scholarly journals Design of Wideband Antenna Array for WiMax Application

2021 ◽  
Vol 9 (8) ◽  
pp. 958-962
Author(s):  
Rakesh N
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Flow Solver ◽  
Wideband Antenna ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Circular Patch Antenna

Abstract: The evolution of wireless communication system has led path for innovative antenna design specifically in wideband antenna for WiMax application. In this paper design and simulation of microstrip wideband circular patch antenna array operating between 2GHz to 4Ghz is presented. The circular patch antenna is designed to operate at 3GHz line feed and the ground is itched to achieve required wideband characteristics. The simulation is carried out in EM Flow solver, High Frequency Structure Simulator software. For a single patch antenna, the return loss, lesser than -10dB throughout the bandwidth. Later an antenna array is operating between 2GHz to 4GHz frequency is designed and simulated. The return loss is lesser than -12dBi throughout the band and a peak gain is 14.7dBi. Keywords: Microstrip Patch Antenna (MPA), High Frequency Structure Simulator (HFSS).

scholarly journals Long-Range Displacement Meters Based on Chipped Circular Patch Antenna

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4884
Author(s):  
Songtao Xue ◽  
Kang Jiang ◽  
Shuai Guan ◽  
Liyu Xie ◽  
Guochun Wan ◽  
...  
Keyword(s):  
Long Range ◽  
Patch Antenna ◽  
High Frequency ◽  
Current Flow ◽  
Displacement Sensor ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Circular Patch Antenna ◽  
Ground Plate ◽  
Stress Damage

This paper presents a passive wireless long-range displacement sensor that is based on the circular patch antenna, and the detecting range of the sensor can be customized. The sensor consists of a chipped circular antenna with two opened rectangular windows, a substrate, and a ground plate with a sloping channel. No bonding between the antenna and the ground plate allows for the chipped antenna to slide along the sloping channel. The channel will drive the current flow on the plate once the chip is activated, increasing the effective electrical length and, consequently, decreasing the resonant frequency of the circular antenna. The sensing mechanism equates the measuring displacement to the relative movement of the antenna with respect to the ground that achieves the measurement of long-range displacement and, thus, the proposed sensor can avoid stress damage to the antenna due to excessive deformation. Three different range sensors were simulated in the the Ansoft high frequency structure simulator (HFSS). The results show that the resonance frequency of the antenna has a linear relationship with the varying chute depth beneath the chip. Three sensors were fabricated, and the experimental results also validated that the sensitivity of the sensor can be adjusted.

scholarly journals Design of Circular Patch Antenna with Coplanar Waveguide Feed for LTE Application

2020 ◽  
Vol 9 (4) ◽  
pp. 1620-1622
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Conducting Surface ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Circular Patch Antenna

In this paper, a circular patch antenna with Coplanar Waveguide (CPW) feed for LTE application is proposed. The proposed antenna design exhibits a decent impedance matching inside the LTE Bands 2.6 GHz. The planar monopole antenna with coplanar waveguide (CPW) feed has been considered here. It has greater advantage over microstrip compose feed lines, low scattering, low radiation spillage, the capacity to successfully control the trademark impedance, and the simplicity of mix. Rogers RT/duroid 5880 is used as substrate having a dielectric constant of 2.2 with a thickness of 1.6 mm and the conducting surface as copper. The proposed antenna obtains a narrow bandwidth in the frequency range of 2.6 GHz. It is suitable for LTE application because of its compact size and less cost to fabrication. The gain and efficiency of this antenna is good. The antenna is designed with the help of High Frequency Structure Simulator (HFSS) software.

scholarly journals Design of Concentric Circular Antenna for Multiband applications

2019 ◽  
Vol 8 (2) ◽  
pp. 4060-4064
Keyword(s):  
High Frequency ◽  
Return Loss ◽  
Radiation Characteristics ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Epoxy Material

Design of Concentric Circular Antenna for Multiband Applications should be presented in this paper. In this paper the concentric circular antenna has been designed and propound and then operates at S, C, X, Ku, K, Ka and Q bands. In order to improve the radiation characteristics the concentric slots are introduced. The designed antenna operated at a frequency from 1 to 40 GHZ for return loss -10dB. The designed antenna substrate length (L1) and width (W1) are 34 mm x 36 mm and it coated with FR4 epoxy material. The line capacitance and inductance of circular patch are increased by use of concentric circular slots. The concentric circular antenna is studied and simulated to operate at seven different frequencies at 3.43GHZ, 7.63GHZ, 10.51GHZ, 15.98GHZ, 24.58GHZ, 30.28GHZ and 35.67GHZ. The concentric circular antenna uses HFSS v.13.0 (High Frequency Structure simulator) for design and simulation purposes.

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

Receiving characteristics of an infinite circular patch antenna array

2003 ◽  
Author(s):  
M.A. Blischke ◽  
E.J. Rothwell ◽  
K.-M. Chen ◽  
J.-L. Lin
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
Circular Patch ◽  
Circular Patch Antenna

A 1×2 circular patch antenna array for next generation 802.11ac WLAN applications

2015 ◽  
Author(s):  
Kinza Shafique ◽  
Asghar A. Razzaqi ◽  
Muhammad Mustaqim ◽  
Bilal Muhammad Khan ◽  
Bilal A. Khawaja
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
Next Generation ◽  
Circular Patch ◽  
Circular Patch Antenna

scholarly journals Dual- Band Antenna for Wi-Fi and 5G Applications

2019 ◽  
Vol 9 (1S5) ◽  
pp. 130-131
Keyword(s):  
Circular Polarization ◽  
Linear Polarization ◽  
Patch Antenna ◽  
Return Loss ◽  
Axial Ratio ◽  
Band Width ◽  
Dual Band ◽  
Circular Patch ◽  
Dual Band Antenna ◽  
Circular Patch Antenna

In this communication, a circular patch antenna is reported for dual- band operation based on VIAs. Initially the patch is resonating at single band with Linear Polarization (LP), and the Circular Polarization (CP) is obtained by inserting semi circular cuts at the edges of circular patch. The second band is achieved by loading the vertical metallic VIAs along the circumference of the patch antenna. The reported antenna is working at 2.4 GHz (Wi-Fi) and 3.5 GHz (5G) bands with Return Loss Band Width (RLBW) of 4.83% and 10.37% respectively. The Axial Ratio (AR) bandwidth at 5G band is 2.38% (3.31- 3.39 GHz)

Sign in / Sign up

Export Citation Format

Share Document