scholarly journals Correlation coefficient and path analysis studies in tomato (Solanum lycopersicum L.)

2021 ◽  
Vol 23 (2) ◽  
pp. 175-180
Author(s):  
RAJEEV KUMAR ◽  
Keyword(s):  
Path Analysis ◽  
Solanum Lycopersicum ◽  
Correlation Coefficient ◽  
Negative Correlation ◽  
Significant Negative Correlation ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Solanum Lycopersicum L ◽  
Positive Correlations ◽  
Positive Direct

The investigation was carried out at the Horticulture Research Farm of the B.B.A. University, Lucknow (UP), India during rabi season of 2017-18 and 2018-19 to. Study the correlation coefficient and path analysis in tomato (Solanum lycopersicum L.). The twenty genotypes were evaluated in randomized block design with three replication. Genotypic correlation coefficient was indicated that fruit yield (q ha-1) exhibited highly significant positive correlations with average fruit weight (1.042), fruits per plant (0.996), branches per plant (0.831) and fruits per cluster (0.749). It also registered significant negative correlation with days to 50 % flowering (-0.835). However, phenotypic correlation coefficient indicated that fruit yield (q ha-1) had highly significant positive correlations with fruits per plant (0.977), clusters per plant (0.893), average fruit weight (0.729) whereas, significant negative correlation with days to 50 % flowering (-0.178). Path analysis revealed that the traits like fruit yield kg/plot (1.430) and fruit yield per plant (0.034) exhibited positive direct effects on fruit yield and these traits also recorded positive correlation with yield. This suggested that direct selection based on these traits will be rewarding for crop yield improvement.

scholarly journals Genetic variability and trait relationship in cherry tomato (Solanum lycopersicum L. var. cerasiforme (Dunnal) A. Gray)

2013 ◽  
Vol 41 (2) ◽  
pp. 163-167 ◽  
Author(s):  
MS Islam ◽  
HC Mohanta ◽  
MR Ismail ◽  
MY Rafii ◽  
MA Malek
Keyword(s):  
Genetic Variability ◽  
Solanum Lycopersicum ◽  
Fruit Weight ◽  
Fruit Yield ◽  
High Yield ◽  
Genetic Advance ◽  
Cherry Tomato ◽  
Solanum Lycopersicum L ◽  
Wide Range ◽  
Additive Gene

Nine traits of 11 cherry tomato (Solanum lycopersicum L.) var. cerasiforme (Dunal) A. Gray) inbred lines exhibited a wide range of genetic variability. High geno- and phenotypic coefficients of variation were obtained for individual fruit weight (68.16 and 74.23%, respectively) followed by number of fruits/plant (58.8 and 68.34%, respectively). High estimates of heritability, genetic advance and genotypic coefficient of variation for the traits of individual fruit weight, number of fruits and clusters/plant were controlled by additive gene action indicating the possibility of selection to improve these characters. Fruit yield/plant showed low heritability along with low genetic advance and did not show significant and positive correlation with the remaining characters. It indicates that improvement of high yield through selection is difficult, rather hybridization can be effective for improving the fruit yield/plant. Among the lines, CH154 produced the highest number of fruits/plant (291) and highest fruit yield (1.89 kg/plant and 63.4 t/ha) and can be selected for cultivation under Bangladesh condition. DOI: http://dx.doi.org/10.3329/bjb.v41i2.13443 Bangladesh J. Bot. 41(2): 163-167, 2012 (December)

scholarly journals Mitigating Natural Heat Stress for Tomato (Solanum lycopersicum L) Production through Management Techniques

2021 ◽  
pp. 7-18
Author(s):  
Tika Ram Chapagain ◽  
Arjun Kumar Shrestha ◽  
Moha Dutta Sharma ◽  
Kalyani Mishra Tripathi ◽  
Aravind Srivastava
Keyword(s):  
Solanum Lycopersicum ◽  
Rice Husk ◽  
Production Management ◽  
Monsoon Season ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Late Winter ◽  
Tomato Production ◽  
Solanum Lycopersicum L ◽  
Management Techniques

