scholarly journals Formulation, Evaluation and Optimization of Orodispersible Tablets of Naproxen sodium by using Superdisintegrant

2019 ◽  
Vol 9 (4-s) ◽  
pp. 462-468
Author(s):  
Mohd. Razi Ansari ◽  
Sumer Singh ◽  
M.A. Quazi ◽  
Yaasir Ahmed Ansari ◽  
Jameel Abbas
Keyword(s):  
Patient Compliance ◽  
Naproxen Sodium ◽  
Rapid Onset ◽  
Angle Of Repose ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation

Among the different type of route of administration oral route for drug administration is most common route in which Orodispersible tablet is preferred for the patient which are unconscious, week or for immediate control. The tablet gets dispersed in mouth cavity without water, present study deals with formulation of Naproxen sodium mouth dissolving tablets using super disintegrants. Naproxen sodium is analgesic and NSAID, used for the treatment of pain and inflammation caused by different condition such as osteoarthritis, rheumatoid arthritis and menstrual cramps. However gastric discomfort caused by naproxen sodium result in poor patient compliance associated with it conventional doses form but now days Naproxen sodium MDTs produces rapid onset of action and minimise gastric discomfort associated with it. Thus improves patient compliance, enhance bioavailability and reduces the dose of drug. MDTs are formulated by direct compression method using super disintegrants in different proportion. The powder blend is subjected to pre-compression evaluation parameters like bulk density, true density, and tapped density and angle of repose. Formulations are evaluated for weight variation, hardness, wetting time, water absorption time, disintegration time. And in vitro dissolution studies and all formulations complies Pharmacopoeias standards. The tablets are evaluated and result compared for all five formulation the most efficacious super disintegrants for MTDs of Naproxen sodium as suggested by the dispersion time, disintegration time and drug dissolution profiles. Keywords: - MDT, Naproxen Sodium, crosscarmellose Sodium, Sodium starch glycolate, Cross-povidone.

scholarly journals DEVELOPMENT, FORMULATION AND EVALUATION OF MECLOFENAMATE FAST DISSOLVING TABLETS

2021 ◽  
Vol 10 (1) ◽  
pp. 59-67
Author(s):  
Mahipal Shakkarwal ◽  
Dr. Mukesh Sharma ◽  
Dr. Ram Garg ◽  
Shankar Lal Soni ◽  
Gopal Kumar Paswan ◽  
...  
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Suitable Treatment ◽  
The Stability

The demands for fast dissolving tablets have received ever increasing day by day during the last 10-15 years for the onset of action. In the present study, the effect of superdisintegrant was compared with synthetic super disintegrants and other conventional super disintegrants in the of fast dissolving tablet formulation of Meclofenamate. Meclofenamate is an antihypertensive drug and in case of hypertension immediate treatment is required so the proposed investigation is totally based to provide the suitable treatment for hypertension. In the present work 9 formulations of Fast dissolving tablets of Cilnidipine were prepared by using Synthesized Co-proceed was evaluated and compiles with the official standards, parameters and specifications. Various formulations were prepared using four different superdisintegrant namely- kyron T-304, sodium starch glycolate, cross carmelose sodium with three concentrations (2%, 4%, 6%) by direct compression method. The blend was evaluated for pre-compression parameters like Angle of repose , bulk density , tapped density , and then tablet  evaluated post-compression parameters like thickness , drug content , hardness , weight variation  , wetting time , friability , disintegration time , dissolution time, drug release study. Formulation A8 showed the lowest disintegration time and in-vitro dissolution studies recorded that formulation A8 showed 98.64% drug release at the end of 3 minutes. The best formulations were also found to be stable and optimized formulations were subjected to the stability studies as per ICH guideline and standards.

scholarly journals Design, Development and Evaluation of Instant Release Oral Thin Films of Flunarizine

2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Asfiya Fatima ◽  
Mamatha Tirunagari ◽  
Divya Theja Chilekampalli
Keyword(s):  
Thin Films ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Rapid Onset ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Onset Of Action ◽  
Weight Variation ◽  
Accelerated Stability

The main objective of the present study was to prepare and evaluate the instant release oral thin films of Flunarizine, in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The instant release oral thin films of Flunarizine were prepared by solvent casting method using film forming polymer like Hydroxypropyl Methylcellulose E-15. The film was evaluated for various physicochemical parameters that include thickness, weight variation, folding endurance, tensile strength, drug content and in vitro drug release studies. No differences were observed in in vitro dissolution of drug from the formulated film F1-F9 as the film instantly gets wet by dissolution medium. The drug release for F5 formulations was about 98.1%. The accelerated stability studies for the optimized film formulations F5 were performed that indicates that the formulated instant release oral thin films were unaffected after initial and 3 months storage under accelerated conditions.

