Texture Aspects of Deformation Processes under Equal-Channel Angular Pressing of Metals

2007 ◽  
Vol 561-565 ◽  
pp. 835-838
Author(s):  
Yuriy Perlovich ◽  
Margarita Isaenkova ◽  
Vladimir Fesenko ◽  
M. Grekhov
Keyword(s):  
Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Structure Condition ◽  
Angular Pressing ◽  
Grain Fragmentation ◽  
Deformation Processes ◽  
Distinguishing Features ◽  
Source Of Information ◽  
Mechanisms Of Plastic Deformation ◽  
Loading Scheme

The texture of Ti and Zr rods, subjected to equal-channel angular pressing (ECAP) by routes C and BC, is considered as a source of information about the actual loading scheme, operating mechanisms of plastic deformation, the structure condition of material. Processes of grain reorientation under rolling and ECAP are compared and distinguishing features of the latter are revealed. Effects of grain fragmentation and dynamic recrystallization on the texture are discussed.

scholarly journals Development of Nanostructured AA3103 by Equal Channel Angular Pressing and Thermal Treatments

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
C. J. Luis ◽  
R. Luri ◽  
J. León ◽  
I. Puertas ◽  
D. Salcedo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Thermal Treatments ◽  
Ecap Processing ◽  
Angular Pressing ◽  
Profound Knowledge ◽  
Plastic Deformation Process ◽  
Deformation Processes

This work presents a study related to the achievement of a nanometric structure in AA3103, employing severe plastic deformation processes (SPD), in this case equal channel angular pressing (ECAP). The changes in the mechanical properties and in the microstructure of AA3103 were studied after being processed by ECAP. Subsequently, scanning electron microscopy was used to determine the evolution of the microstructure after different thermal treatments on the material processed by this severe plastic deformation process. Furthermore, a more profound knowledge of the changes in the mechanical properties of this aluminium alloy was obtained. It was demonstrated that with different appropriate combinations of thermal treatments and ECAP processing, it is possible to significantly improve the mechanical properties through obtaining submicrometric grain size structures.

Incremental Equal Channel Angular Pressing for Grain Refinement

2011 ◽  
Vol 674 ◽  
pp. 19-28 ◽  
Author(s):  
Andrzej Rosochowski ◽  
Lech Olejnik
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Angular Pressing ◽  
Process Implementation ◽  
University Of Technology ◽  
Element Simulation ◽  
Ultrafine Grained ◽  
Deformation Processes ◽  
The University

Creating a small amount of ultrafine grained metals by severe plastic deformation, for example using equal channel angular pressing, is possible in many research laboratories. However, industrial production of these materials is lagging behind because of the lack of industrially viable severe plastic deformation processes. One attempt to change this situation is based on the concept of incremental equal channel angular pressing developed by the University of Strathclyde and Warsaw University of Technology. The paper describes the path the researchers took to develop the process starting from finite element simulation, through tool design and process implementation, to material characterisation. Examples of various process configurations, which enable obtaining UFG bars, plates and sheets are given and possible future developments discussed.

scholarly journals PERUBAHAN NILAI KEKERASAN DAN KONDUKTIVITAS LISTRIK ALUMINIUM AKIBAT PROSES EQUAL CHANNEL ANGULAR PRESSING (ECAP)

ROTASI ◽  
2014 ◽  
Vol 16 (4) ◽  
pp. 41
Author(s):  
Rusnaldy Rusnaldy ◽  
Norman Iskandar ◽  
Muhammad Khairul Rais ◽  
Wisnu Tri Erlangga
Keyword(s):  
Electrical Conductivity ◽  
Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Hardness Test ◽  
Hardness Measurement ◽  
Optical Microscope ◽  
Pure Aluminium ◽  
Angular Pressing ◽  
Ecap Process ◽  
Number Of Passes

In current study, Equal Channel Angular Pressing (ECAP) process was applied to pure aluminium rod. The effect of the number of passes on hardness and electrical conductivity ECAP samples was investigated. The dimensions of ECAP die for 12 mmm diameter workpieces are designed with intersect angle of 120o. The experiments were carried out by using samples cut from an ingot and a rod and machined to a size of 12 mm in diameter and 50 mm in length. The workpiece was pressed into the ECAP die up to 7 passes at room temperature.After deformation, all samples were subjected to a hardness test, an electrical conductivity test and for optical microscope study. The hardness measurement of the ECAP samples suggested that enhanced hardness would be obtained by repeating ECAP process.Increasing the electrical conductivity of the ECAP samples indicatesthat there is no dislocation formation due to increasing plastic deformation in ECAP process

scholarly journals Biocomposites Produced from Hardwood Particles by Equal Channel Angular Pressing Without Additives

2019 ◽  
Vol 3 (2) ◽  
pp. 36
Author(s):  
Yu Bai ◽  
Xiaoqing Zhang ◽  
Kenong Xia
Keyword(s):  
Thermal Stability ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Crack Formation ◽  
Cell Deformation ◽  
Processing Conditions ◽  
Ongoing Research ◽  
Angular Pressing ◽  
Wood Particles

Equal channel angular pressing (ECAP) has been shown to be a promising method for producing biocomposites from wood particles. However, severe plastic deformation during ECAP would cause considerable cracking when consolidation is carried out without a binder. In this study, the processing conditions were investigated for ECAP of hardwood particles into bulk biocomposites without any additives. Crack formation and wood cell deformation were examined in conjunction with thermal stability and crystallinity of the biocomposites. In comparison with hot pressing without severe shearing, a decrease in crystallinity and severe deformation of wood cells occurred during ECAP. Improved processability and homogeneous deformation would occur at high ECAP temperature (e.g., 210 °C) or low ECAP speed (e.g., 10 mm/min), leading to reduced crack formation in the ECAP-produced biocomposites. Despite its tendency to cause periodic cracking, effective plastic deformation in the regions between cracks was shown to improve interparticle binding. Ongoing research points to the potential achievement of crack-free hardwood (HW) consolidated without a binder, leading to significantly enhanced strength.

Sign in / Sign up

Export Citation Format

Share Document