Evaluation of diffusion and distribution coefficients

2010 ◽  
pp. 247-298
Keyword(s):  
Distribution Coefficients

Atomic absorption determination of Hg (II), Cd (II), and As (III) in natural and waste water after preliminary group preconcentration

2019 ◽  
Vol 85 (2) ◽  
pp. 12-16
Author(s):  
I. V. Saunina ◽  
E. N. Gribanov ◽  
E. R. Oskotskaya
Keyword(s):  
Waste Water ◽  
Atomic Absorption ◽  
High Sensitivity ◽  
Distribution Coefficients ◽  
Neutral Medium ◽  
Atomic Absorption Determination ◽  
Absorption Determination ◽  
Relative Standard ◽  
Preliminary Group

The sorption of Hg (II), Cd (II), and As (III) by natural aluminosilicate is studied. It is shown that the mineral absorbs those toxicants in a rather wide pH range, quantitative extraction of analytes being achieved in a neutral or close to neutral medium (pH values range within 7.0 - 8.0; 6.3 - 7.5; 7.4 - 8.5 for Hg (II), As (III), and Cd (II), respectively). The effect of the time of phase contact on the degree of extraction of elements is shown. The sorption capacity of the mineral in optimal conditions of the medium acidity (0.06 mmol/g for mercury, 0.31 mmol/g for cadmium, and 0.52 mmol/g for arsenic) is determined. The distribution coefficients attain values of aboutnX 103-nX 104. A new combined method for determination of Hg (II), Cd (II), and As (III) in natural and waste water is developed and tested. The method consists in a preliminary group sorption concentration of the analytes by aluminosilicate, desorption of the analytes from the surface of the mineral and their subsequent atomic absorption determination. The correctness of the method is verified in analysis of spiked samples. The method is easy to use and exhibits high sensitivity, reproducibility and accuracy of analyte determination. The relative standard deviation does not exceed 0.13. Economic availability and possibility of using domestic sorption materials are the important advantages of the proposed procedure which can be used in the practice of laboratories monitoring the quality and safety of environmental objects.

Quantification of excess 231Pa in late Quaternary igneous baddeleyite

2020 ◽  
Vol 105 (12) ◽  
pp. 1830-1840 ◽  
Author(s):  
Yi Sun ◽  
Axel K. Schmitt ◽  
Lucia Pappalardo ◽  
Massimo Russo
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Direct Analysis ◽  
Weight Percent ◽  
Volcanic Field ◽  
Distribution Coefficients ◽  
Secular Equilibrium ◽  
Melt Distribution ◽  
D Values ◽  
Significant Figures

Abstract Initial excess protactinium (231Pa) is a frequently suspected source of discordance in baddeleyite (ZrO2) geochronology, which limits accurate U/Pb dating, but such excesses have never been directly demonstrated. In this study, Pa incorporation in late Holocene baddeleyite from Somma-Vesuvius (Campanian Volcanic Province, central Italy) and Laacher See (East Eifel Volcanic Field, western Germany) was quantified by U-Th-Pa measurements using a large-geometry ion microprobe. Baddeleyite crystals isolated from subvolcanic syenites have average U concentrations of ~200 ppm and are largely stoichiometric with minor abundances of Nb, Hf, Ti, and Fe up to a few weight percent. Measured (231Pa)/(235U) activity ratios are significantly above the secular equilibrium value of unity and range from 3.4(8) to 14.9(2.6) in Vesuvius baddeleyite and from 3.6(9) to 8.9(1.4) in Laacher See baddeleyite (values within parentheses represent uncertainties in the last significant figures reported as 1σ throughout the text). Crystallization ages of 5.12(56) ka (Vesuvius; MSWD = 0.96, n = 12) and 15.6(2.0) ka (Laacher See; MSWD = 0.91, n = 10) were obtained from (230Th)/(238U) disequilibria for the same crystals, which are close to the respective eruption ages. Applying a corresponding age correction indicates average initial (231Pa)/(235U)0 of 8.8(1.0) (Vesuvius) and 7.9(5) (Laacher See). For reasonable melt activities, model baddeleyite-melt distribution coefficients of DPa/DU = 5.8(2) and 4.1(2) are obtained for Vesuvius and Laacher See, respectively. Speciation-dependent (Pa4+ vs. Pa5+) partitioning coefficients (D values) from crystal lattice strain models for tetra- and pentavalent proxy ions significantly exceed DPa/DU inferred from direct analysis of 231Pa for Pa5+. This is consistent with predominantly reduced Pa4+ in the melt, for which D values similar to U4+ are expected. Contrary to common assumptions, baddeleyite-crystallizing melts from Vesuvius and Laacher See appear to be dominated by Pa4+ rather than Pa5+. An initial disequilibrium correction for baddeleyite geochronology using DPa/DU = 5 ± 1 is recommended for oxidized phonolitic melt compositions.

