scholarly journals Experimental and Numerical Analysis of Bubbles Distribution Influence in BubbleDeck Slab under Harmonic Load Effect

2021 ◽  
Vol 11 (1) ◽  
pp. 6645-6649
Author(s):  
A. S. Mahdi ◽  
S. D. Mohammed
Keyword(s):  
Numerical Analysis ◽  
Numerical Model ◽  
Tall Buildings ◽  
Structural Behavior ◽  
Concrete Slabs ◽  
Harmonic Load ◽  
Load Effect ◽  
Reinforced Concrete Slabs ◽  
Acceptable Agreement ◽  
Abaqus Software

Reducing a structure’s self-weight is the main goal and a major challenge for most civil constructions, especially in tall buildings and earthquake-affected buildings. One of the most adopted techniques to reduce the self-weight of concrete structures is applying voids in certain positions through the structure, just like a voided slab or BubbleDeck slab. This research aims to study, experimentally and theoretically, the structural behavior of BubbleDeck reinforced concrete slabs under the effect of harmonic load. Tow-way BubbleDeck slab of 2500mm×2500m×200mm dimensions and uniformly distributed bubbles of 120mm diameter and 160mm spacing c/c was tested experimentally under the effect of harmonic load. Numerical analysis was also performed with the ABAQUS software. The results of the adopted numerical model were in acceptable agreement with the experimental results. The numerical analysis presented by the bubbles distribution effect was carried out for the BubbleDeck two-way slab under the effect of harmonic load through the evaluated numerical model. Two cases were considered in which the distribution kept the critical positions of the slab free from the bubbles. The results proved that bubbles distribution significantly affected the structural behavior.

Numerical Simulation of Impact Response Behavior of Rectangular Reinforced Concrete Slabs under Falling-Weight Impact Loading

2011 ◽  
Vol 82 ◽  
pp. 266-271 ◽  
Author(s):  
Norimitsu Kishi ◽  
Yusuke Kurihashi ◽  
Sara Ghadimi Khasraghy ◽  
Hiroshi Mikami
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Impact Loading ◽  
Dynamic Responses ◽  
Concrete Slabs ◽  
Analysis Method ◽  
Numerical Analysis Method ◽  
Reinforced Concrete Slabs ◽  
Weight Impact ◽  
Falling Weight

A numerical analysis method for rectangular reinforced concrete slabs under falling-weight impact loading is established. The proposed method using finite element analysis incor-porates a simple constitutive model for concrete elements. The applicability was investigatedcomparing the numerical results with the experimental data. Falling-weight impact tests wereconducted on reinforced concrete slabs with different supporting conditions. These were: a slabwith line supports on four sides; a slab with two line supports on two opposite sides (the othertwo sides were free); and a slab with one line and two corner-point supports. Following resultswere obtained from this study: (1) the time histories of dynamic responses are well predictedby using proposed numerical analysis method; (2) maximum reaction forces and the maximumdeflections in the slab center below the loading point, and characteristics of the damped freevibration after falling weight was rebounded, can be better predicted; and (3) major crackpatterns can be roughly predicted despite of support conditions.

Numerical Analysis of the Influence of the Parameter of Ductility of Reinforcing Steel on the Behaviour of Narrow Three-Span Reinforced Concrete Slabs from the Point of View of Experimental Investigations

2015 ◽  
Vol 769 ◽  
pp. 133-138
Author(s):  
Mirosław Wieczorek
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Laboratory Tests ◽  
Numerical Models ◽  
Material Model ◽  
Point Of View ◽  
Experimental Investigations ◽  
Concrete Slabs ◽  
Building Structures ◽  
Reinforced Concrete Slabs

In the time of exploitation of building structures frequently situations do occur, in which due to failures they are exposed to much higher loads than originally predicted. The subject matter of the performed investigations and a numerical analysis are models of four narrow reinforced concrete slabs with the dimensions 7140×500×190 mm. The paper presents the results of the numerical analysis, the aim of which was to reflect and to provide detailed information about phenomena occurring in the course of laboratory tests. Numerical models were constructed according to the system ANSYS, applying volumetric elements SOLID65 and bars LINK8. In order to determine the relation σ-ε of steel an isotropic model of strengthening in the system ANSYS was used, constructed by Misses. The behaviour of concrete was represented by the material model Concrete. The parameters applied in the material models had been obtained in laboratory tests of the material. The paper quotes the results of calculations compared with the results obtained in laboratory tests.

Fire performance of reinforced concrete slabs: a numerical analysis

2021 ◽  
Author(s):  
Andreia Romero Fanton ◽  
Luiz Carlos de Almeida ◽  
Leandro Mouta Trautwein
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Finite Element Modelling ◽  
Concrete Slabs ◽  
Fire Performance ◽  
Membrane Action ◽  
Numerical Studies ◽  
Reinforced Concrete Slabs ◽  
Thermomechanical Behaviour ◽  
Load Carrying

<p>The emergence of tensile membrane action as a key load-carrying mechanism has increased experimental and numerical studies on the fire performance of concrete slabs since 2000, however, the different behaviour due to aggregate type is less studied in slabs numerical analysis. This paper presents a numerical analysis of the thermomechanical behaviour of reinforced concrete slabs exposed to fire, using Finite Element Modelling in ATENA and GiD. Results were validated against experimental data from the literature subjecting slabs to ISO834 and hydrocarbon time- temperature curves. 3 calibration steps were done to combine mechanical and thermal behaviours. A parametric analysis was carried out with calcareous and siliceous aggregates to provide information for safer slab design and consequent fewer accidents related to fire situation. The choice of aggregate type must always be considered in design.</p>

scholarly journals Structural Behavior of BubbleDeck Slab under Uniformly Distributed Load

2021 ◽  
Vol 7 (2) ◽  
pp. 304-319
Author(s):  
Ali Sabah Mahdi ◽  
Shatha Dehyaa Mohammed
Keyword(s):  
Compressive Strength ◽  
Load Capacity ◽  
Tall Buildings ◽  
Steel Reinforcement ◽  
The Other ◽  
Structural Behavior ◽  
Experimental Program ◽  
Reinforced Concrete Slabs ◽  
Distributed Load ◽  
Uniformly Distributed Load

In structural construction fields, reducing the overall self-weight of the structure is considered a primary objective and substantial challenge in the civil engineering field, particularly in earthquake-affected buildings and tall buildings. Different techniques were implemented to attain this goal; one of them is setting voids in a specific position through the structure, just like a voided slab or BubbleDeck slab. The main objective of this research is to study the structural behavior of BubbleDeck reinforced concrete slabs under the effect of static uniformly distributed load. The experimental program involved testing five fixed-end supported two-way solid and BubbleDeck slabs of dimensions 2500×2500×200 mm. The considered parameters included the bubble's diameter 100 and 120 mm and the concrete volume reduction 15 and 18 %. The other parameters, which are concrete compressive strength and detail of the steel reinforcement, were identical for all the tested specimens to be  for the compressive strength and (∅ 10 @164 mm) for the steel reinforcement. The outcomes indicated that the ultimate load capacity for a BubbleDeck slab decreased by 15.93 and 11.5 % compared to the solid slab in case of concrete volume reductions 18 and 15 %, respectively. On the other hand, an advanced behavior, including the ultimate deflection, the absorbed energy, and the ductility factor, was achieved; the increments in these parameters were 39, 5.3, and 14.94 %, respectively. Doi: 10.28991/cej-2021-03091655 Full Text: PDF

Sign in / Sign up

Export Citation Format

Share Document