scholarly journals LOSS REDUCTION IN RDS USING DG BY ENHANCED LOSS INDEX FACTORS

2014 ◽  
pp. 44-48
Author(s):  
DR. N. VISALI ◽  
U. MEGHANA
Keyword(s):  
Distributed Generation ◽  
Load Flow ◽  
Loss Reduction ◽  
System Efficiency ◽  
Voltage Profile ◽  
Power Losses ◽  
Repeated Load ◽  
Loss Index ◽  
Improve Reliability

Distributed generation (DG) units reduce electric power losses and hence improve reliability and voltage profile. Determination of appropriate size and location of DG is important to maximize overall system efficiency. In this paper, loss index factor method has been presented to determine the appropriate size and proper allocation of DG in a distribution network. Results obtained from this method have been compared with using the repeated load flow method.

scholarly journals Loss Minimization of Power Distribution Network using Different Types of Distributed Generation Unit

2015 ◽  
Vol 5 (5) ◽  
pp. 918
Author(s):  
Su Hlaing Win ◽  
Pyone Lai Swe
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Distribution Network ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Optimum Location ◽  
Power Losses

A Radial Distribution network is important in power system area because of its simple design and reduced cost. Reduction of system losses and improvement of voltage profile is one of the key aspects in power system operation. Distributed generators are beneficial in reducing losses effectively in distribution systems as compared to other methods of loss reduction. Sizing and location of DG sources places an important role in reducing losses in distribution network. Four types of DG are considered in this paper with one DG installed for minimize the total real and reactive power losses. The objective of this methodology is to calculate size and to identify the corresponding optimum location for DG placement for minimizing the total real and reactive power losses and to improve voltage profile   in primary distribution system. It can obtain maximum loss reduction for each of four types of optimally placed DGs. Optimal sizing of Distributed Generation can be calculated using exact loss formula and an efficient approach is used to determine the optimum location for Distributed Generation Placement.  To demonstrate the performance of the proposed approach 36-bus radial distribution system in Belin Substation in Myanmar was tested and validated with different sizes and the result was discussed.

scholarly journals Impacts of Photovoltaic Distributed Generation Location and Size on Distribution Power System Network

2018 ◽  
Vol 9 (2) ◽  
pp. 905 ◽  
Author(s):  
N. Md. Saad ◽  
M. Z. Sujod ◽  
Lee Hui Ming ◽  
M. F. Abas ◽  
M. S. Jadin ◽  
...  
Keyword(s):  
Power Systems ◽  
Distributed Generation ◽  
Distribution System ◽  
Short Circuit ◽  
Rapid Development ◽  
Reducing Power ◽  
Load Flow ◽  
Voltage Profile ◽  
Power Losses ◽  
Distribution Grid

As the rapid development of photovoltaic (PV) technology in recent years with the growth of electricity demand, integration of photovoltaic distributed generation (PVDG) to the distribution system is emerging to fulfil the demand. There are benefits and drawbacks to the distribution system due to the penetration of PVDG. This paper discussed and investigated the impacts of PVDG location and size on distribution power systems. The medium voltage distribution network is connected to the grid with the load being supplied by PVDG. Load flow and short circuit calculation are analyzed by using DigSILENT Power Factory Software. Comparisons have been made between the typical distribution system and the distribution system with the penetration of PVDG. Impacts in which PVDG location and size integrates with distribution system are investigated with the results given from the load flow and short circuit analysis. The results indicate positive impacts on the system interconnected with PVDG such as improving voltage profile, reducing power losses, releasing transmission and distribution grid capacity. It also shows that optimal locations and sizes of DGs are needed to minimize the system’s power losses. On the other hand, it shows that PVDG interconnection to the system can cause reverse power flow at improper DG size and location and increases short circuit level.

Optimal Placement of Distributed Generation in Power System for Power System Loss Reduction Using ETAP

2019 ◽  
Vol 16 ◽  
pp. 7-19 ◽  
Author(s):  
Suliman Khan ◽  
Salim Ur Rehman ◽  
Anees Ur Rehman ◽  
Hashmat Khan
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Renewable Energy Sources ◽  
Load Flow ◽  
Electric Power System ◽  
Optimization Techniques ◽  
Optimal Placement ◽  
Loss Reduction ◽  
Power Losses ◽  
Power Loss Reduction

