scholarly journals Aerosol radiative impact during the summer 2019 heatwave produced partly by an inter-continental Saharan dust outbreak – Part 1: Short-wave dust direct radiative effect

2021 ◽  
Vol 21 (8) ◽  
pp. 6455-6479
Author(s):  
Carmen Córdoba-Jabonero ◽  
Michaël Sicard ◽  
María-Ángeles López-Cayuela ◽  
Albert Ansmann ◽  
Adolfo Comerón ◽  
...  
Keyword(s):  
Short Wave ◽  
Saharan Dust ◽  
Relative Mass ◽  
Radiative Effect ◽  
Backscatter Coefficient ◽  
Dust Transport ◽  
Total Dust ◽  
Radiative Impact ◽  
Total Particle ◽  
Transport Path

Abstract. The short-wave (SW) direct radiative effect (DRE) during the summer 2019 heatwave produced partly by a moderate, long-lasting Saharan dust outbreak over Europe is analysed in this study. Two European sites (periods) are considered: Barcelona, Spain (23–30 June), and Leipzig, Germany (29 and 30 June), 1350 km apart from each other. Major data are obtained from AERONET and polarised Micro-Pulse Lidar (P-MPL) observations. Modelling is used to describe the different dust pathways, as observed at both sites. The coarse dust (Dc) and fine dust (Df) components (with total dust, DD = Dc + Df) are identified in the profiles of the total particle backscatter coefficient using the POLIPHON (POlarisation LIdar PHOtometer Networking) method in synergy with P-MPL measurements. This information is used to calculate the relative mass loading and the centre-of-mass height, as well as the contribution of each dust mode to the total dust DRE. Several aspects of the ageing of dust are put forward. The mean dust optical depth and its Df/DD ratios are, respectively, 0.153 and 24 % in Barcelona and 0.039 and 38 % in Leipzig; this Df increase in Leipzig is attributed to a longer dust transport path in comparison to Barcelona. The dust produced a cooling effect on the surface with a mean daily DRE of −9.1 and −2.5 W m−2, respectively, in Barcelona and Leipzig, but the Df/DD DRE ratio is larger for Leipzig (52 %) than for Barcelona (37 %). Cooling is also observed at the top of the atmosphere (TOA), although less intense than on the surface. However, the Df/DD DRE ratio at the TOA is even higher (45 % and 60 %, respectively, in Barcelona and Leipzig) than on the surface. Despite the predominance of Dc particles under dusty conditions, the SW radiative impact of Df particles can be comparable to, even higher than, that induced by the Dc ones. In particular, the Df/DD DRE ratio in Barcelona increases by +2.4 % d−1 (surface) and +2.9 % d−1 (TOA) during the dusty period. This study is completed by a second paper about the long-wave and net radiative effects. These results are especially relevant for the next ESA EarthCARE mission (planned in 2022) as it is devoted to aerosol–cloud–radiation interaction research.

scholarly journals Aerosol radiative effect during the summer 2019 heatwave produced partly by an inter-continental Saharan dust outbreak. 1. Shortwave dust-induced direct impact

2020 ◽  
Author(s):  
Carmen Córdoba-Jabonero ◽  
Michaël Sicard ◽  
María-Ángeles López-Cayuela ◽  
Albert Ansmann ◽  
Adolfo Comerón ◽  
...  
Keyword(s):  
Saharan Dust ◽  
Relative Mass ◽  
Radiative Effect ◽  
Centre Of Mass ◽  
Backscatter Coefficient ◽  
Radiative Impact ◽  
Total Particle ◽  
The Mean ◽  
Interaction Research ◽  
Major Data

