Microstructural Characterization of Ornamental Rock Samples: Cariri Rocks

2016 ◽  
Vol 869 ◽  
pp. 159-163
Author(s):  
Danúbia Lisbôa da Costa ◽  
Ingrid Mayara Medeiros Fernandes ◽  
Aluska Nascimento Simões Braga ◽  
Rosiane Maria da Costa Farias ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Microstructural Characterization ◽  
Magnesium Carbonate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineral Sector ◽  
Microstructural Heterogeneity ◽  
Calcium And Magnesium ◽  
Application Fields

Ornamental rocks are among the most promising business areas of the mineral sector, raising the necessity for, besides beauty, investments in quality, safety and characterization in the various application fields of these rocks. So, this work aims at the microstructural characterization of the class of these rocks: the Cariri Rocks, also known the limestone, which are calcareous rocks mainly formed by calcium and magnesium carbonate, possibly presenting variations due to their origins. For characterization, we studied four samples, being two from Chapada do Apodi and two from Chapada do Araripe, characterized physically and micro-structurally through chemical analysis, X-ray diffraction, optical micrography and porosimetry tests. The results prove that the limestones are calcitic and dolomitic, and present porosity varying from 5 to 15%, with pores concentration between 100nm and 10μm, besides the high microstructural heterogeneity.

New Coordination Compounds of Fe(III) with Organic Ligands

2009 ◽  
Vol 59 (12) ◽  
Author(s):  
Mihaela Flondor ◽  
Ioan Rosca ◽  
Doina Sibiescu ◽  
Mihaela-Aurelia Vizitiu ◽  
Daniel-Mircea Sutiman ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Complex Compounds ◽  
Organic Ligands ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Chemical Analysis ◽  
Structural Formulae ◽  
Paramagnetic Properties

In this paper the synthesis and the study of some complex compounds of Fe(III) with ligands derived from: 2-(4-chloro-phenylsulfanyl)-1-(2-hydroxy-3,5-diiodo-phenyl)-ethanone (HL1), 1-(3,5-dibromo-2-hydroxy-phenyl)-2-phenylsulfanyl-ethanone(HL2), and 2-(4-chloro-phenylsulfanyl)-1-(3,5-dibromo-2-hydroxy-phenyl)-ethanone (HL3) is presented. The characterization of these complexes is based on method as: the elemental chemical analysis, IR and ESR spectroscopy, M�ssbauer, the thermogravimetric analysis and X-ray diffraction. Study of the IR and chemical analysis has evidenced that the precipitates form are a complexes and the combination ratio of M:L is 1:2. The central atoms of Fe(III) presented paramagnetic properties and a octaedric hybridization. Starting from this precipitation reactions, a method for the gravimetric determination of Fe(III) with this organic ligands has been possible. Based on the experimental data on literature indications, the structural formulae of the complex compounds are assigned.

Influence of the Residue of Casting by Lost Wax in the Modulus of Elasticity and Porosity of Concretes

2014 ◽  
Vol 805 ◽  
pp. 343-349
Author(s):  
Carine F. Machado ◽  
Weber G. Moravia
Keyword(s):  
Construction Industry ◽  
Modulus Of Elasticity ◽  
Chemical Characterization ◽  
Microstructural Characterization ◽  
Cement Matrix ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hardened State ◽  
Material Powder

This work evaluated the influence of additions of the ceramic shell residue (CSR), from the industries of Lost Wax Casting, in the modulus of elasticity and porosity of concrete. The CSR was ground and underwent a physical, chemical, and microstructural characterization. It was also analyzed, the environmental risk of the residue. In the physical characterization of the residue were analyzed, the surface area, and particle size distribution. In chemical characterization, the material powder was subjected to testing of X-ray fluorescence (XRF). Microstructural characterization was performed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The residue was utilized like addition by substitution of cement in concrete in the percentages of 10% and 15% by weight of Portland cement. It was evaluated properties of concrete in the fresh and hardened state, such as compressive strength, modulus of elasticity, absorption of water by total immersion and by capillarity. The results showed that the residue can be used in cement matrix and improve some properties of concrete. Thus, the CSR may contribute to improved sustainability and benefit the construction industry.

Purification of Bentonite Clays from Cubati, PB, Brazil, for Diversified Applications

2014 ◽  
Vol 805 ◽  
pp. 486-491
Author(s):  
J.M.R. Figueirêdo ◽  
Juliana Melo Cartaxo ◽  
I.A. Silva ◽  
C.D. Silva ◽  
Gelmires Araújo Neves ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Analysis ◽  
Laser Diffraction ◽  
The State ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granulometric Analysis ◽  
Bentonite Clays

The State of Paraíba, Brazil, retains about 88.5% of all Brazilian bentonite, and much of this production comes from deposits in the District of Boa Vista, PB. Nevertheless, the deposits are almost depleted. Recently, new deposits were found, which will increases the reserves of the State, in the regions of Cubati and Pedra Lavrada, PB. The objective of this work is to characterize and develop purified clays, through sieving and hydrocycloning techniques, from those recently discovered bentonites for several applications. The characterization of the sample was done through granulometric analysis by laser diffraction, X-ray diffraction, chemical analysis by X-ray fluorescence, and thermogravimetric and differential thermal analysis. The results show that the samples are typical of bentonite clays, and that the purification solely by hydrocyclone presents the best results.