Because of increasing interest in renewable energy sources in recent times, the studies concerning integration of Distributed Generation (DG) to power grid have been increased rapidly. Apart from other benefits, loss reduction and voltage profile improvement are its salient features. Non-optimal locations of DG units may lead to increase power losses. Optimal location of DGs in power systems is vital to maximize overall system efficiency. In this approach, optimization techniques have been applied to determine the optimal allocation and impact of DG on electric power system in terms of power loss reduction are analyzed. The Newton Raphson load flow analysis has been carried out on 10 bus system using ETAP software which shows that active power losses were reduced from 3302.2 KW to 400.7 KW after the installation of 5MW.

scholarly journals Optimal Sizing and Sitting of Distributed Generation for Power Quality Improvement of Distribution Network

2019 ◽  
Vol 4 (10) ◽  
pp. 18-23 ◽  
Author(s):  
Abubakar Bawa ◽  
Muhammad Uthman ◽  
Farouq E. Shaibu ◽  
Koledowo Saliu Oyewale
Keyword(s):  
Adverse Effect ◽  
Power Quality ◽  
Distributed Generation ◽  
Reactive Power ◽  
Distribution Network ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Losses ◽  
Optimal Sizing ◽  
Active And Reactive Power

The Point of Common Coupling (PCC) where suppliers’ responsibility and customers demand meet is of great concern due to increase degree of voltage variation assessment; valuable indicator of system conditions (voltage profile). Unstable condition of the power system outside operational or statutory limit, an adverse effect of nonlinear loads usually generate harmonics as well as fundamental frequency voltage variations and increase rate of power losses. These loads need to be compensated for. The major concerns of utility operations is to mitigate adverse effect of this system conditions. This research work focuses on optimal siting and sizing of Distributed Generation (DG) in a 43 bus distribution system. Power losses coupled with voltage deviation, considering objective function that compute present percentage losses in 11kV Dikko feeder, Abuja Electricity Distribution Company (AEDC), Suleja Distribution Network, Nigeria. We identified buses with poor voltage profile without DG installation and determined optimal sizing and siting of DGs where losses can be mitigated and power quality improved. ETAP version 12.6 2014 was used for load flow analysis to establish a decisive based case. The total load of the system considered was (3490 + j2700) kVA. Active and Reactive power losses in the system before DG installation were 246.300 kW and 289.903 kVAR respectively. DGs installation in the case study, has a considerable effects on loss reduction in the network. It is observed that 8.10% and 7.20% active and reactive power loss reduction was achieved while bus voltage improved by 0.4%. Genetic Algorithm Optimization techniques programmed in MATLAB 2015 software was used for optimal placement and sizing of the DG in the system.

scholarly journals Penetration effects of various kinds of distributed generation systems on the distribution system

2019 ◽  
Vol 8 (9) ◽  
pp. 596-600
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Load Flow ◽  
Voltage Profile ◽  
Power Losses ◽  
Generation System ◽  
Radial Distribution System ◽  
Real Power

Distributed generation system penetration in the existing distribution system is done for minimizing the losses and improving the voltage profile. There are total five types of distributed generation systems exist based on their power delivery like distributed generation system injecting real and reactive power, supplying real power only, supplying reactive power only, absorbing reactive power only , supplying real power and absorbing reactive power. All these five types of distributed generation systems have different penetration effects on the radial distribution system. We get different voltage profiles and power losses for different types of distributed generation systems. The testing of these five types of distributed generation systems will be done on IEEE 33 bus radial distribution system. For computing, the line parameters and power losses of the above testing system the forward-backward sweep load flow method will be applied

scholarly journals Reliability Analysis with Renewable DGs for Loss Reduction in Radial Distributed Generation

2021 ◽  
Vol 309 ◽  
pp. 01071
Author(s):  
R. Kavyasree ◽  
J. Sridevi ◽  
V. Usha Rani
Keyword(s):  
Power Systems ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Reducing Power ◽  
Cost Effective ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Losses ◽  
Joint System ◽  
Effective Manner

Nowadays, in the Evolving Power System, reliability testing plays an important role in the design and implementation of distribution systems that operate in a cost-effective manner with minimal customer load disruption. The distributed generation (DG) will play a major role in emerging Power systems as they use a variety of resources and technologies to harness energy in Power systems by reducing Power losses while maintaining the Voltage profile in the system within the limits set. In this paper, two case studies with one DG and two DGs were analysed. The results obtained showed that the DG Number with the plan will increase the reliability of the joint system. The proven system is verified before the IEEE 6-Bus Radial Distributed System to reflect exposure and impact on ETAP software.

