scholarly journals Use of Artificial Neural Networks in predicting rate of penetration and optimization weight on bit for several wells in Nam Rong - Doi Moi field, Vietnam

2021 ◽  
Vol 62 (3a) ◽  
pp. 37-47
Author(s):  
Hung Tien Nguyen ◽  
Duong Hong Vu ◽  
Vinh The Nguyen ◽  
Doan Thi Tram ◽  
Pham Van Trung ◽  
...  

Obtaining the maximum Rate of Penetration (ROP) by optimization of drilling parameters is the aim of every drilling engineer. This helps to save time, reduces cost and minimizes drilling problems. Since ROP depends on a lot of parameters, it is very difficult to predict it correctly. Therefore, it is necessary and important to investigate a solution for predicting ROP with high accuracy in order to determine the suitable drilling parameters. In this study, a new approach using Artificial Neural Network (ANN) has been proposed to predict ROP from real - time drilling data of several wells in Nam Rong - Doi Moi field with more than 900 datasets included important parameters such as weight on bit (WOB), weight of mud (MW), rotary speed (RPM), stand pipe pressure (SPP), flow rate (FR), torque (TQ). In the process of training the network, algorithms and the number of neurons in the hidden layer were varied to find the optimal model. The ANN model shows high accuracy when comparing to actual ROP, therefore it can be recommended as an effective and suitable method to predict ROP of other wells in research area. Besides, base on the proposed ANN model, authors carried out experiments and determine the optimal weight on bit value for the drilling interval from 1800 to 2300 m of wells in in Nam Rong Doi Moi field.

10.29007/4sdt ◽  
2022 ◽  
Author(s):  
Vu Khanh Phat Ong ◽  
Quang Khanh Do ◽  
Thang Nguyen ◽  
Hoang Long Vo ◽  
Ngoc Anh Thy Nguyen ◽  
...  

The rate of penetration (ROP) is an important parameter that affects the success of a drilling operation. In this paper, the research approach is based on different artificial neural network (ANN) models to predict ROP for oil and gas wells in Nam Con Son basin. The first is the process of collecting and evaluating drilling parameters as input data of the model. Next is to find the network model capable of predicting ROP most accurately. After that, the study will evaluate the number of input parameters of the network model. The ROP prediction results obtained from different ANN models are also compared with traditional models such as the Bingham model, Bourgoyne & Young model. These results have shown the competitiveness of the ANN model and its high applicability to actual drilling operations.


2020 ◽  
pp. 1051-1062
Author(s):  
Zaher JabbarAttwan AL Zirej ◽  
Hassan Abdul Hadi

The main objective of this study is to develop a rate of penetration (ROP) model for Khasib formation in Ahdab oil field and determine the drilling parameters controlling the prediction of ROP values by using artificial neural network (ANN).      An Interactive Petrophysical software was used to convert the raw dataset of transit time (LAS Readings) from parts of meter-to-meter reading with depth. The IBM SPSS statistics software version 22 was used to create an interconnection between the drilling variables and the rate of penetration, detection of outliers of input parameters, and regression modeling. While a JMP Version 11 software from SAS Institute Inc. was used for artificial neural modeling.      The proposed artificial neural network method depends on obtaining the input data from drilling mud logging data and wireline logging data. The data then analyzes it to create an interconnection between the drilling variables and the rate of penetration.      The proposed ANN model consists of an input layer, hidden layer and outputs layer, while it applies the tangent function (TanH) as a learning and training algorithm in the hidden layer. Finally, the predicted values of ROP are compared with the measured values. The proposed ANN model is more efficient than the multiple regression analysis in predicting ROP. The obtained coefficient of determination (R2) values using the ANN technique are 0.93 and 0.91 for training and validation sets, respectively. This study presents a new model for predicting ROP values in comparison with other conventional drilling measurements.


2013 ◽  
Vol 69 (4) ◽  
pp. 768-774 ◽  
Author(s):  
André L. N. Mota ◽  
Osvaldo Chiavone-Filho ◽  
Syllos S. da Silva ◽  
Edson L. Foletto ◽  
José E. F. Moraes ◽  
...  

An artificial neural network (ANN) was implemented for modeling phenol mineralization in aqueous solution using the photo-Fenton process. The experiments were conducted in a photochemical multi-lamp reactor equipped with twelve fluorescent black light lamps (40 W each) irradiating UV light. A three-layer neural network was optimized in order to model the behavior of the process. The concentrations of ferrous ions and hydrogen peroxide, and the reaction time were introduced as inputs of the network and the efficiency of phenol mineralization was expressed in terms of dissolved organic carbon (DOC) as an output. Both concentrations of Fe2+ and H2O2 were shown to be significant parameters on the phenol mineralization process. The ANN model provided the best result through the application of six neurons in the hidden layer, resulting in a high determination coefficient. The ANN model was shown to be efficient in the simulation of phenol mineralization through the photo-Fenton process using a multi-lamp reactor.


