2.4 GHz and 5.2 GHz Frequency Bands Reconfigurable Fractal Antenna for Wearable Devices using ANN

2021 ◽  
Vol 36 (3) ◽  
pp. 354-362
Author(s):  
Sivabalan Ambigapathy ◽  
Jothilakshmi Paramasivam
Keyword(s):  
Neural Network ◽  
Patch Antenna ◽  
Return Loss ◽  
Fitness Function ◽  
Wearable Devices ◽  
Dual Band ◽  
Fractal Antenna ◽  
Frequency Bands ◽  
Fractal Pattern ◽  
High Frequency Structure Simulator

Patch antenna is being used widely in wearable and implantable devices due to its lightweight characteristics. Multi-band patch antenna designs are possible by incorporating professional naturally inspired fractal pattern generating methodologies. Automated Frequency Characteristics Analyzer (AFCA), Artificial Neural Network based Fractal Pattern Generator (AFPG) and Nitinol based Pattern Selector (NPS) functional modules are proposed in this work to design a Dual band Reconfigurable Fractal Antenna for Wearable Devices (DRFA). Producing a miniature fractal patch antenna to support famed 2.4 GHz and 5.2 GHz frequency bands with lesser than 20db return loss is the objective of this work. Numerous fractal patterns are generated with the help of AFPG and their frequency responses are analyzed by Ansys HFSS (High Frequency Structure Simulator) through AFCA module. The results are provided to the AFPG part to train the neural network with proper biasing updates. The fitness function is set to the dimension restriction of 3000 square μm with less than 20 return loss at commonly used 2.4 GHz and 5.2 GHz. The feed type and length of the patches are also fine-tuned by the proposed AFPG module.

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

scholarly journals Design of Wideband Antenna Array for WiMax Application

2021 ◽  
Vol 9 (8) ◽  
pp. 958-962
Author(s):  
Rakesh N
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Flow Solver ◽  
Wideband Antenna ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Circular Patch Antenna

Abstract: The evolution of wireless communication system has led path for innovative antenna design specifically in wideband antenna for WiMax application. In this paper design and simulation of microstrip wideband circular patch antenna array operating between 2GHz to 4Ghz is presented. The circular patch antenna is designed to operate at 3GHz line feed and the ground is itched to achieve required wideband characteristics. The simulation is carried out in EM Flow solver, High Frequency Structure Simulator software. For a single patch antenna, the return loss, lesser than -10dB throughout the bandwidth. Later an antenna array is operating between 2GHz to 4GHz frequency is designed and simulated. The return loss is lesser than -12dBi throughout the band and a peak gain is 14.7dBi. Keywords: Microstrip Patch Antenna (MPA), High Frequency Structure Simulator (HFSS).

scholarly journals Simple Mail Box Design of Dual Band Microstrip Patch Antenna for Wireless LAN Communications

2018 ◽  
Vol 7 (4) ◽  
pp. 587-592
Author(s):  
K. Thana Pakkiam ◽  
K. Baskaran ◽  
J. S. Mandeep
Keyword(s):  
Patch Antenna ◽  
Relative Permittivity ◽  
Wireless Lan ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Antenna Gain ◽  
Radiation Patterns ◽  
Feed Line ◽  
Microstrip Patch

In this paper, a simple mail box design of a dual band microstrip patch antenna, is proposed, designed, fabricated and measured for wireless LAN communications. The proposed antenna is designed using the TLC 30 (TACONIC) substrate, with a relative permittivity of 4.3 and substrate height of 1.6mm. It is designed to operate at 2.44 GHz and 5. 30 GHz respectively. The proposed antenna is the size of 31mm x 34mm x1.6mm and is incited by a 50 Ω micro strip feed line. The characteristics of the antenna are designed and the performance of the modelled antenna is evaluated using CST Microwave Studio. The return loss, radiation patterns and peak antenna gain of 6.5 dBi for frequency 2.44 GHz and 6.2 dBi for 5.30 GHz is separately and successfully plotted. The fabricated prototype exhibits an agreement between the measured and simulated return loss.

