Micro Structural Changes in Welded AlCuLi-Alloys by Positron Annihilation Spectroscopy, SAXS and DSC

2016 ◽  
Vol 877 ◽  
pp. 387-392
Author(s):  
Danny Petschke ◽  
Torsten E.M. Staab
Keyword(s):  
Positron Annihilation ◽  
Structural Changes ◽  
Base Material ◽  
Positron Annihilation Spectroscopy ◽  
Weld Nugget ◽  
Scanning Calorimetry ◽  
Positron Annihilation Lifetime ◽  
Friction Stir ◽  
X Ray Scattering ◽  
Type Size

We follow changes in the micro structure at several distances from the weld nugget of friction stir welded AlCuLi-alloy (AA2198) plates occurring due to the tool movement and the created heat by employing different methods: Small Angle X-ray Scattering (SAXS), giving information on type, size and density of precipitates, Differential Scanning Calorimetry (DSC), giving information on formed precipitates by their dissolution signal, and positron annihilation lifetime spectroscopy (PALS), being sensitive to vacancies and dislocations as well as to the formation and growth of precipitates. We start by characterizing the base material as a reference and proceed via the heat-affected zone to the weld nugget. By the use of complementary methods, we obtain information on structure, kind and distribution of precipitates and correlate this with hardness measurements.

scholarly journals Study on the structure of polymer electrolyte membrane using small angle X-ray scattering and positron annihilation spectroscopy

2018 ◽  
Vol 1 (6) ◽  
pp. 197-205
Author(s):  
Tap Duy Tran ◽  
Khiem Duy Do ◽  
Nguyen Ly La ◽  
Tuyet Anh Luu
Keyword(s):  
Polymer Electrolyte ◽  
Positron Annihilation ◽  
Small Angle ◽  
Polymer Electrolyte Membrane ◽  
Positron Annihilation Spectroscopy ◽  
Positron Annihilation Lifetime ◽  
Amorphous Phases ◽  
Electrolyte Membrane ◽  
X Ray Scattering ◽  
Poly Ethylene

The structure of poly (styrenesulfonic acid)- grafted poly(ethylene-co- tetrafluoroethylene) polymer electrolyte membrane (ETFE-PEM) was investigated by comparison with those of precursor original ETFE film and styrene-grafted films (grafted-ETFE) using positron annihilation lifetime spectroscopy (PALS) and small angle Xray scattering (SAXS). PALS of these samples indicated that there were two lifetime components, which were assigned to the annihilation of ortho- Positronium (o-Ps). The two types of o-Ps relate to the free volume at sub nanoscale locating in the crystalline and amorphous phases. SAXS profiles of these samples indicated the presence of lamellar stacks andlamellar grains. Sizes of lamellar stacks and lamellar grains varied significantly during the graftingprocess, whereas only change a little bit at sulfonation process and at wet state. A compination of PALS and SAXS allowed us to investigate the structures of ETFEPEMs with scale ranging from several Ångströms to micrometer.

Annihilation Lifetime Spectroscopy Using Positrons from Bremsstrahlung Production

2012 ◽  
Vol 331 ◽  
pp. 41-52 ◽  
Author(s):  
Andreas Wagner ◽  
Wolfgang Anwand ◽  
Maik Butterling ◽  
Thomas E. Cowan ◽  
Fine Fiedler ◽  
...  
Keyword(s):  
Positron Annihilation ◽  
Linear Accelerator ◽  
Electron Accelerator ◽  
Positron Annihilation Spectroscopy ◽  
Doppler Broadening ◽  
Electron Linear Accelerator ◽  
Positron Annihilation Lifetime ◽  
Electron Bremsstrahlung ◽  
New Type ◽  
Set Up

A new type of a positron annihilation lifetime spectroscopy (PALS) system has been set up at the superconducting electron accelerator ELBE [ at Helmholtz-Zentrum Dresden-Rossendorf. In contrast to existing source-based PALS systems, the approach described here makes use of an intense photon beam from electron bremsstrahlung which converts through pair production into positrons inside the sample under study. The article focusses on the production of intense bremsstrahlung using a superconducting electron linear accelerator, the production of positrons inside the sample under study, the efficient detector setup which allows for annihilation lifetime and Doppler-broadening spectroscopy simultaneously. Selected examples of positron annihilation spectroscopy are presented.

Positron Annihilation Lifetime Measurements in Collagen Biopolymer

1998 ◽  
Vol 530 ◽  
Author(s):  
S. Siles ◽  
G. Moya ◽  
X.H. Li ◽  
J. Kansy ◽  
P. Moser
Keyword(s):  
Positron Annihilation ◽  
Amorphous Region ◽  
Positron Annihilation Spectroscopy ◽  
Lifetime Data ◽  
Spectroscopy Technique ◽  
Lifetime Measurements ◽  
Lifetime Distributions ◽  
Positron Annihilation Lifetime ◽  
Coincidence System ◽  
Three Components

AbstractLifetime measurement in Positron Annihilation Spectroscopy (PAS) is applied to the study of free-volume collagen characteristics as a function of concentration. The lifetimes of positrons were obtained by a conventional fast-fast coincidence system. All lifetime data are fitted in three components by using the computer program POSITRON FIT and resolved. For each concentration, lifetime distributions were analyzed in order to obtain the different components, thus we have observed three components of which a long component τ3. This long lived component can be associated with a pick-off annihilation of ortho-positronium (o-Ps) trapped in free volumes of amorphous region. This investigation shows the potential of the positron annihilation spectroscopy technique in the study of biopolymer microstructures.