2022 ◽  
Vol 52 (4) ◽  
Author(s):  
Raissa Oliveira Rocha Alves ◽  
Otávio Chedid Tomé ◽  
Pollyanna Cardoso Pereira ◽  
Camila Nair Batista Couto Villanoeva ◽  
Vanelle Maria da Silva

ABSTRACT: This research was performed to ascertain the most suitable Artificial Neural Network (ANN) model to quantify the degree of fraud in powdered milk through the addition of powdered whey via regular standard physicochemical analyses. In this study, an evaluation was done on 103 samples with different quantities of added whey powder to whole milk powder. Using Fourier Transform Infrared Spectroscopy the fat, cryoscopy, total solids, defatted dry extract, lactose, protein and casein were analyzed. The hyperbolic tangent transformation function was used with 45 topologies, and the Holdback and K-fold validation methods were tested. In the Holdback method, 75% of the database was employed for training, while 25% was used for validation. In the K-fold method, the database was categorized into five equal sized subsets, which alternated between training and validation. Of the two methods, the K-fold method was proven to have superior efficiency. Next, analysis was done on three models of multilayer perceptron networks with feedforward architecture. In Model 1, the input layer contained all the physicochemical analyses conducted, in model 2 the casein analysis was excluded, and in model 3 the routine analyses performed for dairy products was done (fat, defatted dry extract, cryoscopy and total solids). From Model 3 an ANN was derived which could satisfactorily predict fraud calculated from using the routine and standard analyses for dairy products, containing 64 nodes in the hidden layer, with R2 of 0.9935 and RMSE of 0.5779 for training, and R2 of 0.9964 and RMSE of 0.4358 for validation.


2020 ◽  
Vol 12 (4) ◽  
pp. 1376 ◽  
Author(s):  
Ahmad Al-AbdulJabbar ◽  
Salaheldin Elkatatny ◽  
Ahmed Abdulhamid Mahmoud ◽  
Tamer Moussa ◽  
Dhafer Al-Shehri ◽  
...  

Rate of penetration (ROP) is one of the most important drilling parameters for optimizing the cost of drilling hydrocarbon wells. In this study, a new empirical correlation based on an optimized artificial neural network (ANN) model was developed to predict ROP alongside horizontal drilling of carbonate reservoirs as a function of drilling parameters, such as rotation speed, torque, and weight-on-bit, combined with conventional well logs, including gamma-ray, deep resistivity, and formation bulk density. The ANN model was trained using 3000 data points collected from Well-A and optimized using the self-adaptive differential evolution (SaDE) algorithm. The optimized ANN model predicted ROP for the training dataset with an average absolute percentage error (AAPE) of 5.12% and a correlation coefficient (R) of 0.960. A new empirical correlation for ROP was developed based on the weights and biases of the optimized ANN model. The developed correlation was tested on another dataset collected from Well-A, where it predicted ROP with AAPE and R values of 5.80% and 0.951, respectively. The developed correlation was then validated using unseen data collected from Well-B, where it predicted ROP with an AAPE of 5.29% and a high R of 0.956. The ANN-based correlation outperformed all previous correlations of ROP estimation that were developed based on linear regression, including a recent model developed by Osgouei that predicted the ROP for the validation data with a high AAPE of 14.60% and a low R of 0.629.


2008 ◽  
Vol 59 (10) ◽  
Author(s):  
Gozde Pektas ◽  
Erdal Dinc ◽  
Dumitru Baleanu

Simultaneaous spectrophotometric determination of clorsulon (CLO) and invermectin (IVE) in commercial veterinary formulation was performed by using the artificial neural network (ANN) based on the back propagation algorithm. In order to find the optimal ANN model various topogical networks were tested by using different hidden layers. A logsig input layer, a hidden layer of neurons using the logsig transfer function and an output layer of two neurons with purelin transfer function was found suitable for basic configuration for ANN model. A calibration set consisting of CLO and IVE in calibration set was prepared in the concentration range of 1-23 �g/mL and 1-14 �g/mL, repectively. This calibration set contains 36 different synthetic mixtures. A prediction set was prepared in order to evaluate the recovery of the investigated approach ANN chemometric calibration was applied to the simultaneous analysis of CLO and IVE in compounds in a commercial veterinary formulation. The experimental results indicate that the proposed method is appropriate for the routine quality control of the above mentioned active compounds.


