scholarly journals Effects of crossbreeding Hungarian Merino sheep with Suffolk and Ile de France on carcass traits

2009 ◽  
Vol 52 (2) ◽  
pp. 169-176
Author(s):  
F. Pajor ◽  
E. Láczó ◽  
O. Erdős ◽  
P. Póti
Keyword(s):  
Carcass Traits ◽  
Live Weight ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Merino Sheep ◽  
Fattening Performance ◽  
Percentage Weight ◽  
Dressing Percentage ◽  
And Gender ◽  
Carcass Cuts

Abstract. In this examination, Hungarian Merino (ram n=30, ewe n=30), Hungarian Merino × Ile de France F1, and Hungarian Merino × Suffolk F1 (ram n=15, ewe n=15) lambs were used to evaluate the effect of crossbreeding on carcass characteristics and composition. We examined fattening performances and the following carcass traits: dressing percentage, weight of valuable carcass cuts, percentage of valuable meat, bone to meat ratio, and as well as meat conformation and fat cover (S/EUROP grading). In the present investigation, the weight at slaughter was fixed between 31–32 kg approximately, thus ensuring, weight would not affect carcass composition. Standardizing carcass weight allowed us to spot differences due to genotype and gender. The best results of fattening performance showed the Hungarian Merino × Ile de France F1 lambs (358 g/day). The tested crossed genotypes had not greatly influence dressing percentage and warm carcass weight, but the best percentage valuable carcass cuts had Hungarian Merino × Suffolk F1 (83.37 %). The best percentage of valuable meat presented (77.76 %) the Hungarian Merino × Ile de France F1 lambs. The best meat conformation and fat covered showed the Hungarian Merino × Suffolk F1 lambs. Hungarian Merinos showed less favourable results. To the summarising, the Suffolk and Ile de France improved the Hungarian Merino’s fattening performance, slaughter value and ability of market over 30 kg live weight, therefore there were both breeds suggest with crossing.

scholarly journals Examination of Fattening and Slaughtering Performance of Hungarian Merino, Ile de France F1 and Suffolk F1 Lambs

2005 ◽  
pp. 16-23
Author(s):  
Péter Póti ◽  
Ferenc Pajor ◽  
Edina László
Keyword(s):  
Body Weight ◽  
Live Weight ◽  
Fattening Performance ◽  
Sheep Breeds ◽  
Live Body Weight ◽  
Slaughter Performance ◽  
Percentage Weight ◽  
Dressing Percentage ◽  
Meat Sheep ◽  
Carcass Cuts

In our examination, we evaluated Hungarian Merino (ram n=30, ewe n=30), Ile de France F1 (ram n=10, ewe n=10) and Suffolk F1 (ram n=10, ewe n=10) lambs. The best fattening performance was shown by the Ile de France F1 lambs (361 g/day). After the fattening period, Hungarian Merino, Ile de France F1 and Suffolk F1 genotypes lambs were slaughtered with a live weight of 30-34 kg. Carcasses were evaluated for dressing percentage, weight of valuable carcass cuts, percentage of valuable meat, bone to meat ratio, as well as meat conformation and fat cover (S/EUROP grading).The slaughter performance proved to be the best for the Suffolk F1 concerned dressing percentage (51,7%), percentage valuable carcass cuts (81,9%). The best percentage valuable meat presented (79,4%) the Ile de France F1 lambs. The best meat conformation and fat covered were in the Suffolk F1 lambs; Hungarian Merinos showed less favourable results.Presently, the results derived from Hungarian practice that Hungarian Merino lambs are not eligible for fattening to great live body weight (30 kg). Therefore, it is necessary to revise the Hungarian Merino lambs with meat sheep breeds.

