scholarly journals Integrated co-cultured bacterial strains capabilities to aqueous sulfide and chemical oxygen demand mitigation from high-strength petroleum refinery wastewater

2019 ◽  
Vol 36 (1) ◽  
pp. 54
Author(s):  
M Mani ◽  
M.A. Abd Aziz
Keyword(s):  
Chemical Oxygen Demand ◽  
Petroleum Refinery ◽  
Oxygen Demand ◽  
High Strength ◽  
Refinery Wastewater ◽  
Bacterial Strains ◽  
Petroleum Refinery Wastewater

Catalytic thermolysis treatment of petroleum refinery wastewater collected from effluent treatment plant

2020 ◽  
Vol 18 (5-6) ◽  
Author(s):  
Bineeta Singh ◽  
Ashok K. Verma ◽  
Pradeep Kumar
Keyword(s):  
Petroleum Refinery ◽  
Thermo Gravimetric Analysis ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Effluent Treatment ◽  
Gravimetric Analysis ◽  
Refinery Wastewater ◽  
Compact Structure ◽  
Petroleum Refinery Wastewater ◽  
Process Effects

AbstractCatalytic thermolysis of petroleum refinery wastewater was investigated as a pretreatment process. Effects of various parameters like temperature, pH, dose of catalyst and time were investigated for chemical oxygen demand (COD), turbidity, and element reduction. CuSO4, FeSO4, FeCl3, and 1:1 ratio (v:v) mixture of CuSO4 and FeCl3 were used as a catalyst. The maximum reduction of COD and turbidity were 90 and 98% by mixture (1:1) of CuSO4 and FeCl3 at 70 °C, 7 pH, 1.0 kg/m3 dose in 90 min reaction time. The removal of an element like Cr, Mn, Ni, and Pb was analyzed by ICP-OES. The sludge precipitated after catalytic thermolysis was characterized using scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), Fourier transform infrared (FTIR) and thermo-gravimetric analysis (TGA)/derivative thermal analysis (DTA) analyses. Sludge from CuSO4 and mixture of CuSO4 and FeCl3 treatment has a compact structure with irregular granule which favors adsorption.

Treatment of petroleum refinery wastewater using a sequential anaerobic–aerobic moving-bed biofilm reactor system based on suspended ceramsite

2013 ◽  
Vol 67 (9) ◽  
pp. 1976-1983 ◽  
Author(s):  
Mang Lu ◽  
Li-Peng Gu ◽  
Wen-Hao Xu
Keyword(s):  
Petroleum Refinery ◽  
Oxygen Demand ◽  
Suspended Solid ◽  
Biofilm Reactor ◽  
High Porosity ◽  
Refinery Wastewater ◽  
Moving Bed Biofilm Reactor ◽  
Emission Standard ◽  
Moving Bed ◽  
Petroleum Refinery Wastewater

In this study, a novel suspended ceramsite was prepared, which has high strength, optimum density (close to water), and high porosity. The ceramsite was used to feed a moving-bed biofilm reactor (MBBR) system with an anaerobic–aerobic (A/O) arrangement to treat petroleum refinery wastewater for simultaneous removal of chemical oxygen demand (COD) and ammonium. The hydraulic retention time (HRT) of the anaerobic–aerobic MBBR system was varied from 72 to 18 h. The anaerobic–aerobic system had a strong tolerance to shock loading. Compared with the professional emission standard of China, the effluent concentrations of COD and NH3-N in the system could satisfy grade I at HRTs of 72 and 36 h, and grade II at HRT of 18 h. The average sludge yield of the anaerobic reactor was estimated to be 0.0575 g suspended solid/g CODremoved. This work demonstrated that the anaerobic–aerobic MBBR system using the suspended ceramsite as bio-carrier could be applied to achieving high wastewater treatment efficiency.

scholarly journals Organic Pollutants Removal from Petroleum Refinery Wastewater with Nanotitania Photocatalyst and UV Light Emission

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Javad Saien ◽  
Fatemeh Shahrezaei
Keyword(s):  
Organic Pollutants ◽  
Light Emission ◽  
Petroleum Refinery ◽  
Uv Light ◽  
Dead Zone ◽  
Oxygen Demand ◽  
Injection Technique ◽  
Refinery Wastewater ◽  
Treatment Unit ◽  
Petroleum Refinery Wastewater

A real petroleum refinery wastewater, containing a range of aliphatic and aromatic organic compounds, was treated using nanotitania particles, as the photocatalyst in UV/TiO2process. Samples were collected from the inlet point of the biological treatment unit. A conic-shape, circulating, and upward mixing reactor, without dead zone, was employed. The light source was an immersed mercury UV lamp (400 W, 200–550 nm). Optimal suspended catalyst concentration, fluid pH, and temperature were obtained at amounts of near 100 mg·L−1, 3 and 45°C, respectively. A maximum reduction in chemical oxygen demand (COD) of more than 78% was achieved after about 120 min and, hence, 72% after only 90 min. Significant pollutant degradation was also relevant under other conditions. The identification analysis of the organic pollutants, provided by means of a GC/MS, equipped with headspace injection technique, showed that different petroleum compounds were degraded with high efficiencies.

