scholarly journals The climate penalty for clean fossil fuel combustion

2011 ◽  
Vol 11 (9) ◽  
pp. 24567-24589 ◽  
Author(s):  
W. Junkermann ◽  
B. Vogel ◽  
M. A. Sutton
Keyword(s):  
Ultrafine Particles ◽  
Power Plants ◽  
Cloud Condensation Nuclei ◽  
Regional Climate ◽  
Fine Particulate Matter ◽  
Regional Scale ◽  
Cloud Microphysics ◽  
Environmental Damage ◽  
Particulate Emissions ◽  
Gas Cleaning

Abstract. To cope with the world's growing demand for energy, a large number of coal-fired power plants are currently in operation or under construction. To prevent environmental damage from acidic sulphur and particulate emissions, many such installations are equipped with flue gas cleaning technology that reduces the emitted amounts of sulphur dioxide (SO2) and nitrogen dioxide (NO2). However, the consequences of this technology for aerosol emissions, and in particular the regional scale impact on cloud microphysics, have not been studied until now. We performed airborne investigations to measure aerosol size distributions in the air masses downwind of coal-fired power installations. We show how the current generation of clean technology reduces the emission of sulphur and fine particulate matter, but leads to an unanticipated increase in the direct emission of ultrafine particles (1–10 nm median diameter) which are highly effective precursors of cloud condensation nuclei (CCN). Our analysis shows how these additional ultrafine particles modify cloud microphysics, as well as precipitation intensity and distribution on a regional scale downwind of emission sources. Effectively, the number of small water droplets is increased, thus reducing the water available for large droplets and rain formation. The corresponding changes in the precipitation budget with a shift from more frequent steady rain to occasionally more vigorous rain events, or even a significant regional reduction of annual precipitation, introduce an unanticipated risk for regional climate and agricultural production, especially in semi-arid climate zones.

scholarly journals The climate penalty for clean fossil fuel combustion

2011 ◽  
Vol 11 (24) ◽  
pp. 12917-12924 ◽  
Author(s):  
W. Junkermann ◽  
B. Vogel ◽  
M. A. Sutton
Keyword(s):  
Ultrafine Particles ◽  
Power Plants ◽  
Cloud Condensation Nuclei ◽  
Regional Climate ◽  
Fine Particulate Matter ◽  
Regional Scale ◽  
Cloud Microphysics ◽  
Environmental Damage ◽  
Particulate Emissions ◽  
Gas Cleaning

Abstract. To cope with the world's growing demand for energy, a large number of coal-fired power plants are currently in operation or under construction. To prevent environmental damage from acidic sulphur and particulate emissions, many such installations are equipped with flue gas cleaning technology that reduces the emitted amounts of sulphur dioxide (SO2) and nitrogen dioxide (NO2). However, the consequences of this technology for aerosol emissions, and in particular the regional scale impact on cloud microphysics, have not been studied until now. We performed airborne investigations to measure aerosol size distributions in the air masses downwind of coal-fired power installations. We show how the current generation of clean technology reduces the emission of sulphur and fine particulate matter, but leads to an unanticipated increase in the direct emission of ultrafine particles (1–10 nm median diameter) which are highly effective precursors of cloud condensation nuclei (CCN). Our analysis shows how these additional ultrafine particles probably modify cloud microphysics, as well as precipitation intensity and distribution on a regional scale downwind of emission sources. Effectively, the number of small water droplets might be increased, thus reducing the water available for large droplets and rain formation. The possible corresponding changes in the precipitation budget with a shift from more frequent steady rain to occasionally more vigorous rain events, or even a significant regional reduction of annual precipitation, introduce an unanticipated risk for regional climate and agricultural production, especially in semi-arid climate zones.

scholarly journals Regional scale effects of the aerosol cloud interaction simulated with an online coupled comprehensive chemistry model

