scholarly journals Large eddy simulation of radiation fog: impact of dynamics on the fog life cycle

2017 ◽  
Vol 17 (21) ◽  
pp. 13017-13035 ◽  
Author(s):  
Marie Mazoyer ◽  
Christine Lac ◽  
Odile Thouron ◽  
Thierry Bergot ◽  
Valery Masson ◽  
...  
Keyword(s):  
Life Cycle ◽  
Liquid Water ◽  
Horizontal Resolution ◽  
Liquid Water Path ◽  
Radiation Fog ◽  
Near Surface ◽  
Water Path ◽  
Fog Prediction ◽  
Large Eddy ◽  
The Impact

Abstract. Large eddy simulations (LESs) of a radiation fog event occurring during the ParisFog experiment are studied with a view to analyse the impact of the dynamics of the boundary layer on the fog life cycle. The LES, performed with the Meso-NH model at 5 m resolution horizontally and 1 m vertically, and with a 2-moment microphysical scheme, includes the drag effect of a tree barrier and the deposition of droplets on vegetation. The model shows good agreement with measurements of near-surface dynamic and thermodynamic parameters and liquid water path. The blocking effect of the trees induces elevated fog formation, as actually observed, and horizontal heterogeneities during the formation. It also limits cooling and cloud water production. Deposition is found to exert the most significant impact on fog prediction as it not only erodes the fog near the surface but also modifies the fog life cycle and induces vertical heterogeneities. A comparison with the 2 m horizontal resolution simulation reveals small differences, meaning that grid convergence is achieved. Conversely, increasing numerical diffusion through a wind advection operator of lower order leads to an increase in the liquid water path and has a very similar effect to removing the tree barrier. This study allows us to establish the major dynamical ingredients needed to accurately represent the fog life cycle at very high-resolution.

scholarly journals Large-eddy simulation of radiation fog: Part 1: Impact of dynamics on microphysics

2016 ◽  
Author(s):  
Marie Mazoyer ◽  
Christine Lac ◽  
Odile Thouron ◽  
Thierry Bergot ◽  
Valery Masson ◽  
...  
Keyword(s):  
Life Cycle ◽  
Cloud Droplet ◽  
Cloud Water ◽  
Horizontal Resolution ◽  
Radiation Fog ◽  
Near Surface ◽  
Fog Prediction ◽  
Cloud Water Content ◽  
Large Eddy ◽  
The Impact

Abstract. Large Eddy Simulations (LES) of a radiation fog event occurring during ParisFog experiment have been studied with a view of analyzing the impact of the dynamics on the microphysics. The LES, performed with the Meso-NH model at 5 m resolution horizontally and 1 m vertically, and with a 2-moment microphysical scheme, included the drag effect of a trees barrier and deposition on vegetation. The model shows a good agreement with the measurements of the near surface dynamic and thermodynamic parameters as well as the cloud water content, but overestimates the cloud droplet sizes and concentration. The blocking effect of the trees induced elevated fog formation, like in the observation, and horizontal heterogeneities, and limited the cooling and the cloud water production. The deposition process was found to exert the most significant impact on the fog prediction, as it not only erodes the fog near the surface, but also modifies the fog life cycle and induces vertical heterogeneities. The comparison with the 2 m horizontal resolution simulation exhibited small differences meaning that the grid convergence was achieved. Conversely, increasing numerical diffusion through a wind advection operator of lower order led to an overestimation of the near surface microphysical fields and had almost a similar effect than removing the effect of the trees barrier. This study allows to establish the major dynamical ingredients necessary to perform correctly the fog life cycle prediction at high resolution.

scholarly journals MBL drizzle properties and their impact on cloud property retrievals

2015 ◽  
Vol 8 (4) ◽  
pp. 4307-4323
Author(s):  
P. Wu ◽  
X. Dong ◽  
B. Xi
Keyword(s):  
Liquid Water ◽  
Cloud Droplet ◽  
Number Concentration ◽  
Effective Radius ◽  
Liquid Water Path ◽  
Water Path ◽  
Cloud Property ◽  
Annual Means ◽  
Mean Differences ◽  
The Impact

Abstract. In this study, we retrieve and document drizzle properties, and investigate the impact of drizzle on cloud property retrievals from ground-based measurements at the ARM Azores site from June 2009 to December 2010. For the selected cloud and drizzle samples, the drizzle occurrence is 42.6% with a maximum of 55.8% in winter and a minimum of 35.6% in summer. The annual means of drizzle liquid water path LWPd, effective radius rd, and number concentration Nd for the rain (virga) samples are 5.48 (1.29) g m−2, 68.7 (39.5) μm, and 0.14 (0.38) cm−3. The seasonal mean LWPd values are less than 4% of the MWR-retrieved LWP values. The annual mean differences in cloud-droplet effective radius with and without drizzle are 0.12 and 0.38 μm, respectively, for the virga and rain samples. Therefore, we conclude that the impact of drizzle on cloud property retrievals is insignificant at the ARM Azores site.

