Numerical experiments with a parameterization of mires in the COSMO-D2 convection permitting limited-area numerical weather prediction framework

2020 ◽  
Author(s):  
Jürgen Helmert ◽  
Alla Yurova ◽  
Denis Blinov ◽  
Inna Rozinkina ◽  
Michael Baldauf ◽  
...  
Keyword(s):  
Numerical Weather Prediction ◽  
Numerical Experiments ◽  
Meteorological Parameters ◽  
Weather Prediction ◽  
Heat Diffusion ◽  
Limited Area ◽  
Lower Boundary Condition ◽  
Numerical Weather ◽  
Screen Level ◽  
The Impact

<p>Europe - especially the northern and middle latitudes - is one of Earth’s mire-rich regions. Among the main distribution areas for mires in Central Europe the coastal region along the southeastern corner of the North Sea (Frisia) shows the highest density of mires. Despite of the important role of mires acting as a carbon sink and modifying the Bowen ratio with influence on screen level meteorological parameters their adequate representation in land-surface schemes used in numerical weather prediction and climate models is still insufficient.</p><p>With the recent version 5.06 the COSMO model (Baldauf et al., 2017) offers a parameterization of mires based on Yurova et al. (2014). In this approach the heat diffusion in the vertical domain of the soil multilayer model TERRA is considered with modified equations describing the thermal conductivity for peat with given water/ice contents. The mire hydrology is parameterized by the solution of the Richard's equation in the vertical domain extended by the formulation of a lower boundary condition as a climatological layer of permanent saturation used to simulate the water table position, in conjunction with a mire‐specific evapotranspiration and runoff parameterization.</p><p>The impact of the mire parameterization on screen level meteorological parameters and mesoscale processes was investigated in two numerical experiments with COSMO-D2 in a convection permitting limited-area numerical weather prediction (NWP) framework for summer 2018 and winter 2018/2019.</p><p>We will present results from the objective verification system and discuss the impact of geospatial physiographic data for an improved representation of mires in the NWP framework.</p>

scholarly journals Sensitivity of Radiative Fluxes to Aerosols in the ALADIN-HIRLAM Numerical Weather Prediction System

Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 205
Author(s):  
Laura Rontu ◽  
Emily Gleeson ◽  
Daniel Martin Perez ◽  
Kristian Pagh Nielsen ◽  
Velle Toll
Keyword(s):  
Optical Properties ◽  
Real Time ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Limited Area ◽  
Prediction System ◽  
Heating Rates ◽  
Radiative Fluxes ◽  
Numerical Weather ◽  
The Impact

The direct radiative effect of aerosols is taken into account in many limited-area numerical weather prediction models using wavelength-dependent aerosol optical depths of a range of aerosol species. We studied the impact of aerosol distribution and optical properties on radiative transfer, based on climatological and more realistic near real-time aerosol data. Sensitivity tests were carried out using the single-column version of the ALADIN-HIRLAM numerical weather prediction system, set up to use the HLRADIA simple broadband radiation scheme. The tests were restricted to clear-sky cases to avoid the complication of cloud–radiation–aerosol interactions. The largest differences in radiative fluxes and heating rates were found to be due to different aerosol loads. When the loads are large, the radiative fluxes and heating rates are sensitive to the aerosol inherent optical properties and the vertical distribution of the aerosol species. In such cases, regional weather models should use external real-time aerosol data for radiation parametrizations. Impacts of aerosols on shortwave radiation dominate longwave impacts. Sensitivity experiments indicated the important effects of highly absorbing black carbon aerosols and strongly scattering desert dust.

scholarly journals Sensitivity of Radiative Fluxes to Aerosols in the ALADIN-HIRLAM Numerical Weather Prediction System

2020 ◽  
Author(s):  
Laura Rontu ◽  
Emily Gleeson ◽  
Daniel Martin Perez ◽  
Kristian Pagh Nielsen ◽  
Velle Toll
Keyword(s):  
Optical Properties ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Limited Area ◽  
Prediction System ◽  
Heating Rates ◽  
Radiative Fluxes ◽  
Numerical Weather ◽  
The Impact

The direct radiative effect of aerosols is taken into account in many limited area numerical weather prediction models using wavelength-dependent aerosol optical depths of a range of aerosol species. We study the impact of aerosol distribution and optical properties on radiative transfer, based on climatological and more realistic near real-time aerosol data. Sensitivity tests were carried out using the single column version of the ALADIN-HIRLAM numerical weather prediction system, set up to use the HLRADIA broadband radiation scheme. The tests were restricted to clear-sky cases to avoid the complication of cloud-radiation-aerosol interactions. The largest differences in radiative fluxes and heating rates were found to be due to different aerosol loads. When the loads are large, the radiative fluxes and heating rates are sensitive to the aerosol inherent optical properties and vertical distribution of the aerosol species. Impacts of aerosols on shortwave radiation dominate longwave impacts. Sensitivity experiments indicated the important effects of highly absorbing black carbon aerosols and strongly scattering desert dust.