2011 ◽  
Vol 11 (9) ◽  
pp. 4411-4423 ◽  
Author(s):  
M. Bangert ◽  
C. Kottmeier ◽  
B. Vogel ◽  
H. Vogel
Keyword(s):  
Cloud Condensation Nuclei ◽  
Regional Scale ◽  
Cloud Droplet ◽  
Cloud Microphysics ◽  
Model System ◽  
Number Concentration ◽  
Condensation Nuclei ◽  
Close Link ◽  
Cloud Droplet Number Concentration ◽  
The Mean

Abstract. We have extended the coupled mesoscale atmosphere and chemistry model COSMO-ART to account for the transformation of aerosol particles into cloud condensation nuclei and to quantify their interaction with warm cloud microphysics on the regional scale. The new model system aims to fill the gap between cloud resolving models and global scale models. It represents the very complex microscale aerosol and cloud physics as detailed as possible, whereas the continental domain size and efficient codes will allow for both studying weather and regional climate. The model system is applied in a first extended case study for Europe for a cloudy five day period in August 2005. The model results show that the mean cloud droplet number concentration of clouds is correlated with the structure of the terrain, and we present a terrain slope parameter TS to classify this dependency. We propose to use this relationship to parameterize the probability density function, PDF, of subgrid-scale cloud updraft velocity in the activation parameterizations of climate models. The simulations show that the presence of cloud condensation nuclei (CCN) and clouds are closely related spatially. We find high aerosol and CCN number concentrations in the vicinity of clouds at high altitudes. The nucleation of secondary particles is enhanced above the clouds. This is caused by an efficient formation of gaseous aerosol precursors above the cloud due to more available radiation, transport of gases in clean air above the cloud, and humid conditions. Therefore the treatment of complex photochemistry is crucial in atmospheric models to simulate the distribution of CCN. The mean cloud droplet number concentration and droplet diameter showed a close link to the change in the aerosol. To quantify the net impact of an aerosol change on the precipitation we calculated the precipitation susceptibility β for the whole model domain over a period of two days with an hourly resolution. The distribution function of β is slightly skewed to positive values and has a mean of 0.23. Clouds with a liquid water path LWP of approximately 0.85 kg m−2 are on average most susceptible to aerosol changes in our simulations with an absolute value of β of 1. The average β for LWP between 0.5 kg m−2 and 1 kg m−2 is approximately 0.4.

scholarly journals A comparison of two chemistry and aerosol schemes on the regional scale and resulting impact on radiative properties and warm and cold aerosol-cloud interactions

2017 ◽  
Author(s):  
Franziska Glassmeier ◽  
Anna Possner ◽  
Bernhard Vogel ◽  
Heike Vogel ◽  
Ulrike Lohmann
Keyword(s):  
Cloud Condensation Nuclei ◽  
Regional Scale ◽  
Cloud Microphysics ◽  
Atmospheric Modeling ◽  
Sulfur Cycle ◽  
Radiative Properties ◽  
Saharan Dust ◽  
Modeling Framework ◽  
Sulfate Production ◽  
Aerosol Module

Abstract. The complexity of the atmospheric aerosol causes large uncertainties in its parameterization in atmospheric models. In a process-based comparison of two aerosol and chemistry schemes within the regional atmospheric modeling framework COSMO-ART, we identify key sensitivities of aerosol parameterizations. We consider the aerosol module MADE in combination with full gas-phase chemistry and the aerosol module M7 in combination with a constant-oxidant-field-based sulfur cycle. For a Saharan dust outbreak reaching Europe, modeled aerosol populations are more sensitive to structural differences between the schemes, in particular the consideration of aqueous-phase sulfate production, the selection of aerosol species and modes and modal composition, than to parametric choices like modal standard deviation and the parameterization of aerosol dynamics. The same observation applies to aerosol optical depth (AOD) and the concentrations of cloud condensation nuclei (CCN). Differences in the concentrations of ice-nucleating particles (INP) are masked by uncertainties between two ice-nucleation parameterizations and their coupling to the aerosol scheme. Differences in cloud droplet and ice crystal number concentrations are buffered by cloud microphysics as we show in a susceptibility analysis.