An experiment was conducted to identify suitable production management techniques for tomato (Solanum lycopersicum L.) cultivation during late winter-pre monsoon season in plains of Nepal. For this, organic mulches (rice straw, dried grass, and rice husk) were compared with SN (shade net) and no-mulch (bare field) condition for tomato yield in 2018 and 2019. The pooled analysis of all observed morphological and yield traits were performed and they differed significantly. Rice husk significantly affected number of fruits per inflorescence though number of inflorescence per plant and flowers per inflorescence were similar among organic mulches. The highest fruit yield per plant (4.44 kg plant-1) was obtained with rice husk, the other mulches and SN were at par but the lowest yield (2.75 kg plant-1) was obtained with no-mulch. Similarly, rice husk mulch contributed to the highest number of fruits per inflorescence (5.22), highest fruit weight (46.58 g) and diameter (4.99 cm).Fruit yield positively and significantly associated with fruit per inflorescence(0.78***), fruit diameter (0.65***) and an average fruit weight (0.56***).Organic mulches significantly (p=0.05) contributed to higher yield (86.01 t ha-1) over SN (76.55 t ha-1).Higher values for total soluble solid, Vitamin C and fruit firmness were observed under rice husk mulching. The result of the present study found rice husk mulching as better option for tomato production as compared to SN and no-mulch condition.

scholarly journals Genetic Variability, Correlation and Path Coefficient Analysis in F2 Segregating Population in Tomato (Solanum lycopersicum L.)

2017 ◽  
Vol 104 (.1-.4) ◽  
Author(s):  
Gopinath P ◽  
◽  
Irene Vethamoni P
Keyword(s):  
Genetic Variability ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Direct Selection ◽  
Path Coefficient ◽  
Genetic Advance ◽  
Solanum Lycopersicum L ◽  
F2 Population ◽  
Positive Direct ◽  
Pericarp Thickness

Genetic variability, heritability and genetic advance for fifteen yield contributing traits were studied in F2 population obtained from the cross of Arka Vikas × EC 519809. The study indicated that existence of considerable amount of genetic variability for all the characters studied. The characters viz., fruit yield per plant, number of fruits per plant, number of primary branches, total phenol and pericarp thickness exhibited higher values of genotypic and phenotypic coefficient of variation. Whereas, fruit yield per plant, individual fruit weight, pericarp thickness and number of primary branches per plant exhibited high estimates of heritability and genetic advance for yield per plant and average fruit weight. These characters can be effectively improved through selection. Correlation indicated that yield was significantly and positively associated with plant height, number of flowers per cluster, percent fruit set, fruit length, fruit diameter, individual fruit weight and number of fruits per plant. Number of fruits per cluster and number of fruits per plant showed the highest positive direct effect on fruit yield per plant. Direct selection may be executed considering these traits as the main selection criteria to reduce indirect effect of other characters during development of high yielding tomato variety.

THE EFECTS OF A CULTIVATION METHOD ON TOMATO YIELD SOLANUM LYCOPERSICUM L.

2019 ◽  
pp. 434-437
Author(s):  
Ivica Stančić ◽  
Jelica Živić ◽  
Saša Petrović ◽  
Desimir Knežević
Keyword(s):  
Solanum Lycopersicum ◽  
Total Yield ◽  
Market Value ◽  
Fruit Weight ◽  
Training System ◽  
Fruit Yield ◽  
Average Yield ◽  
Cultivation Method ◽  
Solanum Lycopersicum L ◽  
Tomato Yield

Investigated the effect of different forms of training system the yield of tomatoes in greenhouses. The study involved the genetic forms of tomatoes with one, two and three trees. The influence of training system on the number of fruits per plant, fruit weight, fruit yield per plant and fruit yield per m2. The highest average yield per plant was achieved by growing tomatoes in the three trees, planting a tree in the form given by the average large fruit, and the highest number of fruits per plant was obtained with the training system with three trees, and the lowest in the training system on a tree. When growing on a tree reaches maturity at the earliest, and larger fruits, and the growing maturation of the two trees is a little later, the fruits are slightly smaller, but higher total yield of tomatoes. Growth on three trees achieved the highest yield, but the fruit is considerably smaller, which reduces their market value.

