scholarly journals USE OF FUSED DEPOSITION MODELING PROCESS IN INVESTMENT PRECISION CASTING AND RISK OF USING SELECTIVE LASER SINTERING PROCESS

2012 ◽  
pp. 226-230
Author(s):  
SIVADASAN M ◽  
N.K SINGH ◽  
ANOOP KUMAR SOOD
Keyword(s):  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Thermal Response ◽  
Acrylonitrile Butadiene Styrene ◽  
Laser Sintering ◽  
Precision Casting ◽  
Fused Deposition ◽  
Rp Process ◽  
Deposition Modeling ◽  
Metallic Parts

Investment Castings (IC) is one of the most economical ways to produce intricate metallic parts when forging, forming and other casting processes tend to fail. However, high tooling cost and long lead time associated with the fabrication of metal moulds for producing IC wax (sacrificial) patterns result in cost justification problems for customized single casting or small-lot production. Generating pattern using rapid prototyping (RP) process may be one of the feasible alternatives. For this purpose present study assessed the suitability of the fused deposition modeling (FDM) process for creating sacrificial IC patterns by studying FDM fabricated part thermal response at various temperatures. A series of experiments with RP patterns are conducted and a set of test castings are also made in steel for establishing feasibility. The build material used is acrylonitrile butadiene styrene (ABS). As an annexe to this work a concurrent attempt is also made to quantify the risk in using Selective Laser Sintering patterns for Investment Castings. Authors hope this work might establish applicability of ABS in IC and also lead the investigations to theoretically tone down the shell cracking tendency with Selective Laser Sintering patterns when Proprietary Duraform is used as the build material.

scholarly journals Additive Manufacturing: A next gen fabrication

2018 ◽  
Vol 8 (01) ◽  
Author(s):  
Prajakta Subhedar
Keyword(s):  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Consumer Products ◽  
Cad Model ◽  
Final Model ◽  
Fused Deposition ◽  
Layer Manufacturing ◽  
Deposition Modeling

A class of technologies referring to Rapid Prototyping (RP) or Additive or Layer Manufacturing or 3D Printing allows designers to quickly create tangible prototype instead of using two dimensional pictures. This technology produces models and prototype parts from 3D CAD model data created from 3D object digitizing systems. Rapid Prototyping forms parts by joining together liquid, powder or sheet materials. Physical models are built using three basic stages: pre-processing, building, post-processing. Pre-processing consists of generation of CAD model, convert into STL format and slice the STL files into cross sectional layers. In building process, construction of model takes place one layer atop another. Post process consists of cleaning and finishing the final model. Common types of Rapid Prototyping technologies popular in industry are: Steriolithography, Fused Deposition Modeling, Selective Laser Sintering, Laminated Object Manufacturing,3 D Printing. The selection of the processes depends upon the material to be cured to build the final model. Rapid Prototyping technologies are used in various industries like Automobiles, Consumer products, Medical, Academics, Aerospace, Government and Military. This poster talks about few challenges to be considered in Rapid Prototyping like shrinkage and distortion of final model, mechanical performance of RP model and limitations to mass quantity. : Layer Manufacturing, CAD Model, STL format, Steriolithography, Fused Deposition Modeling, Selective Laser Sintering.

scholarly journals МЕТОД СОЗДАНИЯ МОДЕЛЕЙ САМОЛЕТОВ С ПОМОЩЬЮ СИСТЕМ CAD/CAM/CAE И АДДИТИВНЫХ ТЕХНОЛОГИЙ

2018 ◽  
pp. 24-34
Author(s):  
Ю. Б. Витязев ◽  
А. Г. Гребеников ◽  
А. М. Гуменный ◽  
А. М. Ивасенко ◽  
А. А. Соболев
Keyword(s):  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Additive Technologies ◽  
Direct Metal Laser Sintering ◽  
Fused Deposition ◽  
Cad Cam ◽  
Deposition Modeling ◽  
Laser Stereolithography

The analysis of the most applicable in mechanical engineering additive technologies (fused deposition modeling, selective laser sintering, laser stereolithography, direct metal laser sintering) have been performed. Method of creating airplane models using CAD/CAM/CAE systems and additive manufacturing is presented. The results of the application of selective laser sintering and fused deposition modeling for the manufacture of training aircraft models are considered.