scholarly journals Ultrafine Particles in the Lower Troposphere: Major Sources, Invisible Plumes, and Meteorological Transport Processes

2018 ◽  
Vol 99 (12) ◽  
pp. 2587-2602 ◽  
Author(s):  
Wolfgang Junkermann ◽  
Jorg M. Hacker
Keyword(s):  
Thermal Convection ◽  
Ultrafine Particles ◽  
Cloud Condensation Nuclei ◽  
Regional Scale ◽  
Three Dimensional ◽  
Lower Troposphere ◽  
Transport Processes ◽  
Airborne Measurements ◽  
Power Stations

AbstractUltrafine particles (UFPs) are distributed highly unevenly in the lower troposphere. Although these UFPs are positively detectable and have been studied for more than a century, their three-dimensional distribution, formation, and budget in the atmosphere remain largely uncertain, despite their obvious climate relevance. This is due to their short lifetime and the fact that they are invisible to the human eye and to remote sensing techniques. From the moment of their emission or generation, their spatial distribution is a result of meteorological processes, regional-scale transport, local thermal convection, and rapid loss by interaction with clouds as cloud condensation nuclei. Here, we report about three-dimensional airborne in situ studies aimed at investigating UFP sources, distribution, and behavior on different spatial and temporal scales. We identified fossil fuel–burning power stations, refineries, and smelters as major anthropogenic UFP sources. On a regional scale, their emissions are significantly higher than urban emissions. Particle emissions from such power stations are released typically at altitudes between 200 and 300 m AGL. Detailed in situ measurements of particle concentration and related parameters, together with meteorological measurements and analyses, enable reliable source attribution even over several hundred kilometers downwind from the emitter. Comprehensive meteorological analysis is required to understand the highly variable 3D concentration patterns generated by advective transport and thermal convection. Knowledge of primary emission strength, together with size distributions and atmospheric 3D transport of UFPs derived from airborne measurements, makes it possible to estimate the aerosols’ impact on meteorology, hydrological cycles, and climate.

Advances in absorbents and techniques used in wet and dry FGD: a critical review

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Lokesh Kumar ◽  
Susanta Kumar Jana
Keyword(s):  
Power Plants ◽  
Low Cost ◽  
Fine Particulate Matter ◽  
Packed Column ◽  
Toxic Substance ◽  
Cost Effective ◽  
Solid Wastes ◽  
Raw Material ◽  
Process Industries ◽  
Slurry Bubble Columns

Abstract Sulfur dioxide is considered as an extremely harmful and toxic substance among the air pollutants emitted from the lignite- and other high-sulfur-coal based power plants, old tires processing units, smelters, and many other process industries. Various types of absorbents and desulfurization technologies have been developed and adopted by the industries to reduce the emission rate of SO2 gas. The present paper focuses on the ongoing advances in the development of varieties of regenerative and non-regenerative absorbents viz., Ca-based, Mg-based, Fe-based, Na-based, N2-based, and others along with various FGD technology, viz., wet, dry or semi-dry processes. Additionally, different types of contactors viz., packed column, jet column, spray tower, and slurry bubble columns along with their significant operational and design features have also been discussed. In the existing or newly installed limestone-based FGD plants, an increasing trend of the utilization of newly developed technologies such as limestone forced oxidation (LSFO) and magnesium-enhanced lime (MEL) are being used at an increasing rate. However, the development of low-cost sorbents, particularly suitable solid wastes, for the abatement of SO2 emission needs to be explored sincerely. Many such wastes cause air pollution by way of entrainment of fine particulate matter (PM), groundwater contamination by its leaching, or brings damage to crops due to its spreading onto the cultivation land. One such pollutant is marble waste and in this work, this has been suggested as a suitable substitute to limestone and cost-effective sorbent for the desulfurization of flue gases. The product of this process being sellable in the market or may be used as a raw material in several industries, it can also prove to be an important route of recycling and reuse of one of the air and water-polluting solid wastes.

