scholarly journals Microleakage of Packable Composites Used in Post Spaces Condensed Using Different Methods

2002 ◽  
Vol 3 (2) ◽  
pp. 23-30 ◽  
Author(s):  
Güliz Görgül ◽  
A. Cemal Tinaz ◽  
Tayfun Alaçam ◽  
Bağdagül H. Kivanç ◽  
Özgür Uzun
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Root Canals ◽  
Dye Penetration ◽  
Anterior Teeth ◽  
Mechanical Hand ◽  
Dentin Bonding Agent ◽  
Etched Surface ◽  
Clinical Problems

Abstract The aim of this in vitro study was to evaluate the apical and coronal microleakage of a packable composite material compacted by either hand or ultrasonic condensers when placed in post spaces. Fortytwo extracted anterior teeth were used. After conventional obturation of the root canals, parallel post spaces 5 mm in depth and 2 mm in diameter were prepared using Gates Glidden and diamond burs. A primer and a dentin bonding agent (Prime & Bond NT) was applied to the etched surface for 30 seconds and light polymerized for 40 seconds. Surefil packable composite resin was inserted in four equal increments and each polymerized for 40 seconds. Half of the specimens were compacted with an ultrasonic tip and the other half with a mechanical hand compactor. After immersion in the dye, the teeth were sectioned longitudinally and dye penetration was evaluated using a stereomicroscope and microleakage recorded in mm. A One-Way Analysis of Variance indicated the two condensing methods were not statistically different (p>0.05). When microleakage was compared within groups, there was also no statistical difference between coronal or apical microleakage (p>0.05). In an in vitro environment, ultrasonic condensers do not offer any advantage over hand condensers. Both the coronal and apical portions of the root had microleakage indicating that regardless of the condensation method and the use of a packable composite, there is still microleakage that could potentially create further clinical problems. Citation Görgül G, Alaçam T, Kivanç BH, et. al. Microleakage of Packable Composites Used in Post Spaces Condensed Using Different Methods. J Contemp Dent Pract 2002 May;(3)2: 023-030.

scholarly journals Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study

2012 ◽  
Vol 13 (6) ◽  
pp. 830-833
Author(s):  
Romel Joseph
Keyword(s):  
In Vitro Study ◽  
Blue Dye ◽  
Control Groups ◽  
Root Canals ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Ah Plus ◽  
And Control

ABSTRACT Aim The aim of this in vitro study was to evaluate the apical seal obtained with four root canal sealers AH 26, Sealapex, Endoflas FS and AH Plus, with lateral condensation. Materials and methods Sixty root canals were prepared using the step-back technique. The specimens were divided into four experimental groups of 12 teeth and two control groups of 12 teeth. The experimental groups were obturated by laterally condensed gutta-percha with one of the tested sealers and control groups were obturated without any sealer. Methylene blue dye penetration with centrifuging method was used to evaluate the apical sealing ability. The quantitative apical leakage of each specimen was measured after 2 weeks. Results The results showed no significant differences between all groups except between AH Plus and Endoflas FS (<0.05). AH Plus showed significantly less leakage than Endoflas FS. Conclusion AH Plus showed the least leakage compared to AH 26, Sealapex and Endoflas FS. How to cite this article Joseph R, Singh S. Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study. J Contemp Dent Pract 2012;13(6):830-833.

Tensile bond strength of intracanal posts in primary anterior teeth: an in vitro study

2003 ◽  
Vol 27 (1) ◽  
pp. 35-39 ◽  
Author(s):  
Silvia Pithan ◽  
Ricardo de Sousa Vieira ◽  
Marcelo Carvalho Chain
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Vitro Study ◽  
Tensile Bond Strength ◽  
Anterior Teeth ◽  
Group I

