A Novel Nano-TiO2 Additive Oil-in-Water Lubricant for Hot Steel Rolling

2016 ◽  
Vol 861 ◽  
pp. 201-206 ◽  
Author(s):  
Wen Zhen Xia ◽  
Jing Wei Zhao ◽  
Hui Wu ◽  
Si Hai Jiao ◽  
Xian Ming Zhao ◽  
...  
Keyword(s):  
Adhesion Force ◽  
Rolling Force ◽  
Low Cost ◽  
Work Roll ◽  
Steel Rolling ◽  
Oil In Water ◽  
Effective Lubricant ◽  
Water Lubricant ◽  
Hot Rolled

To obtain a low cost, environmentally friendly and effective lubricant, a novel nanoTiO2 additive oil-in-water (O/W) lubricant for hot steel rolling has been developed. Based on the contact angle, tribological and hot rolling tests, the performance of the nanoTiO2 additive O/W lubricants was evaluated and discussed. The results show that the strongest adhesion force between the nanoTiO2 additive O/W lubricant and the work roll is obtained after addition of 4% nanoTiO2 additive in the 1% O/W lubricant. The nanoTiO2 nanoparticles can reduce coefficient of friction (COF) and rolling force, and enhance the surface quality of the hot-rolled product. The lubrication mechanism of nanoTiO2 additive O/W-based lubricant has been proposed.

Study on the Prediction of Rolling Force of 16MnR Hot Rolled Plate

2013 ◽  
Vol 753-755 ◽  
pp. 163-166
Author(s):  
Xiao Long Li ◽  
Ying Li Wei ◽  
Yuan Zhang ◽  
Ya Qiang Tian ◽  
Jin Ying Song ◽  
...  
Keyword(s):  
Rolling Force ◽  
Process Analysis ◽  
Rolling Process ◽  
Rolled Plate ◽  
Process Equipment ◽  
Traditional Concept ◽  
Steel Rolling ◽  
Hot Rolling Process ◽  
Rolling Load ◽  
Hot Rolled

Considering the insufficient recrystallization of austenite has an effect on deformation resistance, meanwhile, referring to the plate of controlling parameters in the hot rolling process, analysis and forecast of load parameters of rolling mill and motor per pass of its rolling process. The result shows that: The production of modern steel rolling, involved in the process, equipment problems associated with rolling load, must be taken into account in its internal organization of metal in the deformation process. The less recrystallization is, the greater the deviation of the calculated results. This should be distinguished from the traditional concept of rolling.

Study on Tribological Property of Nano-TiO2 Additive Oil-in-Water Lubricant during Hot Rolling

2016 ◽  
Vol 874 ◽  
pp. 381-386 ◽  
Author(s):  
Wen Zhen Xia ◽  
Jing Wei Zhao ◽  
Hui Wu ◽  
Si Hai Jiao ◽  
Zheng Yi Jiang
Keyword(s):  
Power Consumption ◽  
Oxide Scale ◽  
Hot Rolling ◽  
Tribological Property ◽  
Rolling Force ◽  
Work Roll ◽  
Rolling Process ◽  
Tribological Behaviour ◽  
Oil In Water ◽  
The Coefficient Of Friction

Oxide scale formed on the steel surface during hot rolling affects the tribological property of nanoTiO2 additive oil-in-water (O/W) lubricant, resulting in changes of roll forces, torques and power consumption, as well as the wear and the surface quality of the work roll and workpiece in hot rolling. The nanoparticle additive O/W emulsion is a novel lubricant and has a great potential to be used in hot rolling process. However, little research has focused on the nanoparticle additive O/W emulsion. In this study, oxidation, tribological and hot rolling tests were conducted to investigate the tribological behaviour of nanoTiO2 additive O/W lubricant. The results indicate that the surface morphology of the oxide scale plays an important role in tribological behaviour of nanoTiO2 additive O/W lubricants. The coefficient of friction (COF) and rolling force are reduced with the addition of nanoTiO2 particles into the 1.0% (mass %, oil concentration) O/W lubricant. This study is helpful in applying the nanoTiO2 additive O/W lubricant during hot rolling to realise reduction of rolling force and power consumption.

Effect of Computerized Auditory Training on Speech Perception of Adults With Hearing Impairment

2013 ◽  
Vol 20 (3) ◽  
pp. 91-106 ◽  
Author(s):  
Rachel Pizarek ◽  
Valeriy Shafiro ◽  
Patricia McCarthy
Keyword(s):  
Hearing Loss ◽  
Speech Perception ◽  
Literature Review ◽  
Low Cost ◽  
Experimental Designs ◽  
Auditory Training ◽  
Hearing Impairments ◽  
Communicative Disorders ◽  
And Training

Computerized auditory training (CAT) is a convenient, low-cost approach to improving communication of individuals with hearing loss or other communicative disorders. A number of CAT programs are being marketed to patients and audiologists. The present literature review is an examination of evidence for the effectiveness of CAT in improving speech perception in adults with hearing impairments. Six current CAT programs, used in 9 published studies, were reviewed. In all 9 studies, some benefit of CAT for speech perception was demonstrated. Although these results are encouraging, the overall quality of available evidence remains low, and many programs currently on the market have not yet been evaluated. Thus, caution is needed when selecting CAT programs for specific patients. It is hoped that future researchers will (a) examine a greater number of CAT programs using more rigorous experimental designs, (b) determine which program features and training regimens are most effective, and (c) indicate which patients may benefit from CAT the most.

AISI 1030

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Fine Grain ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1030 is a plain carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered conditions for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data are on a single heat of fine-grain steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-94. Producer or source: Carbon and alloy steel mills.

AISI 1040

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

SAE 1037

Alloy Digest ◽  
1979 ◽  
Vol 28 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1039

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Cost ◽  
Manganese Content ◽  
Heat Treating ◽  
General Purpose ◽  
Carbon Steels ◽  
The Other ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAF 1039 steel can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-66. Producer or source: Carbon steel mills.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

scholarly journals Diagnostic Capabilities of a Smartphone- Based Low-Cost Microscope

2020 ◽  
Vol 6 (3) ◽  
pp. 522-525
Author(s):  
Dorina Hasselbeck ◽  
Max B. Schäfer ◽  
Kent W. Stewart ◽  
Peter P. Pott
Keyword(s):  
Low Cost ◽  
Field Of View ◽  
Parasitic Diseases ◽  
Optical Parameters ◽  
Trade Off ◽  
Resource Limited ◽  
Wide Range ◽  
Diagnostic Applications ◽  
Diagnostic Capabilities

AbstractMicroscopy enables fast and effective diagnostics. However, in resource-limited regions microscopy is not accessible to everyone. Smartphone-based low-cost microscopes could be a powerful tool for diagnostic and educational purposes. In this paper, the imaging quality of a smartphone-based microscope with four different optical parameters is presented and a systematic overview of the resulting diagnostic applications is given. With the chosen configuration, aiming for a reasonable trade-off, an average resolution of 1.23 μm and a field of view of 1.12 mm2 was achieved. This enables a wide range of diagnostic applications such as the diagnosis of Malaria and other parasitic diseases.

Sign in / Sign up

Export Citation Format

Share Document