Tidal-librational dissipation within volcanic and cryovolcanic worlds

Author(s):  
Antony Trinh ◽  
Isamu Matsuyama

<p>Tidal dissipation is thought to power volcanism or cryovolcanism on a number of moons, most notably Io and Enceladus. The amount and distribution of tidal heating within the moon are however still misunderstood, and intricately related to surface observations like heat flow and distribution of volcanic activity. From an extensive benchmark between a set of numerical and semi-analytical models, we show that, in the presence of a subsurface (magma or water) ocean, librations (i.e. spin rate variations) along the orbit trigger additional deformation mechanisms, enhancing the amount of dissipation compared to traditional tidal dissipation (by at least 25% for Enceladus), and affecting the distribution of dissipation within the moon. We illustrate these mechanisms with numerous animations, and identify librational loading as the most relevant process.</p>

The most precise way of estimating the dissipation of tidal energy in the oceans is by evaluating the rate at which work is done by the tidal forces and this quantity is completely described by the fundamental harmonic in the ocean tide expansion that has the same degree and order as the forcing function. The contribution of all other harmonics to the work integral must vanish. These harmonics have been estimated for the principal M 2 tide using several available numerical models and despite the often significant difference in the detail of the models, in the treatment of the boundary conditions and in the way dissipating forces are introduced, the results for the rate at which energy is dissipated are in good agreement. Equivalent phase lags, representing the global ocean-solid Earth response to the tidal forces and the rates of energy dissipation have been computed for other tidal frequencies, including the atmospheric tide, by using available tide models, age of tide observations and equilibrium theory. Orbits of close Earth satellites are periodically perturbed by the combined solid Earth and ocean tide and the delay of these perturbations compared with the tide potential defines the same terms as enter into the tidal dissipation problem. They provide, therefore, an independent estimate of dissipation. The results agree with the tide calculations and with the astronomical estimates. The satellite results are independent of dissipation in the Moon and a comparison of astronomical, satellite and tidal estimates of dissipation permits a separation of energy sinks in the solid Earth, the Moon and in the oceans. A precise separation is not yet possible since dissipation in the oceans dominates the other two sinks: dissipation occurs almost exclusively in the oceans and neither the solid Earth nor the Moon are important energy sinks. Lower limits to the Q of the solid Earth can be estimated by comparing the satellite results with the ocean calculations and by comparing the astronomical results with the latter. They result in Q > 120. The lunar acceleration n , the Earth’s tidal acceleration O T and the total rate of energy dissipation E estimated by the three methods give astronomical based estimate —1.36 —28±3 —7.2 ± 0.7 4.1±0.4 satellite based estimate —1.03 —24 ±5 — 6.4 ± 1.5 3.6±0.8 numerical tide model — 1.49 —30 ±3 —7.5± 0.8 4.5±0.5 The mean value for O T corresponds to an increase in the length of day of 2.7 ms cy -1 . The non-tidal acceleration of the Earth is (1.8 ± 1.0) 10 -22 s ~2 , resulting in a decrease in the length of day of 0.7 ± 0.4 ms cy -1 and is barely significant. This quantity remains the most unsatisfactory of the accelerations. The nature of the dissipating mechanism remains unclear but whatever it is it must also control the phase of the second degree harmonic in the ocean expansion. It is this harmonic that permits the transfer of angular momentum from the Earth to the Moon but the energy dissipation occurs at frequencies at the other end of the tide’s spatial spectrum. The efficacity of the break-up of the second degree term into the higher modes governs the amount of energy that is eventually dissipated. It appears that the break-up is controlled by global ocean characteristics such as the ocean­-continent geometry and sea floor topography. Friction in a few shallow seas does not appear to be as important as previously thought: New estimates for dissipation in the Bering Sea being almost an order of magnitude smaller than earlier estimates. If bottom friction is important then it must be more uniformly distributed over the world's continental shelves. Likewise, if turbulence provides an important dissipation mechanism it must be fairly uniformly distributed along, for example, coastlines or along continental margins. Such a global distribution of the dissipation makes it improbable that there has been a change in the rate of dissipation during the last few millennium as there is no evidence of changes in ocean volume, or ocean geometry or sea level beyond a few metres. It also suggests that the time scale problem can be resolved if past ocean-continent geometries led to a less efficient breakdown of the second degree harmonic into higher degree harmonics.