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING ORAL FILM OF ANTI-ALLERGIC DRUG

2018 ◽  
Vol 6 (3) ◽  
pp. 5-16 ◽  
Author(s):  
ABRAHAM LINKU ◽  
JOSEPH SIJIMOL
Keyword(s):  
Ex Vivo ◽  
Methyl Cellulose ◽  
Moisture Loss ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Permeation Study ◽  
Weight Variation

The aim of present work was the development of fast dissolving oral film of Loratadine to overcome the limitations of current routes of administration, to provide immediate action and increase the patient compliance. To improve the bioavailability of the drug, fast dissolving oral film were formulated using different grades of Hydroxy Propyl Methyl Cellulose(HPMC) and various plasticizers like Polyethylene Glycol(PEG) 400, glycerol, Propylene glycol(PG) by solvent casting method. The formulated films were evaluated for film thickness, surface pH, folding endurance, weight variation, % moisture loss, exvivo permeation study, tensile strength, % elongation, drug content uniformity, in vitro dissolution studies,in vitro disintegration test and in vivo study. The optimized formulation (F9) containing HPMC E5 and glycerol showed minimum disintegration time (10.5 s), highest in vitrodissolution (92.5%) and satisfactory stability. Ex vivo permeation study of optimized formulation showed a drug release of 80.6% within 10 min. The milk induced leucocytosis inrat proved that fast dissolving oral films of Loratadine produced a faster onset of action compared to the conventional tablets. These findings suggest that fast dissolving oral film of Loratadine could be potentially useful for treatment of allergy where quick onset of action is required.

scholarly journals Development and Optimization of Quinapril Fast Dissolving Oral Films

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
P. Vamsee Kumar ◽  
Y. Shravan Kumar
Keyword(s):  
In Vitro Dissolution ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Efficient Management ◽  
Weight Variation ◽  
Drug Polymer Interaction ◽  
Oral Films ◽  
Evaluation Parameters ◽  
Polymer Interaction

In current investigation an attempt has been made to formulate and evaluate Quinapril mouth dissolving films using HPMC 50cps, E5, E15 and in combination of Pullulan by Solvent evaporation method. Sodium starch glycolate acts as a super disintegrating agent and it is shown that as the concentration of the super disintegrates increases the disintegration time decreases. The films were evaluated for weight variation, surface pH, folding endurance, drug content, dissolving time, disintegration time, and in-vitro dissolution studies. Based on the evaluation parameters F17 was to be optimized formulation. The optimized film (F17) showed the more drug release i.e 99.40 ± 5.30% within 7 min, lowest in vitro disintegration time 10 sec. FTIR studies proved no drug polymer interaction takes place. These results revealed that fast dissolving films of Quinapril could be formulated for quick onset of action which is required in the efficient management of hypertension.

FORMULATION AND EVALUATION OF MOUTH DISSOLVING TABLETS OF RANITIDINE HYDROCHLORIDE

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (09) ◽  
pp. 13-20
Author(s):  
V Arora ◽  
◽  
S Kumar ◽  
P. B Mishra ◽  
N. Vashisht
Keyword(s):  
Research Work ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Dissolution Profile ◽  
Cyclodextrin Complex ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Ranitidine Hydrochloride ◽  
Weight Variation

In present research work, taste masked Mouth Dissolving Tablets (MDTs) of Ranitidine Hydrochloride were designed with a view to enhance the patient compliance and provide a quick onset of action. Taste masking of the drug was done by formation of complex with β cyclodextrin. Tablets were prepared by direct compression, using superdisintegrants like crosscarmellose sodium and crosspovidone in different proportion and evaluated for the pre-compression parameters such as bulk density, compressibility, angle of repose etc. In view of the better taste palatability of such a bitter API, taste masking was carried out via making the cyclodextrin complex and sucralose was used as the sweetener to impart a palatable taste to the formulation. The prepared batches of tablets were evaluated for hardness, weight variation, friability, drug content, disintegration time and in vitro dissolution profile and found satisfactory. Among all, the formulation F7 containing 5% w/w proportion of both crosscarmellose sodium and crosspovidone was considered to be best formulation, which disintegrated completely in 19 seconds and released up to 98.38% of the drug.

scholarly journals Use of hydrophilic and hydrophobic polymers for the development of controlled release tizanidine matrix tablets