scholarly journals Removal of COD from petroleum refinery wastewater using electrocoagulation method

2021 ◽  
Vol 877 (1) ◽  
pp. 012046
Author(s):  
Amal H. Khalil ◽  
Mohammed A. Naji ◽  
Salam M. Naser
Keyword(s):  
Current Density ◽  
Petroleum Refinery ◽  
Oxygen Demand ◽  
Refinery Wastewater ◽  
Duration Of Treatment ◽  
Petroleum Refinery Wastewater ◽  
Short Processing Time ◽  
Percentage Removal ◽  
The Impact ◽  
A Current

Abstract This research assessed the removability of chemical oxygen demand (COD) from petroleum effluent using aluminum-based electrocoagulation reactor. A series of batch flow studies have been conducted to evaluate the impact of current density, electrodes separation, and duration of treatment on the removal of COD from the refinery effluent. The COD levels were determined employing the remaining concentrations using spectrophotometer namely Hach-Lang and standard cuvette test (LCC 514, LCK 314, or APC 400). The findings of the current investigation indicate the capacity of the electrocoagulation technique in a relatively short processing time to reduce the COD levels. The greatest efficiency in removing COD has been determined to be 80.0%. After 100 minutes of electrolysis, a current density of 8 mA/cm2 and electrodes separation of 20 mm achieved the highest percentage removal.

Treatment of Petroleum Refinery Wastewater Using Extended Aeration Activated Sludge

2014 ◽  
Vol 13 ◽  
pp. 1-7 ◽  
Author(s):  
Hayder Gasim ◽  
Abdur Rahman Megat Mohamed Amin Megat ◽  
Rahman Mohamed Kutty Shamsul
Keyword(s):  
Activated Sludge ◽  
Suspended Solids ◽  
Municipal Wastewater ◽  
Petroleum Refinery ◽  
Oxygen Demand ◽  
Organic Loading Rate ◽  
Refinery Wastewater ◽  
Environmental Aspect ◽  
Mixed Liquor ◽  
Petroleum Refinery Wastewater

The petroleum refinery wastewater biological treatment is widely investigated because of the potential complete mineralization and environmental aspect. In this study, petroleum refinery wastewater was treated in an extended aeration activated sludge (EAAS) reactor A, operated in parallel with EAAS reactor B as a control, fed with municipal wastewater. The chemical oxygen demand (COD) organic loading rate (OLR) of the refinery wastewater in reactor B was approximately 0.057 kg COD/m3·d compared to reactor A of 0.004 kg COD/m3·d throughout the study period. The flowrate for both reactors was maintained at 21.4 L/day. Food to microorganism (F/M) ratio, COD, mixed liquor suspended solids (MLSS), and mixed liquor volatile suspended solids (MLVSS) were monitored throughout the study period. The result indicated high removal efficiency of organic matter of approximately 87% as COD with 2582 mg/L of the petroleum refinery wastewater as influent and 140 mg/L as effluent.

Optimization and Control Petroleum Refinery Wastewater Treatment Systems — Status, Trends and Needs

1989 ◽  
Vol 24 (3) ◽  
pp. 463-477
Author(s):  
Stephen G. Nutt
Keyword(s):  
Wastewater Treatment ◽  
Process Control ◽  
Petroleum Refinery ◽  
Control Strategies ◽  
Refinery Wastewater ◽  
Statistical Process ◽  
Petroleum Refinery Wastewater ◽  
Optimization And Control ◽  
And Control ◽  
Wastewater Treatment Systems

Abstract Based on discussions in workshop sessions, several recurring themes became evident with respect to the optimization and control of petroleum refinery wastewater treatment systems to achieve effective removal of toxic contaminants. It was apparent that statistical process control (SPC) techniques are finding more widespread use and have been found to be effective. However, the implementation of real-time process control strategies in petroleum refinery wastewater treatment systems is in its infancy. Considerable effort will need to be expended to demonstrate the practicality of on-line sensors, and the utility of automated process control in petroleum refinery wastewater treatment systems. This paper provides a summary of the discussions held at the workshop.

Online Instrumentation of Petroleum Refinery Wastewater Treatment Plants

1989 ◽  
Vol 24 (3) ◽  
pp. 435-450 ◽  
Author(s):  
J.P. Stephenson
Keyword(s):  
Wastewater Treatment ◽  
Continuous Monitoring ◽  
Wastewater Treatment Plants ◽  
Petroleum Refinery ◽  
Petroleum Industry ◽  
Refinery Wastewater ◽  
Analytical Instruments ◽  
Petroleum Refinery Wastewater ◽  
Sample Characterization ◽  
Industry Wastewater

Abstract Several online analytical instruments are commercially available to allow continuous monitoring of petroleum industry wastewater treatment plants. Satisfactory usage of these instruments requires -special attention for sample preconditioning and sample characterization prior to selection. Specific examples of the available instruments are provided. Effective maintenance of instruments is emphasized.

Sign in / Sign up

Export Citation Format

Share Document