scholarly journals Design, Development and Evaluation of Instant Release Oral Thin Films of Flunarizine

2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Asfiya Fatima ◽  
Mamatha Tirunagari ◽  
Divya Theja Chilekampalli
Keyword(s):  
Thin Films ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Rapid Onset ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Onset Of Action ◽  
Weight Variation ◽  
Accelerated Stability

The main objective of the present study was to prepare and evaluate the instant release oral thin films of Flunarizine, in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The instant release oral thin films of Flunarizine were prepared by solvent casting method using film forming polymer like Hydroxypropyl Methylcellulose E-15. The film was evaluated for various physicochemical parameters that include thickness, weight variation, folding endurance, tensile strength, drug content and in vitro drug release studies. No differences were observed in in vitro dissolution of drug from the formulated film F1-F9 as the film instantly gets wet by dissolution medium. The drug release for F5 formulations was about 98.1%. The accelerated stability studies for the optimized film formulations F5 were performed that indicates that the formulated instant release oral thin films were unaffected after initial and 3 months storage under accelerated conditions.

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF MECLOFENAMATE FAST DISSOLVING TABLETS

2021 ◽  
Vol 10 (1) ◽  
pp. 59-67
Author(s):  
Mahipal Shakkarwal ◽  
Dr. Mukesh Sharma ◽  
Dr. Ram Garg ◽  
Shankar Lal Soni ◽  
Gopal Kumar Paswan ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Suitable Treatment ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last 10-15 years for the onset of action. In the present study, the effect of superdisintegrant was compared with synthetic super disintegrants and other conventional super disintegrants in the of fast dissolving tablet formulation of Meclofenamate. Meclofenamate is an antihypertensive drug and in case of hypertension immediate treatment is required so the proposed investigation is totally based to provide the suitable treatment for hypertension. In the present work 9 formulations of Fast dissolving tablets of Cilnidipine were prepared by using Synthesized Co-proceed was evaluated and compiles with the official standards, parameters and specifications. Various formulations were prepared using four different superdisintegrant namely- kyron T-304, sodium starch glycolate, cross carmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose , bulk density , tapped density , and then tablet  evaluated post-compression parameters like thickness , drug content , hardness , weight variation  , wetting time , friability , disintegration time , dissolution time, drug release study. Formulation A8 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation A8 showed 98.64% drug release at the end of 3 minutes. The best formulations were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline and standards.

scholarly journals Formulation, Evaluation and Optimization of Orodispersible Tablets of Naproxen sodium by using Superdisintegrant

2019 ◽  
Vol 9 (4-s) ◽  
pp. 462-468
Author(s):  
Mohd. Razi Ansari ◽  
Sumer Singh ◽  
M.A. Quazi ◽  
Yaasir Ahmed Ansari ◽  
Jameel Abbas
Keyword(s):  
Patient Compliance ◽  
Naproxen Sodium ◽  
Rapid Onset ◽  
Angle Of Repose ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation

Among the different type of route of administration oral route for drug administration is most common route in which Orodispersible tablet is preferred for the patient which are unconscious, week or for immediate control. The tablet gets dispersed in mouth cavity without water, present study deals with formulation of Naproxen sodium mouth dissolving tablets using super disintegrants. Naproxen sodium is analgesic and NSAID, used for the treatment of pain and inflammation caused by different condition such as osteoarthritis, rheumatoid arthritis and menstrual cramps. However gastric discomfort caused by naproxen sodium result in poor patient compliance associated with it conventional doses form but now days Naproxen sodium MDTs produces rapid onset of action and minimise gastric discomfort associated with it. Thus improves patient compliance, enhance bioavailability and reduces the dose of drug. MDTs are formulated by direct compression method using super disintegrants in different proportion. The powder blend is subjected to pre-compression evaluation parameters like bulk density, true density, and tapped density and angle of repose. Formulations are evaluated for weight variation, hardness, wetting time, water absorption time, disintegration time. And in vitro dissolution studies and all formulations complies Pharmacopoeias standards. The tablets are evaluated and result compared for all five formulation the most efficacious super disintegrants for MTDs of Naproxen sodium as suggested by the dispersion time, disintegration time and drug dissolution profiles. Keywords: - MDT, Naproxen Sodium, crosscarmellose Sodium, Sodium starch glycolate, Cross-povidone.