scholarly journals The impact of periodization methods on the kinetic energy spectra for limited-area numerical weather prediction models

2014 ◽  
Vol 7 (5) ◽  
pp. 6489-6518
Author(s):  
V. Blažica ◽  
N. Gustafsson ◽  
N. Žagar
Keyword(s):  
Kinetic Energy ◽  
Discrete Cosine Transform ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Limited Area ◽  
Cosine Transform ◽  
Numerical Weather ◽  
Extension Zone ◽  
The Impact

Abstract. The paper deals with the comparison of the most common periodization methods used to obtain spectral fields of limited-area models for numerical weather prediction. The focus is on the impact the methods have on the spectra of the fields, which are used for verification and tuning of the models. A simplified model is applied with random fields that obey a known kinetic energy spectrum. The periodization methods under consideration are detrending, the discrete cosine transform and the application of an extension zone. For extension zone, three versions are applied: the Boyd method, the ALADIN method and the HIRLAM method. The results show that detrending and the discrete cosine transform have little impact on the spectra, as does the Boyd method for extension zone. For the ALADIN and HIRLAM methods, the impact depends on the width of the extension zone – the wider the zone, the more artificial energy and the larger impact on the spectra. The width of the extension zone correlates to the modifications in the shape of the spectra as well as to the amplitudes of the additional energy in the spectra.

scholarly journals Impact of Doppler Radar Wind Observations on Australian High-Resolution Numerical Weather Prediction

2020 ◽  
Vol 35 (2) ◽  
pp. 309-324
Author(s):  
Susan Rennie ◽  
Lawrence Rikus ◽  
Nathan Eizenberg ◽  
Peter Steinle ◽  
Monika Krysta
Keyword(s):  
High Resolution ◽  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Doppler Radar ◽  
Weather Prediction ◽  
Limited Area ◽  
Observation Error ◽  
Numerical Weather ◽  
Skill Scores ◽  
The Impact

Abstract The impact of Doppler radar wind observations on forecasts from a developmental, high-resolution numerical weather prediction (NWP) system is assessed. The new 1.5-km limited-area model will be Australia’s first such operational NWP system to include data assimilation. During development, the assimilation of radar wind observations was trialed over a 2-month period to approve the initial inclusion of these observations. Three trials were run: the first with no radar data, the second with radial wind observations from precipitation echoes, and the third with radial winds from both precipitation and insect echoes. The forecasts were verified against surface observations from automatic weather stations, against rainfall accumulations using fractions skill scores, and against satellite cloud observations. These methods encompassed verification across a range of vertical levels. Additionally, a case study was examined more closely. Overall results showed little statistical difference in skill between the trials, and the net impact was neutral. While the new observations clearly affected the forecast, the objective and subjective analyses showed a neutral impact on the forecast overall. As a first step, this result is satisfactory for the operational implementation. In future, upgrades to the radar network will start to reduce the observation error, and further improvements to the data assimilation are planned, which may be expected to improve the impact.

scholarly journals The use of GNSS zenith total delays in operational AROME/Hungary 3D-Var over a central European domain

2019 ◽  
Vol 12 (3) ◽  
pp. 1569-1579 ◽  
Author(s):  
Máté Mile ◽  
Patrik Benáček ◽  
Szabolcs Rózsa
Keyword(s):  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Bias Correction ◽  
Weather Prediction ◽  
Added Value ◽  
Limited Area ◽  
Central European ◽  
Numerical Weather ◽  
The Impact ◽  
Assimilation Scheme

Abstract. The delay of satellite signals broadcasted by Global Navigation Satellite System (GNSS) provides unique atmospheric observations which endorse numerical weather prediction from global to limited-area models. Due to the possibility of its frequent and near-real-time estimation, the zenith total delays (ZTDs) are valuable information for any state-of-the-art data assimilation system. This article introduces the data assimilation of ZTDs in a Hungarian numerical weather prediction system, which was carried out by taking into account observations from central European GNSS analysis and processing centres. The importance of ZTD observations is described and shown by a diagnostic tool in the 3-hourly updated 3D-Var assimilation scheme. Furthermore, observing system experiments are done to evaluate the impact of GNSS ZTDs on mesoscale limited-area forecasts. The results of the use of GNSS ZTDs showed a clear added value to improve screen-level temperature and humidity forecasts when the bias is accurately estimated and corrected in the data assimilation scheme. The importance of variational, i.e. adaptive bias correction, is highlighted by verification scores compared to static bias correction. Moreover, this paper reviews the quality control of GNSS ground-based stations inside the central European domain, the calculation of optimal thinning distance and the preparation of the two above-mentioned bias correction methods. Finally, conclusions are drawn on different settings of the forecast and analysis experiments with a brief future outlook.

