scholarly journals SOLID WASTE MANAGEMENT IN THE MUNICIPAL MARKET OF CAUCAIA, CEARÁ

Since Brazil is one of the countries which generate more waste in the world and that organic waste represents more than half of this amount, this article aimed to evaluate the life cycle of solid waste in the City Market of Caucaia / CE, carrying out a study with a qualitative and quantitative approach, a descriptive nature and a bibliographic and documentary basis. Using two questionnaires, workes were interviewed, totaling 10 individuals. These individuals were asked about the generation, collection and destination of the waste produced. To understand the management of waste produced in the market, it was decided to interview the city hall technician responsible for the area. Most marketers deposit their waste in the open, do not know the final destination or ways of treating this waste and do not have access to selective collection. More than half of the waste produced has organic origin, however, there are wastes that need specific destination, such as batteries and electronics. Waste management is not very efficient and the city has no strategies. The results obtained show that the management and management of waste from Caucaia / CE still need to undergo some changes, mainly in relation to the destination and treatment of these, especially organic ones.

2019 ◽  
Vol 11 (22) ◽  
pp. 6305
Author(s):  
Francisco Gutiérrez Galicia ◽  
Ana Lilia Coria Páez ◽  
Ricardo Tejeida Padilla

Mexico City generates 12 thousand tons of Municipal Solid Waste (MSW) per day, which places it as one of the cities that produces the most MSW in the world. However, the treatments used in the city are not enough for recycling materials and organics valorization of at least 45% of the MSW, which is the minimum for a medium-high-income city. To put in a global context the deficiency in Municipal Solid Waste Management (MSWM) in Mexico City and evaluate the policies that have been implemented thus far, Wasteaware benchmark Indicators for Integrated Sustainable Waste Management (ISWM) were used to obtain a desired profile for the comprehensive MSWM in Mexico City. The Wasteaware Benchmark Indicators have been tested in more than 50 cities around the world. The results showed that in Mexico City, certain aspects of governance present the most considerable delay and, at the same time, that there are certain areas of opportunity to improve the efficiency of MSWM in its physical aspects, such as collection systems or treatment services.


2020 ◽  
Vol 3 (2) ◽  
pp. 153-154
Author(s):  
Joedcel M. Go ◽  
Merlita V. Caelian

The present alarming environmental world crisis is the uncontrolled generation and illegal dumping of solid waste (SW) that poses great harm to public health and the environment (Ali & Sion, 2014). Poor waste management may cause air, water, and soil contamination. The Republic Act 9003 (RA 9003) or the Ecological Solid Waste Management Act (ESWMA) had been in place for several years. However, its implementation was a challenge for every LGU, including in a highly urbanized city. Hence, the paper examined the level of implementation of the provisions and enforcement of prohibited acts on ESWMA of barangays as assessed by community leaders as a whole and according to their geographical location and income. Also, it explores the challenges encountered by the barangays and the recommendations of the community leaders in the implementation of RA 9003 and the local ordinance enacted by the city.


2020 ◽  
Author(s):  
Rakibul Ahasan

Generation of solid waste (SW) is a major problem in urban areas, thus its management is one of the important obligatory functions to not only urban local authority but also for the inhabitants. The citizens expressed their concerns about the waste management system in KCC and associated problems that they are encountering. Waste generation in Khulna City Corporation is around 455 tons of municipal solid waste/day and generation rate is now 0.75 Kg/capita/day on an average. Existing public utility services and facilities are not adequate to meet the demand of disposing these massive amounts of wastes and that’s why several problems are arising. There are some deterrents in the KCC’s solid waste Management system, arising from both the city corporation authority and the citizen of different levels. With a view to address the problem from through community participation, this paper intends to evaluate the potential of community based solid waste management approach in context of Khulna city.


2018 ◽  
Vol 29 (6) ◽  
pp. 1075-1092
Author(s):  
Bupe Getrude Mwanza ◽  
Charles Mbohwa ◽  
Arnesh Telukdarie

Purpose The purpose of this paper is to review the present municipal solid wastes (MSWs) management system, from an engineering management (EM) perspective, for the City of Kitwe while proposing a levers-driven sustainable municipal solid waste management (MSWM) model focussing on improving waste management (WM). Design/methodology/approach The research work involves four stages. First, a comprehensive review of literature is conducted on MSWM. Second, structured interviews are conducted with key experts in solid waste management in the City of Kitwe in order to enhance the knowledge inputs. Third, direct observations and an interview with a WM driver are conducted in order to understand; the collection, disposal and treatment options for MSWs. Lastly, a sustainable model for managing MSWs is proposed Findings The research findings indicate that the existing MSW system for the city is highly unsustainable and lacks EM methodologies. There are still a number of challenges in the management of MSWs which include: lack of proper collection and storage of MSWs; lack of an engineered landfill; lack of waste recovery and treatment systems; and lack of public education aimed at reducing and separating MSWs. Practical implications A correct and detailed database for waste generation, collection, treatment and disposal is needed for the City of Kitwe. The system is necessary for WM resources allocation as well as for planning sustainable WM projects. The proposed model has been developed based on the actual observations, data collection and analysis. Originality/value The research identifies a gap in the management of MSWs for the City of Kitwe. This work is original as no similar MSW model has been proposed globally and specific for a developing economy such as Africa.


