scholarly journals FORMULATION AND EVALUATION OF CHLOROTHALIDONE LOADED MOUTH DISSOLVING FILM-A BIOAVAILABILITY ENHANCEMENT APPROACH USING MULTILEVEL CATEGORIC DESIGN

2020 ◽  
pp. 34-41
Author(s):  
SHUBHAM BIYANI ◽  
SARANG MALGIRWAR ◽  
RAJESHWAR KSHIRSAGAR ◽  
SAGAR KOTHAWADE
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Aqueous Dispersion ◽  
Onset Of Action ◽  
Polyethylene Glycol 400 ◽  
Bioavailability Enhancement ◽  
Disintegration Time ◽  
Peg 400 ◽  
Folding Endurance

Objective: The intension of the present study includes fabrication and optimization of mouth dissolving film loaded with Chlorothalidone by solvent evaporation techniques using two components and their three levels as multilevel Categoric design. Methods: Major problem associated with the development of film loaded with BCS class II drug is to increase its solubility. Here the Chlorothalidone solubility achieved by co-solvents, such as methanol. After dissolving the drug in co-solvent, this drug solution is poured into an aqueous dispersion of Hydroxypropyl Methylcellulose E5 (HPMC E5) and Polyethylene glycol 400 (PEG 400). The two independent variables selected are factor A (concentration of HPMC E5) and factor B (concentration of PEG 400) was selected on the basis of preliminary trials. The percentage drug release (R1), Disintegration time in sec (R2) and folding endurance (R3) were selected as dependent variables. Here HPMC E5 used as a film former, PEG 400 as plasticizer, mannitol as bulking agent, Sodium starch glycolate as a disintegrating agent, tween 80 as the surfactant, tartaric acid as saliva stimulating agent, sodium saccharin as a sweetener and orange flavour etc. These fabricated films were evaluated for physicochemical properties, disintegration time and In vitro drug release study. Results: The formulation F6 has more favorable responses as per multilevel categoric design is % drug release about 98.95 %, average disintegration time about 24.33 second and folding endurance is 117. Thus formulation F6 was preferred as an optimized formulation. Conclusion: The present formulation delivers medicament accurately with good therapeutic efficiency by oral administration, this mouth dissolving films having a rapid onset of action than conventional tablet formulations.

scholarly journals THE DEVELOPMENT AND CHARACTERISATION OF FAST DISSOLVING FILM OF POORLY WATERSOLUBLE DRUG LURASIDONE HYDROCHLORIDE

2021 ◽  
pp. 170-177
Author(s):  
ANAGHA PRABHU ◽  
ASMITA ARONDEKAR Arondeka ◽  
PRASHANT BHIDE ◽  
SHWETA BORKAR
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Onset Of Action ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Casting Technique ◽  
Drug Content ◽  
In Vitro Disintegration ◽  
Lurasidone Hydrochloride

Objective: The objective of the present work was to formulate and evaluate a fast-dissolving oral film of lurasidone hydrochlorideused as an atypical antipsychotic for the treatment of schizophrenia capable of providing faster onset of action. Methods: The fastdissolving films of lurasidone hydrochloride were prepared by the solvent casting technique using different compositions and combinations of hydroxypropyl methylcellulose E-3, E-5, E-15, and K4M as fast-dissolving polymer bases. A set of seven formulations were prepared and evaluated for parameters like physical characterization, thickness, weight uniformity, mechanical characteristics (folding endurance,tensile strength), surface pH, in vitro disintegration time, drug content, and an in vitro drug release. Results: The prepared films exhibited uniform and a smooth surface with uniform weight, thicknessand 89-90% mg drug content. The formulation F7 Showed excellent elasticity and disintegration within seconds. Lurasidone hydrochloride was rapidly released in vitro from all formulations. The release was found to be rapid and maximum of 41.5% in Phosphate buffer pH 6.8 and 58.6% in 0.1 N hydrochloric acid over a period of 30 min. The further optimized formulation F7Adepicted a faster and maximum release of 78% as compared to the marketed tablet 74%. Conclusion: The developed formulation is a better alternative to tablets by its ability to produce good drug release.

scholarly journals APPLICATION OF QUALITY BY DESIGN APPROACH FOR THE OPTIMIZATION OF ORODISPERSIBLE FILM FORMULATION

2018 ◽  
Vol 11 (14) ◽  
pp. 8
Author(s):  
Ashutosh Gupta ◽  
Jatin Kumar ◽  
Surajpal Verma ◽  
Harmanpreet Singh
Keyword(s):  
Drug Release ◽  
Propylene Glycol ◽  
Quality By Design ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Dissolution ◽  
Polyethylene Glycol 400 ◽  
Disintegration Time ◽  
Peg 400 ◽  
Film Forming ◽  
Formulation Variables