2014 ◽  
Vol 50 (4) ◽  
pp. 799-818 ◽  
Author(s):  
Tariq Ali ◽  
Muhammad Harris Shoaib ◽  
Rabia Ismail Yousuf ◽  
Sabahat Jabeen ◽  
Iyad Naeem Muhammad ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
In Vitro Release ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Physical Parameters ◽  
Disintegration Time ◽  
Weight Variation ◽  
Vitro Release

The aim of the present study was to develop tizanidine controlled release matrix. Formulations were designed using central composite method with the help of design expert version 7.0 software. Avicel pH 101 in the range of 14-50% was used as a filler, while HPMC K4M and K100M in the range of 25-55%, Ethylcellulose 10 ST and 10FP in the range of 15 - 45% and Kollidon SR in the range of 25-60% were used as controlled release agents in designing different formulations. Various physical parameters including powder flow for blends and weight variation, thickness, hardness, friability, disintegration time and in-vitro release were tested for tablets. Assay of tablets were also performed as specified in USP 35 NF 32. Physical parameters of both powder blend and compressed tablets such as compressibility index, angle of repose, weight variation, thickness, hardness, friability, disintegration time and assay were evaluated and found to be satisfactory for formulations K4M2, K4M3, K4M9, K100M2, K100M3, K100M9, E10FP2, E10FP9, KSR2, KSR3 & KSR9. In vitro dissolution study was conducted in 900 ml of 0.1N HCl, phosphate buffer pH 4.5 and 6.8 medium using USP Apparatus II. In vitro release profiles indicated that formulations prepared with Ethocel 10 standard were unable to control the release of drug while formulations K4M2, K100M9, E10FP2 & KSR2 having polymer content ranging from 40-55% showed a controlled drug release pattern in the above mentioned medium. Zero-order drug release kinetics was observed for formulations K4M2, K100M9, E10FP2 & KSR2. Similarity test (f2) results for K4M2, E10FP2 & KSR2 were found to be comparable with reference formulation K100M9. Response Surface plots were also prepared for evaluating the effect of independent variable on the responses. Stability study was performed as per ICH guidelines and the calculated shelf life was 24-30 months for formulation K4M2, K100M9 and E10FP2.

scholarly journals CINNARIZINE LIQUID SOLID COMPACTS: PREPARATION EVALUATION

2019 ◽  
Vol 11 (1) ◽  
pp. 150
Author(s):  
Sreenivas Patro Sisinthy ◽  
Shubbaneswarei Selladurai
Keyword(s):  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Dsc Studies ◽  
Weight Variation ◽  
Drug Concentrations ◽  
R Value

Objective: The objective of this research was to formulate cinnarizine tablets using the liquid-solid compact technique to enhance its solubility and dissolution rate.Methods: Cinnarizine liquid-solid compacts were formulated using propylene glycol as the non-volatile solvent, Neusilin US2 as the carrier material, Aerosil 200 as the coating material and croscarmellose sodium as the disintegrant. The interaction between drug and excipients were characterized by Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies. Different batches of liquid, solid compacts were prepared by using varying carrier-coating excipient ratio and different concentration of liquid medication. Flow parameters such as bulk density, tapped density, Carr’s Index, Hausner’s Ratio as well as an angle of repose were used to test the flowability of the powder blend. The liquid-solid compacts were produced by direct compression method and were evaluated for tests such as weight variation, drug content, hardness, thickness, friability, wetting time, disintegration time as well as the in vitro dissolution studies.Results: The results of the preformulation studies of liquisolid compacts showed acceptable flow properties. The results of FTIR and DSC studies showed that there is no drug-excipient interactions. The different R values and concentrations were found to have a marked effect on the dissolution profile. Formulations with higher carrier: coating ratio (R-value) and lower drug concentrations displayed a better dissolution profile. The percentage of drug release of F3 with an R-value of 20 and a drug concentration of 10% was found to be 88.11% when compared to the conventional marketed tablet which released only 44.07% at the end of 2 h.Conclusion: From this research, it is inferred that liquid-solid technique is a promising and effective approach that can be used to enhance the dissolution rate of cinnarizine.

scholarly journals Formulation and Evaluation of Mouth Dissolving Film of Prochlorperazine Maleate

2019 ◽  
Vol 9 (6) ◽  
pp. 110-115
Author(s):  
Rajat Pawar ◽  
Ravi Sharma ◽  
Gajanan Darwhekar
Keyword(s):  
Oral Bioavailability ◽  
Research Work ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Two Factors ◽  
Experimental Trials

