scholarly journals Formulation Development and Evaluation of Sustained Release Microsphere of Levetiracetam

2021 ◽  
Vol 71 (2) ◽  
Author(s):  
Dinesh V. Panpaliya ◽  
Atish Y. Sahare ◽  
Priyanka Lanje ◽  
Pooja Dhoke
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
Solvent Evaporation ◽  
In Vitro Dissolution ◽  
Compatibility Study ◽  
Solvent Evaporation Method ◽  
Formulation Development ◽  
Sustained Drug Release ◽  
Evaporation Method

The aim of the present work was to develop and evaluate of oral microsphere of Levetiracetam to reduce the frequency of dosing by achieving 12 hours sustained drug release. The microsphere formed will also mask the bitter taste of the drug and thus increase the compatibility of the drug with the patients. Levetiracetam is a second-generation anti-epileptic agent useful in the treatment of partial onset and monoclinic seizures. It has a short half life of 7 hours and its recommended dose is 500 mg twice a daily. Microspheres are suitable drug delivery system for such drug candidate. For these reasons it is must to formulate a suitable dosage form by which it will be easier to administer the dose and also to get a sustained drug release hence microsphere was prepared using solvent evaporation method. Preformulation studies were carried out to rule out any drug polymer interaction by FTIR technique. In this study formulation was done solvent evaporation method using different percentage of HPMC– K 100, HPMC- K 15 and coated with Eudragit S100. Drug, polymer and physical mixture were evaluated for in compatibility study by Fourier transforms infrared spectroscopy. All the batches of microsphere (F1 to F5) were subjected for in vitro dissolution. Microsphere was evaluated for surface morphology, micromeritics properties, entrapment efficiency and in vitro drug release. The entrapment efficiency of microsphere ranged from 71.16%-73.66%. The size of the prepared microsphere ranges between 42.8 µm to 55.64 µm which was found to increase with increase in RPM at same polymer ratio. Micromeritics studies showed good flow properties. Among the microsphere batches, F5 was observed as an optimized batch as its formulation with polymer i.e. Eudragit-S 100 and HPMC-K 100 was found to be release in sustained manner. The F-5 batch shows is 79.45% drug release at the end of 7 hrs and its stability study indicate that these microspheres were stable at selected temperature and humidity

scholarly journals FORMULATION AND EVALUATION OF FLOATING MICROSPHERES OF CIPROFLOXACIN BY SOLVENT EVAPORATION METHOD USING DIFFERENT POLYMERS

2021 ◽  
pp. 101-108
Author(s):  
KAUSLYA ARUMUGAM ◽  
PAYAL D. BORAWAKE ◽  
JITENDRA V. SHINDE
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Entrapment Efficiency ◽  
Solvent Evaporation ◽  
Angle Of Repose ◽  
Solvent Evaporation Method ◽  
Evaporation Method

Objective: The main intention of this research was to formulate and evaluate floating microspheres of ciprofloxacin using different polymers to prolong gastric residence time. Methods: The microspheres were formulated by the solvent evaporation method using different ratios of polymers like carbopol 940, ethylcellulose, and Hydroxy Propyl Methyl Cellulose K4M. Further, the floating microspheres were evaluated for micromeritic properties like bulk density, tapped density, angle of repose, etc., percentage yield, particle size, entrapment efficiency, floating capacity, in vitro drug release study, release kinetics, drug content, swelling index, and Fourier Transform Infrared Spectroscopy (FTIR) (Compatibility studies). Results: The ciprofloxacin microspheres showed the good flowing property. The particle size ranged from 258.1±2.21 µm to 278±2.86 µm and entrapment efficiency ranged from 63.17±0.43% to 89.90±1.32%. The IR spectrum revealed that there was no interaction between the drug and polymer. F7 formulation was found to be the best formulation. Drug release was found to be 90.70±0.89% i.e. in a controlled manner at the end of 10 h. Conclusion: The floating microspheres were prepared successfully and the results clearly stated that prepared ciprofloxacin microspheres may be safe and effective controlled drug delivery over an extended period which can increase bioavailability, patient compliance, and decrease dosing frequency.

scholarly journals Formulation development and characterization of eplerenone insitu oralgels

2021 ◽  
pp. 69-78
Author(s):  
M.Parthy ◽  
T.Malyadri ◽  
Ch.Saibabu
Keyword(s):  
Drug Release ◽  
Oral Dosage ◽  
Gelling Agent ◽  
In Vitro Dissolution ◽  
Compatibility Study ◽  
Gastric Retention ◽  
Formulation Development ◽  
Sustained Drug Release