scholarly journals Heterosis in Tomato (Solanum lycopersicum L.) for Yield and Yield Component Traits

2020 ◽  
pp. 141-152
Author(s):  
Desalegn Negasa Soresa ◽  
Gomathi Nayagam ◽  
Netsanet Bacha ◽  
Zerihun Jaleta
Keyword(s):  
Solanum Lycopersicum ◽  
Yield Components ◽  
Diallel Cross ◽  
Fruit Weight ◽  
Yield Component ◽  
Fruit Yield ◽  
F1 Hybrids ◽  
Solanum Lycopersicum L ◽  
Yield Component Traits ◽  
Marketable Fruit

Estimates of heterosis for F1 hybrids over mid and better parent were computed for traits that showed significant differences between genotypes on analysis of variance. Heterosis for yield components and yield was studied using 8x8 half diallel cross in tomato (Solanum lycopersicum L.). The heterosis for yield was generally accompanied by heterosis for yield components. Heterosis for marketable fruit yield per plant ranged from (-63.4%) (P3xP8) to (33.8%) (P6xP8) and (-62.5%) (P3xP8) to (52.6%) (P5xP7), for mid parent and better parent respectively. Significant heterosis over better and mid-parent was observed for all the traits.  Best parent and Mid-parent heterosis (MPH) was highest  and in desirable direction for number of marketable fruit per plant  (29.3%; 29.2%)  in crosses ( P3xP6 for both ) and pericarp thickness  (46.3%; 57.6%) in crosses (P2xP6 and P4xP8), number of fruit cluster per plant (32.8%; 35.9%) in cross (P3xP6 for both), individual fruit weight (36.1%; 41.2%) in cross (P2xP8, P3xP5) and fruit diameter (28.4%; 28.3%) in cross (P3xP5; P2xP6), fruit length (23.07%; 20.4%)  in cross (P2xP6 for both). Out of 28 F1 crosses, positive and desirable heterosis by 10 crosses over better parent and 17 crosses over mid-parent were observed for total fruit density in tomato. An important heterosis both in heterobeltiosis and mid-parent was recorded in marketable fruit yield in ton per hectare. From all the crosses, seven crosses revealed positive from which three crosses are the most important P2xP7 (31%),  P3xP5 (20%) and P3xP6 (54%) in better parent heterosis. Similarly for mid-parent heterosis, only ten crosses out of 28 reveled positive while the rest 18 crosses showed the undesirable direction for marketable fruit yield indicating majority of the hybrids exhibited unfavorable heterotic response and only a few hybrids could be considered for selection.

scholarly journals Effect of Plant density and Fertilizer Application Rates on Growth, Fruit Yield and Quality of Tomato (Solanum lycopersicum L.) in Greenhouse Condition

2021 ◽  
pp. 22-31
Author(s):  
Mai Hai Chau ◽  
Ngo Xuan Chinh
Keyword(s):  
Solanum Lycopersicum ◽  
Plant Density ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Fertilizer Rate ◽  
Tomato Cultivar ◽  
Solanum Lycopersicum L ◽  
Yield And Quality ◽  
Fruit Setting ◽  
Marketable Fruit

Plant density and fertilization are key practices for improving the fruit quality and yield of vegetables grown in greenhouses. The experiment was performed to investigate the effects of density and fertilization on the fruit yield and quality, economic efficiency of Solanum lycopersicum L. at Duc Trong district of Lam Dong province. The density (50,000; 33,000; 25.000 plants ha-1) and the fertilizer rates (240N – 100P2O5 – 275K2O; 300N – 125P2O5 – 344K2O; 360N – 150P2O5 – 413K2O kg and 420N – 175P2O5 – 482K2O kg ha-1) were studied in a completely randomised split plot design with three blocks. The fertilizer rate (420N – 175P2O5 – 482K2O kg ha-1) was produced the highest height (562.39 cm), fruit setting rate (69.87%), number of fruit per plant (95.65 fruits), average fruit weight (106.37 g), fruit yield (441.11 tons ha-1) and marketable fruit yield (204.31 tons ha-1). The density (25,000 plants ha-1) gave the highest fruit setting rate (75.35%), number of fruit per plant (94.84 fruits), average fruit weight (113.24 g), individual fruit yield (10.02 kg per plant) and fruit yield (501.17 tons ha-1). The combination of density (25,000 plants ha-1) and fertilizer rate (420N – 175P2O5 – 482K2O kg ha-1) have the highest fruit yield (613.5 tons ha-1), marketable fruit yield (223.91 tons ha-1) and rate of return (2.44). In addition, this combination was the best density and fertilizer level management strategy for greenhouse-grown Lahay 334 tomato cultivar in Lam Dong province, Vietnam.

