scholarly journals Comparative study: Impact of Ball burnishing and shot peening Process on Aluminium 2024 alloy

2021 ◽  
Vol 23 (08) ◽  
pp. 1768-1775
Author(s):  
◽  
Mahendra Kumara C ◽  
D. Shivalingappa ◽  
Prema. S ◽  
◽  
...  
Keyword(s):  
Residual Stress ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Fluid Pressure ◽  
Ball Burnishing ◽  
Hydraulic Unit ◽  
2024 Alloy ◽  
Burnishing Process ◽  
Aeroengine Components ◽  
Compressive Residual Stresses

Compressive residual stress is the major aspect in the extension of the fatigue life of aeroengine components. In this study, a modified burnishing surface treatment and conventional shot peening process was used was proposed to improve surface integrity characteristics such as surface finish, hardness, and stable, advantageous compressive residual stress in turned Cylindrical Aluminum 2024Specimen. In burnishing process, a rolling rigid spherical HSS ball is pressed across an Aluminum 2024Specimen under definite fluid pressure generated by the hydraulic unit and also shot peening was carried out at a shot velocity of 300 m/s. This research examined the effect of burnishing treatment and shot peening process on beneficial compressive residual stresses.

Microscale Modeling to Study Shot Peening Effects on Aluminum Alloy

2016 ◽  
Author(s):  
H. Bae ◽  
M. Ramulu ◽  
A. Hossain
Keyword(s):  
Residual Stress ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Single Shot ◽  
Impact Model ◽  
Multiple Impacts ◽  
Residual Stress Field ◽  
Multiple Impact ◽  
Microscale Modeling ◽  
Compressive Residual Stresses

Shot peening is a cold working process used to produce a compressive residual stress to modify mechanical properties of metals. It causes impacting a surface with shots with significant force to create plastic deformation. The compressive residual stresses developed by shot peening process helps to avoid the propagation of micro-cracks exist in surface. Shot peening process is often used in aircraft industries to relieve tensile stresses built up in the grinding process, and replace them with beneficial compressive residual stresses. Shot peening has been developed to increase the fatigue strength of metallic parts. Compressive residual stress and surface hardening induced by shot peening process are found beneficial to increase the fatigue life and the resistance to stress corrosion cracking within the metallic component. Even though shot peening has been used for more than 50 years, a review of published papers indicates a lack of studies in numerical modeling. In particular, the effect of complex shot peening process to predict the target material responds to the multiple impacts of shots is not fully revealed. Most studies have investigated the fundamental mechanism and characteristics of fatigue improvement by single shot peening, and have studied the compressive residual stress induced by single normal impact on the surface of the specimen. However, single impact model is appropriate and efficient for sensitivity studies, local plastic effect, and indentation estimation. It is well known that the residual stress by single shot model is not suitable for practical use. The residual stress field from multi impacts is the resultant sum of all the fields by repeated and progressive impacts. It is not feasible to extrapolate results from the single impact model to a practical shot peening process with multiple impacts. Therefore, this research attempts to conduct a microscale modeling to study the shot peening effects of aluminum alloy responds to single and multiple impacts. First, a single shot impact model, representing single shot peening process, has been developed for the estimation of indentations at different velocities. The numerical simulations has been performed with the finite element software code LS-DYNA. The validations of the numerical simulations has been made from experimentally measured surface roughness data. Once the finite element code of single shot peening model is validated, additional numerical models are developed to simulate multiple shot peening process, using multiple impact shots. The multiple impact model are developed for the estimation of the residual stress field.

Improvement of Inner Surface for Machine Parts by Shot Peening

2004 ◽  
Vol 449-452 ◽  
pp. 345-348
Author(s):  
Y. Harada ◽  
Seijiro Maki ◽  
Kazuya Mori ◽  
Lei Wang
Keyword(s):  
Residual Stress ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Collision Energy ◽  
Processing Conditions ◽  
Test Pieces ◽  
Coiled Spring ◽  
Inner Surface ◽  
Machine Parts ◽  
Compressive Residual Stresses

Shot peening process of inner surface of machine parts in which rebound shots collide with the inner surface was investigated. The jig used for rebound shot peening has the surface with a slope to the inner surface of machine parts, and the collision direction of shots was vertical to the inner surface. In this process, a compressed air type shot peening machine was employed. The influence of processing conditions was evaluated by the distributions of hardness, residual stress and surface roughness in the test pieces of pipes and coiled springs. The effect of shot peening increases with the increase of shots collision energy. A stress peening process for inner surface of coiled springs using rebound shots was also performed. The coiled spring was provided higher compressive residual stresses. The results of a fatigue test showed that the fatigue life of the spring was improved. The compressive residual stress reduces the tensile stress of coiled spring. It was found that the present process was suitable for improving the inner surface of machine parts.

