scholarly journals Impacts of Photovoltaic Distributed Generation Location and Size on Distribution Power System Network

2018 ◽  
Vol 9 (2) ◽  
pp. 905 ◽  
Author(s):  
N. Md. Saad ◽  
M. Z. Sujod ◽  
Lee Hui Ming ◽  
M. F. Abas ◽  
M. S. Jadin ◽  
...  
Keyword(s):  
Power Systems ◽  
Distributed Generation ◽  
Distribution System ◽  
Short Circuit ◽  
Rapid Development ◽  
Reducing Power ◽  
Load Flow ◽  
Voltage Profile ◽  
Power Losses ◽  
Distribution Grid

As the rapid development of photovoltaic (PV) technology in recent years with the growth of electricity demand, integration of photovoltaic distributed generation (PVDG) to the distribution system is emerging to fulfil the demand. There are benefits and drawbacks to the distribution system due to the penetration of PVDG. This paper discussed and investigated the impacts of PVDG location and size on distribution power systems. The medium voltage distribution network is connected to the grid with the load being supplied by PVDG. Load flow and short circuit calculation are analyzed by using DigSILENT Power Factory Software. Comparisons have been made between the typical distribution system and the distribution system with the penetration of PVDG. Impacts in which PVDG location and size integrates with distribution system are investigated with the results given from the load flow and short circuit analysis. The results indicate positive impacts on the system interconnected with PVDG such as improving voltage profile, reducing power losses, releasing transmission and distribution grid capacity. It also shows that optimal locations and sizes of DGs are needed to minimize the system’s power losses. On the other hand, it shows that PVDG interconnection to the system can cause reverse power flow at improper DG size and location and increases short circuit level.

scholarly journals Penetration effects of various kinds of distributed generation systems on the distribution system

2019 ◽  
Vol 8 (9) ◽  
pp. 596-600
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Load Flow ◽  
Voltage Profile ◽  
Power Losses ◽  
Generation System ◽  
Radial Distribution System ◽  
Real Power

Distributed generation system penetration in the existing distribution system is done for minimizing the losses and improving the voltage profile. There are total five types of distributed generation systems exist based on their power delivery like distributed generation system injecting real and reactive power, supplying real power only, supplying reactive power only, absorbing reactive power only , supplying real power and absorbing reactive power. All these five types of distributed generation systems have different penetration effects on the radial distribution system. We get different voltage profiles and power losses for different types of distributed generation systems. The testing of these five types of distributed generation systems will be done on IEEE 33 bus radial distribution system. For computing, the line parameters and power losses of the above testing system the forward-backward sweep load flow method will be applied

scholarly journals Reliability Analysis with Renewable DGs for Loss Reduction in Radial Distributed Generation

2021 ◽  
Vol 309 ◽  
pp. 01071
Author(s):  
R. Kavyasree ◽  
J. Sridevi ◽  
V. Usha Rani
Keyword(s):  
Power Systems ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Reducing Power ◽  
Cost Effective ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Losses ◽  
Joint System ◽  
Effective Manner

Nowadays, in the Evolving Power System, reliability testing plays an important role in the design and implementation of distribution systems that operate in a cost-effective manner with minimal customer load disruption. The distributed generation (DG) will play a major role in emerging Power systems as they use a variety of resources and technologies to harness energy in Power systems by reducing Power losses while maintaining the Voltage profile in the system within the limits set. In this paper, two case studies with one DG and two DGs were analysed. The results obtained showed that the DG Number with the plan will increase the reliability of the joint system. The proven system is verified before the IEEE 6-Bus Radial Distributed System to reflect exposure and impact on ETAP software.

The Impact of Synchronous Distributed Generation (DG) on Distribution System

2015 ◽  
Vol 785 ◽  
pp. 388-392 ◽  
Author(s):  
Hasmaini Mohamad ◽  
Shahrani Shahbudin ◽  
Nofri Yenita Dahlan
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
System Performance ◽  
Power Flow ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Voltage Profile ◽  
Before And After ◽  
Potential Benefits ◽  
The Impact

Interconnection of Distributed Generation (DG) in distribution system presents many potential benefits as well as drawbacks. The impacts of DG might vary with the types of generator. This paper presents a study on the impacts of synchronous DG's interconnection in distribution system. Steady state analysis is carried out to analyze the impact of DG on voltage profile and short circuit current considering before and after DG interconnection. Dynamic analysis is also performed for investigating the performance of DG when a part of distribution system is being islanded. Results show that the penetration of DG contributes to the changes of power flow in the system, hence give impacts to the overall system performance.

