scholarly journals A pre-relaxed FBG accelerometer using transverse forces with high sensitivity and improved resonant frequency

2020 ◽  
Vol 12 (1) ◽  
pp. 4
Author(s):  
Yuqing Li ◽  
Kuo Li ◽  
Guoyong Liu ◽  
Juan Tian ◽  
Yanchun Wang
Keyword(s):  
Optical Fiber ◽  
Resonant Frequency ◽  
Fiber Bragg Grating ◽  
Optical Fibers ◽  
High Sensitivity ◽  
Bragg Grating ◽  
Axial Forces ◽  
Fiber Technology ◽  
Cross Axis ◽  
Applied Optics

Fiber Bragg grating (FBG) accelerometers using transverse forces have higher sensitivity but lower resonant frequency than ones using axial forces. By shortening the distance between the two fixed ends of the FBG, the resonant frequency can be improved without lowing the sensitivity. Here, a compact FBG accelerometer using transverse forces with a slightly pre-relaxed FBG and 25mm distance between the two fixed ends has been demonstrated with the crest-to-trough sensitivity 1.1nm/g at 5Hz and the resonant frequency 42Hz. It reveals that making the FBG slightly pre-relaxed rather than pre-stretched also improves the tradeoff between the sensitivity and resonant frequency. Full Text: PDF References:Kawasaki, B. S. , Hill, K. O , Johnson, D. C. , & Fujii, Y. , "Narrow-band Bragg reflectors in optical fibers", Optics Letters 3, 66 (1978) [CrossRef]K. O. Hill, and G. Meltz, "Fiber Bragg grating technology fundamentals and overview", Journal of Lightwave Technology 15, 1263 (1997) [CrossRef]B. Lee, "Review of the present status of optical fiber sensors", Optical Fiber Technology, 9, 57-79 (2003) [CrossRef]Laudati, A. , Mennella, F. , Giordano, M. , D"Altrui, G. , Tassini, C. C. , & Cusano, A., "A Fiber-Optic Bragg Grating Seismic Sensor", IEEE Photonics Technology Letters, 19, 1991 (2007) [CrossRef]P. F. Costa Antunes, C. A. Marques, H. Varum, and P. S. Andre, "Biaxial Optical Accelerometer and High-Angle Inclinometer With Temperature and Cross-Axis Insensitivity", IEEE Sens. J. 12, 2399 (2012) [CrossRef]Guo, Y. , Zhang, D. , Zhou, Z. , Xiong, L. , & Deng, X., "Welding-packaged accelerometer based on metal-coated FBG", Chinese Optics Letters, 11, 21 (2013). [CrossRef]Zhang, Y. , Zhang, W. , Zhang, Y. , Chen, L. , Yan, T. , & Wang, S. , et al., "2-D Medium–High Frequency Fiber Bragg Gratings Accelerometer", IEEE Sensors Journal, 17, 614(2017) [CrossRef]Xiu-bin Zhu, "A novel FBG velocimeter with wind speed and temperature synchronous measurement", Optoelectronics Letters, 14, 276-279 (2018) [CrossRef]Li, K. , Yau, M. H. , Chan, T. H. T. , Thambiratnam, D., "Fiber Bragg grating strain modulation based on nonlinear string transverse-force amplifier", & Tam, H. Y. , Optics Letters, 38, 311 (2013) [CrossRef]Li, K. , Chan, T. H. T. , Yau, M. H. , Nguyen, T. , Thambiratnam, D. P. , & Tam, H. Y., "Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity", Applied Optics, 52, 6401 (2013) [CrossRef]Li, K. , Chan, T. H. T. , Yau, M. H. , Thambiratnam, D. P. , & Tam, H. Y., "Biaxial Fiber Bragg Grating Accelerometer Using Axial and Transverse Forces", IEEE Photonics Technology Letters, 26, 1549 (2014). [CrossRef]Li, K. , Chan, T. H. , Yau, M. H. , Thambiratnam, D. P. , & Tam, H. Y., "Experimental verification of the modified spring-mass theory of fiber Bragg grating accelerometers using transverse forces", Applied Optics, 53, 1200-1211(2014) [CrossRef]

Development of an Optical Fiber Sensor with a D-shaped Fiber Bragg Grating Integrated in a Loop-mirror Optical Fiber Laser as a High Sensitivity Refractometer

2021 ◽  
Vol 32 ◽  
Author(s):  
Binh Pham Thanh ◽  
Thuy Van Nguyen ◽  
Van Hoi Pham ◽  
Huy Bui ◽  
Thi Hong Cam Hoang ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Fiber Laser ◽  
Fiber Bragg Grating ◽  
Limit Of Detection ◽  
Optical Fiber Sensor ◽  
High Sensitivity ◽  
Optical Signal ◽  
Bragg Grating ◽  
Loop Mirror