scholarly journals Feed efficiency and carcass metrics in growing cattle1

2019 ◽  
Vol 97 (11) ◽  
pp. 4405-4417 ◽  
Author(s):  
David N Kelly ◽  
Craig Murphy ◽  
Roy D Sleator ◽  
Michelle M Judge ◽  
Stephen B Conroy ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Production Efficiency ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Live Weight ◽  
Residual Energy ◽  
Feedlot Cattle ◽  
Carcass Weight ◽  
Research Perspective ◽  
Dressing Percentage

Abstract Some definitions of feed efficiency such as residual energy intake (REI) and residual gain (RG) may not truly reflect production efficiency. The energy sinks used in the derivation of the traits include metabolic live-weight; producers finishing cattle for slaughter are, however, paid on the basis of carcass weight, as opposed to live-weight. The objective of the present study was to explore alternative definitions of REI and RG which are more reflective of production efficiency, and quantify their relationship with performance, ultrasound, and carcass traits across multiple breeds and sexes of cattle. Feed intake and live-weight records were available on 5,172 growing animals, 2,187 of which also had information relating to carcass traits; all animals were fed a concentrate-based diet representative of a feedlot diet. Animal linear mixed models were used to estimate (co)variance components. Heritability estimates for all derived REI traits varied from 0.36 (REICWF; REI using carcass weight and carcass fat as energy sinks) to 0.50 (traditional REI derived with the energy sinks of both live-weight and ADG). The heritability for the RG traits varied from 0.24 to 0.34. Phenotypic correlations among all definitions of the REI traits ranged from 0.90 (REI with REICWF) to 0.99 (traditional REI with REI using metabolic preslaughter live-weight and ADG). All were different (P < 0.001) from one suggesting reranking of animals when using different definitions of REI to identify efficient cattle. The derived RG traits were either weakly or not correlated (P > 0.05) with the ultrasound and carcass traits. Genetic correlations between the REI traits with carcass weight, dressing difference (i.e., live-weight immediately preslaughter minus carcass weight) and dressing percentage (i.e., carcass weight divided by live-weight immediately preslaughter) implies that selection on any of the REI traits will increase carcass weight, lower the dressing difference and increase dressing percentage. Selection on REICW (REI using carcass weight as an energy sink), as opposed to traditional REI, should increase the carcass weight 2.2 times slower but reduce the dressing difference 4.3 times faster. While traditionally defined REI is informative from a research perspective, the ability to convert energy into live-weight gain does not necessarily equate to carcass gain, and as such, traits such as REICW and REICWF provide a better description of production efficiency for feedlot cattle.

scholarly journals Effects of carcass weight, sex and genotype on meat cuts and carcass trait in pigs

2020 ◽  
Author(s):  
Lei Xie ◽  
Jiangtao Qin ◽  
Dengshuai Cui ◽  
Xi Tang ◽  
Shijun Xiao ◽  
...  
Keyword(s):  
Growth Stage ◽  
Carcass Traits ◽  
Carcass Trait ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Major Step ◽  
Industry Chain ◽  
Important Processing ◽  
Late Growth ◽  
Carcass Cuts

Abstract Background Pork cutting is a very important processing in promoting economic appreciation in the pig industry chain. The purpose of this study was to investigate the proportion and weight of carcass cuts, and to analyze the effects of breeds or hybrids, sex and carcass weight on meat cuts. Simultaneously, explore the correlation between meat segmentation and carcass traits. Methods The sampled pigs were raised in Muyuan Food Co., Ltd. (Henan, China) under constant and consistent feeding environment and uniformly slaughtered at 180 days following standard pig slaughter processing. A total of 2,000 pigs from four genotypes of Landrace (LD), Yorkshire (YK), Landrace × Yorkshire (LY) and Duroc × Landrace × Yorkshire (DLY) were sampled and measured for 19 classes carcass cuts traits including its weights and proportions and 10 carcass traits relating to carcass length and back fat products. Effects of carcass weight, sex and genotype on meat cuts and carcass traits were investigated by linear model using home-made R scripts. Results The proportion of the middle cut increasing and proportion of the shoulder and leg cut decreasing as carcass weights increasing. More specifically, proportion of backfat increased the highest and the thickness of four-point backfat was significantly increasing with carcass weights increasing, which hint that fat deposition is the major step in the late growth stage. Besides, the proportion of shoulder cut and backfat in barrows are significantly higher than that in sows, while the leg cut is the opposite. The proportion of the middle cut and shoulder cut are the highest in LD and DLY respectively. We also found that the effects of carcass weight, sex and breed for carcass traits are consistent with cutting meats. Furthermore, the correlation between the proportions of most cutting meats and carcass traits was low. Conclusions The effects of carcass weight, sex and genotype on the weight and proportion of most cutting meats and carcass traits reflect the characteristic of breeds and its differential character of growth to fatten developments between sex. The above results laid an important foundation for the breeding of pig carcass composition.