scholarly journals Variability and inter relationship studies in tomato (Solanum lycopersicum L.)

2016 ◽  
Vol 13 (1) ◽  
pp. 65-69
Author(s):  
MZ Ullah ◽  
L Hassan ◽  
Sonia Binte Shahid ◽  
AK Patwary
Keyword(s):  
Fruit Weight ◽  
Fruit Yield ◽  
Direct Selection ◽  
Phenotypic Correlation ◽  
Path Coefficient ◽  
Solanum Lycopersicum L ◽  
Locule Number ◽  
High Heritability ◽  
Positive Direct ◽  
Fruit Diameter

Twenty parental genotypes of tomato were planted and observed of yield and yield attributing traits to measure genetic variability, character association and path coefficient analysis. Parent TM 371 ranked first with respect to yield (4.73 kg fruit yield per plant) followed by TM 390. In terms of average fruit weight TM 390 also was better performer. Analysis of variance for each trait showed significant differences among the genotypes. High genotypic and phenotypic coefficients of variation were recorded for fruits per plant, locule number per fruit and fruit yield per plant. Heritability was observed high for flowers per cluster, fruits per plant, fruit weight and fruit length. fruit per plant (52.30), followed by fruit weight (46.32).High heritability associated with high genetic advance was observed for fruits per plant (52.30) and fruit weight (46.32) and flower per cluster (33.50). Selection for such traits might be effective for the fruit yield improvement of tomato. Significant positive genotypic and phenotypic correlation was observed of fruits per plant, fruit weight, fruit diameter and locule number per fruit with fruit yield per plant indicated that selection strategies must be focus on these traits. Fruit diameter showed the highest positive direct effect (3.25) on fruit yield per plant followed by fruits per plant (1.54). Direct selection may be executed considering these traits as the main selection criteria to reduce indirect effect of the other characters during the development of high yielding tomato variety.J. Bangladesh Agril. Univ. 13(1): 65-69, June 2015

scholarly journals ​Estimation of Yield and Yield-related Traits among Seedling Colnes of Mango [Mangifera indica (L.) Cv. Langra] using Correlation and Path Coefficient

2021 ◽  
Author(s):  
Megha Rajpoot ◽  
T.R. Sharma ◽  
R.M. Sharma
Keyword(s):  
Path Analysis ◽  
Correlation Coefficient ◽  
Environmental Influence ◽  
Mangifera Indica ◽  
Great Influence ◽  
Residual Effect ◽  
Fruit Yield ◽  
Path Coefficient ◽  
Research Station ◽  
Positive Direct

Background: Mango is one of the most important fruits in the world. The superior position of mango is due to its very wide and variety utilization and because of that, the main goal of all mango breeding programs is to obtain new inbred and hybrids that will outperform the existing hybrids concerning many traits for efficient selection of fruit yield, like the most important economic traits, regarding its on the great influence the environmental factors, has a complex mode of inheritance and low heritable is necessary to know the relation between fruit yield and other traits which are influencing on fruit yield. The current study aimed to verify the variability and correlation between the traits in fruit yield, to practice indirect selection. Methods: In this field investigation during 2018-19, Forty diverse clones (vegetative propagate) of mango cv. Langra were selected on Fruit Research Station (Farm), Imalia, Jawaharlal Nehru Krishi Vishwa Vidyalaya, Jabalpur (M.P.) to determine the genotypic correlation along with their direct and indirect effects through path coefficient analysis in mango as to estimate the contribution of most important characters towards yield. Result: Yield was positively and significantly correlated with panicle length (0.38**), length of leaves (0.22*). The residual effect of path analysis was -0.06 revealed higher genetic variability and also proved a lower per cent of environmental influence on the selected characters of mango clones of Langra. Higher positive direct effects on yield were exhibited by the length of leaves, the width of leaves, flower shoot length, number of panicles, number of flowers, and fruit drop %. In combination with correlation coefficient and path analysis, it was found that the length of leaves gave a significant positive correlation coefficient with yield and also produce a high positive direct effect.

scholarly journals Correlation and Path Analysis Studies on Yield and Yield Components in Musk Melon (Cucumis melo L.)