Isomorphic Co-Crystallization of Ammonium and Rubidium Bromocarnallites

1994 ◽  
Vol 59 (8) ◽  
pp. 1815-1819 ◽  
Author(s):  
Christomir Christov ◽  
Christo Balarew ◽  
Stefka Tepavitcharova
Keyword(s):  
Distribution Coefficients ◽  
Mixed Crystals ◽  
Solubility Isotherm ◽  
Continuous Series ◽  
Liquid Phases

The solubility isotherm of the system NH4Br.MgBr2.6 H2O - RbBr.MgBr2.6 H2O - H2O has been investigated at 75 °C and formation of a continuous series of mixed crystals is established. The factors determining the values of the distribution coefficients of the components between the crystalline and liquid phases are discussed.

Equilibrium Sorptions in Heterogeneous Ion Exchange Membranes

1992 ◽  
Vol 57 (9) ◽  
pp. 1905-1914
Author(s):  
Miroslav Bleha ◽  
Věra Šumberová
Keyword(s):  
Experimental Data ◽  
Ion Exchange ◽  
Total Content ◽  
Distribution Coefficients ◽  
Exchange Capacity ◽  
Ion Exchange Membranes ◽  
Ion Exchange Capacity ◽  
Equilibrium Sorption ◽  
Inhomogeneity Factor

The equilibrium sorption of uni-univalent electrolytes (NaCl, KCl) in heterogeneous cation exchange membranes with various contents of the ion exchange component and in ion exchange membranes Ralex was investigated. Using experimental data which express the concentration dependence of equilibrium sorption, validity of the Donnan relation for the systems under investigation was tested and values of the Glueckauf inhomogeneity factor for Ralex membranes were determined. Determination of the equilibrium sorption allows the effect of the total content of internal water and of the ion-exchange capacity on the distribution coefficients of the electrolyte to be determined.

scholarly journals Simultaneous Visualization of 161Tb- and 177Lu-Labeled Somatostatin Analogues Using Dual-Isotope SPECT Imaging

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 536
Author(s):  
Francesca Borgna ◽  
Patrick Barritt ◽  
Pascal V. Grundler ◽  
Zeynep Talip ◽  
Susan Cohrs ◽  
...  
Keyword(s):  
Pharmacokinetic Profile ◽  
Somatostatin Analogues ◽  
Distribution Coefficients ◽  
Spect Imaging ◽  
Cell Uptake ◽  
Organ Distribution ◽  
Dual Isotope ◽  
Biodistribution Studies ◽  
Simultaneous Visualization

The decay of terbium-161 results in the emission of β¯-particles as well as conversion and Auger electrons, which makes terbium-161 interesting for therapeutic purposes. The aim of this study was to use dual-isotope SPECT imaging in order to demonstrate visually that terbium-161 and lutetium-177 are interchangeable without compromising the pharmacokinetic profile of the radiopharmaceutical. The 161Tb- and 177Lu-labeled somatostatin (SST) analogues DOTATOC (agonist) and DOTA-LM3 (antagonist) were tested in vitro to demonstrate equal properties regarding distribution coefficients and cell uptake into SST receptor-positive AR42J tumor cells. The radiopeptides were further investigated in AR42J tumor-bearing nude mice using the method of dual-isotope (terbium-161/lutetium-177) SPECT/CT imaging to enable the visualization of their distribution profiles in the same animal. Equal pharmacokinetic profiles were demonstrated for either of the two peptides, irrespective of whether it was labeled with terbium-161 or lutetium-177. Moreover, the visualization of the sub-organ distribution confirmed similar behavior of 161Tb- and 177Lu-labeled SST analogues. The data were verified in quantitative biodistribution studies using either type of peptide labeled with terbium-161 or lutetium-177. While the radionuclide did not have an impact on the organ distribution, this study confirmed previous data of a considerably higher tumor uptake of radiolabeled DOTA-LM3 as compared to the radiolabeled DOTATOC.