Variational Assimilation of Cloud Liquid/Ice Water Path and Its Impact on NWP

2015 ◽  
Vol 54 (8) ◽  
pp. 1809-1825 ◽  
Author(s):  
Yaodeng Chen ◽  
Hongli Wang ◽  
Jinzhong Min ◽  
Xiang-Yu Huang ◽  
Patrick Minnis ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Liquid Water ◽  
Weather Prediction ◽  
Wrf Model ◽  
Liquid Water Path ◽  
Cloud Liquid Water ◽  
Water Path ◽  
Ice Water Path ◽  
Ice Water ◽  
The Impact

AbstractAnalysis of the cloud components in numerical weather prediction models using advanced data assimilation techniques has been a prime topic in recent years. In this research, the variational data assimilation (DA) system for the Weather Research and Forecasting (WRF) Model (WRFDA) is further developed to assimilate satellite cloud products that will produce the cloud liquid water and ice water analysis. Observation operators for the cloud liquid water path and cloud ice water path are developed and incorporated into the WRFDA system. The updated system is tested by assimilating cloud liquid water path and cloud ice water path observations from Global Geostationary Gridded Cloud Products at NASA. To assess the impact of cloud liquid/ice water path data assimilation on short-term regional numerical weather prediction (NWP), 3-hourly cycling data assimilation and forecast experiments with and without the use of the cloud liquid/ice water paths are conducted. It is shown that assimilating cloud liquid/ice water paths increases the accuracy of temperature, humidity, and wind analyses at model levels between 300 and 150 hPa after 5 cycles (15 h). It is also shown that assimilating cloud liquid/ice water paths significantly reduces forecast errors in temperature and wind at model levels between 300 and 150 hPa. The precipitation forecast skills are improved as well. One reason that leads to the improved analysis and forecast is that the 3-hourly rapid update cycle carries over the impact of cloud information from the previous cycles spun up by the WRF Model.

Reconciling and Validating the Cloud Thickness and Liquid Water Path Tendencies Proposed by R. Wood and J. J. van der Dussen et al.

2015 ◽  
Vol 72 (5) ◽  
pp. 2033-2040 ◽  
Author(s):  
Mohamed S. Ghonima ◽  
Joel R. Norris ◽  
Thijs Heus ◽  
Jan Kleissl
Keyword(s):  
Boundary Layer ◽  
Liquid Water ◽  
Mixed Boundary ◽  
Liquid Water Path ◽  
Water Path ◽  
Large Eddy ◽  
Heat And Moisture ◽  
Cloud Thickness ◽  
Detailed Derivation ◽  
Good Agreement

Abstract A detailed derivation of stratocumulus cloud thickness and liquid water path tendencies as a function of the well-mixed boundary layer mass, heat, and moisture budget equations is presented. The derivation corrects an error in the cloud thickness tendency equation derived by R. Wood to make it consistent with the liquid water path tendency equation derived by J. J. van der Dussen et al. The validity of the tendency equations is then tested against the output of large-eddy simulations of a typical stratocumulus-topped boundary layer case and is found to be in good agreement.

scholarly journals A New Conceptual Model for Adiabatic Fog

2021 ◽  
Author(s):  
Felipe Toledo ◽  
Martial Haeffelin ◽  
Eivind Wærsted ◽  
Jean-Charles Dupont
Keyword(s):  
Life Cycle ◽  
Conceptual Model ◽  
Real Time ◽  
Liquid Water ◽  
Critical Value ◽  
Liquid Water Path ◽  
Horizontal Visibility ◽  
Fog Water ◽  
Water Path ◽  
The Way

Abstract. We propose a new paradigm to describe the temporal evolution of continental fog layers. This paradigm defines fog as a layer saturated from the surface to a known upper boundary, and whose liquid water path (LWP) exceeds a critical value, the critical liquid water path (CLWP). When the LWP is less than the CLWP the fog water cannot extend all the way to the surface, leading to a surface horizontal visibility greater than 1 km. On the opposite, when the LWP is larger than the CLWP, the fog water extends all the way to the surface, inducing a horizontal visibility less than 1 km. The excess water with respect to the critical value is then defined as the reservoir liquid water path (RLWP). The new fog paradigm is formulated as a conceptual model that relates the liquid water path of adiabatic fog with its thickness and surface liquid water content, and allows the critical and reservoir liquid water paths to be computed. Both variables can be tracked in real time using vertical profiling measurements, enabling a real time diagnostic of fog status. The conceptual model is tested using data from seven years of measurements performed at the SIRTA observatory, combining cloud radar, microwave radiometer, ceilometer, scatterometer and weather station measurements. In this time period we found 80 fog events with reliable measurements, with 56 of these lasting more than three hours. The paper presents the conceptual model and its capability to derive the LWP from the fog CTH and surface horizontal visibility with an RMS uncertainty of 10.5 g m−2. The impact of fog liquid water path and fog top height variations on fog life cycle (formation to dissipation) is presented based on four case studies, and statistics derived from 56 fog events. Our results show in particular that the reservoir liquid water path is consistently positive during the mature phase of the fog and that it starts to decrease quasi monotonously about one hour before dissipation, reaching a near-zero value at the time of dissipation. The reservoir liquid water path and its time derivative could hence be used as an indicator for life cycle stage and support short range forecasting of fog dissipation.