Objective: The present study was done to understand the effect of formulation variables on the quality of orodispersible films using quality by design (QbD) approach as mentioned in ICH Q8 (R2) guideline.Methods: A definitive screening design of experiments (DoE) was used to identify and classify the critical formulation variables affecting critical quality attributes (CQA) using 2×2 factorial design. Based on prescreening study, the critical formulation variables, i.e. concentration of film-forming polymer and plasticizers (propylene glycol and polyethylene glycol 400 [PEG 400]) were kept in the range of 1.5–2.5% w/w and 0.5–1% v/v, respectively. A total of eight laboratory-scale formulations were prepared which were provided by DoE using solvent casting method. These batches were evaluated for CQA’s, i.e. mechanical properties such as folding endurance (FD) and disintegration time (DT). Data were analyzed for elucidating interactions between two variables and for providing a predictive model for the process. Finally, the drug was incorporated into optimized batches, and these were evaluated for in vitro dissolution study in simulated saliva (pH 6.8) as well as their mechanical properties.Results: The results suggested that the concentration of film-forming polymer and plasticizer was critical to manufacture orodispersible film with desired CQA, i.e. mechanical property (FD [>150 folds]) and DT (<60 s). The percent drug release, FD, and DT of optimized Formulation I (hydroxypropyl methylcellulose [HPMC] E5 (2%) and propylene glycol [0.15 mL]) were found to be 82.13%±0.260 (in 15 min), 164±2, and 49±1.5 s, respectively, and for optimized Formulation II (HPMC E5 [2%] and PEG 400 [0.15 mL]) was found to be 64.26%±2.026 (in 15 min) and 218±6 and 55±4 s, respectively.Conclusion: From the results, it has been found that the percentage drug release of naratriptan hydrochloride containing propylene glycol as a plasticizer was greater than the formulation containing PEG 400 as plasticizer. From this, we concluded that QbD is very much useful approach to get an optimized formulation in an economic and faster way in comparison to traditional method (hit and trail methods). The futuristic application of the film will involve the management of an acute migraine.

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

scholarly journals Development and Evaluation of Fluoxetine Fast Dissolving Films: An Alternative for Noncompliance in Pediatric Patients

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 778
Author(s):  
Emőke-Margit Rédai ◽  
Paula Antonoaea ◽  
Nicoleta Todoran ◽  
Robert Alexandru Vlad ◽  
Magdalena Bîrsan ◽  
...  
Keyword(s):  
Pediatric Patients ◽  
Hydroxypropyl Methylcellulose ◽  
Pharmaceutical Formulations ◽  
Release Kinetic ◽  
Disintegration Time ◽  
Casting Technique ◽  
First Order ◽  
Orodispersible Films ◽  
Folding Endurance

The most used pharmaceutical formulations for children are syrups, suppositories, soft chewable capsules, and mini-tablets. Administrating them might create an administration discomfort. This study aimed to develop and evaluate orodispersible films (ODFs) for pediatric patients in which the fluoxetine (FX) is formulated in the polymeric matrix. Six FX fast dissolving films (10 mg FX/ODF), FX1, FX2, FX3, FX4, FX5, and FX6, were prepared by solvent casting technique. In the composition of the ODFs, the concentration of the hydroxypropyl methylcellulose and the concentration of the propylene glycol were varied. Each formulation of fluoxetine ODF was evaluated by determining the tensile strength, folding endurance, disintegration, behavior in the controlled humidity and temperature conditions, and adhesiveness. All the obtained results were compared with the results obtained for six ODFs prepared without FX. The disintegration time of the FX ODFs was of maximum 88 s for FX2. Via the in vitro releasing study of the FX from the ODFs it was noticed that FX1 and FX2 allow a better release of the drug 99.98 ± 3.81% and 97.67 ± 3.85% being released within 15 min. From the obtained results it was also confirmed that FX ODFs were found to follow first-order release kinetic.

scholarly journals DESIGN, DEVELOPMENT, AND CHARACTERIZATION OF OROMUCOSAL WAFER OF TRAMADOL HYDROCHLORIDE

2018 ◽  
Vol 11 (8) ◽  
pp. 116
Author(s):  
Rita N Wadetwar ◽  
Tejaswini Charde
Keyword(s):  
Drug Release ◽  
Biodegradable Polymer ◽  
Research Work ◽  
Water Soluble ◽  
Content Uniformity ◽  
Onset Of Action ◽  
Water Soluble Polymer ◽  
Surface Ph ◽  
Folding Endurance