Author(s):  
Jaison Chatsiwa ◽  
Never Mujere ◽  
Avhatendi Bethania Maiyana

The rapid increase in urban population has resulted in poor environmental conditions in urban and peri-urban settlements. In most developing countries, the problem of inefficient municipal solid waste management (MSWM) is endemic. The problem manifests in heaps of uncollected solid waste or ubiquitous illegal dumps on open areas and by the street sides. This paper examines issues of solid waste management practices in the City of Kwekwe in Zimbabwe. It highlights types of waste, its generation, transfer and disposal. A mixed methodological approach including field observations, structured questionnaire survey and face-to-face interviews were employed in the gathering of data for the study. The key findings established to be the factors affecting effective solid waste management in the City are irregular solid waste collection, inadequate operational funding, inappropriate technologies, inadequate staffing, lack of knowledge cooperation and knowledge on the part of the residents. Based on the research findings, principles of environmental stewardship need to be promoted in the City.


2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Mohamad Noufal ◽  
Liu Yuanyuan ◽  
Zena Maalla ◽  
Sylvia Adipah

The absence of accurate information on the state of waste is a challenge to the solid waste management system in Syria. The local authorities commonly estimate the quantity of waste produced and its characterisation, which is the starting point for solid waste management planning. So, this paper aims to evaluate the generation and composition of household solid waste in Homs city, Syria. Also, the study presents factors influencing the waste generation rate and the waste composition. The study was carried out in 300 families from four zones in Homs city, and three sampling stages were conducted during the study duration, which started in July 2017 and ended in February 2019. The outcomes show that an average of 0.68 kg/per/day solid waste generated was calculated for the entire study area in Homs city. Also, the data analysis presents that organic waste constitutes the largest component in the waste mixture (69.1%) followed by plastic (10.6%), inert materials (8.7%), paper (4.6%), textile (2.5%), metal (1.2%), glass (1.1%), wood (0.6%), and hazardous materials (1.6%). The multiple linear regression results showed that the adjusted R2 value was found to be 0.557, 0.839, and 0.709 for the waste generation per capita, the daily household organic waste generation, and the daily household packaging waste generation, respectively. Also, according to Pearson’s coefficient values, a positive correlation was found between household waste generation and monthly income (r = 0.626), household size (r = 0.37), and age of the household head (r = 0.517), whereas a negative correlation was found between household waste generation and the education level of the household head (r = −0.649).


2020 ◽  
Vol 16 (6) ◽  
pp. 917-948
Author(s):  
Kapil Dev Sharma ◽  
Siddharth Jain

Purpose Due to the increasing population and prosperity, the generation rate of municipal solid waste (MSW) has increased significantly, resulting in serious problems on public health and the environment. Every single person in the world is affected by the municipal solid waste management (MSWM) issue. MSWM is reaching a critical level in almost all areas of the world and seeking the development of MSW strategies for a sustainable environment. This paper aims to present the existing global status of MSW generation, composition, management and related problems. Design/methodology/approach A total of 59 developed and developing countries have been grouped based on their gross national income to compare the status of various MSWM technologies among them. A total of 19 selection criteria have been discussed to select appropriate MSWM technology(s) for a city/town, which affects their applicability, operational suitability and performance. All risks and challenges arising during the life cycle of the waste to energy (WtE) project have also been discussed. This paper also gives a comparative overview of different globally accepted MSWM technologies and the present market growth of all WtE technologies. Findings It was found that most developed countries have effectively implemented the solid waste management (SWM) hierarchy and are now focusing heavily on reducing, reusing and recycling of MSW. On the other hand, SWM has become very serious in low-income and low-middle-income countries because most of the MSW openly dumps and most countries are dependent on inadequate waste infrastructure and the informal sector. There are also some other major challenges related to effective waste policies, availability of funds, appropriate technology selection and adequacy of trained people. This study clears the picture of MSW generation, composition, management strategies and policies at the worldwide context. This manuscript could be valuable for all nations around the world where effective MSWM has not yet been implemented. Originality/value This study clears the picture of solid waste generation, composition, management strategies and policies at the worldwide context. This manuscript could be valuable for all nations around the world where effective MSWM has not yet been implemented. In this study, no data was generated. All supporting data were obtained from previously published papers in journals, the outcomes of the international conferences and published reports by government organizations.


Sign in / Sign up

Export Citation Format

Share Document