scholarly journals Evaluating the use of Aeolus satellite observations in the regional numerical weather prediction (NWP) model Harmonie–Arome

2021 ◽  
Vol 14 (9) ◽  
pp. 5925-5938
Author(s):  
Susanna Hagelin ◽  
Roohollah Azad ◽  
Magnus Lindskog ◽  
Harald Schyberg ◽  
Heiner Körnich
Keyword(s):  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Limited Area ◽  
Horizontal Line ◽  
Observation Error ◽  
Numerical Weather ◽  
Potential Improvement ◽  
Nwp Model ◽  
The Impact

Abstract. The impact of using wind observations from the Aeolus satellite in a limited-area numerical weather prediction (NWP) system is being investigated using the limited-area NWP model Harmonie–Arome over the Nordic region. We assimilate the horizontal line-of-sight (HLOS) winds observed by Aeolus using 3D-Var data assimilation for two different periods, one in September–October 2018 when the satellite was recently launched and a later period in April–May 2020 to investigate the updated data processing of the HLOS winds. We find that the quality of the Aeolus observations has degraded between the first and second experiment period over our domain. However, observations from Aeolus, in particular the Mie winds, have a clear impact on the analysis of the NWP model for both periods, whereas the forecast impact is neutral when compared against radiosondes. Results from evaluation of observation minus background and observation minus analysis departures based on Desroziers diagnostics show that the observation error should be increased for Aeolus data in our experiments, but the impact of doing so is small. We also see that there is potential improvement in using 4D-Var data assimilation, which generates flow-dependent analysis increments, with the Aeolus data.

scholarly journals The impact of periodization methods on the kinetic energy spectra for limited-area numerical weather prediction models

2015 ◽  
Vol 8 (1) ◽  
pp. 87-97 ◽  
Author(s):  
V. Blažica ◽  
N. Gustafsson ◽  
N. Žagar
Keyword(s):  
Kinetic Energy ◽  
Discrete Cosine Transform ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Limited Area ◽  
Cosine Transform ◽  
Numerical Weather ◽  
Extension Zone ◽  
The Impact

Abstract. The paper deals with the comparison of the most common periodization methods used to obtain spectral fields of limited-area models for numerical weather prediction. The focus is on the impact that the methods have on the spectra of the fields, which are used for verification and tuning of the models. A simplified model is applied with random fields that obey a known kinetic energy spectrum. The periodization methods under consideration are detrending, the discrete cosine transform and the application of an extension zone. For the extension zone, three versions are applied: the Boyd method, the ALADIN method and the HIRLAM method. The results show that detrending and the discrete cosine transform have little impact on the spectra, as does the Boyd method for extension zone. For the ALADIN and HIRLAM methods, the impact depends on the width of the extension zone – the wider the zone, the more artificial energy and the larger impact on the spectra. The width of the extension zone correlates to the modifications in the shape of the spectra as well as to the amplitudes of the additional energy in the spectra.

scholarly journals Understanding the model representation of clouds based on visible and infrared satellite observations

2021 ◽  
Vol 21 (16) ◽  
pp. 12273-12290
Author(s):  
Stefan Geiss ◽  
Leonhard Scheck ◽  
Alberto de Lozar ◽  
Martin Weissmann
Keyword(s):  
Numerical Weather Prediction ◽  
Satellite Images ◽  
Prediction Models ◽  
Weather Prediction ◽  
Satellite Observations ◽  
Limited Area ◽  
Infrared Observation ◽  
Numerical Weather ◽  
The Impact ◽  
Forward Operator

