Development of a crash simulation method for long-fiber-reinforced thermoplastic (LFT) components based on fiber orientation from mold-filling simulation

2016 ◽  
pp. 131-158
Author(s):  
L. Schulenberg ◽  
J. Lienhard ◽  
D. Niedziela ◽  
I. Shklyar ◽  
K. Steiner ◽  
...  
Keyword(s):  
Fiber Orientation ◽  
Simulation Method ◽  
Mold Filling ◽  
Fiber Reinforced ◽  
Crash Simulation ◽  
Filling Simulation

scholarly journals Modeling of Bridging Law for Bundled Aramid Fiber-Reinforced Cementitious Composite and its Adaptability in Crack Width Evaluation

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 179
Author(s):  
Daiki Sunaga ◽  
Takumi Koba ◽  
Toshiyuki Kanakubo
Keyword(s):  
Fiber Orientation ◽  
Crack Width ◽  
Volume Fraction ◽  
Characteristic Point ◽  
Crack Opening ◽  
Aramid Fiber ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Cross Sectional ◽  
Bridging Law

Tensile performance of fiber-reinforced cementitious composite (FRCC) after first cracking is characterized by fiber-bridging stress–crack width relationships called bridging law. The bridging law can be calculated by an integral calculus of forces carried by individual fibers, considering the fiber orientation. The objective of this study was to propose a simplified model of bridging law for bundled aramid fiber, considering fiber orientation for the practical use. By using the pullout characteristic of bundled aramid fiber obtained in the previous study, the bridging laws were calculated for various cases of fiber orientation. The calculated results were expressed by a bilinear model, and each characteristic point is expressed by the function of fiber-orientation intensity. After that, uniaxial tension tests of steel reinforced aramid-FRCC prism specimens were conducted to obtain the crack-opening behavior and confirm the adaptability of the modeled bridging laws in crack-width evaluation. The experimental parameters are cross-sectional dimensions of specimens and volume fraction of fiber. The test results are compared with the theoretical curves calculated by using the modeled bridging law and show good agreements in each parameter.

scholarly journals Warpage Reduction of Glass Fiber Reinforced Plastic Using Microcellular Foaming Process Applied Injection Molding

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 360 ◽  
Author(s):  
Hyun Kim ◽  
Joo Sohn ◽  
Youngjae Ryu ◽  
Shin Kim ◽  
Sung Cha
Keyword(s):  
Injection Molding ◽  
Glass Fiber ◽  
Fiber Orientation ◽  
Mechanical And Thermal Properties ◽  
Micro Ct ◽  
Fiber Reinforced ◽  
Foaming Process ◽  
Microcellular Foaming ◽  
Glass Fiber Reinforced ◽  
The Impact

This study analyzes the fundamental principles and characteristics of the microcellular foaming process (MCP) to minimize warpage in glass fiber reinforced polymer (GFRP), which is typically worse than that of a solid polymer. In order to confirm the tendency for warpage and the improvement of this phenomenon according to the glass fiber content (GFC), two factors associated with the reduction of the shrinkage difference and the non-directionalized fiber orientation were set as variables. The shrinkage was measured in the flow direction and transverse direction, and it was confirmed that the shrinkage difference between these two directions is the cause of warpage of GFRP specimens. In addition, by applying the MCP to injection molding, it was confirmed that warpage was improved by reducing the shrinkage difference. To further confirm these results, the effects of cell formation on shrinkage and fiber orientation were investigated using scanning electron microscopy, micro-CT observation, and cell morphology analysis. The micro-CT observations revealed that the fiber orientation was non-directional for the MCP. Moreover, it was determined that the mechanical and thermal properties were improved, based on measurements of the impact strength, tensile strength, flexural strength, and deflection temperature for the MCP.

Mold Filling of Long-Fiber Reinforced RIM Materials

1989 ◽  
Vol 25 (5) ◽  
pp. 409-420 ◽  
Author(s):  
M. Begemann ◽  
G. Menges ◽  
W. Michaeli
Keyword(s):  
Mold Filling ◽  
Fiber Reinforced

Effect of Fiber Orientation on the Tensile Strength in Fiber-Reinforced Polymeric Composite Materials

2005 ◽  
Vol 297-300 ◽  
pp. 2897-2902 ◽  
Author(s):  
Jin Woo Kim ◽  
Jung Ju Lee ◽  
Dong Gi Lee
Keyword(s):  
Tensile Strength ◽  
Composite Material ◽  
Fiber Orientation ◽  
Polymeric Composite ◽  
Orientation Distribution ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Composite Sheet ◽  
Content Ratio ◽  
Fiber Orientation Distribution

The study for strength calculation of one way fiber-reinforced composites and the study measuring precisely fiber orientation distribution were presented. However, because the DB that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed, we need the systematic study for that. Therefore, in this study, we investigated what effect the fiber content ratio and fiber orientation distribution have on the strength of composite sheet after making fiber reinforced polymeric composite sheet by changing fiber orientation distribution with the fiber content ratio. The result of this study will become a guide to design data of the most suitable parts design or fiber reinforced polymeric composite sheet that uses the fiber reinforced polymeric composite sheet in industry spot, because it was conducted in terms of developing products. We studied the effect the fiber orientation distribution has on tensile strength of fiber reinforced polymeric composite material and achieved this results below. We can say that the increasing range of the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation is getting wider as the fiber content ratio increases. It shows that the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation 90° is similar with the value of polypropylene’s intensity when fiber orientation function is J= 0.7, regardless of the fiber content ratio. Tensile strength of fiber reinforced polymeric composite is affected by the fiber orientation distribution more than by the fiber content ratio.

Sign in / Sign up

Export Citation Format

Share Document