Lake Mead and Hoover Dam monitoring in Nevada and Arizona states, USA using InSAR

2020 ◽  
Author(s):  
Mehdi Darvishi ◽  
Georgia Destouni ◽  
Fernando Jaramillo
Keyword(s):  
Los Angeles ◽  
Water Level ◽  
Land Surface ◽  
Ground Deformation ◽  
The United States ◽  
Water Levels ◽  
Lake Mead ◽  
Water Level Changes ◽  
Hoover Dam ◽  
The Impact

<p>Man-made reservoirs and lakes are key elements in the terrestrial water system. The increased concern about the impact of anthropogenic interventions on and the dynamics of these water resources has given rise to various approaches for representing human-water interactions in land surface models. Synthetic aperture radar interferometry (InSAR) has become a powerful geodetic tool for this purpose, by evidencing changes of ground and water surfaces across time and space. In this research, the Lake Mead and associated Hoover Dam are studied using Small Baseline Subset (SBAS) technique. Lake Mead is the largest reservoir in the United States, in terms of water capacity, supplies water and hydropower for millions of people in Las Vegas, Los Angeles and southwestern part of the USA. In recent years, rising temperature, increasing evaporation and decreasing precipitation have decreased water levels substantially, and probably modified its surrounding groundwater and surface as well.</p><p>This study aims to identify a hydrology-induced ground deformation around the lake Mead and a probable Hoover dam movement displacement. For the reservoir, we used the SBAS technique using 138 SAR data, including ERS1/2, Envisat, ALOS PALSAR and Sentinel-1, covering a time-spam between 1995 and 2019. For the analysis on the dam, we used the SBAS technique from 2014 to 2019 with descending and ascending modes of Sentinel-1A/B imageries. We found two main deformation patterns around the lake associated with the water level changes. Firstly, ERS and Sentinel-1 data evidenced a ground deformation that manifested itself as as a subsidence pattern in 1995 that has gradually changed into an uplift up to 2019. Secondly, the correlation trend between the deformation and water level changes has changed from negative to positive, with a transition point around March 2008. A possible interpretation for this is that the ground has initially reacted to the water fluctuations in the reservoir before March 2008 but after no longer plays a dominant role in the deformation occurring around the lake. The findings will help us to have a better understanding over the changes happened around the lake due to the water level changes and provide the valuable information for more effective management and maintenance of hydraulic structures and facilities near by the lake and water control in the future.</p>

scholarly journals Changing Water Levels in Lake Superior, MI (USA) Impact Periphytic Diatom Assemblages in the Keweenaw Peninsula

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 253
Author(s):  
M. Megan Woller-Skar ◽  
Alexandra Locher ◽  
Ellen Audia ◽  
Evan W. Thomas
Keyword(s):  
Water Level ◽  
Surface Area ◽  
Lake Superior ◽  
Water Levels ◽  
Ecological Processes ◽  
Periphyton Community ◽  
Water Level Changes ◽  
Community Assemblages ◽  
Keweenaw Peninsula ◽  
The Impact

Predicted climate-induced changes in the Great Lakes include increased variability in water levels, which may shift periphyton habitat. Our goal was to determine the impacts of water level changes in Lake Superior on the periphyton community assemblages in the Keweenaw Peninsula with different surface geology. At three sites, we identified periphyton assemblages as a function of depth, determined surface area of periphyton habitat using high resolution bathymetry, and estimated the impact of water level changes in Lake Superior on periphyton habitat. Our results suggest that substrate geology influences periphyton community assemblages in the Keweenaw Peninsula. Using predicted changes in water levels, we found that a decrease in levels of 0.63 m resulted in a loss of available surface area for periphyton habitat by 600 to 3000 m2 per 100 m of shoreline with slopes ranging 2 to 9°. If water levels rise, the surface area of substrate will increase by 150 to 370 m2 per 100 m of shoreline, as the slopes above the lake levels are steeper (8–20°). Since periphyton communities vary per site, changes in the surface area of the substrate will likely result in a shift in species composition, which could alter the structure of aquatic food webs and ecological processes.

scholarly journals Multi-Sensor InSAR Assessment of Ground Deformations around Lake Mead and Its Relation to Water Level Changes

2021 ◽  
Vol 13 (3) ◽  
pp. 406
Author(s):  
Mehdi Darvishi ◽  
Georgia Destouni ◽  
Saeid Aminjafari ◽  
Fernando Jaramillo
Keyword(s):  
Water Level ◽  
Surface Deformation ◽  
Ground Deformation ◽  
Water Storage ◽  
Negative Relationship ◽  
Ground Surface ◽  
Subsurface Water ◽  
Lake Mead ◽  
Ground Deformations ◽  
Water Level Changes