Abstract. The shortwave (SW) direct radiative effect during the summer 2019 heatwave produced partly by a moderate, long-lasting Saharan dust outbreak over Europe is analysed in this study. Two European sites (periods) are considered: Barcelona, Spain, (23–30 June) and Leipzig, Germany (29–30 June). Major data are obtained from AERONET and MPLNET observations. Modelling is used to describe the different dust pathways. The dust coarse (Dc) and fine (Df) components (total dust, DD = Dc + Df) are separated in the profiles of the total particle backscatter coefficient using the POLIPHON method in synergy with MPLNET measurements. This information is used to calculate the relative mass loading and the centre-of-mass height, as well as the contribution of each dust mode to the DD radiative effect (DRE). The mean dust optical depth and its Df / DD ratios are, respectively, 0.153 and 24 % in Barcelona and 0.039 and 38 % in Leipzig. The dust produced a cooling effect on the surface with a daily mean DRE (Df / DD DRE ratio) of −9.1 W m−2 (37 %) in Barcelona and −2.5 W m−2 (52 %) in Leipzig. Although less intense than on surface, a cooling is also observed at the top-of-the-atmosphere (TOA), where the Df / DD DRE ratio is even though higher (45 % and 60 %, respectively, in Barcelona and Leipzig). Despite the predominance of Dc particles under dusty conditions, the SW radiative impact of Df particles can be comparable to, even higher than, that induced by the Dc ones. In particular, the Df / DD DRE ratio in Barcelona increases by +2.4 % (surface) and +2.9 % (TOA) day−1 along the dusty period. These results are especially relevant for the next ESA EarthCARE mission (planned in 2022), as devoted to aerosol-cloud-radiation interaction research.

scholarly journals Aerosol radiative impact during the summer 2019 heatwave produced partly by an inter-continental Saharan dust outbreak – Part 2: Long-wave and net dust direct radiative effect

2021 ◽  
Author(s):  
Michaël Sicard ◽  
Carmen Córdoba-Jabonero ◽  
María-Ángeles López-Cayuela ◽  
Albert Ansmann ◽  
Adolfo Comerón ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Saharan Dust ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Radiative Effect ◽  
Radiative Efficiency ◽  
Total Dust ◽  
Coarse Mode ◽  
Fine Mode

Abstract. This paper is the companion paper of Córdoba-Jabonero et al. (2021). It deals with the estimation of the longwave (LW) and net dust direct radiative effect (DRE) during the dust episode that occurred between 23 and 30 June, 2019, and coincided with a mega-heatwave. The analysis is performed at two European sites where polarized-Micro-Pulse Lidars ran continuously to retrieve the vertical distribution of the dust optical properties: Barcelona, Spain, 23–30 June, and Leipzig, Germany, 29–30 June. The radiative effect is computed with the GAME radiative transfer model separately for the fine- and coarse-mode dust. The instantaneous and daily radiative effect and radiative efficiency (DREff) are provided for the fine-mode, coarse-mode and total dust at the surface, top of the atmosphere (TOA) and in the atmosphere. The fine-mode daily LW DRE is small (< 6 % of the shortwave (SW) component) which makes the coarse-mode LW DRE the main modulator of the total dust net DRE. The coarse-mode LW DRE starts exceeding (in absolute values) the SW component in the middle of the episode which produces positive coarse-mode net DRE at both the surface and TOA. Such an unusual tendency is attributed to increasing coarse-mode size and surface temperature along the episode. This has the effect of reducing the SW cooling in Barcelona up to the point of reaching total dust net DRE positive (+0.9 W m−2) on one occasion at the surface and quasi-neutral (−0.6 W m−2) at TOA. When adding the LW component, the total dust SW radiative efficiency is reduced by a factor 1.6 at both surface (on average over the episode, the total dust net DREff is −54.1 W m−2 τ−1) and TOA (−37.3 W m−2 τ−1). A sensitivity study performed on the surface temperature and the air temperature in the dust layer, both linked to the heatwave and upon which the LW DRE strongly depends, shows that the heatwave contributed to reduce the dust net cooling effect at the surface and that it had nearly no effect at TOA. Its subsequent effect was thus to reduce the heating of the atmosphere produced by the dust particles.

scholarly journals Radiative Effect and Mixing Processes of a Long-Lasting Dust Event over Athens, Greece, during the COVID-19 Period

Atmosphere ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 318
Author(s):  
Panagiotis Kokkalis ◽  
Ourania Soupiona ◽  
Christina-Anna Papanikolaou ◽  
Romanos Foskinis ◽  
Maria Mylonaki ◽  
...  
Keyword(s):  
Atmospheric Pollutants ◽  
Saharan Dust ◽  
Radiative Effect ◽  
Atmospheric Conditions ◽  
Dust Event ◽  
Mixing Processes ◽  
Hysplit Model ◽  
European Continent ◽  
Dust Layer ◽  
Ground Based Lidar