scholarly journals Dual- Band Antenna for Wi-Fi and 5G Applications

2019 ◽  
Vol 9 (1S5) ◽  
pp. 130-131
Keyword(s):  
Circular Polarization ◽  
Linear Polarization ◽  
Patch Antenna ◽  
Return Loss ◽  
Axial Ratio ◽  
Band Width ◽  
Dual Band ◽  
Circular Patch ◽  
Dual Band Antenna ◽  
Circular Patch Antenna

In this communication, a circular patch antenna is reported for dual- band operation based on VIAs. Initially the patch is resonating at single band with Linear Polarization (LP), and the Circular Polarization (CP) is obtained by inserting semi circular cuts at the edges of circular patch. The second band is achieved by loading the vertical metallic VIAs along the circumference of the patch antenna. The reported antenna is working at 2.4 GHz (Wi-Fi) and 3.5 GHz (5G) bands with Return Loss Band Width (RLBW) of 4.83% and 10.37% respectively. The Axial Ratio (AR) bandwidth at 5G band is 2.38% (3.31- 3.39 GHz)

scholarly journals A Square Patch with L and Inverted L shaped slotted AMC structure for Wi-Fi Applications

2020 ◽  
Vol 9 (1) ◽  
pp. 1722-1725
Keyword(s):  
Resonant Frequency ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Band Width ◽  
Magnetic Conductor ◽  
Radiation Characteristics ◽  
Artificial Magnetic Conductor ◽  
High Frequency Structure Simulator ◽  
Phase Reflection

To improve the antenna characteristics in terms of bandwidth, gain and its radiation characteristics without providing any phase reflections, Artificial Magnetic Conductor (AMC) are used in antenna designing. This paper initially designed AMC structure for 2.4GHz frequency. The proposed AMC structure consists of three L shaped and inverted L shaped slots and provides zero degrees phase reflection at 2.4GHz resonant frequency. This proposed AMC structure is incorporated on conventional micro strip square patch antenna and results are simulated in High Frequency Structure Simulator (HFSS) software. The Proposed AMC incorporated patch antenna, return loss is improved from -16.16dB to -31.75dB, VSWR is from 1.42 to 1.05, the band width is increased from 16.5 MHz to 348.1 MHz This design resonates at a frequency of 2.4GHz and applicable to Wi-Fi applications.

Microstrip Hexagonal Fractal Antenna for Military Applications

Frequenz ◽  
2019 ◽  
Vol 73 (9-10) ◽  
pp. 321-330 ◽  
Author(s):  
Manisha Gupta ◽  
Vinita Mathur ◽  
Arun Kumar ◽  
Virendra Saxena ◽  
Deepak Bhatnagar
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Substrate Thickness ◽  
Fractal Antenna ◽  
Resonant Frequencies ◽  
Microstrip Patch ◽  
Military Applications ◽  
Microstrip Feed

Abstract Novel and miniaturized hexagonal Microstrip patch antenna design is presented in this paper. Patch is fractured using Sierpinski and Koch structures to make the antenna applicable for multiband applications. Additionally ground is defected to enhance the bandwidth and further size is reduced. Material FR-4 (εr = 4.4)has been chosen to design proposed antenna and substrate thickness as 1.59 mm. Microstrip feed technique is used as it provides better results. Gain obtained in this case is 5.57 dB, 7.49 dB and 4.02 dB with bandwidth as 606.8 MHz, 507 MHz and 2 GHz at 8.3 GHz, 12.6 GHz and 17.6 GHz resonant frequencies. The antenna is better to other designs in terms of parameters like bandwidth, directivity, polarization, gain, return loss and dimension. The antenna provides application for military appliances. A good concord is obtained in Simulated and measured results.