This research work was aimed to enhance the oral bioavailability and provide faster onset of action of Prochlorperazine maleate (used for the treatment nausea and vomiting) by formulating its mouth dissolving film (MDF). Prochlorperazine belongs to BCS II and oral bioavailability of it’s about 11-15%. The MDF of Prochlorperazine  maleate was prepared by solvent casting  method using HPMC (film forming agent),Glycerol (plasticizer), Betacyclodextrin (solubilizing agent), Citric acid (saliva stimulating agent), Mannitol (sweetening agent). The formulation was optimized by two factors, three levels (32) was used for the formulation optimization of fast dissolving film of Prochlorperazine maleate and experimental trials are performed on all 9 formulation. In which the amount of HPMC, Glycerol were selected as independent variables (factor) varied at three different level: low (-1), medium (0), and high (+1) levels. The drug release and disintegration time used as dependent variables (response). and formulation was evaluated for weight variation, thickness, folding endurance, drug content, in- vitro disintegration, in vitro dissolution study and stability study. Based on results it was concluded that MDF (F3) showed enhanced bioavailability and faster onset of action. Keywords: Prochlorperazine maleate, Mouth dissolving film, bioavailability

Formulation and Evaluation of Salbutamol Sulphate Taste Masked Oral Disintegrating Tablets

2021 ◽  
Vol 14 (4) ◽  
pp. 5571-5576
Author(s):  
Y.Shravan Kumar ◽  
Karnakar M ◽  
Harika S ◽  
Mounika M
Keyword(s):  
Method Development ◽  
In Vitro Dissolution ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Salbutamol Sulphate ◽  
Drug Content ◽  
Weight Variation ◽  
Rapid Dissolution ◽  
Adrenergic Receptor Agonist

Salbutamol is a short acting, selective beta2-adrenergic receptor agonist used in the treatment of astama and COPD. The aim of this study is to formulate oral disintegrating tablets of salbutamol sulphate to achieve rapid dissolution, absorption and further improving the bioavailability of the drug. Oral disintegrating tablets of salbutamol sulphate were designed with a view to enhance the patient compliance and provide a quick onset of action. The oral disintegrating tablets were prepared by using different synthetic polymers by direct compression method. Development of the formulation in the present study was based on the concentration of superdisintegrants and the properties of the drug. Nine batches of tablets were formulated and evaluated for various parameters: drug content, weight variation, water absorption ratio, wetting time, in vitro disintegration, hardness, friability, thickness uniformity, and in vitro dissolution. A fourier-transform infrared spectroscopy (FTIR) study showed that there were no significant interactions between the drug and the excipients. The prepared tablets were good in appearance and showed acceptable results for hardness and friability. The in vitro disintegrating time of the formulated tablets was found to be 14.39-32.41 sec and the drug content of tablets in all formulations was found to be between 87.48-99.96 %, which complied within the limits established in the Indian pharmacopeia. The study concluded that taste of the drug was masked with the help of sodium saccarhin, flavor and the concentration of super disintegrating agent increases the disintegration time of tablets get decreases. The formulation (F9) had a minimum disintegration time of 14.39 sec and 99.96 % of the drug was released within 20 min.

Formulation and Evaluation of Salbutamol Sulphate Sublingual Films

2017 ◽  
Vol 10 (5) ◽  
pp. 3836-3843
Author(s):  
Y Shravan Kumar ◽  
Deepthi B ◽  
Mounika M
Keyword(s):  
In Vitro Dissolution ◽  
Casting Method ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Salbutamol Sulphate ◽  
Weight Variation ◽  
Film Forming ◽  
Adrenergic Receptor Agonist ◽  
Polymer Ratio

Salbutamol is a short-acting, selective beta-2-adrenergic receptor agonist used in treatment of asthma and COPD. In the present work, sublingual films of Salbutamol sulphate were developed with a view to enhance the patient compliance and provide quick onset of action. Salbutamol has a bioavailability of 53 - 60%. The goal of the study was to formulate sublingual films of Salbutamol sulphate to achieve a better dissolution rate and further improving the bioavailability of the drug. Sublingual films prepared by solvent casting method using film forming polymers HPMC-E5, HPMC-E15 and Maltodextrin in different ratios. The prepared batches of films were evaluated for the drug content, weight variation, film thickness, disintegration time and in vitro dissolution studies. Among all, the formulation B1 containing HPMC-E15 with a drug: polymer ratio (1:6) was found to be the best formulation which showed 98.36% of the drug release within 15 minutes and disintegration time 18 sec. This study shows the viability of developing sublingual films of salbutamol.    

Sign in / Sign up

Export Citation Format

Share Document