Design and Analysis of State Transport Utility Vehicle-Bus

2019 ◽  
Vol 11 (2) ◽  
Author(s):  
Vikas Radhakrishna Deulgaonkar ◽  
Varun A. Shitole ◽  
Rohan M. Panage
Keyword(s):  
Finite Element ◽  
Motor Vehicle ◽  
Bending Moment ◽  
Structural Features ◽  
Element Analysis ◽  
Shell Elements ◽  
Public Transport System ◽  
Section Modulus ◽  
Cross Member ◽  
Utility Vehicle

Passenger transport is an inseparable ingredient of public transport system for developing and developed nations. In present work design and analysis of state transport utility vehicle ~ bus is carried out. Present paper focuses on the design enhancements in structural features of sub and superstructure without any alterations on the chassis provided by OEMs. Limiting dimensions of bus as prescribed by automotive industry standard and central motor vehicle rules are the design constraints accounted in the present work. This work was commenced with the thorough study of sub and superstructure configurations, seat locations, passenger load patterns, locations of doors, windows and emergency exits and other relevant bus attributes. Hand calculations for evaluation gross section modulus of chassis and cross member combination are presented. Usage of shear force and bending moment diagrams to evaluate the stress and deflection for the proposed load patterns is made before proceeding for finite element analysis. Finite element modelling and analysis of the sub and super structure combination is carried using shell elements with the presumption that chassis of the bus is rigid. Roll-over analysis of bus for the present configuration is presented.

Character Analysis of Balance and Imbalance of Varying Rigidity of Rigid Pile Composite Foundation under Seismic Load

2014 ◽  
Vol 1065-1069 ◽  
pp. 19-22
Author(s):  
Zhen Feng Wang ◽  
Ke Sheng Ma
Keyword(s):  
Finite Element ◽  
Bending Moment ◽  
Horizontal Displacement ◽  
Element Model ◽  
Composite Foundation ◽  
Seismic Load ◽  
Seismic Loads ◽  
Element Analysis ◽  
Rigid Pile ◽  
Rigid Pile Composite Foundation

Based on ABAQUS finite element analysis software simulation, the finite element model for dynamic analysis of rigid pile composite foundation and superstructure interaction system is established, which selects the two kinds of models, by simulating the soil dynamic constitutive model, selecting appropriate artificial boundary.The influence of rigid pile composite foundation on balance and imbalance of varying rigidity is analyzed under seismic loads. The result shows that the maximum bending moment and the horizontal displacement of the long pile is much greater than that of the short pile under seismic loads, the long pile of bending moment is larger in the position of stiffness change. By constrast, under the same economic condition, the aseismic performance of of rigid pile composite foundation on balance of varying rigidity is better than that of rigid pile composite foundation on imbalance of varying rigidity.

Some new results and current challenges in the finite element analysis of shells

Acta Numerica ◽  
2001 ◽  
Vol 10 ◽  
pp. 215-250 ◽  
Author(s):  
Dominique Chapelle
Keyword(s):  
Finite Element ◽  
Shell Theory ◽  
Shell Structures ◽  
Engineering Practice ◽  
Element Analysis ◽  
Shell Elements ◽  
Shell Models ◽  
The Finite Element Analysis ◽  
Shell Finite Element ◽  
Mathematical Analyses

This article, a companion to the article by Philippe G. Ciarlet on the mathematical modelling of shells also in this issue of Acta Numerica, focuses on numerical issues raised by the analysis of shells.Finite element procedures are widely used in engineering practice to analyse the behaviour of shell structures. However, the concept of ‘shell finite element’ is still somewhat fuzzy, as it may correspond to very different ideas and techniques in various actual implementations. In particular, a significant distinction can be made between shell elements that are obtained via the discretization of shell models, and shell elements – such as the general shell elements – derived from 3D formulations using some kinematic assumptions, without the use of any shell theory. Our first objective in this paper is to give a unified perspective of these two families of shell elements. This is expected to be very useful as it paves the way for further thorough mathematical analyses of shell elements. A particularly important motivation for this is the understanding and treatment of the deficiencies associated with the analysis of thin shells (among which is the locking phenomenon). We then survey these deficiencies, in the framework of the asymptotic behaviour of shell models. We conclude the article by giving some detailed guidelines to numerically assess the performance of shell finite elements when faced with these pathological phenomena, which is essential for the design of improved procedures.

