Thermo Mechanical Fatigue Testing of GTD 111 Superalloy for Use in Gas Turbine Blades

2015 ◽  
Vol 830-831 ◽  
pp. 211-214 ◽  
Author(s):  
Brijesh Patel ◽  
Kalpit P. Kaurase ◽  
Anil M. Bisen
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Fatigue Testing ◽  
Material Selection ◽  
Turbine Blades ◽  
Operating Conditions ◽  
Limiting Factors ◽  
Test Results ◽  
Gas Turbine Blades ◽  
Mechanical Fatigue

Design of Turbo machinery is complex and efficiency is directly related to material performance, material selection is of prime importance. Temperature limitations are the most crucial limiting factors to gas turbine efficiencies. This paper presents the life of GTD 111 applied to gas turbine blade based on LCF and TMF test results. The LCF tests were conducted under various strain ranges based on gas turbine operating conditions. In addition, IP (in-phase) and OP (out of-phase) TMF tests were conducted under various strain ranges. The paper will focus light on above issues and each plays an important role within the Gas Turbine Material literature and ultimately influences on planning and development practices. It is expected that this comprehensive contribution will be very beneficial to everyone involved or interested in Gas Turbines.

Development and Testing of Harsh Environment, Wireless Sensor Systems for Industrial Gas Turbines

2009 ◽  
Author(s):  
David Mitchell ◽  
Anand Kulkarni ◽  
Alex Lostetter ◽  
Marcelo Schupbach ◽  
John Fraley ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Operating Conditions ◽  
Condition Based Maintenance ◽  
Harsh Environment ◽  
Sensor Systems ◽  
Wireless Telemetry ◽  
Industrial Gas Turbines

The potential for savings provided to worldwide operators of industrial gas turbines, by transitioning from the current standard of interval-based maintenance to condition-based maintenance may be in the hundreds of millions of dollars. In addition, the operational flexibility that may be obtained by knowing the historical and current condition of life-limiting components will enable more efficient use of industrial gas turbine resources, with less risk of unplanned outages as a result of off-parameter operations. To date, it has been impossible to apply true condition-based maintenance to industrial gas turbines because the extremely harsh operating conditions in the heart of a gas turbine preclude using the necessary advanced sensor systems to monitor the machine’s condition continuously. Siemens, Rove Technical Services, and Arkansas Power Electronics International are working together to develop a potentially industry-changing technology to build smart, self-aware engine components that incorporate embedded, harsh-environment-capable sensors and high temperature capable wireless telemetry systems for continuously monitoring component condition in the hot gas path turbine sections. The approach involves embedding sensors on complex shapes, such as turbine blades, embedding wireless telemetry systems in regions with temperatures that preclude the use of conventional silicon-based electronics, and successfully transmitting the sensor information from an environment very hostile to wireless signals. The results presented will include those from advanced, harsh environment sensor and wireless telemetry component development activities. In addition, results from laboratory and high temperature rig and spin testing will be discussed.

Acoustic Thermography Testing of Industrial Gas Turbine Blades in the Service Stage

2008 ◽  
Author(s):  
Mattias Broddega˚rd ◽  
Christian Homma
Keyword(s):  
Gas Turbine ◽  
Test Object ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Medium Size ◽  
Testing Time ◽  
Testing Technique ◽  
Ir Camera ◽  
Gas Turbine Blades ◽  
Industrial Gas Turbine