scholarly journals The Impact of Connecting Distributed Generation to the Distribution System

10.14311/986 ◽  
2007 ◽  
Vol 47 (4-5) ◽  
Author(s):  
E. V. Mgaya ◽  
Z. Müller
Keyword(s):  
Renewable Energy ◽  
Distributed Generation ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Electric Energy ◽  
Reducing Power ◽  
Effective Capacity ◽  
Voltage Profile ◽  
The Impact

This paper deals with the general problem of utilizing of renewable energy sources to generate electric energy. Recent advances in renewable energy power generation technologies, e.g., wind and photovoltaic (PV) technologies, have led to increased interest in the application of these generation devices as distributed generation (DG) units. This paper presents the results of an investigation into possible improvements in the system voltage profile and reduction of system losses when adding wind power DG (wind-DG) to a distribution system. Simulation results are given for a case study, and these show that properly sized wind DGs, placed at carefully selected sites near key distribution substations, could be very effective in improving the distribution system voltage profile and reducing power losses, and hence could  improve the effective capacity of the system. 

scholarly journals Integrated monte carlo-evolutionary programming technique for distributed generation studies in distribution system

2019 ◽  
Vol 8 (3) ◽  
pp. 978-984
Author(s):  
Nur Ainna Shakinah Abas ◽  
Ismail Musirin ◽  
Shahrizal Jelani ◽  
Mohd Helmi Mansor ◽  
Naeem M. S. Honnoon ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Distributed Generation ◽  
Distribution System ◽  
Optimization Technique ◽  
Evolutionary Programming ◽  
Test System ◽  
Voltage Profile ◽  
Power Losses ◽  
Programming Technique ◽  
Distributed Generations

This paper presents the optimal multiple distributed generations (MDGs) installation for improving the voltage profile and minimizing power losses of distribution system using the integrated monte-carlo evolutionary programming (EP). EP was used as the optimization technique while monte carlo simulation is used to find the random number of locations of MDGs. This involved the testing of the proposed technique on IEEE 69-bus distribution test system. It is found that the proposed approach successfully solved the MDGs installation problem by reducing the power losses and improving the minimum voltage of the distribution system.

scholarly journals Loss Minimization of Power Distribution Network using Different Types of Distributed Generation Unit

2015 ◽  
Vol 5 (5) ◽  
pp. 918
Author(s):  
Su Hlaing Win ◽  
Pyone Lai Swe
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Distribution Network ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Optimum Location ◽  
Power Losses

A Radial Distribution network is important in power system area because of its simple design and reduced cost. Reduction of system losses and improvement of voltage profile is one of the key aspects in power system operation. Distributed generators are beneficial in reducing losses effectively in distribution systems as compared to other methods of loss reduction. Sizing and location of DG sources places an important role in reducing losses in distribution network. Four types of DG are considered in this paper with one DG installed for minimize the total real and reactive power losses. The objective of this methodology is to calculate size and to identify the corresponding optimum location for DG placement for minimizing the total real and reactive power losses and to improve voltage profile   in primary distribution system. It can obtain maximum loss reduction for each of four types of optimally placed DGs. Optimal sizing of Distributed Generation can be calculated using exact loss formula and an efficient approach is used to determine the optimum location for Distributed Generation Placement.  To demonstrate the performance of the proposed approach 36-bus radial distribution system in Belin Substation in Myanmar was tested and validated with different sizes and the result was discussed.

scholarly journals Optimal Placement and Sizing of Distributed Generation in Distribution System using Analytical Method

2019 ◽  
Vol 8 (4) ◽  
pp. 6357-6363
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Network ◽  
Optimal Placement ◽  
Small Scale ◽  
Voltage Profile ◽  
Distribution Grid ◽  
Step Size ◽  
System Power

The reliability of distribution network can be improved with the penetration of small scale distributed generation (DG) unit to the distribution grid. Nevertheless, the location and sizing of the DG in the distribution network have always become a topic of debate. This problem arises as different capacity of DG at various location can affect the performance of the entire system. The main objective of this study is to recommend a suitable size of DG to be placed at the most appropriate location for better voltage profile and minimum power loss. Therefore, this paper presents an analytical approach with a fixed DG step size of 500 kW up to 4500 kW DG to analyses the effect of a single P-type DG in IEEE 33 bus system with consideration of system power loss and voltage profile. Four scenarios have been selected for discussions where Scenario 1: 3500 kW DG placed at node 3; Scenario 2: 2500 kW DG placed at node 6; Scenario 3: 1000 kW DG placed at node 18 and Scenario 4: 3000 kW DG placed at node 7. Results show that all the four scenarios are able to reduce the power loss and improve the voltage profile however Scenario 4 has better performance where it complies with minimum voltage requirement and minimizing the system power loss.