We report on a long-lasting (10 days) Saharan dust event affecting large sections of South-Eastern Europe by using a synergy of lidar, satellite, in-situ observations and model simulations over Athens, Greece. The dust measurements (11–20 May 2020), performed during the confinement period due to the COVID-19 pandemic, revealed interesting features of the aerosol dust properties in the absence of important air pollution sources over the European continent. During the event, moderate aerosol optical depth (AOD) values (0.3–0.4) were observed inside the dust layer by the ground-based lidar measurements (at 532 nm). Vertical profiles of the lidar ratio and the particle linear depolarization ratio (at 355 nm) showed mean layer values of the order of 47 ± 9 sr and 28 ± 5%, respectively, revealing the coarse non-spherical mode of the probed plume. The values reported here are very close to pure dust measurements performed during dedicated campaigns in the African continent. By utilizing Libradtran simulations for two scenarios (one for typical midlatitude atmospheric conditions and one having reduced atmospheric pollutants due to COVID-19 restrictions, both affected by a free tropospheric dust layer), we revealed negligible differences in terms of radiative effect, of the order of +2.6% (SWBOA, cooling behavior) and +1.9% (LWBOA, heating behavior). Moreover, the net heating rate (HR) at the bottom of the atmosphere (BOA) was equal to +0.156 K/d and equal to +2.543 K/d within 1–6 km due to the presence of the dust layer at that height. On the contrary, the reduction in atmospheric pollutants could lead to a negative HR (−0.036 K/d) at the bottom of the atmosphere (BOA) if dust aerosols were absent, while typical atmospheric conditions are estimated to have an almost zero net HR value (+0.006 K/d). The NMMB-BSC forecast model provided the dust mass concentration over Athens, while the air mass advection from the African to the European continent was simulated by the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model.

scholarly journals Saharan dust and giant quartz particle transport towards Iceland

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
György Varga ◽  
Pavla Dagsson-Walhauserová ◽  
Fruzsina Gresina ◽  
Agusta Helgadottir
Keyword(s):  
Numerical Models ◽  
Saharan Dust ◽  
Atmospheric Environment ◽  
The Arctic ◽  
Dust Particles ◽  
Atmospheric Flow ◽  
Dust Transport ◽  
Strong Winds ◽  
Dust Events ◽  
Local Dust

AbstractMineral dust emissions from Saharan sources have an impact on the atmospheric environment and sedimentary units in distant regions. Here, we present the first systematic observations of long-range Saharan dust transport towards Iceland. Fifteen Saharan dust episodes were identified to have occurred between 2008 and 2020 based on aerosol optical depth data, backward trajectories and numerical models. Icelandic samples from the local dust sources were compared with deposited dust from two severe Saharan dust events in terms of their granulometric and mineralogical characteristics. The episodes were associated with enhanced meridional atmospheric flow patterns driven by unusual meandering jets. Strong winds were able to carry large Saharan quartz particles (> 100 µm) towards Iceland. Our results confirm the atmospheric pathways of Saharan dust towards the Arctic, and identify new northward meridional long-ranged transport of giant dust particles from the Sahara, including the first evidence of their deposition in Iceland as previously predicted by models.

A Lagrangian method to descripe Saharan dust transport towards Europe

1997 ◽  
Vol 28 ◽  
pp. S461-S462
Author(s):  
S. Külzer ◽  
R. Ries ◽  
L. Schütz
Keyword(s):  
Lagrangian Method ◽  
Saharan Dust ◽  
Dust Transport

scholarly journals Three-dimensional evolution of Saharan dust transport towards Europe based on a 9-year EARLINET-optimized CALIPSO dataset

2017 ◽  
Vol 17 (9) ◽  
pp. 5893-5919 ◽  
Author(s):  
Eleni Marinou ◽  
Vassilis Amiridis ◽  
Ioannis Binietoglou ◽  
Athanasios Tsikerdekis ◽  
Stavros Solomos ◽  
...  
Keyword(s):  
Cloud Condensation Nuclei ◽  
Three Dimensional ◽  
Satellite Observation ◽  
Saharan Dust ◽  
Winter Period ◽  
Dust Transport ◽  
The Balkans ◽  
Potential Applications ◽  
The Mediterranean ◽  
Dust Evolution