scholarly journals DESIGN, DEVELOPMENT AND EVALUATION OF MOUTH DISSOLVING TABLETS OF TOFACITINIB CITRATE

2022 ◽  
pp. 238-245
Author(s):  
MEGHANA RAYKAR ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Release ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Bulk Drug

Objective: This study aims to Formulate Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate with the increase in bioavailability and patient compliance. Methods: Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate were developed by full factorial design at 32levelsand prepared by direct compression method using super integrants like sodium starch glycolate, Ludiflash. The tablets were compressed into compacts on a 10 station tablet machine. The bulk drug was characterised by determining, MP, Solubility, pH and FTIR spectra. Results: The weight variation, hardness and diameter, thickness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies, and stability study, tablet thickness, weight variation and drug content post compression parameters remained consistent and reproducible. All the formulations showed, almost 100 percent of drug release within 75 min. Formulations F1, F2 and F3 were prepared with 5 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F1<F2<F3. Formulations F4, F5 and F6 were prepared with 10 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F4<F5<F6. Formulations F7, F8 and F9 were prepared with 15 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F7<F8<F9. Conclusion: It is concluded that the amount of superdisintegrants decreases disintegration time of tablets, decreases wetting time, increases the cumulative % drug release causes better absorption.

Pharmaceutical Development and Clinical Pharmacokinetic Evaluation of Gastroretentive Floating Matrix Tablets of Levofloxacin

2011 ◽  
Vol 4 (3) ◽  
pp. 1463-1470
Author(s):  
Y. Madhusudan Rao ◽  
N Doodipala ◽  
C R Palem ◽  
S Reddy
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Alkaline Media ◽  
In Vitro Dissolution ◽  
Sustained Drug Release ◽  
Compression Technique ◽  
Weight Variation ◽  
Floating Drug Delivery System

The most common approach for achieving sustained drug release is by the use of hydrophilic polymeric excipients directly compressed with active ingredients into tablets. Hydrophilic polymers swell in the presence of water to form hydrogel structures from which drugs are released by slow diffusion. The purpose of this study was to prepare a floating drug delivery system of levofloxacin, a fluoroquinolone antibiotic.  Levofloxacin is highly soluble in acidic media and precipitates in alkaline media, thereby losing its solubility. We designed a gastroretentive system of levofloxacin to enhance bioavailability by retaining them in the acidic environment of the stomach. Tablets were prepared by the direct compression technique using polymers such as hydroxypropyl- methylcellulose (HPMC K4M, HPMC K15M, and HPMC K100M). Sodium bicarbonate was utilized as a gas-generating agent. Tables were evaluated for their physical characteristics such as hardness, thickness, friability, weight variation, drug content, swelling studies, and floating properties. Tablet formulations were evaluated by in vitro dissolution studies. Formulations showed a floating lag time of 30 seconds and a floating time above 12 hours. Among these formulations F3, F7 and F11 exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. The best formulation (F3) was selected based on in vitro characteristics and further tested in healthy volunteers by radiographic studies of tablets by incorporating BaSO4. These clinical studies revealed that the tablets remained in the stomach for 240 ± 30 minutes in fasting human volunteers, indicating gastric retention of the system.

scholarly journals Double-layer Tablets of Lornoxicam: Validation of Quantification Method, In vitro Dissolution and Kinetic Modelling

2015 ◽  
Vol 14 (9) ◽  
pp. 1659-1666
Author(s):  
Ü Gönüllü ◽  
P Gürpınar ◽  
M Üner
Keyword(s):  
Drug Release ◽  
Double Layer ◽  
Oral Delivery ◽  
Kinetic Modelling ◽  
Uv Spectroscopy ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Weight Variation