Objective: The objective of the present work was the preparation of fast-dissolving film of tramadol HCl (TMH) using water-soluble polymer, to achieve faster onset of action, to improve patient compliance, ease of dosing, and bypass the first-pass metabolism. Methods: TMH oromucosal wafers were prepared using pullulan as natural, biodegradable polymer, and propylene glycol as plasticizer by solvent casting method. Formulation batches were prepared using 32 full-factorial designs. The prepared TMH oromucosal wafers were characterized for morphology, uniformity of weight, drug content, folding endurance, in vitro disintegration time (DT), % moisture content, surface pH, in vitro % drug release, ex vivo permeation studies, compatibility studies (differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction), and stability studies.Results: Optimized batch of mouth-dissolving film of TMH containing pullulan as polymer showed 98.67±0.11% drug release at 6 min. It showed better folding endurance 88 No. of folds, in vitro DT 5.11 s, surface pH 6.84±0.12 pH, thickness 0.17±0.11 mm, and percentage content uniformity 98.45±0.48%. Stability studies carried out for the best formulation FDF5 revealed that the formulation was stable.Conclusion: The results obtained in this research work clearly indicated a promising potential of fast-dissolving oral films using natural biodegradable polymer, pullulan which gave rapid drug delivery and rapid onset of action of centrally acting drug, TMH for patients suffering from pain.

scholarly journals Design, Development and Evaluation of Instant Release Oral Thin Films of Flunarizine

2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Asfiya Fatima ◽  
Mamatha Tirunagari ◽  
Divya Theja Chilekampalli
Keyword(s):  
Thin Films ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Rapid Onset ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Onset Of Action ◽  
Weight Variation ◽  
Accelerated Stability

The main objective of the present study was to prepare and evaluate the instant release oral thin films of Flunarizine, in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The instant release oral thin films of Flunarizine were prepared by solvent casting method using film forming polymer like Hydroxypropyl Methylcellulose E-15. The film was evaluated for various physicochemical parameters that include thickness, weight variation, folding endurance, tensile strength, drug content and in vitro drug release studies. No differences were observed in in vitro dissolution of drug from the formulated film F1-F9 as the film instantly gets wet by dissolution medium. The drug release for F5 formulations was about 98.1%. The accelerated stability studies for the optimized film formulations F5 were performed that indicates that the formulated instant release oral thin films were unaffected after initial and 3 months storage under accelerated conditions.

scholarly journals ENHANCEMENT OF SOLUBILITY AND OPTIMIZATION OF ORALLY DISINTEGRATING FILMS OF ACYCLOVIR

2018 ◽  
Vol 11 (9) ◽  
pp. 280 ◽  
Author(s):  
Bikash Pandey ◽  
Arshad Bashir Khan
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Antiviral Agent ◽  
Disintegration Time ◽  
Casting Technique ◽  
Accelerated Stability ◽  
Full Factorial

Objective: The objective of this work was to prepare and optimize orally disintegrating films of acyclovir (ACV), which is a known antiviral agent. To enhance the solubility of ACV, solid dispersions of ACV were made.Methods: The films were prepared using a solvent casting technique. Full factorial design was utilized for the optimization of the effect of independent variables such as the amount of hydroxypropyl methylcellulose 5 cps, sodium starch glycolate, and propylene glycol on the disintegration time. Other evaluation tests such as drug release, drug content, thickness, and folding endurance of film were also conducted.Results: Compatibility studies by Fourier transform infrared showed that there was no significant interaction between the drug and excipients used. Disintegration time was found to be 43 s for the optimized batch. The in vitro release profile of formulation response disintegrating time in phosphate buffer pH 6.8 revealed that there was a significant increment in drug release of the optimized batch in comparison to the screening batches. Further, short-term accelerated stability studies carried out for 4 weeks for the optimized formulation which proved that the formulated films were stable at the accelerated conditions of temperature and humidity (40±2°C/75±5% RH).Conclusions: It was concluded that such ACV solid dispersion films could be beneficial in enhancement of dissolution and consequently the oral bioavailability of ACV.

scholarly journals FORMULATION AND EVALUATION OF RAMIPRIL MOUTH DISSOLVING FILMS

2019 ◽  
pp. 124-129
Author(s):  
Jasvanth E ◽  
Teja D ◽  
Mounika B ◽  
Buchi N Nalluri
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Release Mechanism ◽  
Onset Of Action ◽  
In Vitro Drug Release ◽  
Drug Release Mechanism ◽  
Preparation And Evaluation ◽  
Pvp K30