The aim of this study was to measure in vitro; the tensile bond strength of three intracanal posts used in anterior primary teeth. A total of 45 single rooted primary anterior teeth were selected for the study and the crowns sectioned leaving 1mm above the cement-enamel junction. The roots were then assigned to three groups according the type of retention used. All roots were endodonticaly treated, a 4-mm of the canal was cleansed and a base of glass ionomer cement was put at the bottom of the prepared canal. The roots were then prepared to receive intracanal posts using a # 4137 diamond bur (KG Sorensen) used in a depth of 3-mm of the length of the canal. All the prepared roots were acid etched with a 37% phosphoric acid gel for 15 seconds, rinsed, dried and the dentin adhesive Single Bond (3M) was applied. Group I received intracanal posts and cores made of composite resin (Filtek Z 250, 3M). Group II intracanal posts were made from a 0.6mm orthodontic wire bent as a Greek letter type (gamma), fixed with the Z 250 composite resin and cores were built with the same composite. Finally Group III received intracanal retention made of a fiber glass post (Fibrekor Post, Generic/Pentron) with 1.25mm diameter, fixed with Z 250 and cores were made like the other groups. The samples were submitted to tension in a universal- testing machine (Instron, model 4444). Statistical analysis (ANOVA) reveled that there were no statistically significant differences between the groups. On the basis of the results of this in vitro study it was concluded that the type of intracanal post did not interfere with the tensile strength and the most frequent type of failure was of adhesive type, corresponding to 74% of the sample.

Effect of Calcium Hydroxide as a Root Canal Dressing Material on Dentin Fracture Strength In Primary Teeth–In Vitro Study

2018 ◽  
Vol 42 (2) ◽  
pp. 146-149
Author(s):  
Fadi Said ◽  
Moti Moskovitz
Keyword(s):  
Calcium Hydroxide ◽  
Fracture Strength ◽  
Root Canal ◽  
Primary Teeth ◽  
In Vitro Study ◽  
Vitro Study ◽  
Root Canal Treatment ◽  
Root Canals ◽  
Anterior Teeth

Objectives: The aim of the present study was to assess the effect of calcium hydroxide as a root canal dressing material on dentin microtensile fracture strength in human primary teeth in vitro. Study design: Thirty primary anterior teeth with root canals packed with calcium hydroxide were divided into groups of ten and immersed in saline at room temperature for 7, 30 and 90 days. Ten teeth with root canals filled with sterile saline were the control group. Microtensile fracture strength was measured in Mechanical tester Lloyd testing machine. Results: There was a significant difference (P &lt; 0.05) between the fracture strength of the calcium hydroxide-filled teeth after 90 days (19.1 MPa) compared with the control (35.8 MPa). Dentin microtensile fracture strength of the calcium hydroxide-filled teeth decreased at an average of 0.142 MPa per day. Conclusion: Calcium hydroxide placed in root canals for an extended time had a significantly negative effect on root strength. Long-term success of root canal treatment in primary anterior teeth is estimated as 65% with most of the failures result from trauma recurrence. Clinical Relevance: Our results stress the need to evaluate the pros and cons of root canal treatment compared to extractions of non-vital primary incisors.

scholarly journals Evaluation of the Sealing Ability of Direct versus Direct-Indirect Veneer Techniques: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Mewan Salahalddin Abdulrahman
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Human Teeth ◽  
Gingival Margin ◽  
Dye Penetration ◽  
Sealing Ability ◽  
Direct Technique ◽  
Nanohybrid Composite ◽  
The Difference