In this paper, we report a new type of refractometer based on a D-shaped fiber Bragg grating (FBG) integrated in a loop-mirror optical fiber laser. This proposed sensor is used in wavelength interrogation method, in which the D-shaped FBG is applied as a refractive index (RI) sensing probe and a mirror to select mode of laser. The D-shaped FBG is prepared by the removal of a portion of the fiber cladding covering the FBG by means of side-polishing technique. The D-shaped FBG sensing probe integrated in a loop-mirror optical fiber laser with saturated pump technique, the characteristics of sensing signals have been improved to obtain stable intensity, narrower bandwidth and higher optical signal-to-noise ratio compare to normal reflection configuration. The limit of detection (LOD) of this sensor can be achieved to 2.95 x 10-4 RIU in the refractive index (RI) range of 1.42-1.44. Accordingly, we believe that the proposed refractometer has a huge potential for applications in biochemical-sensing technique.

scholarly journals Ultra-Small Fiber Bragg Grating Accelerometer

2019 ◽  
Vol 9 (13) ◽  
pp. 2707
Author(s):  
Kuo Li ◽  
Guoyong Liu ◽  
Yuqing Li ◽  
Jun Yang ◽  
Wenlong Ma
Keyword(s):  
Experimental Data ◽  
Optical Fiber ◽  
Resonant Frequency ◽  
Fiber Bragg Grating ◽  
Theoretical Calculations ◽  
Bragg Grating ◽  
Small Fiber ◽  
Supplementary Material ◽  
Inertial Object

Reducing the size of an accelerometer overcomes the tradeoff between its sensitivity and resonant frequency, and the theoretical relationships are analyzed. A fiber Bragg grating (FBG) accelerometer with the shortest vibration arm, 7 mm, among FBG accelerometers using the optical fiber to hold its inertial object is demonstrated here. The inertial object was 4.41 g. The experimental crest-to-trough sensitivity and resonant frequency, 244 pm/g and 90 Hz, disagree with the theoretical values, 633 pm/g and 67 Hz, perhaps due to the friction between the inertial object and shell. In order to find the theoretical values, a method to find the pre-stretch of the FBG is also presented here, based on the stretch of the FBG at equilibrium and the mass of the inertial object. The FFT program, experimental data and theoretical calculations are presented in detail in the Supplementary Material.

scholarly journals Sensitivity-Tunable Oscillator-Accelerometer Based on Optical Fiber Bragg Grating

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 223
Author(s):  
Xiangpeng Xiao ◽  
Jinpeng Tao ◽  
Qingguo Song ◽  
Yuezhen Sun ◽  
Jiang Yang ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Theoretical Analysis ◽  
Optical Fiber ◽  
Resonant Frequency ◽  
Resonance Frequency ◽  
Fiber Bragg Grating ◽  
Vibration Isolation ◽  
Bragg Grating ◽  
P Parameter ◽  
Tunable Oscillator

We demonstrate a fiber Bragg grating (FBG)-based oscillator-accelerometer in which the acceleration sensitivity can be tuned by controlling the location of the mass oscillator. We theoretically and experimentally investigated the performance of the proposed accelerometer. Theoretical analysis showed that both the mass and location of the oscillator affect the sensitivity and resonant frequency of the accelerometer. To simplify the analysis, a nondimensional parameter, P, was introduced to tune the sensitivity of the FBG-based oscillator-accelerometer, which is related to the location of the mass oscillator. Numerical analysis showed that the accelerometer sensitivity is linearly proportional to the P parameter. In the experiment, six FBG-based oscillator-accelerometers with different P parameters (0.125, 0.25, 0.375, 0.5, 0.625, 0.75) were fabricated and tested. The experimental results agree very well with the numerical analysis, in which the sensitivity of the proposed accelerometer linearly increased with the increase in parameter P (7.6 pm/g, 15.8 pm/g, 19.3 pm/g, 25.4 pm/g, 30.6 pm/g, 35.7 pm/g). The resonance frequency is quadratically proportional to parameter P, and the resonance frequency reaches the minimum of 440 Hz when P is equal to 0.5. The proposed oscillator-accelerometer showed very good orthogonal vibration isolation.