Finite Element Analysis of Automobile Drive Axle Housing Based on ANSYS

2015 ◽  
Vol 741 ◽  
pp. 223-226
Author(s):  
Hai Bin Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dynamic Performance ◽  
Element Analysis ◽  
Shell Elements ◽  
Fea Model ◽  
Automobile Design ◽  
Housing Structure ◽  
Drive Axle ◽  
Drive Axle Housing

The performance of automobile drive axle housing structure affects whether the automobile design is successful or not. In this paper, the author built the FEA model of a automobile drive axle housing with shell elements by ANSYS. In order to building the optimization model of the automobile drive axle housing, the author studied the static and dynamic performance of it’s structure based on the model.

J-Integral Analysis of Surface Cracks in Round Bars under Bending Moments

2011 ◽  
Vol 52-54 ◽  
pp. 43-48 ◽  
Author(s):  
Al Emran Ismail ◽  
Ahmad Kamal Ariffin ◽  
Shahrum Abdullah ◽  
Mariyam Jameelah Ghazali ◽  
Ruslizam Daud
Keyword(s):  
Finite Element ◽  
Crack Depth ◽  
Crack Tip ◽  
Bending Moment ◽  
Limit Load ◽  
Fe Model ◽  
Surface Cracks ◽  
Element Analysis ◽  
Reference Stress ◽  
Proposed Model

This paper presents a non-linear numerical investigation of surface cracks in round bars under bending moment by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element (FE) model was constructed and special attention was given at the crack tip of the cracks. The surface cracks were characterized by the dimensionless crack aspect ratio, a/b = 0.6, 0.8, 1.0 and 1.2, while the dimensionless relative crack depth, a/D = 0.1, 0.2 and 0.3. The square-root singularity of stresses and strains was modeled by shifting the mid-point nodes to the quarter-point locations close to the crack tip. The proposed model was validated with the existing model before any further analysis. The elastic-plastic analysis under remotely applied bending moment was assumed to follow the Ramberg-Osgood relation with n = 5 and 10. J values were determined for all positions along the crack front and then, the limit load was predicted using the J values obtained from FEA through the reference stress method.

scholarly journals A Review on Numerical Analysis of RC Flat Slabs Exposed to Fire

2020 ◽  
Vol 27 (1) ◽  
pp. 1-5
Author(s):  
Hanadi Naji ◽  
Nibras Khalid ◽  
Mutaz Medhlom
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Analysis ◽  
Bending Moment ◽  
Mechanical And Thermal Properties ◽  
Vertical Deflection ◽  
Element Analysis ◽  
Flat Slabs ◽  
Numerical Studies ◽  
The Finite Element Analysis

This paper aims at presenting and discussing the numerical studies performed to estimate the mechanical and thermal behavior of RC flat slabs at elevated temperature and fire. The numerical analysis is carried out using finite element programs by developing models to simulate the performance of the buildings subjected to fire. The mechanical and thermal properties of the materials obtained from the experimental work are involved in the modeling that the outcomes will be more realistic. Many parameters related to fire resistance of the flat slabs have been studied and the finite element analysis results reveal that the width and thickness of the slab, the temperature gradient, the fire direction, the exposure duration and the thermal restraint are important factors that influence the vertical deflection, bending moment and force membrane of the flat slabs exposed to fire. However, the validation of the models is verified by comparing their results to the available experimental date. The finite element modeling contributes in saving cost and time consumed by experiments.

Finite Element Analysis on Incremental Launching Construction for Steel Box Girder

2013 ◽  
Vol 671-674 ◽  
pp. 974-979
Author(s):  
Jie Dai ◽  
Jin Di ◽  
Feng Jiang Qin ◽  
Min Zhao ◽  
Wen Ru Lu
Keyword(s):  
Finite Element ◽  
Bending Moment ◽  
Internal Force ◽  
Element Analysis ◽  
Box Girder ◽  
Finite Element Software ◽  
Cable Stayed Bridge ◽  
Steel Box Girder ◽  
Maximum Value ◽  
Negative Bending

For steel box girder of cable-stayed bridge, which using incremental launching method, during the launching process, structural system and boundary conditions were changing, structure mechanical behaviors were complex. It was necessary to conduct a comprehensive analysis on internal force and deformation of the whole structure during the launching process. Took a cable-stayed bridge with single tower, double cable planes and steel box girder in China as an example; finite element software MIDAS Civil 2010 was used to establish a model for steel box girder, simulation analysis of the entire incremental launching process was carried out. Variation rules and envelopes of the internal force, stress, deformation and support reaction were obtained. The result showed that: the maximum value of positive bending moment after launching complete was 60% of the maximum value of positive bending moment during the launching process. The maximum value of negative bending moment after launching complete was 78% of the maximum value of negative bending moment during the launching process.

