scholarly journals Microleakage of Class V Resin Composites using Various Self-etching Adhesives: An in vitro Study

2013 ◽  
Vol 14 (1) ◽  
pp. 51-55 ◽  
Author(s):  
PV Ravi Chandra ◽  
V Harikumar ◽  
D Ramkiran ◽  
MJN Krishna ◽  
M Veerabhadra Gouda
Keyword(s):  
Rank Test ◽  
Blue Dye ◽  
Apical Region ◽  
Resin Composites ◽  
Apical Margin ◽  
Class V ◽  
Composite Restorations ◽  
Tooth Discoloration ◽  
Self Etch

ABSTRACT Background and aims Microleakage has been identified as a significant problem with composite restorations because of interfacial gap formation which can result in tooth discoloration, recurrent caries, possible pulpal involvement and restoration replacement. Aim of this study is to evaluate the microleakage of self-etch adhesive system at the coronal and apical margins of class V resin composite restorations under stereomicroscope at 20× magnification. Materials and methods Class V cavities were prepared on the facial surfaces of 48 human premolars with coronal margins located in enamel and apical margins located in dentin. Teeth were divided into four groups: Group one—Xeno V; group two— G-Bond; group three—Clearfil S3 Bond; group four—control. After application of bonding agent and restoration, the teeth were subjected to thermocycling. The teeth were then immersed in 1% aqueous solution of methylene blue dye for 24 hours and sectioned to allow the assessment of microleakage under microscope. Results Coronal and apical margins were scored separately using a 0-3 ordinal ranking system and the recorded values were statistically analyzed using Kruskal-Wallis, Mann- Whitney U-test and Wilcoxon signed rank test. Statistical analysis showed that there was less microleakage in Xeno V at coronal region and Clearfil S3 Bond in apical region, overall Clearfil S3 Bond showed less marginal permeability in both coronal and apical regions. Conclusion Specimens restored with the Xeno V and Clearfil S3 Bond adhesive systems revealed reduced leakage at the coronal margin. At the apical margin, Xeno V showed greater leakage than the other groups, except the control. Clinical significance In class V restorations restored with composite resin, the choice of material affects the microleakage and retention of the restoration. This study theorizes that the self-etch adhesives show less microleakage in the coronal area than the apical margin. How to cite this article Chandra PVR, Harikumar V, Ramkiran D, Krishna MJN, Gouda MV. Microleakage of Class V Resin Composites using Various Self-etching Adhesives: An in vitro Study. J Contemp Dent Pract 2013;14(1):51-55.

scholarly journals Effect of Diode Laser (810 nm) Irradiation on Marginal Microleakage of Multi-mode Adhesive Resins in Class V Composite Restorations

2019 ◽  
Vol 10 (4) ◽  
pp. 275-282
Author(s):  
Niusha Golbar ◽  
Shahin Kasraei ◽  
Anahit Afrasiabi ◽  
Elahe Mostajir ◽  
Seyed Masoud Mojahedi
Keyword(s):  
Diode Laser ◽  
Resin Composite ◽  
Control Group ◽  
Blue Dye ◽  
Adhesive Systems ◽  
Universal Adhesive ◽  
Class V ◽  
Composite Restorations ◽  
Self Etch ◽  
Multi Mode

Introduction: Some studies have shown that laser irradiation on unpolymerized adhesives can improve composite-dentin adhesion. The aim of the present study was to evaluate the effect of the diode laser (810 nm) on the microleakage of multi-mode adhesive systems at enamel and dentin margins of composite restorations. Methods: Classic class V boxes were prepared on 48 sound premolar teeth and randomly divided into 6 groups (n=16). In the control groups, Scotchbond Universal (SBC), G-Premio (GBC), and Ambar U (AMC) were used by a self-etch mode. In the test groups (SBL, GBL, ABL), the 810 nm diode laser was irradiated (1 W) for 10 seconds before the polymerization of the adhesive. The boxes were restored by the resin composite. After finishing and polishing, the samples were thermocycled (5°C to 55°C) for 1000 cycles and then immersed in 0.1% methylene blue dye (48 hours). Dye penetration through the gingival and occlusal margins was measured by Stereomicroscope. The data were analyzed at the 5% significance level using Kruskal-Wallis and Mann-Whitney U tests. Results: Significant differences were found between the control and test groups (P<0.05). The occlusal margins of the SBL and GBL groups and the cervical margin of the SBL group exhibited the lowest microleakage (P<0.05). The AM control group showed maximum microleakage at cervical and occlusal margins. Conclusion: The irradiation of the 810 nm diode laser on the unpolymerized universal adhesive systems in a self-etch mode caused a significant reduction in enamel and dentin marginal microleakage of composite restorations.

scholarly journals In Vitro Comparative Evaluation of Microleakage of Newly Introduced Dyad Flow and Total and Self Etch Adhesives in Class V Resin Composite Restorations

2016 ◽  
Vol 63 (1) ◽  
pp. 15-21 ◽  
Author(s):  
Navjot S. Mann ◽  
Sameer Makkar ◽  
Reetika Sharma
Keyword(s):  
Resin Composite ◽  
Adhesive System ◽  
Ordinal Scale ◽  
Human Teeth ◽  
Class V ◽  
Flowable Composite ◽  
Composite Restorations ◽  
Group I ◽  
Self Etch