scholarly journals Summertime observations of ultrafine particles and cloud condensation nuclei from the boundary layer to the free troposphere in the Arctic

2016 ◽  
Author(s):  
Julia Burkart ◽  
Megan D. Willis ◽  
Heiko Bozem ◽  
Jennie L. Thomas ◽  
Kathy Law ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Ultrafine Particles ◽  
Cloud Condensation Nuclei ◽  
Particle Diameter ◽  
Open Ocean ◽  
The Arctic ◽  
Condensation Nuclei ◽  
Aerosol Composition ◽  
Low Level ◽  
20 Nm

Abstract. The Arctic is extremely sensitive to climate change. Shrinking sea ice extent increases the area covered by open ocean during Arctic summer, which impacts the surface albedo and aerosol and cloud properties among many things. In this context extensive aerosol measurements (aerosol composition, particle number and size, cloud condensation nuclei, and trace gases) were made during 11 flights of the NETCARE July, 2014 airborne campaign conducted from Resolute Bay, Nunavut (74N, 94W). Flights routinely included vertical profiles from about 60 to 3000 m a.g.l. as well as several low-level horizontal transects over open ocean, fast ice, melt ponds, and polynyas. Here we discuss the vertical distribution of ultrafine particles (UFP, particle diameter, dp: 5–20 nm), size distributions of larger particles (dp: 20 nm to 1 μm), and cloud condensation nuclei (CCN, supersaturation = 0.6 %) in relation to meteorological conditions and underlying surfaces. UFPs were observed predominantly within the boundary layer, where concentrations were often several hundreds to a few thousand particles per cubic centimeter. Occasionally, particle concentrations below 10 cm−3 were found. The highest UFP concentrations were observed above open ocean and at the top of low-level clouds, whereas numbers over ice-covered regions were substantially lower. Overall, UFP formation events were frequent in a clean boundary layer with a low condensation sink. In a few cases this ultrafine mode extended to sizes larger than 40 nm, suggesting that these UFP can grow into a size range where they can impact clouds and therefore climate.

scholarly journals Broadening of Cloud Droplet Spectra through Eddy Hopping: Turbulent Entraining Parcel Simulations

2018 ◽  
Vol 75 (10) ◽  
pp. 3365-3379 ◽  
Author(s):  
Gustavo C. Abade ◽  
Wojciech W. Grabowski ◽  
Hanna Pawlowska
Keyword(s):  
Droplet Size ◽  
Turbulent Mixing ◽  
Cloud Condensation Nuclei ◽  
Cloud Droplet ◽  
Cloud Microphysics ◽  
Droplet Growth ◽  
Size Spectrum ◽  
Entrainment Rate ◽  
The Mean ◽  
The Impact

This paper discusses the effects of cloud turbulence, turbulent entrainment, and entrained cloud condensation nuclei (CCN) activation on the evolution of the cloud droplet size spectrum. We simulate an ensemble of idealized turbulent cloud parcels that are subject to entrainment events modeled as a random process. Entrainment events, subsequent turbulent mixing inside the parcel, supersaturation fluctuations, and the resulting stochastic droplet activation and growth by condensation are simulated using a Monte Carlo scheme. Quantities characterizing the turbulence intensity, entrainment rate, CCN concentration, and the mean fraction of environmental air entrained in an event are all specified as independent external parameters. Cloud microphysics is described by applying Lagrangian particles, the so-called superdroplets. These are either unactivated CCN or cloud droplets that grow from activated CCN. The model accounts for the addition of environmental CCN into the cloud by entraining eddies at the cloud edge. Turbulent mixing of the entrained dry air with cloudy air is described using the classical linear relaxation to the mean model. We show that turbulence plays an important role in aiding entrained CCN to activate, and thus broadening the droplet size distribution. These findings are consistent with previous large-eddy simulations (LESs) that consider the impact of variable droplet growth histories on the droplet size spectra in small cumuli. The scheme developed in this work is ready to be used as a stochastic subgrid-scale scheme in LESs of natural clouds.