Objective: The present investigation was aimed at preparation and evaluation of mouth dissolving films (MDFs) of Ramipril to enhance patient convenience, compliance and to improve bioavailability. Methods: MDFs with 0.5% w/w Ramipril were prepared by a solvent casting method using a wet film applicator. The effects of film formers, wetting/solubilizing, saliva stimulating agents and film modifiers on the physicomechanical and in vitro Ramipril release from MDFs were evaluated. Results: The MDFs prepared were transparent, smooth and showed no re-crystallization upon storage. MDFs casted with hydroxypropyl methylcellulose (HPMC) E3 as film former and polyethylene glycol (PEG-400) as plasticizer showed superior Ramipril release rates and good physicomechanical properties when compared to MDFs with E5 and E15 as film formers. HPMC E3 MDFs with polyvinyl pyrrolidone K30 (PVP K30) and sodium lauryl sulphate (SLS) gave superior drug release properties than MDFs without PVP K30 and SLS. The HPMC E3 MDFs with citric acid (CA) as saliva stimulating and xylitol as soothing agent gave significantly superior in vitro drug release than the MDFs without CA and xylitol. Release kinetics data reveals diffusion as a drug release mechanism. Conclusion: From the obtained results, it can be concluded that the administration of Ramipril as MDF may provide a quick onset of action with enhanced oral bioavailability and therapeutic efficacy.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF BROMOCRIPTINE MESYLATE AS FAST DISSOLVING ORAL FILM

2018 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Manar Adnan Tamer ◽  
Shaimaa Nazar Abd-al Hammid ◽  
Balqis Ahmed
Keyword(s):  
Drug Release ◽  
Physical Characterization ◽  
Type Ii ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content ◽  
Folding Endurance ◽  
In Vitro Disintegration

Objective: The aim of this study was to formulate and in vitro evaluate fast dissolving oral film of practically insoluble bromocriptine mesylate to enhance its solubility and to improve its oral bioavailability by avoiding first pass effect as well as to produce an immediate release action of the drug from the film for an efficient management of diabetes mellitus type II in addition to an improvement of the patient compliance to this patient-friendly dosage form.Methods: The films were prepared by the solvent casting method using hydroxypropyl methylcellulose of grades (E3, E5, E15), polyvinyl alcohol (PVA), pectin and gelatin as film-forming polymers in addition to polyethene glycol 400 (PEG400), propylene glycol (PG) and glycerin were used as a plasticizer. Poloxamer 407 was used as a surfactant, sodium saccharin as a sweetening agent, citric acid as a saliva stimulating agent, vanilla as a flavouring agent and crospovidone as a super disintegrant. The prepared films then tested for physical characterization, thickness, weight uniformity, mechanical characteristics (folding endurance, tensile strength, percent elongation and Young's modulus), surface pH, in vitro disintegration time, drug content and an in vitro drug release.Results: Films were found to be satisfactory when evaluated for physical characterization, thickness, weight uniformity, mechanical tests, in vitro disintegration time, folding endurance, drug content and an in vitro drug release. The surface pH of all the films was found to be neutral or minor change. Films in vitro drug release studies were also done using USP dissolution apparatus type II (paddle type). The in vitro drug release profile in the optimized formulation F14 was gave 86.8 % of drug released at 2 min. The optimized formulation F14 was also showed satisfactory pH (6.2±0.2), drug content (99.2±0.5%), the disintegration time of 9.2±0.1 seconds and the time needed for 80% of medication to be released (T80 %) was 1.35 minute.Conclusion: The bromocriptine mesylate fast dissolving oral film was formulated. The given film disintegrates within nine seconds which release the drug rapidly and gives an action.

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF MECLOFENAMATE FAST DISSOLVING TABLETS

2021 ◽  
Vol 10 (1) ◽  
pp. 59-67
Author(s):  
Mahipal Shakkarwal ◽  
Dr. Mukesh Sharma ◽  
Dr. Ram Garg ◽  
Shankar Lal Soni ◽  
Gopal Kumar Paswan ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Suitable Treatment ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last 10-15 years for the onset of action. In the present study, the effect of superdisintegrant was compared with synthetic super disintegrants and other conventional super disintegrants in the of fast dissolving tablet formulation of Meclofenamate. Meclofenamate is an antihypertensive drug and in case of hypertension immediate treatment is required so the proposed investigation is totally based to provide the suitable treatment for hypertension. In the present work 9 formulations of Fast dissolving tablets of Cilnidipine were prepared by using Synthesized Co-proceed was evaluated and compiles with the official standards, parameters and specifications. Various formulations were prepared using four different superdisintegrant namely- kyron T-304, sodium starch glycolate, cross carmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose , bulk density , tapped density , and then tablet  evaluated post-compression parameters like thickness , drug content , hardness , weight variation  , wetting time , friability , disintegration time , dissolution time, drug release study. Formulation A8 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation A8 showed 98.64% drug release at the end of 3 minutes. The best formulations were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline and standards.

Sign in / Sign up

Export Citation Format

Share Document