Structural and IR-spectroscopic characterization of magnesium acesulfamate

2016 ◽  
Vol 71 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Oscar E. Piro ◽  
Gustavo A. Echeverría ◽  
Beatriz S. Parajón-Costa ◽  
Enrique J. Baran
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Elemental Analysis ◽  
Spectroscopic Characterization ◽  
Magnesium Carbonate ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Ir Spectroscopic

AbstractMagnesium acesulfamate, Mg(C4H4NO4S)2·6H2O, was prepared by the reaction of acesulfamic acid and magnesium carbonate in aqueous solution, and characterized by elemental analysis. Its crystal structure was determined by single crystal X-ray diffraction methods. The substance crystallizes in the triclinic space group P1̅ with one molecule per unit cell. The FTIR spectrum of the compound was also recorded and is briefly discussed. Some comparisons with other simple acesulfamate and saccharinate salts are also made.

Molecular and microstructural characterization of lecithin-based oleogels made with vegetable oil

RSC Advances ◽  
2016 ◽  
Vol 6 (53) ◽  
pp. 47373-47381 ◽  
Author(s):  
Maxime Bodennec ◽  
Qing Guo ◽  
Dérick Rousseau
Keyword(s):  
Vegetable Oil ◽  
Small Angle ◽  
Microstructural Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
3D Network

Lecithin-based oleogels consist of a worm-like entangled fibrous 3D network. Small angle X-ray diffraction suggests that these microfibres are formed by the packing of reverse hexagonal (HII) tubules parallel to the axis of fibres.

Microstructural Characterization of Glass-to-Metal Brazed Joint

2012 ◽  
Vol 616-618 ◽  
pp. 1732-1735 ◽  
Author(s):  
Xi Hai Shen ◽  
Yu Gang Zheng ◽  
Liang Chang ◽  
Jin Jia Guo ◽  
Song Bin Ye ◽  
...  
Keyword(s):  
Thermal Power ◽  
Microstructural Characterization ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solar Thermal Power ◽  
Brazed Joints ◽  
Brazed Joint ◽  
Scanning Electron

Aiming at the glass-to-metal seals serving in the Solar Thermal Power (STP), glass-to-metal vacuum brazed joints were studied. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were performed to examine the microstructure and element contents of interface seam on the glass-to-metal vacuum brazed joints. Also, the compositional concentration of the interface seam was measured by using energy dispersive spectroscopy (EDS).

Microstructure and Properties of Nanosemicrystalline Si3N4 Ceramics with Doped Sintering Additives: Part I. Microstructural Characterization of Nanosemicrystalline Si3N4 Powders

1998 ◽  
Vol 13 (9) ◽  
pp. 2580-2587 ◽  
Author(s):  
K. H. Ryu ◽  
J-M. Yang
Keyword(s):  
Microstructural Characterization ◽  
Degree Of Crystallinity ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sintering Additives ◽  
Transmission Electron ◽  
Wet Chemical ◽  
Si3n4 Ceramics

The characteristics of nanosized silicon nitride powders with doped Y2O3 and Al2O3 fabricated by a plasma-reacted chemical process were investigated. The chemical compositions of the powders were analyzed by wet chemical analysis. The morphology and the size distribution were determined by transmission electron microscopy (TEM). TEM with energy dispersive spectroscopy (EDS) was used to verify the existence of sintering additives in each individual particle. The crystal structure of the powders was identified by the selected area diffraction pattern (SADP). X-ray diffraction (XRD) technique was used for phase analysis and the measurement of degree of crystallinity. The characteristics of chemical bonding was analyzed by using Fourier transform infrared spectroscopy (FTIR).

Microstructural Characterization of Ba2YCu3O7 Films Produced by Co-Evaporation

1987 ◽  
Vol 99 ◽  
Author(s):  
G. J. Fisanick ◽  
P. Mankeewicht ◽  
W. Skocpolt ◽  
R. E. Howardt ◽  
A. Dayem ◽  
...  
Keyword(s):  
Plane Surface ◽  
Depth Profiling ◽  
Microstructural Characterization ◽  
Areal Density ◽  
Oxygen Stoichiometry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Annealing Conditions ◽  
Auger Microscopy

ABSTRACTBa2YCu3O7 films produced by co-evaporation of BaF2, Cu and Y onto <100> S1TiO3 substrates in an O2 ambient followed by post-annealing were analyzed using RBS, X-ray diffraction and Auger microscopy. These films exhibit Tc's (R=0) of =90K and a best Jc of > 1.0×106 A/cm2 at 81K for a =2500A thick film. RBS and Auger depth profiling limit the level of F present in the post-annealed films to <5 at. %, although F is evident in the as-deposited material. RBS channeling experiments yield a Xmin=31%, demonstrating the epitaxial quality of the films. X-ray diffraction shows that the films are predominantly oriented with c-axis perpendicular to the substrate, with narrow mosaic spread in-plane. A small portion of the film is in the form of needles oriented with a-axis perpendicular to the substrate, whose areal density is dependent on annealing conditions and local film stoichiometry. Scanning Auger microscopy confirms that the needles and c-axis plateaus have the same metal and oxygen stoichiometry. Also present in the film are insulating balls which appear to nucleate terraces in the c-axis perpendicular structure. Scanning Auger shows that these features are also close to the metals stoichiometry, but are C rich compared to the needles. The plateaus are covered with =11 times more C than the needles, indicating that the basal plane surface is highly reactive. Auger depth profiling and RBS show little evidence for interdiffusion.

Sign in / Sign up

Export Citation Format

Share Document