Surface Modification Analysis after Shot Peening of AA 7075 in Different States

2013 ◽  
Vol 768-769 ◽  
pp. 519-525 ◽  
Author(s):  
Sebastjan Žagar ◽  
Janez Grum
Keyword(s):  
Residual Stress ◽  
Surface Layer ◽  
Residual Stresses ◽  
Aluminium Alloy ◽  
Shot Peening ◽  
Fatigue Testing ◽  
Stress Profile ◽  
Treatment Conditions ◽  
Stress Profiles ◽  
Compressive Residual Stresses

The paper deals with the effect of different shot peening (SP) treatment conditions on the ENAW 7075-T651 aluminium alloy. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. The objective of the research was to establish the optimal parameters of the shot peening treatment of the aluminium alloy in different precipitation hardened states with regard to residual stress profiles in dynamic loading. Main deformations and main residual stresses were calculated on the basis of electrical resistance. The resulting residual stress profiles reveal that stresses throughout the thin surface layer of all shot peened specimens are of compressive nature. The differences can be observed in the depth of shot peening and the profile of compressive residual stresses. Under all treatment conditions, the obtained maximum value of compressive residual stress ranges between -200 MPa and -300 MPa at a depth between 250 μm and 300 μm. Comparison of different temperature-hardened aluminium alloys shows that changes in the Almen intensity values have greater effect than coverage in the depth and profile of compressive residual stresses. Positive stress ratio of R=0.1 was selected. Wöhler curves were determined in the areas of maximum bending loads between 30 - 65 % of material's tensile strength, measured at thinner cross-sections of individual specimens. The results of material fatigue testing differ from the level of shot peening on the surface layer.

scholarly journals Stress Relaxation Behavior of Cavitation-Processed Cr–Mo Steel and Ni–Cr–Mo Steel

2019 ◽  
Vol 9 (2) ◽  
pp. 299
Author(s):  
Kumiko Tanaka ◽  
Daichi Shimonishi ◽  
Daisuke Nakagawa ◽  
Masataka Ijiri ◽  
Toshihiko Yoshimura
Keyword(s):  
Residual Stress ◽  
Stress Relaxation ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
High Pressures ◽  
Relaxation Behavior ◽  
Material Surface ◽  
Stress Relaxation Behavior ◽  
Gas Atmosphere ◽  
New Processing

Cr–Mo steel and Ni–Cr–Mo steel have higher strength and hardness than carbon steel, and they are occasionally used in harsh environments where high temperatures and high pressures are simultaneously applied in an oxidizing gas atmosphere. In general, in order to improve the fatigue strength of a material, it is important to impart compressive residual stress to the material surface to improve crack resistance and corrosion resistance. Conventionally, the most famous technique for imparting compressive residual stress by surface modification of a material is shot peening processing. However, in shot peening processing, there is concern that particles adhere to the surface of the material or the surface of the material becomes rough. Therefore, in this study high temperature and high-pressure cavitation was applied and the material surface was processed at the time of collapse. A theoretical and experimental study on a new processing method giving compressive residual stress was carried out. In the present study, we will report stress relaxation behavior due to the heat of cavitation in processed Cr–Mo steel and Ni–Cr–Mo steel.