scholarly journals Effect of Testosterone Enanthate Injection on Some Carcass Traits and Chemical Characteristics of Castrated Karadi Lambs Meat

2017 ◽  
Vol 30 (1) ◽  
pp. 38-45
Author(s):  
Ayad B. Mahmood ◽  
Ahmed S.A. Al-Obaidi
Keyword(s):  
Body Weight ◽  
Carcass Traits ◽  
Live Weight ◽  
Carcass Weight ◽  
Barley Straw ◽  
Chemical Characteristics ◽  
Research Station ◽  
Testosterone Enanthate ◽  
Positive Effects ◽  
Carcass Cuts

This study was conducted to investigate the effect of testosterone enanthate injection on some carcass traits and chemical characteristics of Karadi castrated lambs meat. Twenty seven male Karadi lambs (3-4 months of age) with an average live weight of (28.7±3.8 kg) were reared in sheep farm, research station, Faculty of Agriculture Sciences, University of Sulaimania and allocated randomly by weight to three groups (treatments) by the dosage of testosterone enanthate (6 lambs for each treatment): G1 were not injected (control), G2 were injected by 200 mg and G3 were injected by 400 mg (IM weekly). All groups animals were fed with the same concentrate diet (3% of body weight), barley straw provided ad libitum and water was free, all group lambs were castrated by rubber band two weeks before experiment begins. There were three periods of slaughter: 60 days from the beginning of the experiment, 90 days and 120 days, at the end of each period three lambs from each treatment were randomly chosen and weighted, then humanly slaughtered. Many measurements were taken such as hot and cold carcass weight, carcass length, carcass thorax circumference, rib eye area and fat thickness ,carcass cuts weight, non-carcass adipose tissue weight, edible organs and offal weight, also the chemical composition of Longissimus Dorsi muscle meat. From the results, it could be concluded that there were positive effects of testosterone enanthate injection, which was increasing of living body weight reflecting on hot and cold carcass weight increase with increasing age and period of treating with enanthate, that increase in carcass weight was related with increasing in weight of whole carcass cuts which was clearly noticed on second and third slaughtering period, and also that increase can be correlated with rib eye area which increase during the same periods , that means the gain in weight is a result of body lean gain due to testosterone enanthate injection. In addition, fat tail weight decrease may be explain as body energy turned to producing or synthesis lean instead of fat.

An evaluation of beef carcass quality 2. Influence of variation in grazing intensity and the level of barley supplementation with silage on the carcass and meat quality of Friesian steers

1972 ◽  
Vol 15 (3) ◽  
pp. 229-237
Author(s):  
C. E. Hinks ◽  
J. H. D. Prescott
Keyword(s):  
Meat Quality ◽  
Compensatory Growth ◽  
Live Weight ◽  
Grazing Intensity ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Eating Quality ◽  
Winter Period ◽  
Carcass Quality