2021 ◽  
Vol 2 (6) ◽  
pp. 232
Author(s):  
Isamu Matsuyama ◽  
Antony Trinh ◽  
James T. Keane

Abstract The present ellipsoidal figure of the Moon requires a deformation that is significantly larger than the hydrostatic deformation in response to the present rotational and tidal potentials. This has long been explained as due to a fossil rotational and tidal deformation from a time when the Moon was closer to Earth. Previous studies constraining the orbital parameters at the time the fossil deformation was established find that high orbit eccentricities (e ≳ 0.2) are required at this ancient time, which is difficult to reconcile with the freezing of a fossil figure owing to the expected large tidal heating. We extend previous fossil deformation studies in several ways. First, we consider the effect of removing South Pole−Aitken (SPA) contributions from the present observed deformation using a nonaxially symmetric SPA model. Second, we use the assumption of an equilibrium Cassini state as an additional constraint, which allows us to consider the fossil deformation due to nonzero obliquity self-consistently. A fossil deformation established during Cassini state 1, 2, or 4 is consistent with the SPA-corrected present deformation. However, a fossil deformation established during Cassini state 2 or 4 requires large obliquity and orbit eccentricity (ϵ ∼ 68° and e ∼ 0.65), which are difficult to reconcile with the corresponding strong tidal heating. The most likely explanation is a fossil deformation established during Cassini state 1, with a small obliquity (ϵ ∼ −0.2°) and an orbit eccentricity range that includes zero eccentricity (0 ≤ e ≲ 0.3).


2014 ◽  
Vol 13 (4) ◽  
pp. 324-336 ◽  
Author(s):  
Takashi Sasaki ◽  
Jason W. Barnes

AbstractWe consider tidal decay lifetimes for moons orbiting habitable extrasolar planets using the constant Q approach for tidal evolution theory. Large moons stabilize planetary obliquity in some cases, and it has been suggested that large moons are necessary for the evolution of complex life. We find that the Moon in the Sun–Earth system must have had an initial orbital period of not slower than 20 h rev−1 for the moon's lifetime to exceed a 5 Gyr lifetime. We assume that 5 Gyr is long enough for life on planets to evolve complex life. We show that moons of habitable planets cannot survive for more than 5 Gyr if the stellar mass is less than 0.55 and 0.42 M⊙ for Qp=10 and 100, respectively, where Qp is the planetary tidal dissipation quality factor. Kepler-62e and f are of particular interest because they are two actually known rocky planets in the habitable zone. Kepler-62e would need to be made of iron and have Qp=100 for its hypothetical moon to live for longer than 5 Gyr. A hypothetical moon of Kepler-62f, by contrast, may have a lifetime greater than 5 Gyr under several scenarios, and particularly for Qp=100.


1963 ◽  
Vol 68 (17) ◽  
pp. 4959-4965 ◽  
Author(s):  
William M. Kaula
Keyword(s):  
The Moon ◽  

2014 ◽  
Vol 7 (8) ◽  
pp. 569-572 ◽  
Author(s):  
Yuji Harada ◽  
Sander Goossens ◽  
Koji Matsumoto ◽  
Jianguo Yan ◽  
Jinsong Ping ◽  
...  

Eos ◽  
2022 ◽  
Vol 103 ◽  
Author(s):  
Jure Japelj

Tidal heating may have raised the surface temperature of early Earth and triggered global volcanism, a new study says.


2019 ◽  
Vol 491 (2) ◽  
pp. 2520-2535 ◽  
Author(s):  
Xi Kang

ABSTRACT Theoretical studying of the very inner structure of faint satellite galaxy requires very high-resolution hydro-dynamical simulations with realistic model for star formation, which are beginning to emerge recently. In this work, we present an analytical description to model the inner kinematic of satellites in the Milky Way (MW). We use a Monte Carlo method to produce merger trees for MW mass halo and analytical models to produce stellar mass in the satellite galaxies. We consider two important processes which can significantly modify the inner mass distribution in satellite galaxy. The first is baryonic feedback which can induce a flat inner profile depending on the star formation efficiency in the galaxy. The second is the tidal stripping to reduce and re-distribute the mass inside satellite. We apply this model to MW satellite galaxies in both CDM and thermal relic WDM models. It is found that tidal heating must be effective to produce a relatively flat distribution of the satellite circular velocities, to agree with the data. The constraint on WDM mass depends on the host halo mass. For a MW halo with dark matter mass lower than $2\times 10^{12}\, \text{ M}_\odot$, a 2 keV WDM model can be safely excluded as the predicted satellite circular velocities are systematically lower than the data. For WDM with mass of 3.5 keV, it requires the MW halo mass to be larger than $1.5\times 10^{12}\, {\text{ M}}_{\odot }$.


Sign in / Sign up

Export Citation Format

Share Document