scholarly journals Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital

2019 ◽  
Vol 8 (4) ◽  
Author(s):  
Mohd Effendi Amran ◽  
Mohd Nabil Muhtazaruddin ◽  
Nurul Aini Bani ◽  
Hazilah Mad Kaidi ◽  
Mohamad Zaki Hassan ◽  
...  
Keyword(s):  
Distributed Generation ◽  
Public Hospital ◽  
Green Building ◽  
Energy Performance ◽  
Optimization Approach ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Bee Colony ◽  
Line Loss ◽  
Current Setting

This paper presents an optimization approach for criteria setting of Renewable Distributed Generation (DG) in the Green Building Rating System (GBRS). In this study, the total line loss reduction is analyzed and set as the main objective function in the optimization process which then a reassessment of existing criteria setting for renewable energy (RE) is proposed towards lower loss outcome. Solar photovoltaic (PV)-type DG unit (PV-DG) is identified as the type of DG used in this paper. The proposed PV-DG optimization will improve the sustainable energy performance of the green building by total line losses reduction within accepted lower losses region using Artificial bee colony (ABC) algorithm. The distribution network uses bus and line data setup from selected one of each three levels of Malaysian public hospital. MATLAB simulation result shows that the PV-DG expanding capacity towards optimal scale and location provides a better outcome in minimizing total line losses within an appropriate voltage profile as compared to the current setting of PV-DG imposed in selected GBRS. Thus, reassessment of RE parameter setting and the proposed five rankings with new PV-DG setting for public hospital provides technical justification and give the best option to the green building developer for more effective RE integration.

scholarly journals ANALISIS PENGARUH INTERKONEKSI DISTRIBUTED GENERATION (PLTSA SUWUNG) TERHADAP RUGI-RUGI DAYA DAN KEANDALAN PADA PENYULANG SERANGAN

2015 ◽  
Vol 14 (2) ◽  
pp. 27
Author(s):  
I Made Gusmara Nusaman ◽  
I Wayan Sukerayasa ◽  
Rukmi Sari Hartati
Keyword(s):  
Distributed Generation ◽  
Power Plants ◽  
Flow Analysis ◽  
Ocean Waves ◽  
Load Flow ◽  
Ocean Current ◽  
Total Power ◽  
Small Scale ◽  
Renewable Energy Resources ◽  
Power Losses

The distributed generation technology or in this case abbreviated DG is a kind of power plants with small scale which prioritizes the utilization of renewable energy resources such as wind, water, solar, geothermal, ocean waves (Wave Energy), ocean currents (Ocean Current Energy), biomass, and biogass to produce the electrical energy with range of power generation between 1 kW-10 MW. One of the DG in Bali and still in operation is the garbage power plant which located in Suwung, South Denpasar. An analysis has been done using load flow analysis and reliability assessment to determine the effect of DG interconnection against the power losses and the level of reliability on the Serangan feeder. Based on the research that has been done, DG intercon-nection on the Serangan feeder decrease the power losses and increase the reliability and it can visible from the acquisition of SAIFI and SAIDI index which decreased. The best location of DG interconnection to get low of the power losses and the high level of reliability is at 97% from the total length of the feeder. At that location the power losses is decrease as big as 4.5 kW or 11.25% of the total power lossess without the DG interconnection and decrease of the SAIFI and SAIDI index respectively to 0.1 failure/customers/year and 1.4150 hour/ customer/year

scholarly journals Analytical description of power losses in a transformer operating in the dual active bridge converter

2016 ◽  
Vol 64 (3) ◽  
pp. 561-574
Author(s):  
R. Barlik ◽  
M. Nowak ◽  
P. Grzejszczak ◽  
M. Zdanowski
Keyword(s):  
Distributed Generation ◽  
High Frequency ◽  
Energy Flow ◽  
Single Phase ◽  
Renewable Energy Sources ◽  
Analytical Description ◽  
Power Losses ◽  
Dual Active Bridge ◽  
High Frequency Transformer

Abstract The paper presents an analytical approach to the determination of power losses in a high-frequency transformer operating in the dual active bridge (DAB). This transformer, having two single-phase transistor bridge inverters, couples two DC circuits that significantly differ in voltages (280 V and 51 V ±20%). Power losses in the core and windings of the planar transformer 5600 VA /100 kHz were calculated taking into account changes in the value and direction of the energy flow between the coupled DC circuits. These circuits represent storage or renewable energy sources and intermediate circuits of the converters used in distributed generation systems. Calculations were performed using the Steinmetz’s and Dowell’s equations. The analytical results have been verified experimentally.

Sign in / Sign up

Export Citation Format

Share Document