Gastro retentive drug delivery systems have been widely used to prolong the retention of dosage forms in the stomach. Among the various approaches, the floating in-situ gelling formulation offers sustained drug release as well as prolonged gastric retention, along with the added advantage of the liquid oral dosage form. The present study was an attempt to formulate and evaluate floating in situ gel of Eplerenone by using various polymers like Xanthan gum, Carbopol, HPMC K100M, and Karaya gum which undergoes pH dependant sol-gel transition at gastric pH, thereby prolonging the retention of the system in the stomach. Sodium alginate a natural polymer was employed as a gelling agent where Gelation is triggered by the source of calcium ions in the form of calcium carbonate. Drug and polymers were subjected for compatibility study using FTIR studies, which revealed that there was no interaction between drugs and polymers. The evaluation was carried out for invitro parameters such as gelling nature, Total floating time, drug content, viscosity, & in vitro dissolution studies. Among all the formulations, the F12 formulation containing HPMC K100M was chosen as an optimized formulation that shows maximum drug release by the end of 12hrs and has excellent floating characteristics and gastric retention. From kinetic studies, the optimized formulation shows zero-order release with super case II transport mechanism.

scholarly journals Improvement in vitro Dissolution Rate of Quercetin Using Cocrystallization of Quercetin-Malonic Acid

2018 ◽  
Vol 18 (3) ◽  
pp. 531 ◽  
Author(s):  
Dwi Setyawan ◽  
Sukma Adhi Permata ◽  
Ahmad Zainul ◽  
Maria Lucia Ardhani Dwi Lestari
Keyword(s):  
Dissolution Rate ◽  
Malonic Acid ◽  
Fourier Transforms ◽  
Solvent Evaporation ◽  
Physical Mixture ◽  
Original Position ◽  
In Vitro Dissolution ◽  
Solvent Evaporation Method ◽  
Evaporation Method

The aim of the study was to improve the in-vitro dissolution rate of quercetin (Qu) using cocrystallization of quercetin. Cocrystals of quercetin (Co Qu) were produced with malonic acid (Ma) as coformer at ratio 1:2 using solvent evaporation method. Cocrystals quercetin-malonic acid (Co Qu-Ma) was characterized using Differential Thermal Analysis (DTA), Powder X-Ray Diffraction (PXRD), Scanning Electron Microscope (SEM), and Fourier Transforms Infrared Spectrophotometer (FTIR) and in-vitro dissolution study. A new endothermic peak at 277.9 °C was shown from the thermogram. Diffractogram of Co Qu-Ma showed a new diffraction peak at 2θ 9.81, 12.99, and 19.80°. Microphotograph showed that Qu and Ma exhibited a columnar-shaped and a pebble-shaped crystal, respectively, and FTIR wavenumber of O-H functional group of quercetin was shifted from its original position at 3411 to 3428 cm-1 in the physical mixture (pm) of Qu-Ma and 3418 cm-1 in Co Qu-Ma, respectively. The physicochemical characterizations using DTA, PXRD, SEM and FTIR indicated that Co Qu-Ma were successfully obtained through solvent evaporation method. The in-vitro dissolution rate of Co Qu-Ma was 95.30% at 60 min. Cocrystals effectively increased dissolution rate and dissolution efficiency in comparison to the pure quercetin and physical mixture of quercetin-malonic acid.

scholarly journals ENHANCEMENT OF SOLUBILITY AND DISSOLUTION OF IBUPROFEN BY SOLID DISPERSION TECHNIQUE AND FORMULATION OF SUSTAINED RELEASE TABLETS CONTAINING THE OPTIMISED BATCH OF SOLID DISPERSION

2017 ◽  
pp. 37-44
Author(s):  
ABHIK KAR ◽  
ABDUL BAQUEE AHMED
Keyword(s):  
Sustained Release ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Solvent Evaporation ◽  
Poloxamer 407 ◽  
In Vitro Dissolution ◽  
Solvent Evaporation Method ◽  
Evaporation Method ◽  
Sustained Release Tablets

Objective: The present study was aimed to enhance the solubility of poorly water soluble drug Ibuprofen using solid dispersion technique and to develop sustained release tablets containing solid dispersion granules of the optimized batch. Ibuprofen is a non-steroidal anti-inflammatory drug (NSAID) with analgesic, antipyretic, and anti-inflammatory propertiesMethods: Solid dispersions of Ibuprofen were prepared by using PEG 20000 and Poloxamer 407 in different weight ratios by fusion and solvent evaporation method. Drug-carrier physical mixtures were also prepared. Solid dispersions were characterized by saturation solubility, drug content, in vitro dissolution, FTIR and DSC analysis. Solid dispersion formulation, SDF9 (PEG 20000 and Poloxamer 407, 1:3:3) prepared by solvent evaporation method was considered as the optimized batch. Sustained release tablets containing the solid dispersion granules of the optimized batch were prepared by direct compression method using HPMC K100M at three concentrations (10%, 14%, 18% w/w). The prepared formulations were evaluated for hardness, thickness, weight variation, friability, in vitro dissolution studies and release kinetics modelling.Results: Solid dispersion formulation, SDF9showed 95.09% drug release in 60 min and considered as the optimized batch. Tablet formulation, FT3 (HPMC K100M 18% w/w) showed 96% drug release for 12 h.Conclusion: Solid dispersions of ibuprofen using a combination of PEG 20000 and poloxamer 407 by solvent evaporation method may result in higher aqueous solubility of the drug. Also sustained release tablets containing solid dispersion granules of ibuprofen, using HPMC K100M may be a promising approach to extend the release rate of the drug from the solid dispersion for 12 h.