scholarly journals The Spiderweb Structure of Stratocumulus Clouds

Atmosphere ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 730
Author(s):  
Georgios Matheou ◽  
Anthony B. Davis ◽  
João Teixeira
Keyword(s):  
Liquid Water ◽  
Evaporative Cooling ◽  
Liquid Water Content ◽  
Entrainment Rate ◽  
Liquid Water Path ◽  
Integral Boundary ◽  
Water Path ◽  
Large Eddy ◽  
Stratocumulus Clouds ◽  
Distinctive Structure

Stratocumulus clouds have a distinctive structure composed of a combination of lumpy cellular structures and thin elongated regions, resembling canyons or slits. The elongated slits are referred to as “spiderweb” structure to emphasize their interconnected nature. Using very high resolution large-eddy simulations (LES), it is shown that the spiderweb structure is generated by cloud-top evaporative cooling. Analysis of liquid water path (LWP) and cloud liquid water content shows that cloud-top evaporative cooling generates relatively shallow slits near the cloud top. Most of liquid water mass is concentrated near the cloud top, thus cloud-top slits of clear air have a large impact on the entire-column LWP. When evaporative cooling is suppressed in the LES, LWP exhibits cellular lumpy structure without the elongated low-LWP regions. Even though the spiderweb signature on the LWP distribution is negligible, the cloud-top evaporative cooling process significantly affects integral boundary layer quantities, such as the vertically integrated turbulent kinetic energy, mean liquid water path, and entrainment rate. In a pair of simulations driven only by cloud-top radiative cooling, evaporative cooling nearly doubles the entrainment rate.

scholarly journals Biases caused by the instrument bandwidth and beam width on simulated brightness temperature measurements from scanning microwave radiometers

2012 ◽  
Vol 5 (6) ◽  
pp. 8085-8130
Author(s):  
V. Meunier ◽  
U. Löhnert ◽  
P. Kollias ◽  
S. Crewell
Keyword(s):  
Water Vapor ◽  
Liquid Water ◽  
Beam Width ◽  
Liquid Water Path ◽  
Water Path ◽  
Antenna Beam ◽  
Atmospheric Propagation ◽  
W Band ◽  
The Impact ◽  
Receiver Bandwidth

Abstract. More so than the traditional fixed radiometers, the scanning radiometer requires a careful design to ensure high quality measurements. Here the impact of the radiometer characteristics (e.g. antenna beam width, receiver bandwidth) and atmospheric propagation (e.g. curvature of the earth and refractivity) on the scanning radiometer measurements are presented. A forward radiative transfer model that includes all these effects to represent the instrument measurements is used to estimate the biases as differences between the measurement with and without these characteristics for three commonly used frequency bands: K, V and W-band. The receiver channel bandwidth errors are not so important in K-band and W-band. Thus, the use of a wider bandwidth to improve detection at low signal-to-noise conditions is acceptable. The impact of the antenna beam width is higher than the receiver bandwidth, but, for V-band where they are of similar importance. Using simple regression algorithms, the effects of the bandwidth and beam width biases in liquid water path, integrated water vapor, and temperature are also examined. The largest errors in liquid water path and integrated water vapor are associated with the beam width errors.

scholarly journals The Impact of Low Clouds on Surface Shortwave Radiation in the ECMWF Model

2012 ◽  
Vol 140 (11) ◽  
pp. 3783-3794 ◽  
Author(s):  
Maike Ahlgrimm ◽  
Richard Forbes
Keyword(s):  
Great Plains ◽  
Liquid Water ◽  
Shortwave Radiation ◽  
Fair Weather ◽  
Liquid Water Path ◽  
Water Path ◽  
Surface Irradiance ◽  
Low Clouds ◽  
Low Cloud ◽  
The Impact