Gas turbine blades are operating under very demanding conditions. In modern industrial gas turbines, the rotating blades and the guide vanes of the first stages are hollow to allow internal cooling. This means that there is a possibility of having crack initiation on the internal surface of the components. Due to the complex casting geometry, this type of defects is very difficult to detect with conventional nondestructive testing techniques such as ultrasonic and radiographic testing. Siemens has developed a new non-destructive testing technique based on acoustic thermography, SIEMAT. The test object is energized by an ultrasonic excitation device. Due to the vibrations, a very slight heating will develop at cracks in the test object. The local increase of temperature is captured by a highly sensitive IR camera. The SIEMAT technique is capable of detecting both surface-breaking and internal cracks, including cracks under coatings. The testing time is very short, and the IR sequences are recorded for subsequent analysis. A major advantage for service applications is that the technique is mostly sensitive to closed defects such as cracks, since open defects where no contact between the faces is present, for example pores and scratch marks, will not cause any heat generation. Siemens is currently implementing the SIEMAT technique for assessment of service-exposed turbine blades from medium size gas turbines, which are due for reconditioning. By being able to verify that no internal cracks are present, the reliability of the reconditioned blades will be increased. This paper describes the SIEMAT testing technique, and the results obtained when applied on service-exposed industrial gas turbine blades.

Numerical Simulation on Gas Turbine Film Cooling of Curved Surface With Backward Injection

2012 ◽  
Author(s):  
Shashank Shetty ◽  
Xianchang Li ◽  
Ganesh Subbuswamy
Keyword(s):  
Numerical Simulation ◽  
Gas Turbine ◽  
Film Cooling ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Operating Conditions ◽  
Strong Mixing ◽  
Inlet Temperature ◽  
Film Cooling Effectiveness ◽  
Aerodynamic Loss

Due to the unique role of gas turbine engines in power generation and aircraft propulsion, significant effort has been made to improve the gas turbine performance. As a result, the turbine inlet temperature is usually elevated to be higher than the metal melting point. Therefore, effective cooling of gas turbines is a critical task for engines’ efficiency as well as safety and lifetime. Film cooling has been used to cool the turbine blades for many years. The main issues related to film cooling are its poor coverage, aerodynamic loss, and increase of heat transfer coefficient due to strong mixing. To overcome these problems, film cooling with backward injection has been found to produce a more uniform cooling coverage under low pressure and temperature conditions and with simple cylindrical holes. Therefore, the focus of this paper is on the performance of film cooling with backward injection at gas turbine operating conditions. By applying numerical simulation, it is observed that along the centerline on both concave and convex surfaces, the film cooling effectiveness decreases with backward injection. However, cooling along the span is improved, resulting in more uniform cooling.

scholarly journals Investigation of the Relationship between Degradation of the Coating of Gas Turbine Blades and Its Surface Color

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7843
Author(s):  
Mariusz Bogdan ◽  
Józef Błachnio ◽  
Artur Kułaszka ◽  
Dariusz Zasada
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Protective Coatings ◽  
Turbine Blades ◽  
Operating Time ◽  
Surface Color ◽  
Metallographic Examination ◽  
Gas Turbine Blades ◽  
Study Results ◽  
The Relationship

This article presents issues concerning the relationship between the degradation of the coating of gas turbine blades and changes in the color of its surface. Conclusions were preceded by the determination of parameters characterizing changes in the technical condition of protective coatings made based on a metallographic examination that defined the morphological modifications of the microstructure of the coating, chemical composition of oxides, and roughness parameters. It has been shown that an increased operating time causes parameters that characterize the condition of the blades to deteriorate significantly. Results of material tests were compared with those of blade surface color analyses performed using a videoscope. Image data were represented in two color models, i.e., RGB and L*a*b* with significant differences being observed between parameters in both representations. The study results demonstrated a relationship between the coating degradation degree and changes in the color of the blade’s surface. Among others, this approach may be used as a tool to assess the condition of turbine blades as well as entire gas turbines.

Wide Gap Braze Repair of Gas Turbine Blades and Vanes—A Review

2011 ◽  
Vol 134 (1) ◽  
Author(s):  
Xiao Huang ◽  
Warren Miglietti
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Life Cycle Cost ◽  
Turbine Blades ◽  
Advanced Materials ◽  
Gas Turbine Blades ◽  
Rare Elements ◽  
Compositional Choices ◽  
Useful Life ◽  
Wide Gap