High Sensitivity Polymer Optical Fiber-Bragg-Grating-Based Accelerometer

2012 ◽  
Vol 24 (9) ◽  
pp. 763-765 ◽  
Author(s):  
Alessio Stefani ◽  
Søren Andresen ◽  
Wu Yuan ◽  
Nicolai Herholdt-Rasmussen ◽  
Ole Bang
Keyword(s):  
Optical Fiber ◽  
Fiber Bragg Grating ◽  
High Sensitivity ◽  
Bragg Grating ◽  
Polymer Optical Fiber ◽  
Optical Fiber Bragg Grating

High Sensitivity Polarimetric Optical Fiber Pressure Sensor Based on Tapered Polarization-Maintaining and Fiber Bragg Grating

2019 ◽  
Vol 19 (3) ◽  
pp. 1403-1409 ◽  
Author(s):  
Sungwook Choi ◽  
Seul-Lee Lee ◽  
Jihoon Kim ◽  
Sun Jae Jeong ◽  
Min Seok Kim ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Fiber Bragg Grating ◽  
Pressure Sensor ◽  
High Sensitivity ◽  
Bragg Grating ◽  
Polarization Maintaining

scholarly journals Application of Multiscale Fiber Optical Sensing Network Based on Brillouin and Fiber Bragg Grating Sensing Techniques on Concrete Structures

2012 ◽  
Vol 8 (10) ◽  
pp. 310797 ◽  
Author(s):  
Xuefeng Zhao ◽  
Jie Lu ◽  
Ruicong Han ◽  
Xianglong Kong ◽  
Yanhong Wang ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Fiber Bragg Grating ◽  
High Sensitivity ◽  
Bragg Grating ◽  
Accurate Information ◽  
Long Distance ◽  
Fiber Sensing ◽  
Sensing Technology ◽  
Optical Fiber Sensing ◽  
Distributed Optical Fiber

The paper reports the application of the distributed optical fiber sensing technology and the FBG sensing technology in bridge strain monitoring; the overall changeable characteristics of the whole structure can be obtained through the distributed optical fiber sensing technology (BOTDA), meanwhile the accurate information of local important parts of the structure can be obtained through the optical fiber Bragg grating sensor (FBG), which can improve the accuracy of the monitoring. FBG sensor has a high sensitivity, but it can only realize the measurement of local discrete points for the quasidistributed sensing. BOTDA can realize the long distance and distributed measurement, but its spatial resolution is not high. FBG and BOTDA were applied together in bridge monitoring in this test, taking full advantage of the distributed BOTDA on the overall strain measurements of the structure, as well as monitoring the key parts by the arrangement of FBG. The combined application of BOTDA and FBG can achieve the overall monitoring from point to line and then to the surface and, therefore, obtain more comprehensive information on the strain of the test structure.

scholarly journals Nano- and Micropatterning on Optical Fibers by Bottom-Up Approach: The Importance of Being Ordered

2021 ◽  
Vol 11 (7) ◽  
pp. 3254
Author(s):  
Marco Pisco ◽  
Francesco Galeotti
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Self Assembly ◽  
Ordered Structures ◽  
Bottom Up ◽  
Photonic Structures ◽  
Fiber Technology ◽  
Optical Fiber Probes ◽  
Fiber Probes ◽  
Self Assembled

The realization of advanced optical fiber probes demands the integration of materials and structures on optical fibers with micro- and nanoscale definition. Although researchers often choose complex nanofabrication tools to implement their designs, the migration from proof-of-principle devices to mass production lab-on-fiber devices requires the development of sustainable and reliable technology for cost-effective production. To make it possible, continuous efforts are devoted to applying bottom-up nanofabrication based on self-assembly to decorate the optical fiber with highly ordered photonic structures. The main challenges still pertain to “order” attainment and the limited number of implementable geometries. In this review, we try to shed light on the importance of self-assembled ordered patterns for lab-on-fiber technology. After a brief presentation of the light manipulation possibilities concerned with ordered structures, and of the new prospects offered by aperiodically ordered structures, we briefly recall how the bottom-up approach can be applied to create ordered patterns on the optical fiber. Then, we present un-attempted methodologies, which can enlarge the set of achievable structures, and can potentially improve the yielding rate in finely ordered self-assembled optical fiber probes by eliminating undesired defects and increasing the order by post-processing treatments. Finally, we discuss the available tools to quantify the degree of order in the obtained photonic structures, by suggesting the use of key performance figures of merit in order to systematically evaluate to what extent the pattern is really “ordered”. We hope such a collection of articles and discussion herein could inspire new directions and hint at best practices to fully exploit the benefits inherent to self-organization phenomena leading to ordered systems.

Sign in / Sign up

Export Citation Format

Share Document