Comparative Analysis of Different Methods of Rapid Tooling

2005 ◽  
Vol 475-479 ◽  
pp. 2873-2876
Author(s):  
Charles Martin ◽  
J.V. Sasutil ◽  
M. Kouhkan ◽  
E. Lorea ◽  
Rafiq Noorani
Keyword(s):  
Surface Roughness ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Dimensional Accuracy ◽  
Laser Sintering ◽  
Rapid Tooling ◽  
Composite Manufacturing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Overall Performance

The purpose of this experiment was to compare different techniques that help improve conventional tooling. The methods investigated were chosen from both the methods of Rapid Tooling: direct and indirect. Six different methods were selected including, Sand Casting, Investment Casting, Fused Deposition Modeling (FDM), Direct Composite Manufacturing (DCM), Selective Laser Sintering (SLS), and Stereolithography (SLA). Several industrial corporations were contacted to help complete all six tests. Five parameters were selected for the comparison of these samples: dimensional accuracy, tensile strength, surface roughness, time for completion, and weight. Through comparison the strengths and weaknesses of each method was determined. It was found that different methods did better in various parameters. However, Selective Laser Sintering (SLS) seemed to have the best overall performance.

An Update on the Use of Alginate in Additive Biofabrication Techniques

2019 ◽  
Vol 25 (11) ◽  
pp. 1249-1264 ◽  
Author(s):  
Amoljit Singh Gill ◽  
Parneet Kaur Deol ◽  
Indu Pal Kaur
Keyword(s):  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Layer By Layer ◽  
Three Dimension ◽  
Anionic Polymer ◽  
Fused Deposition ◽  
The Status ◽  
Deposition Modeling ◽  
Extrusion Printing

Background: Solid free forming (SFF) technique also called additive manufacturing process is immensely popular for biofabrication owing to its high accuracy, precision and reproducibility. Method: SFF techniques like stereolithography, selective laser sintering, fused deposition modeling, extrusion printing, and inkjet printing create three dimension (3D) structures by layer by layer processing of the material. To achieve desirable results, selection of the appropriate technique is an important aspect and it is based on the nature of biomaterial or bioink to be processed. Result & Conclusion: Alginate is a commonly employed bioink in biofabrication process, attributable to its nontoxic, biodegradable and biocompatible nature; low cost; and tendency to form hydrogel under mild conditions. Furthermore, control on its rheological properties like viscosity and shear thinning, makes this natural anionic polymer an appropriate candidate for many of the SFF techniques. It is endeavoured in the present review to highlight the status of alginate as bioink in various SFF techniques.

scholarly journals Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements

2021 ◽  
Vol 11 (3) ◽  
pp. 1272
Author(s):  
Bartłomiej Podsiadły ◽  
Piotr Matuszewski ◽  
Andrzej Skalski ◽  
Marcin Słoma
Keyword(s):  
Carbon Nanotubes ◽  
Fused Deposition Modeling ◽  
Supply Voltage ◽  
Acrylonitrile Butadiene Styrene ◽  
Structural Elements ◽  
Filling Fraction ◽  
Fused Deposition ◽  
Structural Electronics ◽  
Measured Sample ◽  
Deposition Modeling

In this publication, we describe the process of fabrication and the analysis of the properties of nanocomposite filaments based on carbon nanotubes and acrylonitrile butadiene styrene (ABS) polymer for fused deposition modeling (FDM) additive manufacturing. Polymer granulate was mixed and extruded with a filling fraction of 0.99, 1.96, 4.76, 9.09 wt.% of CNTs (carbon nanotubes) to fabricate composite filaments with a diameter of 1.75 mm. Detailed mechanical and electrical investigations of printed test samples were performed. The results demonstrate that CNT content has a significant influence on mechanical properties and electrical conductivity of printed samples. Printed samples obtained from high CNT content composites exhibited an improvement in the tensile strength by 12.6%. Measurements of nanocomposites’ electrical properties exhibited non-linear relation between the supply voltage and measured sample resistivity. This effect can be attributed to the semiconductor nature of the CNT functional phase and the occurrence of a tunnelling effect in percolation network. Detailed I–V characteristics related to the amount of CNTs in the composite and the supply voltage influence are also presented. At a constant voltage value, the average resistivity of the printed elements is 2.5 Ωm for 4.76 wt.% CNT and 0.15 Ωm for 9.09 wt.% CNT, respectively. These results demonstrate that ABS/CNT composites are a promising functional material for FDM additive fabrication of structural elements, but also structural electronics and sensors.

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document