SUMMARYTwo experiments concerning the effects, on the carcass and meat characteristics of 18-months-old Friesian steers, of variation in grazing intensity and the level of barley feeding with silage are reported.Groups of 12 steers were grazed at different intensities over 5-month grazing periods, such that live-weight differences of 38 kg and 16 kg were recorded at housing. No compensatory growth was recorded during the subsequent winter feeding period.Whilst the grazing treatments had little effect on carcass or meat quality, higher levels of barley feeding with silage over the winter period (710 v. 410 kg/steer) had significant effects on live-weight gain, and increased carcass weight by 21 kg at slaughter. The higher yield of carcass weight was reflected in significant differences in carcass composition, joint proportions and retail cut-out value. Sixty per cent of the carcass weight difference was removed as trim fat. Differences in carcass fatness were not associated with any differences in eating quality.

scholarly journals Canonical correlation analysis of body measurements and carcass traits of cross bred rabbit population

2012 ◽  
Vol 28 (4) ◽  
pp. 855-861 ◽  
Author(s):  
D.M. Ogah
Keyword(s):  
Correlation Analysis ◽  
Body Length ◽  
Canonical Correlation Analysis ◽  
Canonical Correlation ◽  
Carcass Traits ◽  
Carcass Weight ◽  
Body Measurements ◽  
Slaughter Weight ◽  
Dressing Percentage ◽  
Criterion Variables

In this study, canonical correlation analysis was applied to estimate the relationship between body measurements and carcass traits of 28 male cross bred rabbits of about 12 weeks of age, reared under semi intensive system. Four body measurements, pre-slaughter weight (PSW) , body length (BL), chest circumference (CC), and ear length (EL) as predictor variable while dressing percentage ( DP) , hot carcass weight (HCW) and cold carcass weight (CCW) as criterion variables. Pre-slaughter weight and body length had significant (P<0.001) simple correlation coefficients with the carcass traits except for dressing percentage. The three canonical variate pairs ranged between .99 to .42 and only the first pair was significant (P<0.001). From the analysis pre-slaughter weight and body length can be regarded as the main factors as live measurement traits, while dressing percentage did not have pronounced effect on the emerged criterion variables.

scholarly journals Effect of breed on growth performance and carcass composition of Aberdeen Angus, Charolais,Herefordand Simmental bulls

2011 ◽  
Vol 51 (No. 2) ◽  
pp. 47-53 ◽  
Author(s):  
L. Bartoň ◽  
D. Řehák ◽  
V. Teslík ◽  
D. Bureš ◽  
R. Zahrádková
Keyword(s):  
Weight Gain ◽  
Growth Performance ◽  
Subcutaneous Fat ◽  
Live Weight ◽  
Carcass Composition ◽  
The Other ◽  
Live Weight Gain ◽  
Weight Gains ◽  
Dressing Percentage

Breed effects on live weight gain, slaughter characteristics and carcass composition were compared in Aberdeen Angus, Charolais, Hereford and Simmental bulls. The experiment extended over 2 years and involved totally 96 animals. The target slaughter live weights were determined 550 kg for earlier maturing breeds Aberdeen Angus and Hereford and 630 kg for later maturing breeds Charolais and Simmental. Charolais and Simmental gained more rapidly (P &lt; 0.05) than Aberdeen Angus while Hereford were intermediate. Hereford had lower (P &lt; 0.05) dressing percentage than the other breeds. Percentages of grade I meat were significantly higher (P &lt; 0.05) in Charolais and Simmental. The highest percentage of separable fat was recorded in Hereford (P &lt; 0.05). Charolais and Simmental had lower (P &lt; 0.05) thickness of subcutaneous fat over MLLT than Aberdeen Angus andHereford. The later maturing bulls generally tended to achieve higher live weight gains during the experiment, produced less fat and had higher percentage of meat from high priced joints in comparison with earlier maturing animals. &nbsp;

Carcass composition and tissue weight distribution in purebred lambs from six breeds

1984 ◽  
Vol 8 ◽  
pp. 103-103
Author(s):  
A. J. Brown ◽  
B. W. Butler-Hogg ◽  
J. D. Wood
Keyword(s):  
Weight Distribution ◽  
Live Weight ◽  
Fat Content ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Carcass Quality ◽  
Quality Changes ◽  
Tissue Weight ◽  
Mature Size