Gas turbine blades and vanes in modern gas turbines are subjected to an extremely hostile environment. As such, sophisticated airfoil designs and advanced materials have been developed to meet stringent demands and at the same time, ensure increased performance. Despite the evolution of long-life airfoils, damage still occurs during service thus limiting the useful life of these components. Effective repair of after-service components provides life-cycle cost reduction of engines, and as well, contributes to the preservation of rare elements heavily used in modern superalloys. Among these methods developed in the last four decades for the refurbishment and joining of superalloy components, wide gap brazing (WGB) technology has been increasingly used in the field owing to its ability to repair difficult to weld alloys, to build up substantially damaged areas in one operation, and to provide unlimited compositional choices to enhance the properties of the repaired region. In this paper, the historical development of wide gap repair technology currently used in industry is reviewed. The microstructures and mechanical properties of different WGB joints are compared and discussed. Subsequently, different WGB processes employed at major OEMs are summarized. To conclude this review, future developments in WGB repair of newer generations of superalloys are explored.

Rejuvenation Heat Treatment of Single Crystal Gas Turbine Blades

2017 ◽  
Author(s):  
J. Kuipers ◽  
K. Wiens ◽  
B. Ruggiero
Keyword(s):  
Heat Treatment ◽  
Single Crystal ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Damage Mechanism ◽  
Operating Conditions ◽  
Gas Turbine Blades ◽  
Full Solution ◽  
Fatigue Endurance ◽  
Root Surfaces

Thermal degradation of precipitation-hardened nickel based superalloys has been demonstrated to be reversible through full solution rejuvenation heat treatment processing. The specific concern with full solution rejuvenation heat treatment of single crystal alloys is the formation of recrystallized grains on surfaces with residual stress. The threshold temperature for recrystallization and the effect of heat treatment temperature and time on recrystallization depth were evaluated on service run industrial gas turbine blades comprised of nickel based single crystal alloys René N5 and RR2000. Recrystallization of rejuvenated blades was observed on the root surfaces of blades which had been shot peened at original manufacture and/or during a prior repair. Blades which did not receive peening at manufacture were free of recrystallization in critical areas following full solution rejuvenation heat treatment. Given that gas turbine blade roots operate at relatively low temperatures compared to the airfoil, creep is not considered a life limiting damage mechanism for this region of the blade. Rather, high cycle fatigue is considered the primary damage mechanism of concern. As such, fatigue testing of shot peened and heat treated (recrystallized) René N5 specimens was carried out at 650°C at various stress levels in comparison with baseline (non-recrystallized) specimens to determine the extent to which recrystallization would limit fatigue endurance at blade root operating conditions. It was found that recrystallization did not reduce the fatigue endurance relative to baseline samples at the tested conditions. The findings indicate that repair including full solution rejuvenation heat treatment of previously peened blades comprised of René N5 alloy is feasible provided that recrystallization be limited to root surfaces.

scholarly journals High temperature fatigue testing of gas turbine blades

2017 ◽  
Vol 7 ◽  
pp. 206-213 ◽  
Author(s):  
M. Beghini ◽  
L. Bertini ◽  
C. Santus ◽  
B.D. Monelli ◽  
E. Scrinzi ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Fatigue Testing ◽  
Turbine Blades ◽  
Gas Turbine Blades ◽  
High Temperature Fatigue

scholarly journals Turbulent Flow and Heat Transfer in Gas Turbine Blade Cooling Passages

1992 ◽  
Author(s):  
F. J. Cunha
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Air Cooling ◽  
Turbine Blade Cooling ◽  
Gas Turbine Blades ◽  
Analysis Methodology

A numerical analysis methodology has been created to predict the heat transfer within the air cooling passages of gas turbine blades. In this paper, the turbulent flow heat convection with developed velocity and temperature fields is studied for cavities with turbulators. The influence of Coriolis forces and rotational buoyancy effects were also included. The k-equation turbulence model was employed over most of the cross section while a modified Van Driest’s version of the mixing length hypothesis is used in the near-wall sublayer. This methodology was successfully benchmarked against experimental results for air cooling passages of turbine blades. Analytical results are presented in terms of the Reynolds, Rossby and rotational Rayleigh numbers for realistic operating conditions.

Sign in / Sign up

Export Citation Format

Share Document