SUMMARY Introduction The aim of this study was to evaluate marginal sealing ability of newly introduced Dyad Flow flowable composite and compare to total-etch and self-etch adhesive system at the coronal and apical margins of class V resin composite restorations. Material and Methods A standard class V cavity (3 mm mesiodistal width, 3 mm occlusogingival height and 1.5 mm axial depth) was prepared on the buccal surface of freshly extracted sound human teeth. Occlusal and gingival margins of the cavities were located in enamel and cementum/dentin, respectively. Teeth were randomly assigned into the three groups (n=10) and restored with different composite materials following the manufacturer’s instructions: group I was restored with nanohybrid resin composite using total-etch bonding agent; group II was restored with nanohybrid resin composite using self-etch technique; group III was restored with flowable composite (Dyad Flow), respectively. After finishing and polishing, the teeth were coated with nail varnish and immersed in rhodamine B dye and sectioned longitudinally. Dye penetration was examined under stereomicroscope and scored separately for occlusal and gingival margins on a 0–3 ordinal scale. Data were analyzed with Kruskal–Wallis, Mann–Whitney and Wilcoxon tests (a=0.05). Result Statistical analysis showed that specimens restored with the total-etch and self-etch adhesive systems revealed reduced leakage at the coronal margin. At the apical margin, Dyad Flow showed greater leakage than other groups. Conclusion Newly introduced flowable composite Dyad Flow showed inferior adhesive bond with enamel and dentin compared to total-etch and self-etch techniques.

scholarly journals In Vitro Comparison of Microleakage of Posterior Resin Composites With and Without Liner Using Two-Step Etch-and-Rinse and Self-etch Dentin Adhesive Systems

2011 ◽  
Vol 36 (2) ◽  
pp. 213-221 ◽  
Author(s):  
S Kasraei ◽  
M Azarsina ◽  
S Majidi
Keyword(s):  
Clinical Relevance ◽  
Class Ii ◽  
Resin Composites ◽  
Adhesive Systems ◽  
Sandwich Technique ◽  
Composite Restorations ◽  
Etch And Rinse ◽  
Self Etch ◽  
In Vitro Comparison

Clinical Relevance The use of resin-modified glass ionomers as cavity liners in the closed-sandwich technique reduced microleakage in Class II composite restorations.

Marginal Leakage of Class V Composite Restorations Assessed Using Microcomputed Tomography and Scanning Electron Microscope

2015 ◽  
Vol 40 (4) ◽  
pp. 440-448 ◽  
Author(s):  
C Rengo ◽  
C Goracci ◽  
G Ametrano ◽  
N Chieffi ◽  
G Spagnuolo ◽  
...  
Keyword(s):  
Cross Sections ◽  
Microcomputed Tomography ◽  
Rank Test ◽  
Micro Ct ◽  
Cross Sectional ◽  
Class V ◽  
Composite Restorations ◽  
Significant Difference ◽  
Scanning Electron

SUMMARY Objective The aim of the study was to compare in Class V composite restorations marginal leakage measurements obtained with microcomputed tomography (micro-CT) and scanning electron microscopy (SEM) observations. Methods Class V cavities were prepared on 10 human molars and restored using Optibond FL (Kerr, Orange, CA, USA) and Premise Flowable (Kerr). Sealing ability was evaluated by assessing silver-nitrate penetration depth along enamel and dentin margins. Leakage was quantified using a scoring system. Micro-CT analysis provided 502 cross-sectional images for each tooth. Microleakage evaluation was performed first on three cross-sections corresponding to the sections examined by SEM, then on all 502 of the obtained micro-CT images. SEM observations were performed first at 20× magnification, then, if showing a zero score, at 80× magnification. Enamel and dentin microleakage scores assigned to corresponding sections through micro-CT and SEM (20×) were compared (Wilcoxon signed-rank test, α=0.05). Results No statistically significant difference in leakage scores emerged between micro-CT and 20×-magnification SEM. Eight tooth sections that were given a zero score under SEM at 20× magnification showed to be infiltrated at the higher magnification (80×). For five teeth a higher score was assigned following scanning of 502 cross-sections than based on the observation of three sections. Conclusions Micro-CT presents as a valid, nondestructive in vitro method to quantitatively evaluate marginal leakage of adhesive restorations.

scholarly journals Marginal microleakage of class V resin-based composite restorations bonded with six one-step self-etch systems

2013 ◽  
Vol 27 (3) ◽  
pp. 225-230 ◽  
Author(s):  
Alfonso Sánchez-Ayala ◽  
Arcelino Farias-Neto ◽  
Larissa Soares Reis Vilanova ◽  
João Carlos Gomes ◽  
Osnara Maria Mongruel Gomes
Keyword(s):  
Class V ◽  
Composite Restorations ◽  
One Step ◽  
Self Etch

scholarly journals Microleakage Evaluation in Class V Cavities Restored with Five Different Resin Composites: In vitro Dye Leakage Study