Consideration on modeling of Nb sorption onto clay minerals

2020 ◽  
Vol 108 (11) ◽  
pp. 873-877
Author(s):  
Tetsuji Yamaguchi ◽  
Saki Ohira ◽  
Ko Hemmi ◽  
Logan Barr ◽  
Asako Shimada ◽  
...  
Keyword(s):  
Distribution Coefficient ◽  
Clay Minerals ◽  
Safety Assessment ◽  
Distribution Coefficients ◽  
Surface Species ◽  
Complex Species ◽  
Intermediate Depth ◽  
Speciation Model ◽  
Surface Phases ◽  
High Distribution Coefficient

AbstractSorption distribution coefficient (Kd) of niobium-94 on minerals are an important parameter in safety assessment of intermediate-depth disposal of waste from core internals etc. The Kd of Nb on clay minerals in Ca(ClO4)2 solutions were, however, not successfully modeled in a previous study. The high distribution coefficients of Nb on illite in Ca(ClO4)2 solutions were successfully reproduced by taking Ca–Nb–OH surface species into account. Solubility of Nb was studied in Ca(ClO4)2 solutions and the results were reproduced by taking an aqueous Ca–Nb–OH complex species, CaNb(OH)6+, into account in addition to previously reported Nb(OH)6− and Nb(OH)72−. Based on this aqueous speciation model, the Ca–Nb–OH surface species responsible for the sorption of Nb on illite in Ca(ClO4)2 solutions was presumed to be X_OCaNb(OH)6. Although uncertainties exist in the speciation of aqueous Ca–Nb–OH species, the result of this study proposed a possible mechanism for high distribution coefficient of Nb on illite in Ca(ClO4)2 solutions. The mechanism includes Ca–Nb–OH complex formation in aqueous, solid and surface phases.

scholarly journals Sorption and leaching characteristics of pesticides in volcanic ash soils of Jeju Island, Korea

2020 ◽  
Vol 63 (1) ◽  
Author(s):  
Won-Pyo Park ◽  
Kong-Man Chang ◽  
Hae-Nam Hyun ◽  
Kyung-Hwan Boo ◽  
Bon-Jun Koo
Keyword(s):  
Volcanic Ash ◽  
Agricultural Soils ◽  
Distribution Coefficients ◽  
The Other ◽  
Jeju Island ◽  
European Standard ◽  
Leaching Behavior ◽  
Mobility Assessment ◽  
Leaching Characteristics ◽  
Volcanic Ash Soils

Abstract It is important to evaluate leaching behavior in agricultural soils to prevent the pollution of groundwater by pesticides. We identified the distribution coefficients (Kd) of ten pesticides with different physicochemical properties and compared their leaching characteristics using wick lysimeters from three distinct soil types on Jeju Island. The Kd values varied by pesticide and soil, but were within the range of 1.2 to 4231 L kg−1. Based on the European standard (Kd < 10 L kg−1), six pesticides (alachlor, ethoprophos, carbofuran, napropamide, tebuconazole, and etridiazole) were mobile in at least one tested soil, and their soil organic carbon affinity was ≤ 5.811. This value differed greatly from the other pesticides (16.533 and higher). The solubility of the six mobile pesticides was ≥ 32 mg L−1, which substantially differed from the other pesticides (≤ 0.71 mg L−1). Thus, we conclude that our mobility assessment, which is based on Kd values, can be used to predict the leaching of pesticides in the volcanic ash soils of Jeju Island. The use of pesticides should be strictly controlled to reduce the possibility of groundwater contamination.

scholarly journals Solvent Extraction Equilibrium in the CuSO4–H2SO4–LIX 984–ESCAID 103 Systern

1999 ◽  
Vol 23 (8) ◽  
pp. 518-519
Author(s):  
Francisco Jose Alguacil ◽  
Jaime Simpson ◽  
Patricio Navarro
Keyword(s):  
Solvent Extraction ◽  
Thermodynamic Model ◽  
Distribution Coefficients ◽  
Extraction System ◽  
Extraction Equilibrium ◽  
Solvent Extraction System ◽  
Measured Distribution

A previously determined thermodynamic model for extraction equilibrium is used as a basis to predict experimentally measured distribution coefficients for the CuSO4–H2SO4–LIX 984–Escaid 103 solvent extraction system at 25 °C and aqueous copper concentrations in the range 0.01–2.0 gL−1, the copper loading isotherm is also obtained.

Sign in / Sign up

Export Citation Format

Share Document