Design and Optimization of Rectangular Patch Antenna Based on FR4, Teflon and Ceramic Substrates

2019 ◽  
Vol 12 (4) ◽  
pp. 368-373
Author(s):  
Manickam Karthigai Pandian ◽  
Thangam Chinnadurai
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ceramic Substrates ◽  
Design And Optimization ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Low Profile ◽  
Low Profile Antennas ◽  
Communication Devices

Background: Modern communication devices are very much dependent on the operation of low profile antennas. The objective of this paper is to perform the design and simulation of a rectangular microstrip patch antenna at a resonant frequency of 9.5 GHz. Methods: Design of the antenna is given with various substrates like FR4, Teflon and Ceramic substrates at the desired frequency. For each substrate, the performance of the antenna is measured in terms of its return loss and Voltage Standing Wave Ratio (VSWR). Results: Ansoft High-Frequency Structure Simulator is used to simulate the antenna characteristics. Conclusion: Performance characteristics of the antenna with three different substrates are compared to identify the substrate that provides the accurate return loss and VSWR.

A low profile miniaturized circular microstrip patch antenna for dual-band application

Frequenz ◽  
2020 ◽  
Vol 74 (9-10) ◽  
pp. 333-349
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Resonant Frequency ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Dual Band ◽  
Copper Sheet ◽  
Frequency Bands ◽  
Dedicated Short Range Communications ◽  
Microstrip Patch ◽  
Low Profile

AbstractA low profile Circular Microstrip Patch Antenna (CMPA) with radius 5 mm has been designed to generate two resonant frequency bands that can be used for WLAN 5.2 (5.15–5.25) GHz, Wi-Fi (5.725–5.850) GHz and Dedicated Short-Range Communications (DSRC) (5.85–5.925) GHz application bands. The designed antenna has been slitted with two slits and a stub has also been attached resulting in an additional resonant band alongside the primary resonant band. Also, primary resonant frequency shifted from 7.22 GHz to 5.87 GHz yielding about 18.7% antenna miniaturization. Frequency bands generated by the designed antenna are (5.15–5.25) GHz and (5.71–6.01) GHz having peak gain 2.3 and 4.9 dB with broadside radiation pattern. A square shape FR4 substrate having dimension 32 × 32 × 3.2 mm3 and very thin copper sheet for radiating patch and ground has been used in the proposed antenna, which can fulfill the requirement of smaller antenna with dual band application. Simulation software HFSS ver.13 has been used to design and analyze the proposed antenna. Very good matching has been obtained between simulated and measured results.

scholarly journals A Study on Dual-band Microstrip Rectangular Patch Antenna for Wi-Fi

2020 ◽  
Vol 16 ◽  
pp. 01-12
Author(s):  
Rabnawaz Sarmad Uqaili ◽  
Junaid Ahmed Uqaili ◽  
Sidrish Zahra ◽  
Faraz Bashir Soomro ◽  
Ali Akbar
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Patch Size ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
802.11 Wlan

This paper presents the design of a dual-band microstrip patch antenna for Wi-Fi that operates at 2.5 GHz and 5.8 GHz. The antenna contains a rectangular patch with two rectangular slots. The first slot is incorporated in the patch while the second slot is incorporated in the ground plane. The antenna is based on a microstrip fed rectangular patch printed on the FR-4 epoxy substrate with a dielectric constant of 4.4 and a thickness of 1.6 mm with patch size 24 mm × 21 mm. The simulated result shows that the realized antenna successfully works on dual-band and subsequently achieves a bandwidth of 100 MHz and 200 MHz as well as the return loss about -29.9 dB and -15.16 dB for 2.5 GHz and 5.8 GHz respectively. A stable omnidirectional radiation pattern is observed in the operating frequency bands. The antenna meets the required specifications for 802.11 WLAN standards.

Sign in / Sign up

Export Citation Format

Share Document