scholarly journals Power spectra of quarry blasting works measured in different depths

2020 ◽  
Vol 25 ◽  
pp. 302-309
Keyword(s):  
Power Spectra ◽  
Different Depths ◽  
Quarry Blasting

Two Distinct Types of Noisy Oscillators in Electroreceptors of Paddlefish

2004 ◽  
Vol 92 (1) ◽  
pp. 492-509 ◽  
Author(s):  
Alexander B. Neiman ◽  
David F. Russell
Keyword(s):  
Power Spectra ◽  
Sensory Receptors ◽  
Spontaneous Firing ◽  
Synaptic Coupling ◽  
External Stimulation ◽  
Different Depths ◽  
Computational Analyses ◽  
Peripheral Sensory ◽  
Spontaneous Firing Rate ◽  
Oscillatory Processes

Our computational analyses and experiments demonstrate that ampullary electroreceptors in paddlefish ( Polyodon spathula) contain 2 distinct types of continuously active noisy oscillators. The spontaneous firing of afferents reflects both rhythms, and as a result is stochastically biperiodic (quasiperiodic). The first type of oscillator resides in the sensory epithelia, is recorded as approximately 26 Hz and ±70 μV voltage fluctuations at the canal skin pores, and gives rise to a noisy peak at f e ≈ 26 Hz in power spectra of spontaneous afferent firing. The second type of oscillator resides in afferent terminals, is seen as a noisy peak at f a ≈ 30–70 Hz that dominates the power spectra of spontaneous afferent firing, and corresponds to the mean spontaneous firing rate. Sideband peaks at frequencies of f a ± f e are consistent with epithelia-to-afferent unidirectional synaptic coupling or, alternatively, nonlinear mixing of the 2 oscillatory processes. External stimulation affects the frequency of only the afferent oscillator, not the epithelial oscillators. Application of temperature gradients localized the f e and f a oscillators to different depths below the skin. Having 2 distinct types of internal oscillators is a novel form of organization for peripheral sensory receptors, of relevance for other hair cell sensory receptors.

Image formation analysis of thick biological specimens using three-dimensional power-spectra of through focus series

1994 ◽  
Vol 52 ◽  
pp. 124-125
Author(s):  
Karen F. Han
Keyword(s):  
Inelastic Scattering ◽  
Imaging Techniques ◽  
Mass Density ◽  
Relative Proportion ◽  
Three Dimensional ◽  
Power Spectra ◽  
Image Formation ◽  
Energy Filtering ◽  
Ewald Sphere ◽  
Nonlinear Imaging

The primary focus in our laboratory is the study of higher order chromatin structure using three dimensional electron microscope tomography. Three dimensional tomography involves the deconstruction of an object by combining multiple projection views of the object at different tilt angles, image intensities are not always accurate representations of the projected object mass density, due to the effects of electron-specimen interactions and microscope lens aberrations. Therefore, an understanding of the mechanism of image formation is important for interpreting the images. The image formation for thick biological specimens has been analyzed by using both energy filtering and Ewald sphere constructions. Surprisingly, there is a significant amount of coherent transfer for our thick specimens. The relative amount of coherent transfer is correlated with the relative proportion of elastically scattered electrons using electron energy loss spectoscopy and imaging techniques.Electron-specimen interactions include single and multiple, elastic and inelastic scattering. Multiple and inelastic scattering events give rise to nonlinear imaging effects which complicates the interpretation of collected images.

Log-log scale roughness spectroscopy of surfaces

1993 ◽  
Vol 51 ◽  
pp. 224-225
Author(s):  
P. Fraundorf ◽  
B. Armbruster
Keyword(s):  
Power Spectrum ◽  
Autocorrelation Function ◽  
Power Spectra ◽  
Scanning Force Microscopy ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Force Microscopy ◽  
Scanning Force ◽  
Lateral Structure ◽  
Scale Roughness

Optical interferometry, confocal light microscopy, stereopair scanning electron microscopy, scanning tunneling microscopy, and scanning force microscopy, can produce topographic images of surfaces on size scales reaching from centimeters to Angstroms. Second moment (height variance) statistics of surface topography can be very helpful in quantifying “visually suggested” differences from one surface to the next. The two most common methods for displaying this information are the Fourier power spectrum and its direct space transform, the autocorrelation function or interferogram. Unfortunately, for a surface exhibiting lateral structure over several orders of magnitude in size, both the power spectrum and the autocorrelation function will find most of the information they contain pressed into the plot’s origin. This suggests that we plot power in units of LOG(frequency)≡-LOG(period), but rather than add this logarithmic constraint as another element of abstraction to the analysis of power spectra, we further recommend a shift in paradigm.

