Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing

2008 ◽  
Vol 483-484 ◽  
pp. 59-63 ◽  
Author(s):  
Manping Liu ◽  
Hans J. Roven ◽  
Yingda Yu ◽  
Jens C. Werenskiold
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Aluminium Alloy ◽  
Equal Channel Angular Pressing ◽  
Deformation Structures ◽  
Angular Pressing

Superplasticity in a 5024 Aluminium Alloy Processed by Severe Plastic Deformation

2012 ◽  
Vol 735 ◽  
pp. 353-358 ◽  
Author(s):  
Anna Mogucheva ◽  
Diana Tagirova ◽  
Rustam Kaibyshev
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Strain Rate ◽  
Aluminium Alloy ◽  
Initial Strain Rate ◽  
Strain Rates ◽  
Superplastic Behaviour ◽  
Angular Pressing ◽  
Elongation To Failure ◽  
Zr Alloy

The superplastic behaviour of an Al-4.6%Mg-0.35%Mn-0.2%Sc-0.09%Zr alloy was studied in the temperature range 250-500°C at strain rates ranging from 10-4 to 10-1 s-1. The AA5024 was subjected to equal channel angular pressing (ECAP) at 300°C up to ~12. The highest elongation-to-failure of ∼3300% was attained at a temperature of 450°C and an initial strain rate of 5.6×10-1 s-1. Regularities of superplastic behaviour of the 5024 aluminium alloy are discussed.

scholarly journals Biocomposites Produced from Hardwood Particles by Equal Channel Angular Pressing Without Additives

2019 ◽  
Vol 3 (2) ◽  
pp. 36
Author(s):  
Yu Bai ◽  
Xiaoqing Zhang ◽  
Kenong Xia
Keyword(s):  
Thermal Stability ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Crack Formation ◽  
Cell Deformation ◽  
Processing Conditions ◽  
Ongoing Research ◽  
Angular Pressing ◽  
Wood Particles

Equal channel angular pressing (ECAP) has been shown to be a promising method for producing biocomposites from wood particles. However, severe plastic deformation during ECAP would cause considerable cracking when consolidation is carried out without a binder. In this study, the processing conditions were investigated for ECAP of hardwood particles into bulk biocomposites without any additives. Crack formation and wood cell deformation were examined in conjunction with thermal stability and crystallinity of the biocomposites. In comparison with hot pressing without severe shearing, a decrease in crystallinity and severe deformation of wood cells occurred during ECAP. Improved processability and homogeneous deformation would occur at high ECAP temperature (e.g., 210 °C) or low ECAP speed (e.g., 10 mm/min), leading to reduced crack formation in the ECAP-produced biocomposites. Despite its tendency to cause periodic cracking, effective plastic deformation in the regions between cracks was shown to improve interparticle binding. Ongoing research points to the potential achievement of crack-free hardwood (HW) consolidated without a binder, leading to significantly enhanced strength.

Grain Refinement of Vanadium by Low Temperature Severe Plastic Deformation

2010 ◽  
Vol 638-642 ◽  
pp. 1934-1939 ◽  
Author(s):  
Y.B. Chun ◽  
S.H. Ahn ◽  
D.H. Shin ◽  
S.K. Hwang
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Low Temperature ◽  
Yield Strength ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Tensile Elongation ◽  
Lamellar Microstructure ◽  
Lamellar Thickness ◽  
Angular Pressing

Recent advances in the severe plastic deformation technique have shown that effective refinement of the microstructure can be achieved in pure metals as well as in alloys. Among the various methods of severe plastic deformation, equal channel angular pressing has been the subject of numerous research works. Since the grain refining effect of this technique appears to reach a peak at a level of approximately 200 nm further microstructural changes are sought—deformation at a cryogenic temperature being one of the candidate routes. In the present study, we opted to combine equal channel angular pressing and low temperature plastic deformation to refine the microstructure of commercially pure V. The starting microstructure consisted of equiaxed grains with an average size of 100 micrometers. This microstructure was refined to a 200 nm thick lamellar microstructure by 8 passes of equal channel angular pressing at 350°C. The lamellar thickness was further reduced to 140 nm upon subsequent cryogenic rolling, which resulted in room temperature yield strength of 768 MPa. In the specimens, recrystallization annealed at 850°C, the grain size reached 1000 nm or larger, and the yield strength obeyed the Hall-Petch relationship with that grain size. The tensile elongation value, which was low and insensitive to the grain size in the as-deformed state, increased significantly up to 43% with the recrystallization annealing.

Factors Influencing Ductility in Ultrafine-Grained Metals Processed by Equal-Channel Angular Pressing

2009 ◽  
Vol 633-634 ◽  
pp. 341-352 ◽  
Author(s):  
Roberto B. Figueiredo ◽  
Zhi Chao Duan ◽  
Megumi Kawasaki ◽  
Terence G. Langdon
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Equal Channel Angular Pressing ◽  
Elevated Temperatures ◽  
Testing Temperature ◽  
Ambient Temperatures ◽  
Angular Pressing ◽  
Factors Influencing ◽  
Ultrafine Grained ◽  
Processed Material

The processing of bulk metals through the application of severe plastic deformation provides an opportunity for achieving exceptional grain refinement to the submicrometer or even the nanometer range. This paper examines the characteristics of metals processed by equal-channel angular pressing with special emphasis on the levels of ductility that may be attained. It is shown that the amount of ductility is dependent not only upon the composition of the material but also, and to a major extent, upon the testing temperature. Specifically, the ductilities are often low at ambient temperatures where the strength of the as-processed material is relatively high but, by contrast, exceptionally high superplastic ductilities may be achieved over short ranges of strain rate when testing at elevated temperatures.

Equal Channel Angular Pressing of Al Alloy AA2219

2009 ◽  
Vol 67 ◽  
pp. 53-58
Author(s):  
V. Anil Kumar ◽  
M.K. Karthikeyan ◽  
Rohit Kumar Gupta ◽  
P. Ramkumar ◽  
P.P. Sinha
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Equal Channel Angular Pressing ◽  
High Strength ◽  
Dark Field ◽  
Grain Structure ◽  
Al Alloy ◽  
Angular Pressing

Severe plastic deformation processes (SPD) are gaining importance as advanced materials processing techniques and hold immense potential in obtaining ultra fine-grained high strength materials. Among the SPD techniques, Equal channel angular pressing (ECAP) has its own merits to produce materials with ultra fine grains in bulk with better mechanical properties. The material deforms with high level of plastic strain inside the channel resulting in grain refinement of the output material with improvement in mechanical properties. A very viable die configuration was conceptualized and die was made with 1200 channel angle. Processing of 25 mm dia. of Al alloy AA2219 at room temperature was successfully carried out and grain refinement was observed. The mechanism of grain refinement has been studied using optical and transmission electron microscopy (TEM). It was observed that low energy dislocation structure (LEDS) forms concurrently with sub-grain structure due to dislocation rearrangements, which provide stability to the evolving sub-grain structure. Dislocation mobility is hindered by the presence of precipitates and / or intermetallic dispersoids present in the matrix and results in presence of dislocations in grain interiors. The pile up of dislocations at intermetallic dispersoids was confirmed from the dark field TEM micrographs. Present paper describes the experimental procedure and followed to attain severe plastic deformation through ECAP. Increase in hardness as well as refinement in the grain size after 5-passes have been discussed in light of extensive optical and TEM. The mechanisms of grain refinement to achieve nano-grained structure and strengthening accrued from the grain refinement through ECAP has been discussed.

Sign in / Sign up

Export Citation Format

Share Document