Finite Element Analysis for a CAD of a Concrete Mixer Drum

1994 ◽  
Author(s):  
Hossam S. Badawi ◽  
Sherif A. Mourad ◽  
Sayed M. Metwalli
Keyword(s):  
Finite Element ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Plain Concrete ◽  
Element Analysis ◽  
Shell Elements ◽  
Bending Stresses ◽  
Loading Effects ◽  
Concrete Mixer ◽  
Aided Design

Abstract For a Computer Aided Design of a concrete truck mixer, a six cubic meter concrete mixer drum is analyzed using the finite element method. The complex mixer drum structure is subjected to pressure loading resulting from the plain concrete inside the drum, in addition to its own weight. The effect of deceleration of the vehicle and the rotational motion of the drum on the reactions and stresses are also considered. Equivalent static loads are used to represent the dynamic loading effects. Three-dimensional shell elements are used to model the drum, and frame elements are used to represent a ring stiffener around the shell. Membrane forces and bending stresses are obtained for different loading conditions. Results are also compared with approximate analysis. The CAD procedure directly used the available drafting and the results were used effectively in the design of the concrete mixer drum.

Finite Element Analysis of Elliptical Chord

2013 ◽  
Vol 3 (4) ◽  
pp. 44-61
Author(s):  
K. S. Narayana ◽  
R. T. Naik ◽  
R. C. Mouli ◽  
L. V. V. Gopala Rao ◽  
R. T. Babu Naik
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Three Dimensional ◽  
Compressive Load ◽  
Dynamic Strength ◽  
Element Analysis ◽  
T Joints ◽  
Shell Elements ◽  
Tubular Joints ◽  
Plane Bending

The work presents the Finite element study of the effect of elliptical chords on the static and dynamic strength of tubular T-joints using ANSYS. Two different geometry configurations of the T-joints have been used, namely Type-1 and Type-2. An elastic analysis has been considered. The Static loading conditions used are: axial load, compressive load, In-plane bending (IPB) and Out-plane bending (OPB). The natural frequencies analysis (dynamic loading condition) has also been carried out. The geometry configurations of the T-joints have been used, vertical tubes are called brace and horizontal tubes are called chords. The joint consists of brace joined perpendicular to the circular chord. In this case the ends of the chord are held fixed. The material used is mild steel. Using ANSYS, finite element modeling and analysis of T-joint has been done under the aforementioned loading cases. It is one of the most powerful methods in use but in many cases it is an expensive analysis especially due to elastic–plastic and creep problems. Usually, three dimensional solid elements or shell elements or the combination of two types of elements are used for generating the tubular joints mesh. In tubular joints, usually the fluid induced vibrations cause the joint to fail under resonance. Therefore the natural frequencies analysis is also an important issue here. Generally the empirical results are required as guide or comparison tool for finite element investigation. It is an effective way to obtain confidence in the results derived. Shell elements have been used to model the assembled geometry. Finite element ANSYS results have been validated with the LUSAS FEA and experimental results, that is within the experimentation error limit of ten percentage.

Dynamic Interaction of High-Voltage Power Transformer Bushings, Turrets, and Tanks

2018 ◽  
Vol 34 (1) ◽  
pp. 397-421 ◽  
Author(s):  
Guo-Liang Ma ◽  
Qiang Xie ◽  
Andrew Whittaker
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Voltage ◽  
Power Transformer ◽  
Bending Moment ◽  
Dynamic Interaction ◽  
Electrical Performance ◽  
Element Analysis ◽  
Ground Shaking ◽  
Input Motion

High-voltage (HV) bushings are attached to a power transformer tank either directly or indirectly via turrets. Turrets are used to achieve electrical performance requirements, but their potential impact on the seismic performance of the supported bushings has not been considered. Earthquake simulator testing and finite-element analysis were used to quantify the amplification of ground shaking through tanks (220- and 500-kV) and turrets to the points of attachment of roof- and sidewall-supported bushings. Substantial amplification of motion was seen in both physical experiments and numerical simulations. Sample bracing schemes external to the transformer tank were investigated to potentially reduce the motions experienced by the bushings. Bushing tip displacements were reduced in all stiffening cases studied, but the outcomes for bending moment at the bushing-turret connection were mixed, with no change in some cases and significant reductions in others. The physical and numerical studies described in this paper make clear the importance of dynamic interaction of bushings, turrets, and the power transformer tank. The methods currently used to address the amplification of input motion from the base of a tank to the points of attachment of its bushing are inadequate. The seismic design of HV power transformer tanks and turrets should be supported by finite-element analysis of validated models to avoid dynamic interaction in the bushing-turret-tank system, to minimize seismic demand on the transformer bushings, and to minimize the risk of substation damage in earthquakes.

Sign in / Sign up

Export Citation Format

Share Document