2021 ◽  
Vol Volume 13 ◽  
pp. 405-411
Author(s):  
Sahar Bajabaa ◽  
Shaza Balbaid ◽  
Muruj Taleb ◽  
Lujain Islam ◽  
Salem Elharazeen ◽  
...  
Keyword(s):  
Resin Composites ◽  
Class V

scholarly journals Adhesion to Enamel of Teeth Affected by Molar Incisor Hypomineralization: Literature Review

2018 ◽  
Vol 22 (2) ◽  
pp. 57-63
Author(s):  
Apostolina Theocharidou ◽  
Konstantinos Arapostathis
Keyword(s):  
Adhesive System ◽  
In Vitro Studies ◽  
Treatment Modalities ◽  
Tooth Structure ◽  
Resin Infiltration ◽  
Composite Restorations ◽  
Molar Incisor Hypomineralization ◽  
Self Etch

SummaryBackground/Aim: Molar incisor hypomineralization (MIH) is a qualitative defect of systemic origin, affecting permanent first molars and often permanent incisors. The treatment modalities can include, amongst others, fissure sealants for prevention of dental caries and composite restorations. Both require adhesion to tooth structure. The aim of this study was to review the literature on the adhesion to enamel affected by MIH.Material and Methods: A search of PupMed/Medline, ResearchGate and Google Scholar was performed and limited between 2003, when the judgement criteria for MIH were set, and 2016. Thirty-three papers were considered relevant to the subject including five in vivo and six in vitro studies. Studies involving less than ten teeth were excluded.Results: A four-year clinical trial showed that the application of a total-etch 2-step adhesive system prior to sealant placement is superior to the etch-seal technique. Despite the high success rate of composite restorations shown in three clinical longitudinal studies, there are conflicting results over self-etch being superior to total etch adhesive systems. Pretreating the enamel surface, prior to the adhesive system, with fluoride preventive solutions could reduce the mikroleakage under orthodontic brackets. Three in vitro studies provide inconsistent data about NaOCl pretreating potentials to improve adhesion of composite restorations. Resin infiltration, prior to resin restorations, could improve the microhardness of defected enamel, which may lead to increased bond strength, especially in combination with NaOCl pretreatment.Conclusions: Adhesion to enamel affected by molar incisor hypomeralization is inferior compared to normal enamel. Sealants applied with the etch-bond-seal technique have greater retention than with the etch-seal technique. Further research is required to provide evidence of the effectiveness of the adhesive system and pretreatment to achieve optimal bonding to MIH.

scholarly journals Marginal Permeability of Self-etch and Total-etch Adhesive Systems

2006 ◽  
Vol 31 (1) ◽  
pp. 60-67 ◽  
Author(s):  
B. M. Owens ◽  
W. W. Johnson ◽  
E. F. Harris
Keyword(s):  
Clinical Relevance ◽  
Resin Composite ◽  
Adhesive Systems ◽  
Class V ◽  
Strict Adherence ◽  
Dentin Surface ◽  
Composite Restorations ◽  
Surface Anatomy ◽  
Self Etch

Clinical Relevance Decreased leakage was associated with Adper Scotchbond Multi-Purpose (total etch) and iBond (self-etch) systems in Class V resin composite restorations. All adhesive systems performed best when bonded to enamel compared to dentin surface anatomy. Clinicians should be aware that strict adherence to manufacturer instructions, when using these materials, is of primary importance.

scholarly journals Microleakage at enamel and dentin margins with a bulk fills flowable resin

2014 ◽  
Vol 08 (01) ◽  
pp. 001-008 ◽  
Author(s):  
Nicola Scotti ◽  
Allegra Comba ◽  
Alberto Gambino ◽  
Davide Salvatore Paolino ◽  
Mario Alovisi ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Resin Composite ◽  
In Vitro Study ◽  
Artificial Ageing ◽  
Resin Composites ◽  
Class V ◽  
Dye Penetration ◽  
Before And After ◽  
Blue Solution

ABSTRACT Objective: The aim of this in vitro study was to evaluate the marginal sealing ability of a bulk fill flowable resin composite on both enamel and dentin substrates. Materials and Methods: 48 non-carious molars were selected and four Class-V cavities were prepared at the CEJ of each sample. Cavities were filled with Venus Diamond (Heraeus Kulzer); Venus Diamond Flow (Heraeus Kulzer) and Surefil SDR (Dentsply). Samples were divided into two groups: First group samples were immersed in a methylene blue solution for 30 min at 25°C. Second group samples were artificially aged and then treated with methylene blue. Samples were sectioned in the center of the restoration and observed with a 40x stereomicroscope, and the percentage of cavity infiltration was calculated. Results: Results were analyzed statistically by ANOVA (P < 0.05). The amount of infiltration was significantly lower for the enamel substrate compared with dentin (P = 0.0001) and in samples immediately immersed in methylene blue compared with those that were artificially aged (P = 0.011). The interaction between the composite material and the marginal substrate significantly affected dye penetration (P = 0.006). Conclusions: Bulk fill flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins. Bulk fills flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins.

Sign in / Sign up

Export Citation Format

Share Document