Effect of Microshot Peening on Surface Characteristics of Spring Steel

2010 ◽  
Vol 654-656 ◽  
pp. 374-377
Author(s):  
Yasunori Harada ◽  
Koji Yoshida
Keyword(s):  
Residual Stress ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Cast Steel ◽  
High Hardness ◽  
Surface Characteristics ◽  
Spring Steel ◽  
Cemented Carbide ◽  
High Carbon ◽  
New Type

Shot peening is a surface treatment that improves the performance of engineering components. In conventional shot peening, the medium consists of small spheres, which are usually made of high-carbon cast steel; the diameter of the spheres is in the range from 0.3 to 1.2mm. More recently, however, a new type of microshot has been developed to enhance the peening effect. The diameter of the spheres in the new medium is in the range from 0.02 to 0.15mm. In the present study, the effect of microshot peening on the surface characteristics of spring steel was investigated. The injection method of the microshot was of the compressed air type. The microshots of 0.1mm diameter were high-carbon cast steel and cemented carbide, and the workpiece used was the commercially spring steel JIS-SUP10. The surface roughness, hardness and compressive residual stress of the peened workpieces were measured. The surface layer of the workpieces was sufficiently deformed by microshot peening. A high hardness or residual stress was observed near the surface. The use of hard microshots such as cemented carbide was found to cause a significantly enhanced peening effect for spring steel.

A Study on the Fatigue Characteristics of Al6061-T651 by Shot Peening Velocity

2006 ◽  
Vol 326-328 ◽  
pp. 1093-1096 ◽  
Author(s):  
Won Jo Park ◽  
Sun Chul Huh ◽  
Sung Ho Park
Keyword(s):  
Residual Stress ◽  
Surface Roughness ◽  
Fatigue Life ◽  
Shot Peening ◽  
High Speed ◽  
Compressive Residual Stress ◽  
Velocity Increase ◽  
Fatigue Characteristics ◽  
Height Increase ◽  
Small Steel

Small steel ball is utilized in Shot peening process. Called “shot ball” are shot in high speed on the surface of metal. When the shot ball hit the surface, it makes plastic deformation and bounce off, that increase the fatigue life by compressive residual stress on surface. In this study, the results of observation on the tensile strength, hardness, surface roughness, compressive residual stress and fatigue life of a shot peened Al6061-T651 were obtained. Experimental results show that arc height increase tremendously by shot velocity. Also, it shows that surface roughness, hardness, compressive residual stress and fatigue life increase as shot velocity increase.

Coupled finite and discrete element shot peening simulation based on Johnson–Cook material model

2020 ◽  
Vol 234 (7) ◽  
pp. 974-987
Author(s):  
Abdulrahaman Shuaibu Ahmad ◽  
Yunxin Wu ◽  
Hai Gong
Keyword(s):  
Residual Stress ◽  
Shot Peening ◽  
Compressive Residual Stress ◽  
Material Model ◽  
Discrete Element ◽  
Target Interaction ◽  
Simulation Based ◽  
Numerical Tools ◽  
Discrete Element Methods ◽  
The Cost

Shot peening is an essential treatment that produces a beneficial compressive layer on the material’s surface, which significantly improves its fatigue life. To minimizes the cost and resources used in determining the finest shot peening parameters based on the experimental approach, a numerical model capable of computing the induced compressive residual stress accurately is required. Hence, the numerical simulation of the shot peening process with multiple random shots that depict the actual shot peening is presented in this paper. The model is developed using the coupled finite and discrete element methods. The two numerical tools were coupled via code in ABAQUS, whereby shot–shot and shot–target interaction behaviors were accurately included. The induced compressive residual stress was computed due to the multiple random shots impact based on the Johnson–Cook material model. The model was experimentally validated and applied to evaluated the influence of shot velocity, shot size, and angle of impact on the final compressive residual stress.

Numerical Simulation of Residual Stresses Induced from Shot Peening with Finite Element Method

2013 ◽  
Vol 433-435 ◽  
pp. 1898-1901
Author(s):  
Li Juan Cao ◽  
Shou Ju Li ◽  
Zi Chang Shangguan
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Residual Stress ◽  
Surface Layer ◽  
Residual Stresses ◽  
Shot Peening ◽  
Target Material ◽  
Residual Stress Field ◽  
State Of Stress ◽  
Compressive Residual Stresses

Shot peening is a manufacturing process intended to give components the final shape and to introduce a compressive residual state of stress inside the material in order to increase fatigue life. The modeling and simulation of the residual stress field resulting from the shot peening process are proposed. The behaviour of the peened target material is supposed to be elastic plastic with bilinear characteristics. The results demonstrated the surface layer affected by compressive residual stresses is very thin and the peak is located on the surface.

Sign in / Sign up

Export Citation Format

Share Document