Design of Dual Band Meta-Material Resonator Sensor for Material Characterization

2021 ◽  
Vol 36 (4) ◽  
pp. 473-478
Author(s):  
Sucitra Harry ◽  
Zahriladha Zakaria ◽  
Maizatul Said ◽  
Rammah Alahnomi ◽  
M. Misran
Keyword(s):  
Resonance Frequency ◽  
Material Characterization ◽  
Empirical Equation ◽  
Narrow Band ◽  
High Sensitivity ◽  
Dual Band ◽  
Network Analyzer ◽  
Q Factor ◽  
High Q ◽  
Sensing Applications

This paper describes the design and implementation of the dual band metamaterial resonator for sensing applications by employing perturbation theory in which the dielectric properties of resonator affect Q-factor and resonance frequency. The designed sensor operates at two resonance frequency 3.20 GHz and 4.18 GHz in the range of 1 GHz to 5.5 GHz for testing solid materials. The Computer Simulation Technology (CST) software is used to design and model this sensor and it was analyzed by using vector network analyzer (VNA) for testing measurement. This study uses empirical equation from the tested materials with well-known permittivity to estimate the permittivity of other materials with unknown permittivity. The proposed sensor has achieved a narrow band with high Q-factor value of 642 and 521 at the operating frequencies of 3.16 GHz and 4.18 GHz respectively. These findings are compared with findings of previous study and the proposed sensor has achieved a high sensitivity and accuracy of 80% compare to others. This is proof that this senor could be used to characterize materials and sensing applications.

High sensitivity and high Q-factor nanoslotted parallel quadrabeam photonic crystal cavity for real-time and label-free sensing

2014 ◽  
Vol 105 (6) ◽  
pp. 063118 ◽  
Author(s):  
Daquan Yang ◽  
Shota Kita ◽  
Feng Liang ◽  
Cheng Wang ◽  
Huiping Tian ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Real Time ◽  
High Sensitivity ◽  
Q Factor ◽  
Label Free ◽  
Photonic Crystal Cavity ◽  
High Q

scholarly journals Relative Humidity Sensors Based on Microfiber Knot Resonators—A Review

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5196 ◽  
Author(s):  
Young-Geun Han
Keyword(s):  
Relative Humidity ◽  
High Sensitivity ◽  
Physical Parameters ◽  
Humidity Sensors ◽  
Coating Materials ◽  
High Q ◽  
Sensing Applications ◽  
Compact Size ◽  
The Many ◽  
Humidity Sensitivity

Recent research and development progress of relative humidity sensors using microfiber knot resonators (MKRs) are reviewed by considering the physical parameters of the MKR and coating materials sensitive to improve the relative humidity sensitivity. The fabrication method of the MKR based on silica or polymer is briefly described. The many advantages of the MKR such as strong evanescent field, a high Q-factor, compact size, and high sensitivity can provide a great diversity of sensing applications. The relative humidity sensitivity of the MKR is enhanced by concerning the physical parameters of the MKR, including the waist or knot diameter, sensitive materials, and Vernier effect. Many techniques for depositing the sensitive materials on the MKR surface are discussed. The adsorption effects of water vapor molecules on variations in the resonant wavelength and the transmission output of the MKR are described regarding the materials sensitive to relative humidity. The sensing performance of the MKR-based relative humidity sensors is discussed, including sensitivity, resolution, and response time.

Dual-Band BSF with Enhanced Quality Factor

2021 ◽  
Vol 36 (1) ◽  
pp. 89-98
Author(s):  
Asmaa Farahat ◽  
Khalid Hussein
Keyword(s):  
Impedance Matching ◽  
Dielectric Substrate ◽  
Substrate Material ◽  
Dual Band ◽  
Finite Width ◽  
Q Factor ◽  
High Q ◽  
Final Design ◽  
The Difference ◽  
Good Agreement