2015 ◽  
Vol 15 (4) ◽  
pp. 266-274 ◽  
Author(s):  
Adel Ghith ◽  
Thouraya Hamdi ◽  
Faten Fayala

Abstract An artificial neural network (ANN) model was developed to predict the drape coefficient (DC). Hanging weight, Sample diameter and the bending rigidities in warp, weft and skew directions are selected as inputs of the ANN model. The ANN developed is a multilayer perceptron using a back-propagation algorithm with one hidden layer. The drape coefficient is measured by a Cusick drape meter. Bending rigidities in different directions were calculated according to the Cantilever method. The DC obtained results show a good correlation between the experimental and the estimated ANN values. The results prove a significant relationship between the ANN inputs and the drape coefficient. The algorithm developed can easily predict the drape coefficient of fabrics at different diameters.


Author(s):  
Aseel Shakir I. Hilaiwah ◽  
Hanan Abed Alwally Abed Allah ◽  
Basim Akhudir Abbas ◽  
Tole Sutikno

<span>An extensive review of the artificial neural network (ANN) is presented in this paper. Previous studies review the artificial neural network (ANN) based on the approaches (algorithms) used or based on the types of the artificial neural network (ANN). The presented paper reviews the ANN based on the goal of the ANN (methods, and layers), which become the main objective of this paper. As a famous artificial intelligent model, ANN mimics the human nervous system in handling the information transmited by different nodes (also known as neurons) in this model. These nodes are stacked in layers and work collectively to bring about solution to complex problems. Numerous structures exist for ANN and each of these structures is designed to addressa a specific task. Basically, the ANN architecture is comprised of 3 different layers wherein the first layer rpresents the input layer that consist of several input nodes that represent the input parameterfor the model. The hidden layer is te second layer and consists of a hidden layer of neurons. The neurons in this layer are directly connected to the neurons in the output layer. The third layer is the output layer which is the models’ response layer. The output layer neurons have the activation functions for the calculation of the ANN final output. The connection between the nodes in the ANN model is mediated by synaptic weights. This paper is a comprehensive study of ANN models and their layers.</span>


Author(s):  
К. Т. Чин ◽  
Т. Арумугам ◽  
С. Каруппанан ◽  
М. Овинис

Описываются разработка и применение искусственной нейронной сети (ИНС) для прогнозирования предельного давления трубопровода с точечным коррозионным дефектом, подверженного воздействию только внутреннего давления. Модель ИНС разработана на основе данных, полученных по результатам множественных полномасштабных испытаний на разрыв труб API 5L (класс от X42 до X100). Качество работы модели ИНС проверено в сравнении с данными для обучения, получен коэффициент детерминации R = 0,99. Модель дополнительно протестирована с учетом данных о предельном давлении корродированных труб API 5L X52 и X80. Установлено, что разработанная модель ИНС позволяет прогнозировать предельное давление с приемлемой погрешностью. С использованием данной модели проведена оценка влияния длины и глубины коррозионных дефектов на предельное давление. Выявлено, что глубина коррозии является более значимым фактором разрушения корродированного трубопровода. This paper describes the development and application of artificial neural network (ANN) to predict the failure pressure of single corrosion affected pipes subjected to internal pressure only. The development of the ANN model is based on the results of sets of full-scale burst test data of pipe grades ranging from API 5L X42 to X100. The ANN model was developed using MATLAB’s Neural Network Toolbox with 1 hidden layer and 30 neurons. Before further deployment, the developed ANN model was compared against the training data and it produced a coefficient of determination ( R ) of 0.99. The developed ANN model was further tested against a set of failure pressure data of API 5L X52 and X80 grade corroded pipes. Results revealed that the developed ANN model is able to predict the failure pressure with good margins of error. Furthermore, the developed ANN model was used to determine the failure trends when corrosion defect length and depth were varied. Results from this failure trend analysis revealed that corrosion defect depth is the most significant parameter when it comes to corroded pipeline failure.


2014 ◽  
Vol 20 (4) ◽  
pp. 565-569
Author(s):  
Ali Amooey ◽  
Maryam Ahangarian ◽  
Farshad Rezazadeh

The objective of this study is to predict thermal conductivity of aqueous solution with artificial neural network (ANN) model with three inputs (pressure, temperature and concentration). A feed forward artificial neural network with three neurons in its hidden layer is recommended to predict thermal conductivity and the accuracy of this method evaluated by regression analysis between the predicted and experimental value and it shows desired result.


Sign in / Sign up

Export Citation Format

Share Document