Backgrounds. Marginal discoloration, microleakage, wear, and marginal fractures are all prevalent problems with composite veneers, and this scenario leads the esthetic outcome to deteriorate with time, resulting in patient discontent. Aim of the Study. The study’s goal was to determine the marginal sealing ability of composite laminate veneers when employing two types of veneer techniques: direct and direct-indirect veneers, as well as two types of composite resin: nanohybrid and microfilled composite resin restorations, using dye penetration method. Materials and Methods. In this study, forty extracted human teeth were utilized. Following a standardized veneer preparation on the labial surface of the teeth, they were separated into two groups of 20 teeth each, using the following composite application techniques: group A: direct veneers and group B: direct-indirect veneers. Following that, each major group was separated into two subgroups of ten teeth each, based on the type of composite employed: subgroup 1 used nanohybrid composite resin, while subgroup 2 used microfilled composite resin. All of the samples were kept in distilled water, thermocycled, and soaked in 2% basic fuchsine dye. These specimens were sectioned and examined under a stereomicroscope for dye penetration at the gingival margin. The data was analyzed using independent T -tests using SPSS 22. Result. Using direct-indirect veneer technique with nanohybrid composite resin material resulted in the most negligible dye penetration at the gingival margin, while using direct veneer technique with microfilled composite resin material resulted in the maximum dye penetration. For both composite materials, gingival microleakage was lower when using the direct-indirect veneer technique than when using the direct technique, and the difference was statistically significant ( P < 0.05 ). In both techniques, gingival microleakage was lower with nanohybrid composite than with microfilled composite, and the difference was statistically highly significant ( P = 0.001 ). Conclusion. The sealing ability of the gingival margin of tooth/composite interface is better when applying direct-indirect veneer technique with nanohybrid composite resin than that of direct veneer technique with microfilled composite resin material.

scholarly journals Assessment of Morphological Changes and Permeability of Apical Dentin Surfaces Induced by Nd:YAG Laser Irradiation through Retrograde Cavity Surfaces

2004 ◽  
Vol 5 (2) ◽  
pp. 102-113 ◽  
Author(s):  
Oya Bala ◽  
Emin Türköz ◽  
Hacer Deniz Arisu ◽  
Goulnara Alimzhanova
Keyword(s):  
Laser Irradiation ◽  
Nd:Yag Laser ◽  
Morphological Changes ◽  
Root Canals ◽  
Dye Penetration ◽  
Anterior Teeth ◽  
India Ink ◽  
Group 5 ◽  
Group 2

Abstract The purpose of this in vitro study was to observe the morphological changes and apical dye penetration at apical dentin surfaces induced by Nd:YAG laser irradiation at different power settings with and without a laser initiator. Seventy five single rooted human maxillary anterior teeth were used. Following the establishment of the working lengths, the root canals were enlarged with step-back technique. The apex of each root was resected 3 mm perpendicular to its long axis. Standard Class I cavities of 2 mm depth and 2 mm width were prepared. The teeth were randomly divided into five groups with fifteen teeth in each. In Group 1, the retrograde cavity preparations were lased with Nd:YAG laser at 2 W and those in Group 2 preparations were lased with Nd:YAG laser at 3.2 W. In Group 3, the retrograde cavity surfaces were lased with Nd:YAG laser at 2 W following the application of India ink. Group 4 was lased with the same settings of Group 2 after an absorbent cotton point soaked with India ink was inserted into the cut dentinal surfaces and the inner walls of the apical preparations. Group 5 served as control. Five teeth from each group were examined using scanning electron microscopy (SEM). The amounts of smear layer, debris, and recrystalized dentin present were assessed and scored. Retrograde cavities of ten teeth from each group were filled with amalgam to examine apical dye penetration. The teeth were immersed in 2% basic fuscin and kept for 48 hours. Dye penetration was evaluated by stereomicroscope at a magnification of X10. The results showed the usage of India ink with Nd:YAG laser enhanced the amount of melting and recrystalization of dentin and the radiation and initiator increased the leakage. Citation Arisu HD, Bala O, Alimzhanova G, Türköz E. Assessment of Morphological Changes and Permeability of Apical Dentin Surfaces Induced by Nd:YAG Laser Irradiation through Retrograde Cavity Surfaces. J Contemp Dent Pract 2004 May;(5)2:102-113.

scholarly journals Influence of composite resin volume and C-factor on the polymerization shrinkage stress