scholarly journals Co-crystallization of quercetin and isonicotinamide using solvent evaporation method

2021 ◽  
Vol 18 (4) ◽  
pp. 697-702
Author(s):  
Budipratiwi Wisudyaningsih ◽  
Dwi Setyawan ◽  
Siswandono
Keyword(s):  
Minimum Energy ◽  
Solvent Evaporation ◽  
Crystal Habit ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Dissolution Profile ◽  
Solvent Evaporation Method ◽  
Scanning Calorimetry ◽  
Evaporation Method

Purpose: To obtain quercetin-isonicotinamide co-crystal (CQINA) with improved physicochemical and in-vitro dissolution characteristics. Methods: Co-crystallization of quercetin (Q) and isonicotinamide (INA) in molar ratio of 1:1 was performed using solvent evaporation method with the addition of 50 mL of ethanol (99.9%, v/v). The resultant solution was thoroughly mixed and stirred at room temperature for 48 h to slowly evaporate the solvent until CQINA was obtained. The co-crystal phase was characterized using differential scanning calorimetry (DSC), powder x-ray diffractometry (PXRD), scanning electron microscopy (SEM), and fourier transform infrared (FTIR) spectroscopy. In-vitro dissolution was performed by USP method II in 900 mL citrate buffer (pH 5.0 ± 0.05), with stirring at 100 rpm and at 37 ± 0.5 °C. Results: Computational approach predicted the formation of hydrogen bonds between Q and coformers used, and the interaction involved minimum energy. In CQINA thermogram, a new endothermic peak was formed with a melting point of 255.26 °C, while Q (314.85 °C) and INA (156.62 °C). Images from DSC, PXRD, SEM and FTIR showed that the crystal habits and morphologies of the CQINA differed from those of the original components. There was an improvement in the dissolution profile of CQINA, when compared with those of the original components. Conclusion: Q and INA subjected to solvent evaporation result in the formation of a CQINA with different crystal habit, which possess physicochemical characteristics different from those of its constituents. Modification of Q crystals in CQINA increases its in vitro dissolution, making it a potential pharmaceutical agent.

scholarly journals Formulation and evaluation of floating microspheres of losartan potassium using sodium alginate and HPMC by solvent evaporation method

2019 ◽  
Vol 9 (1-s) ◽  
pp. 60-66 ◽  
Author(s):  
Kapil Purohit ◽  
Navneet Garud
Keyword(s):  
Drug Release ◽  
Solvent Evaporation ◽  
Losartan Potassium ◽  
Solvent Evaporation Method ◽  
In Vitro Drug Release ◽  
Evaporation Method ◽  
Sustained Action ◽  
Improve Patient

Hollow multі-unіt mіcrospheres were prepared by a solvent dіffusіon technіque іn emulsіon wіth a drug and an acrylіc polymer. These were dіssolved іn a mіxture of ethanol-dіchloromethane and poured іnto an aqueous solutіon of PVA wіth stіrrіng to form emulsіon droplets. The rate of drug release іn mіcro balloons was controlled by changіng the ratіo of polymer to drug. The mіcroballoons were floatіng іn vіtro for 12-24 hours when submerged іn aqueous medіa. Radіographіc studіes showed that mіcroballons admіnіstered orally to humans were dіspersed іn the upper part of the stomach and were held there for 3 hours agaіnst perіstaltіc movement. Floating Microspheres of Losartan potassium were formed by Solvent Evaporation method .The formulas LP7 of Losartan Potassium Floating Microspheres shows a very good drug release profiles and shown better sustained action till the end of last hour (24th hrs). It will improve patient compliance and increase in bioavailability which give better approach to treat hypertensive condition and the angiotensin receptor blocking action of Losartan lower the long term complications of Hypertension and reduce the risk of heart failure, CHF, Myocardial Infarction and also vascular damage in blood vessels and kidney. Keywords: Losartan Potassium, Floating microspheres, Drug Entrapment, In-vitro drug release.