2021 ◽  
pp. 130-136
Author(s):  
S. Nanthakumar ◽  
R. S. Sankar ◽  
D. Rameshkumar
Keyword(s):  
Path Analysis ◽  
Cucumis Melo ◽  
Tamil Nadu ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Path Coefficient ◽  
Fruit Length ◽  
Correlation And Path Analysis ◽  
Positive Direct ◽  
Cucumis Melo L

Problem: The correlation co-efficient indicates the nature of association among the different traits, path analysis splits the correlation co-efficient into measure of direct and indirect effects thus providing understanding of the direct and indirect association of each character towards yield. Methods: An experiment on correlation and path analysis involving thirty F1 and six parents in muskmelon (Cucumis melo L.) was carried out at Department of Horticulture, Adhiparasakthi Agricultural College, Kalavai, Vellore district, Tamil Nadu India. Results: The fruit yield per plant had exhibited highly significant and positive correlation with individual fruit weight (0.845), fruit diameter (0.656), fruit length (0.536) and flesh thickness (0.503). Path coefficient analysis revealed that the characters viz., fruit weight exerted the highest positive direct effect (1.034) on fruit yield per vine followed by number of fruits per vine (0.497), days to first female flower anthesis (0.088), vine length (0.072) and fruit length (0.070). Conclusion: The fruit yield per plant can be improved by making selection of these traits in yield improvement programme.

scholarly journals The Role of Staking and Pruning Methods on Yield and Profitability of Tomato (Solanum lycopersicum L.) Production in the Guinea Savanna Zone of Ghana

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
S. Lamptey ◽  
E. Koomson
Keyword(s):  
Solanum Lycopersicum ◽  
Block Design ◽  
Tomato Fruit ◽  
Northern Region ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Solanum Lycopersicum L ◽  
Tomato Yield ◽  
Yield Quality ◽  
Pruning Methods

Tomato is one of the most widely consumed and produced vegetables in Ghana. The low yield of tomatoes in Ghana has resulted in huge importation of the produce from neighboring countries. Good agronomic practices are among the key strategies involved in increasing the yield of horticultural produce. This study seeks to evaluate the response of staking and pruning on tomato fruit yield, quality, and cost of production. To achieve this, a field experiment was conducted to investigate the effect of staking and pruning methods on fruit yield and profitability of tomato (Solanum lycopersicum L.) produced in the northern region of Ghana. Treatments were applied in a randomized complete block design with three replications. Treatments were no pruning + no staking (control), single pole staking (SPS), wire trellis (WT), one-stem pruning (1SP), one-stem pruning + single pole staking (1SP + SPS), one-stem pruning + wire trellis (1SP + WT), two-stem pruning (2SP), two-stem pruning + single pole staking (2SP + SPS), and two-stem pruning + wire trellis (2SP + WT). Results showed that 2SP + WT increased fruit diameter, fruit length, and marketable fruit weight by 52%, 32%, and 69%, respectively, compared to the control. The maximum number and weight of marketable fruits obtained from 2SP + WT increased total fruit yield by 76% compared to the control. In all, the performance of the treatments in terms of yield was in the following order: 2SP + WT > 1SP + WT > SPS > WT > 2SP + SPS > 1SP > 2SP > control. Though 2SP + WT increased production cost by 42%, it greatly increased yield by 69% which resulted in 83% net profit compared to the control. Thus, 2SP + WT could be tested on-farm for possible adoption to increase tomato yield, quality, and profit.

Sign in / Sign up

Export Citation Format

Share Document