scholarly journals Overview of the Mount Tai Experiment (MTX2006) in central East China in June 2006: studies of significant regional air pollution

2013 ◽  
Vol 13 (16) ◽  
pp. 8265-8283 ◽  
Author(s):  
Y. Kanaya ◽  
H. Akimoto ◽  
Z.-F. Wang ◽  
P. Pochanart ◽  
K. Kawamura ◽  
...  
Keyword(s):  
Air Pollution ◽  
Regional Climate ◽  
Regional Scale ◽  
Photochemical Activity ◽  
East China ◽  
Strong Impact ◽  
Source Attribution ◽  
Annual Variations ◽  
Photochemical Aging ◽  
Regional Air Pollution

Abstract. We conducted an intensive field campaign at the summit of Mt. Tai (36.26° N, 117.11° E, 1534 m above sea level), Shandong Province, located at the center of central East China, during the period 28 May to 30 June 2006, to study seasonal maxima of regional air pollution with respect to ozone (O3) and aerosols. The specific objectives, campaign design, and major findings are summarized. High concentrations of O3 and its precursors, and aerosols, were detected and studied in the context of annual variations. Most importantly, we identified that emissions from regional-scale open crop residue burning after the harvesting of winter wheat, together with photochemical aging, strongly increased the concentrations of O3, aerosols, and primary pollutants in this month of year. Studies of in situ photochemical activity, regional source attribution of O3, O3–aerosol interactions, validation of satellite observations of tropospheric NO2, behaviors of volatile organic compounds and organic/inorganic aerosol species, loss rates of black carbon (BC), and instrument inter-comparisons are also summarized. The observed BC levels must have a strong impact on the regional climate.

scholarly journals Inclusion of biomass burning in WRF-Chem: impact of wildfires on weather forecasts

2011 ◽  
Vol 11 (11) ◽  
pp. 5289-5303 ◽  
Author(s):  
G. Grell ◽  
S. R. Freitas ◽  
M. Stuefer ◽  
J. Fast
Keyword(s):  
Biomass Burning ◽  
Cloud Model ◽  
Cloud Condensation Nuclei ◽  
Cloud Microphysics ◽  
Fire Season ◽  
Strong Impact ◽  
Emission Rates ◽  
Weather Forecasts ◽  
High Concentrations ◽  
The Impact

Abstract. A plume rise algorithm for wildfires was included in WRF-Chem, and applied to look at the impact of intense wildfires during the 2004 Alaska wildfire season on weather simulations using model resolutions of 10 km and 2 km. Biomass burning emissions were estimated using a biomass burning emissions model. In addition, a 1-D, time-dependent cloud model was used online in WRF-Chem to estimate injection heights as well as the vertical distribution of the emission rates. It was shown that with the inclusion of the intense wildfires of the 2004 fire season in the model simulations, the interaction of the aerosols with the atmospheric radiation led to significant modifications of vertical profiles of temperature and moisture in cloud-free areas. On the other hand, when clouds were present, the high concentrations of fine aerosol (PM2.5) and the resulting large numbers of Cloud Condensation Nuclei (CCN) had a strong impact on clouds and cloud microphysics, with decreased precipitation coverage and precipitation amounts during the first 12 h of the integration. During the afternoon, storms were of convective nature and appeared significantly stronger, probably as a result of both the interaction of aerosols with radiation (through an increase in CAPE) as well as the interaction with cloud microphysics.

Sign in / Sign up

Export Citation Format

Share Document