Abstract The long-term measurement records from the Atmospheric Radiation Measurement site on the Southern Great Plains show evidence of a bias in the ECMWF model’s surface irradiance. Based on previous studies, which have suggested that summertime shallow clouds may contribute to the bias, an evaluation of 146 days with observed nonprecipitating fair-weather cumulus clouds is performed. In-cloud liquid water path and effective radius are both overestimated in the model with liquid water path dominating to produce clouds that are too reflective. These are compensated by occasional cloud-free days in the model such that the fair-weather cumulus regime overall does not contribute significantly to the multiyear daytime mean surface irradiance bias of 23 W m−2. To further explore the origin of the bias, observed and modeled cloud fraction profiles over 6 years are classified and sorted based on the surface irradiance bias associated with each sample pair. Overcast low cloud conditions during the spring and fall seasons are identified as a major contributor. For samples with low cloud present in both observations and model, opposing surface irradiance biases are found for overcast and broken cloud cover conditions. A reduction of cloud liquid to a third for broken low clouds and an increase by a factor of 1.5 in overcast situations improves agreement with the observed liquid water path distribution. This approach of combining the model shortwave bias with a cloud classification helps to identify compensating errors in the model, providing guidance for a targeted improvement of cloud parameterizations.

scholarly journals Effects of model resolution on entrainment (inversion heights), cloud-radiation interactions, and cloud radiative forcing

2008 ◽  
Vol 8 (6) ◽  
pp. 20399-20425 ◽  
Author(s):  
H. Guo ◽  
Y. Liu ◽  
P. H. Daum ◽  
X. Zeng ◽  
X. Li ◽  
...  
Keyword(s):  
Liquid Water ◽  
Radiative Forcing ◽  
Horizontal Resolution ◽  
Vertical Resolution ◽  
Model Resolution ◽  
Liquid Water Path ◽  
Cloud Liquid Water ◽  
Cloud Radiative Forcing ◽  
Water Path ◽  
Cloud Liquid Water Path

Abstract. We undertook three-dimensional numerical studies of a marine stratus deck under a strong inversion using an interactive shortwave- and longwave-radiation module. A suite of sensitivity tests were conducted to address the effects of model resolution on entrainment (inversion heights), cloud-radiation interactions, and cloud radiative-forcings by varying model horizontal resolution only, varying vertical resolution only, and varying horizontal- and vertical-resolution simultaneously but with a fixed aspect ratio of 2.5. Our results showed that entrainment (inversion height) is more sensitive to vertical- than to horizontal-resolution. A vertical resolution finer than 40 m can simulate spatial- and temporal-variations in the inversion height well. The inversion height decreases with increasing vertical resolution, but tends to increase with increasing horizontal resolution. Cloud liquid water path doubles after refining both the vertical- and horizontal-resolution by a factor of four. This doubling is associated with a positive feedback between cloud water and cloud top radiative cooling, which amplifies small differences initiated by changes in the model resolution. The magnitude of the cloud radiative-forcing tends to increase with increasing model resolution, mainly attributable to the increase in the cloud liquid water path. Shortwave radiative forcing is dominant, and more sensitive to model resolution than the longwave counterpart.

scholarly journals Biases caused by the instrument bandwidth and beam width on simulated brightness temperature measurements from scanning microwave radiometers

2013 ◽  
Vol 6 (5) ◽  
pp. 1171-1187 ◽  
Author(s):  
V. Meunier ◽  
U. Löhnert ◽  
P. Kollias ◽  
S. Crewell
Keyword(s):  
Water Vapour ◽  
Liquid Water ◽  
Beam Width ◽  
Liquid Water Path ◽  
Water Path ◽  
Antenna Beam ◽  
W Band ◽  
Integrated Water Vapour ◽  
The Impact ◽  
Receiver Bandwidth

Abstract. More so than the traditional fixed radiometers, the scanning radiometer requires a careful design to ensure high quality measurements. Here the impact of the radiometer characteristics (e.g., antenna beam width and receiver bandwidth) and atmospheric propagation (e.g. curvature of the Earth and vertical gradient of refractive index) on scanning radiometer measurements are presented. A forward radiative transfer model that includes all these effects to represent the instrument measurements is used to estimate the biases. These biases are estimated using differences between the measurement with and without these characteristics for three commonly used frequency bands: K, V and W-band. The receiver channel bandwidth errors are less important in K-band and W-band. Thus, the use of a wider bandwidth to improve detection at low signal-to-noise conditions is acceptable at these frequencies. The biases caused by omitting the antenna beam width in measurement simulations are larger than those caused by omitting the receiver bandwidth, except for V-band where the bandwidth may be more important in the vicinity of absorption peaks. Using simple regression algorithms, the effects of the bandwidth and beam width biases in liquid water path, integrated water vapour, and temperature are also examined. The largest errors in liquid water path and integrated water vapour are associated with the beam width errors.

Sign in / Sign up

Export Citation Format

Share Document