Future improvements in British lamb sales depend on increasing the lean to fat ratio in cuts and joints offered for sale, since numerous surveys have shown an aversion to fat on the part of consumers. This ratio can be changed by manipulating breed and live weight at slaughter, since breeds of large mature size slaughtered at light weights are considerably leaner than those of small mature size slaughtered at heavy weights. However, there are other aspects of carcass value than overall lean and fat content. These include factors such as the proportions of individual joints and their composition. This study was carried out to examine carcass composition and carcass quality changes between 12 and 24 kg cold carcass weight (CCW) in 317 castrated males and 238 females from six pure breeds.

Genetic correlations among indicator traits for carcass composition measured in yearling beef bulls and finished feedlot steers

2005 ◽  
Vol 85 (4) ◽  
pp. 463-473 ◽  
Author(s):  
R. Bergen ◽  
S. P. Miller ◽  
J. W. Wilton
Keyword(s):  
Genetic Correlation ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Carcass Composition ◽  
Carcass Weight ◽  
Muscle Size ◽  
Longissimus Muscle ◽  
Muscle Area ◽  
Feedlot Steers ◽  
Beef Bulls

Genetic correlations were examined among 10 live growth and ultrasound traits measured in yearling beef bulls (n = 2172) and four carcass traits measured in crossbred finished feedlot steers (n = 1031). Heritabilities ranged from 0.13 (bull ultrasound longissimus muscle width) to 0.83 (yearling bull hip height). Genetic correlations indicated that selecting yearling bulls for increased growth rate and hip height would lead to higher carcass weight, increased longissimus muscle area and reduced levels of carcass marbling in steers. Bull ultrasound fat depth was positively associated with both carcass fat depth and marbling score. Most ultrasound longissimus muscle size measurements in bulls were positively associated with each other and with carcass longissimus muscle area in steers, but the magnitude of the genetic correlation with carcass measurements depended on the bull longissimus muscle size trait in question. This suggests that longissimus muscle shape in bulls may be related to carcass weight, fat and muscle traits in steers. Results confirm that while ultrasound is a valuable tool for the genetic improvement of carcass traits in beef cattle, genetic correlations between live bull ultrasound and steer carcass traits less then unity suggest that selection would benefit from multiple trait evaluations in situations where reliable carcass data are available. Key words: Ultrasound, beef carcass, heritability, genetic correlation

The effect of age, live-weight and rate-of-gain on dressing percentage and non-saleable fat content of Israel-Friesian bull calves

1967 ◽  
Vol 9 (1) ◽  
pp. 115-119 ◽  
Author(s):  
D. Levi ◽  
M. Soller ◽  
A. Shilo
Keyword(s):  
Genetic Correlation ◽  
Live Weight ◽  
Fat Content ◽  
Carcass Weight ◽  
Bull Calves ◽  
Kidney Fat ◽  
Dressing Percentage ◽  
Highly Correlated ◽  
Effect Of Age

Data were collected during 1961–2 on the live-weight, age and warm carcass weights of 83 lots of Israel-Friesian bull calves, 525 animals in all, the offspring of 26 sires. For varying numbers of these animals weight of various non-saleable fat components, including ruminal fat, kidney fat, inguinal fat and scapular fat were also obtained. Ruminal fat alone and ruminal fat plus kidney fat were found to be highly correlated with total non-saleable fat (r = 0·84 and 0·94, respectively). Heritability of dressing percentage was 0·20, of live-weight rate-of-gain 0·92, and of carcass rate-ofgain 0·49. The genetic correlation between live-weight and carcass weight was 0·7. Between-lot correlations indicated that increased rate-of-gain achieved through management will be accompanied by decreased dressing percentage and increased non-saleable fat content.

Sign in / Sign up

Export Citation Format

Share Document