Abstract. In this study we use a new dust product developed using CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) observations and EARLINET (European Aerosol Research Lidar Network) measurements and methods to provide a 3-D multiyear analysis on the evolution of Saharan dust over North Africa and Europe. The product uses a CALIPSO L2 backscatter product corrected with a depolarization-based method to separate pure dust in external aerosol mixtures and a Saharan dust lidar ratio (LR) based on long-term EARLINET measurements to calculate the dust extinction profiles. The methodology is applied on a 9-year CALIPSO dataset (2007–2015) and the results are analyzed here to reveal for the first time the 3-D dust evolution and the seasonal patterns of dust over its transportation paths from the Sahara towards the Mediterranean and Continental Europe. During spring, the spatial distribution of dust shows a uniform pattern over the Sahara desert. The dust transport over the Mediterranean Sea results in mean dust optical depth (DOD) values up to 0.1. During summer, the dust activity is mostly shifted to the western part of the desert where mean DOD near the source is up to 0.6. Elevated dust plumes with mean extinction values between 10 and 75 Mm−1 are observed throughout the year at various heights between 2 and 6 km, extending up to latitudes of 40° N. Dust advection is identified even at latitudes of about 60° N, but this is due to rare events of episodic nature. Dust plumes of high DOD are also observed above the Balkans during the winter period and above northwest Europe during autumn at heights between 2 and 4 km, reaching mean extinction values up to 50 Mm−1. The dataset is considered unique with respect to its potential applications, including the evaluation of dust transport models and the estimation of cloud condensation nuclei (CCN) and ice nuclei (IN) concentration profiles. Finally, the product can be used to study dust dynamics during transportation, since it is capable of revealing even fine dynamical features such as the particle uplifting and deposition on European mountainous ridges such as the Alps and Carpathian Mountains.

scholarly journals Synergetic monitoring of Saharan dust plumes and potential impact on surface: a case study of dust transport from Canary Islands to Iberian Peninsula

2011 ◽  
Vol 11 (7) ◽  
pp. 3067-3091 ◽  
Author(s):  
C. Córdoba-Jabonero ◽  
M. Sorribas ◽  
J. L. Guerrero-Rascado ◽  
J. A. Adame ◽  
Y. Hernández ◽  
...  
Keyword(s):  
Iberian Peninsula ◽  
Particle Deposition ◽  
Ground Level ◽  
In Situ Measurements ◽  
Saharan Dust ◽  
Dust Transport ◽  
Air Masses ◽  
Potential Impact

Abstract. The synergetic use of meteorological information, remote sensing both ground-based active (lidar) and passive (sun-photometry) techniques together with backtrajectory analysis and in-situ measurements is devoted to the characterization of dust intrusions. A case study of air masses advected from the Saharan region to the Canary Islands and the Iberian Peninsula, located relatively close and far away from the dust sources, respectively, was considered for this purpose. The observations were performed over three Spanish geographically strategic stations within the dust-influenced area along a common dust plume pathway monitored from 11 to 19 of March 2008. A 4-day long dust event (13–16 March) over the Santa Cruz de Tenerife Observatory (SCO), and a linked short 1-day dust episode (14 March) in the Southern Iberian Peninsula over the Atmospheric Sounding Station "El Arenosillo" (ARN) and the Granada station (GRA) were detected. Meteorological conditions favoured the dust plume transport over the area under study. Backtrajectory analysis clearly revealed the Saharan region as the source of the dust intrusion. Under the Saharan air masses influence, AERONET Aerosol Optical Depth at 500 nm (AOD500) ranged from 0.3 to 0.6 and Ångström Exponent at 440/675 nm wavelength pair (AE440/675) was lower than 0.5, indicating a high loading and predominance of coarse particles during those dusty events. Lidar observations characterized their vertical layering structure, identifying different aerosol contributions depending on altitude. In particular, the 3-km height dust layer transported from the Saharan region and observed over SCO site was later on detected at ARN and GRA stations. No significant differences were found in the lidar (extinction-to-backscatter) ratio (LR) estimation for that dust plume over all stations when a suitable aerosol scenario for lidar data retrieval is selected. Lidar-retrieved LR values of 60–70 sr were obtained during the main dust episodes. These similar LR values found in all the stations suggest that dust properties were kept nearly unchanged in the course of its medium-range transport. In addition, the potential impact on surface of that Saharan dust intrusion over the Iberian Peninsula was evaluated by means of ground-level in-situ measurements for particle deposition assessment together with backtrajectory analysis. However, no connection between those dust plumes and the particle sedimentation registered at ground level is found. Differences on particle deposition processes observed in both Southern Iberian Peninsula sites are due to the particular dust transport pattern occurred over each station. Discrepancies between columnar-integrated and ground-level in-situ measurements show a clear dependence on height of the dust particle size distribution. Then, further vertical size-resolved observations are needed for evaluation of the impact on surface of the Saharan dust arrival to the Iberian Peninsula.