Abstract. There is a rising interest in improving the representation of clouds in numerical weather prediction models. This will directly lead to improved radiation forecasts and, thus, to better predictions of the increasingly important production of photovoltaic power. Moreover, a more accurate representation of clouds is crucial for assimilating cloud-affected observations, in particular high-resolution observations from instruments on geostationary satellites. These observations can also be used to diagnose systematic errors in the model clouds, which are influenced by multiple parameterisations with many, often not well-constrained, parameters. In this study, the benefits of using both visible and infrared satellite channels for this purpose are demonstrated. We focus on visible and infrared Meteosat SEVIRI (Spinning Enhanced Visible InfraRed Imager) images and their model equivalents computed from the output of the ICON-D2 (ICOsahedral Non-hydrostatic, development version based on version 2.6.1; Zängl et al., 2015) convection-permitting, limited area numerical weather prediction model using efficient forward operators. We analyse systematic deviations between observed and synthetic satellite images derived from semi-free hindcast simulations for a 30 d summer period with strong convection. Both visible and infrared satellite observations reveal significant deviations between the observations and model equivalents. The combination of infrared brightness temperature and visible reflectance facilitates the attribution of individual deviations to specific model shortcomings. Furthermore, we investigate the sensitivity of model-derived visible and infrared observation equivalents to modified model and visible forward operator settings to identify dominant error sources. Estimates of the uncertainty of the visible forward operator turned out to be sufficiently low; thus, it can be used to assess the impact of model modifications. Results obtained for various changes in the model settings reveal that model assumptions on subgrid-scale water clouds are the primary source of systematic deviations in the visible satellite images. Visible observations are, therefore, well-suited to constrain subgrid cloud settings. In contrast, infrared channels are much less sensitive to the subgrid clouds, but they can provide information on errors in the cloud-top height.

Impact of Consistent Semi-Lagrangian Trajectory Calculations on Numerical Weather Prediction Performance

2017 ◽  
Vol 145 (10) ◽  
pp. 4127-4150 ◽  
Author(s):  
Syed Zahid Husain ◽  
Claude Girard
Keyword(s):  
Numerical Weather Prediction ◽  
Numerical Experiments ◽  
Prediction Models ◽  
Weather Prediction ◽  
Forecast Accuracy ◽  
Multiscale Model ◽  
Dynamical Equations ◽  
Numerical Weather ◽  
Trajectory Calculation ◽  
Trajectory Calculations

Inconsistencies may arise in numerical weather prediction models—that are based on semi-Lagrangian advection—when the governing dynamical and the kinematic trajectory equations are discretized in a dissimilar manner. This study presents consistent trajectory calculation approaches, both in the presence and absence of off-centering in the discretized dynamical equations. Both uniform and differential off-centering in the discretized dynamical equations have been considered. The proposed consistent trajectory calculations are evaluated using numerical experiments involving a nonhydrostatic two-dimensional theoretical mountain case and hydrostatic global forecasts. The experiments are carried out using the Global Environmental Multiscale model. Both the choice of the averaging method for approximating the velocity integral in the discretized trajectory equations and the interpolation scheme for calculating the departure positions are found to be important for consistent trajectory calculations. Results from the numerical experiments confirm that the proposed consistent trajectory calculation approaches not only improve numerical consistency, but also improve forecast accuracy.

scholarly journals On the Impact of Unmanned Aerial System Observations on Numerical Weather Prediction in the Coastal Zone

2018 ◽  
Vol 146 (2) ◽  
pp. 599-622 ◽  
Author(s):  
David D. Flagg ◽  
James D. Doyle ◽  
Teddy R. Holt ◽  
Daniel P. Tyndall ◽  
Clark M. Amerault ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Research Laboratory ◽  
Weather Prediction ◽  
Ocean Model ◽  
Naval Research ◽  
Unmanned Aerial System ◽  
Numerical Weather ◽  
The Impact

Abstract The Trident Warrior observational field campaign conducted off the U.S. mid-Atlantic coast in July 2013 included the deployment of an unmanned aerial system (UAS) with several payloads on board for atmospheric and oceanic observation. These UAS observations, spanning seven flights over 5 days in the lowest 1550 m above mean sea level, were assimilated into a three-dimensional variational data assimilation (DA) system [the Naval Research Laboratory Atmospheric Variational Data Assimilation System (NAVDAS)] used to generate analyses for a numerical weather prediction model [the Coupled Ocean–Atmosphere Mesoscale Prediction System (COAMPS)] with a coupled ocean model [the Naval Research Laboratory Navy Coastal Ocean Model (NCOM)]. The impact of the assimilated UAS observations on short-term atmospheric prediction performance is evaluated and quantified. Observations collected from 50 radiosonde launches during the campaign adjacent to the UAS flight paths serve as model forecast verification. Experiments reveal a substantial reduction of model bias in forecast temperature and moisture profiles consistently throughout the campaign period due to the assimilation of UAS observations. The model error reduction is most substantial in the vicinity of the inversion at the top of the model-estimated boundary layer. Investigations reveal a consistent improvement to prediction of the vertical position, strength, and depth of the boundary layer inversion. The relative impact of UAS observations is explored further with experiments of systematic denial of data streams from the NAVDAS DA system and removal of individual measurement sources on the UAS platform.

Sign in / Sign up

Export Citation Format

Share Document