In the present work, a U-shaped CPW resonator (CPWR) with, generally, unequal arms is proposed to produce high Q-factor bandstop filter (BSF) based on broadside-coupling between the CPWR and a CPW through-line (CPWTL), which are printed on opposite faces of a thin substrate. The unequal arms of the U-shape and the finite width of the ground strips of the CPWR are shown to produce much higher Q-factor than that of equal arms and infinitely extending side ground planes. The dimensions of the CPWTL are optimized for impedance matching while the dimensions of the CPWR are optimized to obtain the highest Q-factor. The effect of the loss tangent of the dielectric substrate material on the Q-factor is investigated. It is shown that the difference between the lengths of the unequal arms of the U-shaped resonator can be used to control the Q-factor. Thanks to the computational efficiency of the employed electromagnetic simulator, enough number of trials has been successfully performed in reasonable time to arrive at the final design of the BSF. A prototype of the proposed BSF is fabricated for experimental investigation of its performance. The experimental measurements show good agreement when compared with the corresponding simulation results.

scholarly journals A Compact Double-Folded Substrate Integrated Waveguide Re-Entrant Cavity for Highly Sensitive Humidity Sensing

Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3308 ◽  
Author(s):  
Zhihua Wei ◽  
Jie Huang ◽  
Jing Li ◽  
Junshan Li ◽  
Xuyang Liu ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
High Sensitivity ◽  
Substrate Integrated Waveguide ◽  
Humidity Sensing ◽  
Food Industries ◽  
High Q ◽  
Sensing Applications ◽  
Compact Size ◽  
Highly Sensitive ◽  
Humidity Chamber

In this study, an ultra-compact humidity sensor based on a double-folded substrate integrated waveguide (SIW) re-entrant cavity was proposed and analyzed. By folding a circular re-entrant cavity twice along its two orthogonally symmetric planes, the designed structure achieved a remarkable size reduction (up to 85.9%) in comparison with a conventional TM010-mode circular SIW cavity. The operating principle of the humidity sensor is based on the resonant method, in other words, it utilizes the resonant properties of the sensor as signatures to detect the humidity condition of the ambient environment. To this end, a mathematical model quantitatively relating the resonant frequency of the sensor and the relative humidity (RH) level was established according to the cavity perturbation theory. The sensing performance of the sensor was experimentally validated in a RH range of 30%–80% by using a humidity chamber. The measured absolute sensitivity of the sensor was calculated to be 135.6 kHz/%RH, and the corresponding normalized sensitivity was 0.00627%/%RH. It was demonstrated that our proposed sensor not only has the merits of compact size and high sensitivity, but also benefits from a high Q-factor and ease of fabrication and integration. These advantages make it an excellent candidate for humidity sensing applications in various fields such as the agricultural, pharmaceutical, and food industries.

Single nanobeam optical sensor with a high Q-factor and high sensitivity

2015 ◽  
Vol 40 (22) ◽  
pp. 5351 ◽  
Author(s):  
Sejeong Kim ◽  
Hwi-Min Kim ◽  
Yong-Hee Lee
Keyword(s):  
Optical Sensor ◽  
High Sensitivity ◽  
Q Factor ◽  
High Q

scholarly journals Development of Enhanced Range, High Q, Passive, Chipless RFID Tags for Continuous Monitoring and Sensing Applications

Electronics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 127
Author(s):  
Aiswarya S ◽  
Sreedevi K. Menon ◽  
Massimo Donelli
Keyword(s):  
Continuous Monitoring ◽  
Analytical Formula ◽  
High Sensitivity ◽  
Proof Of Concept ◽  
Rfid Tag ◽  
High Q ◽  
Dielectric Substrates ◽  
Sensing Applications ◽  
Chipless Rfid ◽  
System Prototype

A high Q planar chipless RFID tag with high sensitivity is proposed for communication applications. In particular, the tag structure is composed of a complementary spiral structure (CSS) that is able to provide high sensitivity and compactness. A semi analytical formula for the design of a single bit tag is derived, and the behaviour of the CSS is analysed for different dielectric substrates. Different tags, composed of up to a set of eight resonators, have been numerically and experimentally assessed. In particular, a system prototype composed of a reader and a set of tags are fabricated and experimentally assessed as a proof of concept. The system provided an operative range of tens of centimetres (a maximum operative range of 65 cm). The obtained results are quite promising and the agreement between simulated and measured results are found to be good.

Sign in / Sign up

Export Citation Format

Share Document