Purpose: To formulate double-layer tablets of lornoxicam (LRX) prepared by direct compression method and evaluate their physical and drug release  characteristics.Methods: The outer layer of tablets, composed of microcrystalline cellulose (MCC), starch and lactose, incorporated tan initial or prompt dose of the drug (4 mg) for immediate release. Hydroxypropyl methylcellulose (HPMC), polyvinylpyrrolidone (PVP K90) and carbomer, in varying concentrations, were used to prepare the tablet cores for sustained drug delivery. Weight variation, dimensions, hardness,  tensile strength, friability and disintegration time of the tablets were evaluated. Drug release from double-layer tablets as well as kinetic models of drug release were determined after validating the method used for the quantification of the drug. The analytical method for quantification of LRX by UV spectroscopy was validated and verified for linearity, intra-day and inter-day precision, accuracy, recovery and specifity.Results: Tablet cores based on HPMC and HPMC:PVP K90 mixture displayed better compression and flow properties (good and fair to passable) than those  formulated with PVP K90 and carbomer (poor). Satisfactory results were obtained from all the tablet formulations met compendial requirements. The slowest drug release rate was obtained with tablet cores based on PVP K90 (1.21 mg%.h-1). Drug release followed Higuchi kinetic model and the tablet cores released drug by diffusion/polymer relaxation or diffusion/erosion.Conclusion: Double-layer tablet formulation of lornoxicam based on HPMC or HPMC-PVP mixture is suitable for the treatment of inflammatory and painful conditions.Keywords: Lornoxicam, Controlled release, Double-layer tablets, Non-steroidal antiinflammatory drug, Oral delivery

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals FORMULATION AND EVALUATION OF CHLOROTHALIDONE LOADED MOUTH DISSOLVING FILM-A BIOAVAILABILITY ENHANCEMENT APPROACH USING MULTILEVEL CATEGORIC DESIGN

2020 ◽  
pp. 34-41
Author(s):  
SHUBHAM BIYANI ◽  
SARANG MALGIRWAR ◽  
RAJESHWAR KSHIRSAGAR ◽  
SAGAR KOTHAWADE
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Aqueous Dispersion ◽  
Onset Of Action ◽  
Polyethylene Glycol 400 ◽  
Bioavailability Enhancement ◽  
Disintegration Time ◽  
Peg 400 ◽  
Folding Endurance

Objective: The intension of the present study includes fabrication and optimization of mouth dissolving film loaded with Chlorothalidone by solvent evaporation techniques using two components and their three levels as multilevel Categoric design. Methods: Major problem associated with the development of film loaded with BCS class II drug is to increase its solubility. Here the Chlorothalidone solubility achieved by co-solvents, such as methanol. After dissolving the drug in co-solvent, this drug solution is poured into an aqueous dispersion of Hydroxypropyl Methylcellulose E5 (HPMC E5) and Polyethylene glycol 400 (PEG 400). The two independent variables selected are factor A (concentration of HPMC E5) and factor B (concentration of PEG 400) was selected on the basis of preliminary trials. The percentage drug release (R1), Disintegration time in sec (R2) and folding endurance (R3) were selected as dependent variables. Here HPMC E5 used as a film former, PEG 400 as plasticizer, mannitol as bulking agent, Sodium starch glycolate as a disintegrating agent, tween 80 as the surfactant, tartaric acid as saliva stimulating agent, sodium saccharin as a sweetener and orange flavour etc. These fabricated films were evaluated for physicochemical properties, disintegration time and In vitro drug release study. Results: The formulation F6 has more favorable responses as per multilevel categoric design is % drug release about 98.95 %, average disintegration time about 24.33 second and folding endurance is 117. Thus formulation F6 was preferred as an optimized formulation. Conclusion: The present formulation delivers medicament accurately with good therapeutic efficiency by oral administration, this mouth dissolving films having a rapid onset of action than conventional tablet formulations.