scholarly journals Design and Development of Sustained Release Microspheres of Ibuprofen by Emulsification Solvent Evaporation Method Using Polymeric Blend

2013 ◽  
Vol 16 (1) ◽  
pp. 39-44 ◽  
Author(s):  
Nandini Saha ◽  
Ikramul Hasan ◽  
Mehrina Nazmi ◽  
Md Selim Reza
Keyword(s):  
Drug Release ◽  
Fourier Transforms ◽  
In Vitro Release ◽  
Pharmaceutical Journal ◽  
Solvent Evaporation ◽  
Solvent Evaporation Method ◽  
Evaporation Method ◽  
Dissolution Apparatus ◽  
Emulsification Solvent Evaporation

Ibuprofen, a non-steroidal anti-inflammatory drug was formulated as microspheres by using Methocel K4M & Eudragit RSPO. These microspheres were prepared by emulsification solvent evaporation method to provide sustained action and to minimize local side effect of Ibuprofen by avoiding the drug release in the upper gastrointestinal tract. The prepared microspheres were subjected to various evaluation and in-vitro release studies. In-vitro drug release was studied in a paddle type dissolution apparatus (USP Type II Dissolution Apparatus) using Phosphate buffer (pH 7.4) as the dissolution medium at 37.5oC for 6 hours (paddle speed 50 RPM). The release mechanisms were explored and explained with Zero Order, First Order, Higuchi and Korsmeyer-Peppas equations. The correlation coefficients values of the trend lines of the graphs showed that the formulations best fit with Korsmeyer-Peppas release pattern. Microspheres’ morphology and chemical integrity were studied by a scanning electron microscope (SEM) and Fourier transforms infrared spectroscopy (FTIR) respectively. DOI: http://dx.doi.org/10.3329/bpj.v16i1.14489 Bangladesh Pharmaceutical Journal 16(1): 39-44, 2013

scholarly journals Preparation and Release Profiles in Vitro/Vivo of Galantamine Pamoate Loaded Poly (Lactideco-Glycolide) (PLGA) Microspheres

2021 ◽  
Vol 11 ◽  
Author(s):  
Liping Du ◽  
Shankui Liu ◽  
Guizhou Hao ◽  
Li Zhang ◽  
Miaomiao Zhou ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Solvent Evaporation Method ◽  
Sustained Drug Release ◽  
Water Emulsion ◽  
Oil Water

Patient’s poor compliance and the high risk of toxic effects limit the clinical use of galantamine hydrobromide. To overcome these drawbacks, the sustained-release galantamine pamoate microspheres (GLT-PM-MS) were successfully developed using an oil/water emulsion solvent evaporation method in this study. Physicochemical properties of GLT-PM-MS were carefully characterized, and the in vitro and in vivo drug release behaviors were well studied. Results showed that the morphology of optimized microspheres were spherical with smooth surfaces and core-shell interior structure. Mean particle size, drug loading and entrapment efficiency were 75.23 ± 1.79 μm, 28.01 ± 0.81% and 87.12 ± 2.71%, respectively. The developed GLT-PM-MS were found to have a sustained release for about 24 days in vitro and the plasma drug concentration remained stable for 17 days in rats. These results indicated that GLT-PM-MS could achieve the sustained drug release purpose and be used in clinical trial.

scholarly journals Development and In-Vitro Evaluation of Betahistine Hydrochloride microspheres by Emulsification Solvent Evaporation Method

1970 ◽  
Vol 7 (5) ◽  
pp. 30-36
Author(s):  
Sandeep A Wathore
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Tween 80 ◽  
Solvent Evaporation ◽  
Solvent Evaporation Method ◽  
Evaporation Method ◽  
Ftir Studies ◽  
Emulsification Solvent Evaporation ◽  
Polymer Ratio

The formulation of floating microspheres of Betahistine hydrochloride by the o/w emulsification and solvent evaporation method in the presence of tween 80 as an emulsifying agent. The influence of formulation factor Drug: Polymer ratio on particle size, encapsulation efficiency and invitro release characteristics of the microspheres were investigated. The microspheres have been analyzed for their size, drug loading capacity and drug release study. Spherical and smooth surfaced microspheres with desired encapsulation efficiencies were obtained. Slow drug release from microspheres observed up to 12 h. for formulation F4, F5. Optimized formulation F4 was evaluated for FTIR, DSC, SEM. DSC and FTIR studies showed that the nature of pure drug Betahistine hydrochloride remains unaffected till the completion of process of microspheres formation. SEM photographs showed that the Floating microspheres were spherical in nature with smooth surface and uniform distribution of the drug within the microsphere. Keywords: 

Sign in / Sign up

Export Citation Format

Share Document