2016 ◽  
Vol 19 (2) ◽  
pp. 72 ◽  
Author(s):  
Rafael Francisco Lia Mondelli ◽  
Marilia Mattar de Amoêdo Campos Velo ◽  
Rafael Simões Gonçalves ◽  
Bhenya Ottoni Tostes ◽  
Sergio Kiyoshi Ishikiriama ◽  
...  
Keyword(s):  
Composite Resin ◽  
In Vitro Study ◽  
Composite Resins ◽  
Steel Plates ◽  
Shrinkage Stress ◽  
Lower Stress ◽  
Polymerization Shrinkage ◽  
Light Curing ◽  
Clinical Problems

<p>Objective: Composite polymerization shrinkage<br />stress is an inherent process of chemical and light<br />composite resin activation. Consequently, this fact has<br />been associated to potential clinical problems. The<br />aim of the present in vitro study was to evaluate the<br />volume and C-factor influence on chemical and lightcuring<br />composite resin polymerization shrinkage<br />stress, using a non-rigid method that thereby provides<br />lower stress values, causing a minimal deflection in<br />load cell. Materials and Methods: The contraction<br />forces of the Z-250 and Concise composite resins<br />during polymerization were recorded in an UTM in<br />two experiments. In the first experiment, the Z-250<br />composite was inserted beetwen two rectangular<br />steel plates (6.0 x 2.0 mm), varyng the resin volumes<br />and C-factors, in a single increment, polymerized for<br />20 s and the forces generated were recorded for 120<br />s. In the second experiment, a pair of rectangular steel<br />plates (3x2mm) and two square steel plates (2x2mm),<br />with varied heights (2; 3 mm, respectively), were<br />used to determine the C-factor (0.6; 0.3) influence.<br />Results: The polymerized Z-250 results showed that<br />the volume variations, independent of the C-factor,<br />had a direct influence on the shrinkage stress,<br />different from the Concise, which was influenced by<br />the C-factor. Conclusion: The present study showed<br />that a higher volume of composite resins determines<br />an increase in the shrinkage stress of light-curing<br />composites.</p><p><strong>Keywords</strong></p><p>C-factor. Composite resin. Polymerization. Shrinkage<br />stress.</p>

Bond Strength Analysis of Intracanal Posts used in Anterior Primary Teeth: an in vitro study.

2007 ◽  
Vol 31 (1) ◽  
pp. 32-34 ◽  
Author(s):  
Sérgio Luiz Pinheiro ◽  
Marcelo José Strazzeri Bönecker ◽  
Danilo Antonio Duarte ◽  
José Carlos Pettorossi Imparato ◽  
Margareth Oda
Keyword(s):  
Bond Strength ◽  
Composite Resin ◽  
In Vitro Study ◽  
Pediatric Dentistry ◽  
Vitro Study ◽  
Strength Analysis ◽  
Test Machine ◽  
Anterior Teeth ◽  
Orthodontic Wire

The purpose of this in vitro study is to assess the bond strength of three different posts used to restore primary anterior teeth. These posts were made by composite resin, 0.7mm alpha-shaped orthodontic wire and dentin posts. Thirty roots of extracted primary anterior teeth, with initial physiological resorption, were mounted in a container filled with self cured resin and were endodontically treated. Thirty posts were prepared using three different materials: 10 composite resin posts (Z100), 10 alpha-shaped orthodontic wire and 10 dentin posts. A bulk of composite resin (Z100) was made over the posts using a circular Teflon bisected strip. The specimens were stored in 37°C water solution for 24 hours before tensile bond strength tests in 0,5mm/min speed were performed (Instron model 4442 test machine- Instron Corporation). The results were submitted to the Kruskal-Wallis test and there were no significant statistical differences among the three types of posts assessed (p=0.8666). The dentin posts technique might be considered an alternative for rehabilitation in pediatric dentistry. because of the possibility of natural resorption.