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals Formulation and investigation of crushed puffed rice-chitosan-HPMC based polymeric blends as carrier for sustained stomach specific drug delivery of piroxicam using 3(2) Taguchi mathematical design studies

2018 ◽  
Vol 6 (11) ◽  
pp. 61-80 ◽  
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
Pharmaceutical Journal ◽  
Weight Variation ◽  
Zero Order Release ◽  
Puffed Rice

In the present experimental investigation an attempt has been made to assess the utility of Crushed Puffed Rice (CPR)-High Molecular Weight Chitosan (HMWCH)-Hydroxypropyl Methylcellulose K15M (HPMC K15M) as a polymeric carrier for the sustained stomach delivery of Piroxicam (PRX). A total of nine formulations were prepared by using 3 (2) Taguchi factorial design, physically blending drug and polymer(s) followed by encapsulation into hard gelatin capsules size 1. The prepared capsules were evaluated for various performance such as weight variation, drug contents, in vitro buoyancy and drug release in 0.1 M HCl. The effect of drug loading on in vitro performance of the formulations was also determined. Crushed puffed rice (CPR) remained buoyant for up to average time span of 06 hr as an unwetted irregular mass in 0.1 M HCl. However, when combined with HMWCH or HPMC K15M or HPMC K15M + HMWCH a low -density cylindrical raft type hydrogel was formed which remained buoyant for up to 12 hr and released up to 99% drug in a sustained manner from 8 to 12 hr following zero order release kinetics. It was also observed that drug release from drug + CPR matrices followed Fickian mechanism. Combination of CPR + HMWCH or HMWCH + HPMC K15M also follows Fickian mechanism. Obtained data from the research work suggests that CPR in combination with HMWCH or HPMC K15M or HPMC has sufficient potential to be used as a carrier for stomach specific delivery of gastric irritant drug like PRX.Soni et al., International Current Pharmaceutical Journal, April 2018, 6(11): 61-80http://www.icpjonline.com/documents/Vol6Issue11/01.pdf

scholarly journals Formulation and In Vitro Evaluation of Sustained Release Floating Matrix Tablet of Levofloxacin by Direct Compression Method

2019 ◽  
Vol 9 (4-s) ◽  
pp. 398-403
Author(s):  
Nidhi Kumari Pandey ◽  
Sailesh Kumar Ghatuary ◽  
Amit Dubey ◽  
Prabhat Kumar Jain
Keyword(s):  
Drug Release ◽  
Acute Infection ◽  
Methyl Cellulose ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Weight Variation

The objective of the present work was to develop Gastro retentive dosage forms which would remain in the stomach and upper part or GIT for a prolonged period of time thereby maximizing the drug release at desired site within the time before GRDFs left the stomach and upper part of the GIT, has provoked a great deal of increased interest in the formulation of such drug as floating drug delivery systems. Levofloxacin, (BCS class I) is a fluoroquinolone anti-bacterial agent. The rationale for the formulation of floating matrix tablet are acidic solubility of levofloxacin, residence of Halicobactor pylori mainly in sub region of stomach and the overdosing associated adverse effect due to continuous intake of drug in acute infection. A simple visible spectrophotometric method was employed for the estimation of levofloxacin at 294 nm and Beer’s law is obeyed in the concentration range of 2-10 μg /ml. Floating matrix tablet of levofloxacin was prepared by direct compression method using different polymers like hydroxyl propyl methyl cellulose (HPMC K4) and carbopol 934 as matrix formation polymers, sodium bicarbonate and citric acid was used as gas generating agents. The FTIR spectra of the levofloxacin and other excipients alone and in combination show the compatibility of the drug and excipients. Six formulations of different polymer percentages were formulated (F1-F6). Pre-compression parameters were evaluated. The influence of matrix forming agents and binary mixtures of them on levofloxacin release was investigated. The formulated tablets were characterized by hardness, friability, thickness, weight variation and in vitro drug release. The formulated tablets had acceptable physicochemical characters. The data obtained from the in-vitro dissolution studies of optimized batch F4were fitted in different models. The optimized formulation F4 showed 99.25% drug content and swelling index of 79.85 %. Drug release mechanism was found to be first order kinetics. Levofloxacin floating tablets exhibited increased gastric residence time, there by improved bioavailability and therapeutic effect of the drug.  

Sign in / Sign up

Export Citation Format

Share Document