Multiple-fracturing and viewing of the same frozen sample at different depths using a low temperature FESEM

1996 ◽  
Vol 54 ◽  
pp. 820-821
Author(s):  
M.V. Parthasarathy ◽  
C. Daugherty
Keyword(s):  
Temperature Field ◽  
Low Temperature ◽  
Field Emission ◽  
Multiple Fracture ◽  
Precise Control ◽  
Cold Stage ◽  
Different Depths ◽  
Transfer Device

The versatility of Low Temperature Field Emission SEM (LTFESEM) for viewing frozen-hydrated biological specimens, and the high resolutions that can be obtained with such instruments have been well documented. Studies done with LTFESEM have been usually limited to the viewing of small organisms, organs, cells, and organelles, or viewing such specimens after fracturing them.We use a Hitachi 4500 FESEM equipped with a recently developed BAL-TEC SCE 020 cryopreparation/transfer device for our LTFESEM studies. The SCE 020 is similar in design to the older SCU 020 except that instead of having a dedicated stage, the SCE 020 has a detachable cold stage that mounts on to the FESEM stage when needed. Since the SCE 020 has a precisely controlled lock manipulator for transferring the specimen table from the cryopreparation chamber to the cold stage in the FESEM, and also has a motor driven microtome for precise control of specimen fracture, we have explored the feasibility of using the LTFESEM for multiple-fracture studies of the same sample.

Daylight in Underground Spaces

2018 ◽  
pp. 156-161
Author(s):  
Alexei K. Solovyov
Keyword(s):  
Light Guide ◽  
Heat Losses ◽  
Internal Environment ◽  
Method Of Calculation ◽  
Natural Lighting ◽  
Different Depths ◽  
The Common ◽  
Different Diameters

Underground spaces in town centres present a big attraction for investors. However, they put special requirements to the internal environment. Those requirements can be fulfilled by means of daylighting. Examples of lighting of underground spaces are discussed. It is shown that the common systems of natural lighting are not always possible to use and cause big heat losses. Hollow light guide pipes allow avoid the shortcomings of common daylight systems. Method of calculation of daylight factors from hollow light guide pipes is shown. The results of calculation of daylight factors under the light guide pipes of different diameters in the different depths are presented.

DEVELOPMENT OF INTEGRATED MONITORING NETWORK FOR MEASURING SALINITY OF SEA WATER

2018 ◽  
pp. 18-26
Author(s):  
Sima Ajdar qizi Askerova
Keyword(s):  
Surface Waters ◽  
Sea Water ◽  
Water Environment ◽  
Monitoring Network ◽  
Monitoring Networks ◽  
The Caspian Sea ◽  
Integrated Monitoring ◽  
Ecological Control ◽  
Different Depths ◽  
Optimal Construction

Monitoring of sea water condition is one of major requirements for carrying out the reliable ecological control of water environment. Monitoring networks contain such elements as sea buoys, beacons, etc. and are designated for measuringvarious hydrophysical parameters, including salinity of sea water. Development of specialized network and a separate buoy system for measuring thesea water salinity at different depths makes it possible to determine major regularities of processes of pollution and self-recovery of the sea waters. The article describes the scientific and methodological basics for development of this specialized network and questions of its optimal construction. It is well-known that at a depth of 30-45 m of the Caspian Sea salinity decreases and then at a depth of 45-60 m salinity is fully recovered. The mentioned changes of salinity at the relatively upper layer of sea waters is of special interest for studying the effect of ocean-going processes on the climate forming in the Caspian area. In terms of informativeness of measurements of surface waters salinity, the most informative is a layer ata 30-60 m depth, where inversion and recovery of salinity take place. It is shown that in most informative subrange of measurements, i. e. at a depth of 30-60 m optimization of regime of measurements complex should be carried out in order to increase the effectiveness of held researches. It is shown that at a depth of 35-50 m choice of the optimum regime of measurements makes it possible to obtain the maximum amount of information.

The Effect of Cutoffs on the Uplift Pressure Beneath the Hydraulic Structures Floor

2018 ◽  
Vol 6 (3) ◽  
pp. 20-28
Author(s):  
Faisal Al Tabatabaie ◽  
Dhabia Sabeeh Al Waily
Keyword(s):  
Potential Energy ◽  
Hydraulic Structure ◽  
Hydraulic Structures ◽  
Outer Face ◽  
Analogue Model ◽  
Electrical Analogue ◽  
Uplift Pressure ◽  
Different Depths ◽  
The Stability ◽  
Critical Sections

The use of cutoffs underneath the hydraulic structures is considered a safe solution to ensure the stability of hydraulic structure against uplift pressure and piping phenomenon in addition to the sliding and overturning forces of the water. These cutoffs are used at critical sections underneath the floor of hydraulic structure to substitute with their depths the horizontal lengths of the creep line of the hydraulic structure base. In this paper, the experimental method- by using electrical analogue model- was carried out to plot the flow net and study the efficiency of the front and rear faces of the cutoffs for dissipating the potential energy of the percolating water underneath the floor of hydraulic structure. An electrical analogue model which was used in this study consists of twenty five models with different depths of upstream and downstream cutoffs. After plotting the flow net for all models, it is concluded that the efficiency of the inner sides are less than that of the outer sides which were investigated before in this topic of this work that both faces reduction values in the uplift pressure are considered the same, where the efficiency of the outer face of upstream cutoff is (70.35) % and for the inner face is (29.64)%, while for the downstream cutoff the efficiency for the outer face is (76.21)% and for the inner face is (23.79)% .

Sign in / Sign up

Export Citation Format

Share Document