scholarly journals Saharan dust levels in Greece and received inhalation doses

2008 ◽  
Vol 8 (3) ◽  
pp. 11967-11996 ◽  
Author(s):  
C. Mitsakou ◽  
G. Kallos ◽  
N. Papantoniou ◽  
C. Spyrou ◽  
S. Solomos ◽  
...  
Keyword(s):  
Urban Areas ◽  
Particle Deposition ◽  
Mineral Dust ◽  
Weather Conditions ◽  
Pm10 Concentration ◽  
Saharan Dust ◽  
Dust Particles ◽  
Annual Number ◽  
Human Respiratory Tract ◽  
Dust Transport

Abstract. The desert of Sahara is one of the major sources of mineral dust on Earth, producing around 2×108 tons/yr. Under certain weather conditions, dust particles from Saharan desert get transported over the Mediterranean Sea and most of Europe. The limiting values set by the directive EC/30/1999 of European Union can easily be exceeded by the transport of desert dust particles in all south European areas and especially urban. In this study, the effects of dust transport on air quality in several Greek urban areas are quantified. PM10 concentration values from stationary monitoring stations are compared to dust concentrations for the 4-year period 2003–2006. The dust concentration values in the Greek areas were estimated by the SKIRON modelling system coupled with embedded algorithms describing the dust cycle. The mean annual dust contribution to daily-averaged PM10 concentration values was found to be around or even greater than 10% in the urban areas throughout the years examined. Natural dust transport may contribute by much more than 20% to the annual number of exceedances – PM10 values greater than EU limits – depending on the specific monitoring location. In a second stage of the study, the inhaled lung dose received by the residents in various Greek locations is calculated. The particle deposition efficiency of mineral dust at the different parts of the human respiratory tract is determined by applying a lung dosimetry numerical model, which incorporates inhalation dynamics and aerosol physical processes. The inhalation dose from mineral dust particles was greater in the upper respiratory system (extrathoracic region) and less significant in the lungs, especially in the sensitive alveolar region. However, in cases of dust episodes, the amounts of mineral dust deposited along the human lung are comparable to those received during exposure in heavily polluted urban or smoking areas.

scholarly journals The Electrical Activity of Saharan Dust as perceived from Surface Electric Field Observations in Greece

2020 ◽  
Author(s):  
Vasiliki Daskalopoulou ◽  
Sotirios A. Mallios ◽  
Zbigniew Ulanowski ◽  
George Hloupis ◽  
Anna Gialitaki ◽  
...  
Keyword(s):  
Field Strength ◽  
Electric Field ◽  
Electric Field Strength ◽  
Field Enhancement ◽  
Electric Circuit ◽  
Saharan Dust ◽  
Backscatter Coefficient ◽  
Lidar System ◽  
Realistic Description ◽  
Atmospheric Conductivity

Abstract. We report on the electric field variations during Saharan dust advection over two atmospheric remote stations in Greece, using synergistic observations of the vertical atmospheric electric field strength (Ez) at ground and the lidar-derived particle backscatter coefficient profiles. Both parameters were monitored for the first time with the simultaneous deployment of a ground-based field mill electrometer and a multiwavelength lidar system. The field mill timeseries are processed to extract the diurnal variations of the Global Electric Circuit and remove fast field perturbations due to peak lightning activity. In order to identify the influence of the elevated dust layers on the ground Ez, we extract a Localized Reference Electric Field from the timeseries that reflects the local fair weather activity. Then, we compare it with the reconstructed daily average behaviour of the electric field and the Saharan dust layers' evolution, as depicted by the lidar system. Reported cases of enhanced vertical electric field for detached pure dust layers suggest the presence of in-layer electric charges. Although higher dust loads are expected to result in electric field enhancement, episodic cases that reduce the electric field are also observed. To quantitatively approach our results, we examine the dependency of Ez against theoretical assumptions for the distribution of separated charges within the electrified dust layer. Electrically neutral dust is approximated by atmospheric conductivity reduction, while charge separation areas within electrically active dust layers are approximated as finite extent cylinders. This physical approximation constitutes a more realistic description of the distribution of charges, as opposed to infinite extent geometries, and allows for analytical solutions of the electric field strength, so that observed electric field variations during the monitored dust outbreaks can be explained.

Sign in / Sign up

Export Citation Format

Share Document