Electronic results return should also include explicit encouragement for patients to contact providers with questions. Finally, many participants preferred to manage their care using their smartphones, particularly in instances where they needed to access health information on the go. CONCLUSIONS Participants recommended that a patient-friendly front section accompany the more detailed report and made suggestions for organization, content, and wording. Many used their smartphones regularly to access test results, therefore, health systems and patient portal software vendors should accommodate smartphone application design and web portal design concomitantly when developing results return platforms. CLINICALTRIAL N/A

Sign in / Sign up

Export Citation Format

Share Document