scholarly journals Comparison of Root End Sealing Ability of Three Retrograde Filling Materials in Teeth with Root Apices Resected at 90° using Dye Penetration Method under Fluorescent Microscope: An In-vitro Study

2021 ◽  
pp. 319-325
Author(s):  
Payal Chaudhari ◽  
Manoj Chandak ◽  
Arvind Ramdas ◽  
Patil Bhagat
Keyword(s):  
Bone Cement ◽  
In Vitro Study ◽  
Filling Material ◽  
Dye Penetration ◽  
Fluorescent Microscope ◽  
Filling Materials ◽  
Anterior Teeth ◽  
Sealing Ability ◽  
Retrograde Filling

Background: Inadequate seal at the apex is the substantial cause for surgical endodontic dissatisfaction. The retrograde filling material which is used should prevent the egress of potential contaminants into periradicular tissue. Objectives: To evaluate the ability of MTA Angelus, Zirconomer and Bioactive bone cement to seal the root end as retrograde filling material; and to compare root end sealing ability of these three different retrograde filling materials with apices resected at 900 angles using dye penetration method under fluorescent microscope. Methodology: Thirty six extracted upper anterior teeth are to be cut horizontally at the CEJ. After following the standard protocols of, “cleaning, shaping and obturation” with gutta percha and “AH Plus sealer”, the samples will be resected 3mm at the apical end at 90 degree angle along the long axis of the tooth with the help of diamond disc. A root end cavity of depth 3mm will be made with Diamond coated ultrasonic surgical tip S12 90 ND. The teeth will be randomly categorized in 3 groups: Group 1: MTA angelus; Group 2: Zirconomer; Group 3: Bioactive Bone Cement. Following which the roots to be coated with nail varnish except the tip. Each material will be compressed in the root end cavity with the help of small pluggers. All the samples which are retrofilled will be kept in acrydine orange for a duration of 24 hours, following which cleaning & bucco-lingual sectioning(vertical) will be done. Fluorescent microscope will be used for observation of sectioned root samples. Expected Results: Bioactive bone cement is expected to have better sealing ability of the retrograde cavity preparation with minimal or no microleakage followed by MTA Angelus and then Zirconomer. Conclusion: If this study proves correct, this would be helpful for the clinicians to choose better and the most efficient retrograde filling material with best sealing ability and minimal microleakage in a retrograde preparation which will aid in success of the root canal treatment further resolving the infection.

scholarly journals Relationship between the Apical Preparation Diameter and the Apical Seal: An In Vitro Study

2018 ◽  
Vol 2018 ◽  
pp. 1-5 ◽  
Author(s):  
Kaoutar Laslami ◽  
Sara Dhoum ◽  
Amine El Harchi ◽  
Iman Benkiran
Keyword(s):  
Computer Software ◽  
In Vitro Study ◽  
Negative Control ◽  
Original Position ◽  
Universal System ◽  
Root Canals ◽  
Dye Penetration ◽  
Working Length ◽  
Group 2

Objectives. The aim of the study is to define the relationship between the apical preparation diameter and the apical sealing ability to highlight the importance of the preservation of the diameter and the original position of the apical foramen. Materials and Methods. 50 extracted maxillary incisors were randomly allocated into three groups of 15 teeth each (n = 15) according to the apical preparation size: Group 1: finishing file F1 corresponding to size 20 reached the working length (ProTaper Universal system Dentsply®); Group 2: prepared up to size 30 corresponding to finishing file F30; Group 3: prepared up to size 50 corresponding to finishing file F5. Five teeth were assigned to positive and negative control groups. After the filling of the root canals, the teeth were isolated and immersed in a dye solution, then cut longitudinally, photographed, and the dye penetration were calculated using a computer software. Results. Comparison of the three different apical preparation sizes showed no statistically significant differences regarding the apical microleakage. Conclusion. The most important value of the dye penetration was observed in the group with the largest apical diameter.

Sign in / Sign up

Export Citation Format

Share Document