scholarly journals Siting and Sizing of DG in Medium Primary Radial Distribution System with Enhanced Voltage Stability

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Sanjay Jain ◽  
Ganga Agnihotri ◽  
Shilpa Kalambe ◽  
Renuka Kamdar
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Radial Distribution System ◽  
Power Loss Reduction ◽  
The Impact

This paper intends to enumerate the impact of distributed generation (DG) on distribution system in terms of active as well as reactive power loss reduction and improved voltage stability. The novelty of the method proposed in this paper is the simple and effective way of sizing and siting of DG in a distribution system by using two-port Z-bus parameters. The validity of the method is verified by comparing the results with already published methods. Comparative study presented has shown that the proposed method leads existing methods in terms of its simplicity, undemanding calculation procedures, and less computational efforts and so does the time. The method is implemented on IEEE 69-bus test radial distribution system and results show significant reduction in distribution power losses with improved voltage profile of the system. Simulation is carried out in MATLAB environment for execution of the proposed algorithm.

scholarly journals Optimal Location and Sizing of Distributed Generation in Distribution Network Using Adaptive Neuro-Fuzzy Logic Technique

2019 ◽  
Vol 4 (4) ◽  
pp. 83-89 ◽  
Author(s):  
Evans Chinemezu Ashigwuike ◽  
Stephen Adole Benson
Keyword(s):  
Fuzzy Logic ◽  
Distributed Generation ◽  
Reducing Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Optimal Position ◽  
Neuro Fuzzy ◽  
Bus Voltage ◽  
Radial Network ◽  
Fuzzy Logic Technique

The growing gap between electric power generated and that demanded is of utmost concern especially in developing economy, hence calling for measures to argument the existing power generated of which DG is a more viable aspect to explore in curtailing this challenges; although been confronted with issue of location and sizing. This research applied Adaptive neuro fuzzy logic technique to optimize DG location and size. A 24 bus radial network was used to demonstrate this process and having a suitable location and size at optimal position reduces power losses and also improves the voltage profile at the buses. The method was simulated using ANFIS toolbox MATLAB R2013b (8.2.0.701) 64-bit software and tested using Gwagwalada injection sub-station feeder 1 system. The results obtained were compared to that obtained using ANN. It was observed that adaptive neuro fuzzy logic technique performed better in terms of reducing power losses compared to ANN technique. The percentage reduction in the power loss at the buses cumulatively is 48.96% for ANN while adaptive neuro fuzzy logic technique is 49.21%. The voltage profile of the networks after optimizing the DG location and sizes using adaptive neuro fuzzy logic technique were also found to be much improved with the lowest bus voltage improved from 0.9284 to 1.05pu.

scholarly journals Mitigating the Adverse Impact of Un-Deterministic Distributed Generation on a Distribution System Considering Voltage Profile

2018 ◽  
Vol 8 (3) ◽  
pp. 2998-3003
Author(s):  
M. A. Aman ◽  
S. Ahmad ◽  
B. Noor ◽  
F. W. Karam
Keyword(s):  
Power Systems ◽  
Electric Power ◽  
Distributed Generation ◽  
Distribution System ◽  
Low Voltage ◽  
Stability Limit ◽  
Electric Power Systems ◽  
Primary Concern ◽  
Voltage Profile ◽  
Cross Sectional

Electric power systems are enforced to operate near to their stability limit due to the fast increase in power demand. Therefore, voltage stability has become a primary concern. The main cause of voltage variations is the imbalance between generation and consumption. In order to mitigate variations in voltage profile, most of the modern electric power systems are adopting new emerging technologies such as distributed generation. Validation of standard voltage optimization is a difficult task when distributed generation is integrated to medium and low voltage networks. Integration of distributed generation (DG) will have diverse impacts on voltage levels when connected un-deterministically to the electric distribution system. This paper analyzes both the impacts of un-deterministic large and small size DG on voltage profile. Feasible solutions by incorporating reactors and increasing cross sectional area of cables, variation in voltage profile were mitigated. Detailed simulations were performed in ETAP by modeling and evaluating Kohat road grid station situated in Peshawar, Pakistan. The results anticipated that this approach can be useful to ensure standard voltage profile and better utilization of un-deterministic DG units.

Sign in / Sign up

Export Citation Format

Share Document