POSITRON INTERACTION IN POLYMERS

2004 ◽  
Vol 19 (23) ◽  
pp. 3951-3959 ◽  
Author(s):  
CORINE BAS ◽  
N. DOMINIQUE ALBÉROLA ◽  
MARIE-FRANCE BARTHE ◽  
JÉRÉMIE De BAERDEMAEKER ◽  
CHARLES DAUWE
Keyword(s):  
Positron Annihilation ◽  
Chemical Structure ◽  
Positron Beam ◽  
Positron Annihilation Spectroscopy ◽  
Hole Size ◽  
Doppler Broadening ◽  
Positron Source ◽  
Positron Annihilation Lifetime ◽  
Doppler Broadening Spectra ◽  
Variable Energy

A series of dense copolyimide membranes was characterized using positron annihilation spectroscopy. The positron annihilation lifetime spectroscopy performed on film with a classical positron source gives informations on the positronium fraction formed and also on the hole size within the film. The Doppler broadening spectra (DBS) of the gamma annihilation rays coupled with a variable energy positron beam allow the microstructural analyses as a function of the film depth. Experimental data were also linked to the chemical structure of the polyimides. It was found that the presence of the fluorine atoms strongly affects the positron annihilitation process and especially the DBS responses.

Mechanical Properties and Corrosion Resistance of Friction Stir Welded Dissimilar Aluminum Alloys 2219 to 5083

2015 ◽  
Vol 813-814 ◽  
pp. 203-207
Author(s):  
M. Koilraj ◽  
A. Sathesh Kumar ◽  
D.L. Belgin Paul ◽  
S.R. Koteswara Rao
Keyword(s):  
Base Material ◽  
Welding Process ◽  
Weld Nugget ◽  
Welding Parameters ◽  
General Corrosion ◽  
Test Results ◽  
Friction Stir ◽  
Dissimilar Aluminum Alloys ◽  
Shoulder Diameter ◽  
Mechanical Properties And Corrosion

In this paper, 6 mm thickness dissimilar aluminium alloys of 5083 (H321) and 2219 (O) butt joints were fabricated successfully by friction stir welding process. The quality joints were obtained for the welding parameters of 35 mm/min and 650 rpm with the shoulder diameter to pin diameter ratio as 3. Macrostructure study shows that the interface between the weld nugget and TMAZ is smooth and clear with a flow arm extending towards the top surface of the weld in the 2219 side. The boundary on the 5083 side between the weld nugget and the TMAZ was irregular. The obtained joint efficiency is around 92.57% based on the UTS of the softer material (AA2219). The tensile test results showed that the specimens failed in the heat affected zone of the softer base material 2219. The hardness values in the stirred zone are higher than the softer base material of alloy 2219. The friction stir welded dissimilar joint 2219-5083 exhibited better general corrosion characteristics than the 2219-2219 weld and 2219 base material.

scholarly journals Study of multiblock polyamide-6/Poly-(isoprene) copolymers by positron annihilation spectroscopy

2008 ◽  
Vol 6 (4) ◽  
pp. 575-580 ◽  
Author(s):  
R. Bryaskova ◽  
R. Mateva ◽  
N. Djourelov ◽  
M. Krasteva
Keyword(s):  
Positron Annihilation ◽  
Free Volume ◽  
Main Chain ◽  
Positron Annihilation Spectroscopy ◽  
Polyamide 6 ◽  
Positron Annihilation Lifetime Spectroscopy ◽  
Degree Of Crystallinity ◽  
Doppler Broadening ◽  
Annihilation Line ◽  
Positron Annihilation Lifetime

AbstractPositron annihilation lifetime spectroscopy (PALS) has been used to determine the free volume in multiblock polyamide-6/poly-(isoprene) copolymers (PA-6/PI), synthesized via activated anionic bulk copolymerization. The diisocyanate functionalized telechelic PI, blocked with caprolactam (CL) has been used as a commoner and an activator at the same time. The elastic PI block incorporated into the main chain of PA-6 affects the amorphous and crystal phase of the copolymer leading to changing in degree of crystallinity. The positron annihilation lifetime spectroscopy (PAL) and Doppler broadening of annihilation line (DBAL) technique in a set of pure PA-6 and PA-6/PI copolymers with two different compositions have been applied and evaluation of the size of free-volume holes (pores), localized mainly in the disordered regions of the PA-6/PI copolymer by measuring the o-Ps lifetime (τ3) and o-Ps intensity (I3) has been performed.

Sign in / Sign up

Export Citation Format

Share Document