Changes in subsurface water resources might alter the surrounding ground by generating subsidence or uplift, depending on geological and hydrogeological site characteristics. Improved understanding of the relationships between surface water storage and ground deformation is important for design and maintenance of hydraulic facilities and ground stability. Here, we construct one of the longest series of Interferometric Synthetic Aperture Radar (InSAR) to date, over twenty-five years, to study the relationships between water level changes and ground surface deformation in the surroundings of Lake Mead, United States, and at the site of the Hoover Dam. We use the Small Baseline Subset (SBAS) and Permanent scatterer interferometry (PSI) techniques over 177 SAR data, encompassing different SAR sensors including ERS1/2, Envisat, ALOS (PALSAR), and Sentinel-1(S1). We perform a cross-sensor examination of the relationship between water level changes and ground displacement. We found a negative relationship between water level change and ground deformation around the reservoir that was consistent across all sensors. The negative relationship was evident from the long-term changes in water level and deformation occurring from 1995 to 2014, and also from the intra-annual oscillations of the later period, 2014 to 2019, both around the reservoir and at the dam. These results suggest an elastic response of the ground surface to changes in water storage in the reservoir, both at the dam site and around the reservoir. Our study illustrates how InSAR-derived ground deformations can be consistent in time across sensors, showing the potential of detecting longer time-series of ground deformation.

scholarly journals Visualization of Lake Mead Surface Area Changes from 1972 to 2009

2021 ◽  
Author(s):  
K. Wayne Forsythe ◽  
Barbara Schatz ◽  
Stephen J. Swales ◽  
Lisa-Jen Ferrato ◽  
David M. Atkinson
Keyword(s):  
United States ◽  
Water Level ◽  
Surface Area ◽  
Satellite Images ◽  
Strong Relationship ◽  
The United States ◽  
Water Levels ◽  
Lake Area ◽  
Lake Mead ◽  
Landsat Satellite

For most of the last decade, the south-western portion of the United States has experienced a severe and enduring drought. This has caused serious concerns about water supply and management in the region. In this research, 30 orthorectified Landsat satellite images from the United States Geological Service (USGS) Earth Explorer archive were analyzed for the 1972 to 2009 period. The images encompassed Lake Mead (a major reservoir in this region) and were examined for changes in water surface area. Decadal lake area minimums/maximums were achieved in 1972/1979, 1981/1988, 1991/1998, and 2009/2000. The minimum lake area extent occurred in 2009 (356.4 km2), while the maximum occurred in 1998 (590.6 km2). Variable trends in water level and lake area were observed throughout the analysis period, however progressively lower values were observed since 2000. The Landsat derived lake areas show a very strong relationship with actual measured water levels at the Hoover Dam. Yearly water level variations at the dam vary minimally from the satellite derived estimates. A complete (yearly) record of satellite images may have helped to reduce the slight deviations in the time series.

scholarly journals Global Estimation and Assessment of Monthly Lake/Reservoir Water Level Changes Using ICESat-2 ATL13 Products

2021 ◽  
Vol 13 (14) ◽  
pp. 2744
Author(s):  
Nan Xu ◽  
Huiying Zheng ◽  
Yue Ma ◽  
Jian Yang ◽  
Xinyuan Liu ◽  
...  
Keyword(s):  
Water Level ◽  
The United States ◽  
Water Levels ◽  
Reservoir Water ◽  
Reservoir Water Level ◽  
Inland Water ◽  
Water Level Changes ◽  
Global Estimation ◽  
Water Surfaces ◽  
Lakes And Reservoirs

Accurate and detailed information on lake/reservoir water levels and temporal changes around the globe is urgently required for water resource management and related studies. The traditional satellite radar altimeters normally monitor water level changes of large lakes and reservoirs (i.e., greater than 1 km2) around the world. Fortunately, the recent Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) makes it possible to monitor water level changes for some small lakes and reservoirs (i.e., less than 1 km2). ICESat-2 ATL13 products provide observations of inland water surface heights, which are suitable for water level estimation at a global scale. In this study, ICESat-2 ATL13 products were used to conduct a global estimation and assessment of lake/reservoir water level changes. We produced monthly water levels for 13,843 lakes and reservoirs with areas greater than 0.1 km2 and all-season ATL13 products across the globe, in which 2257 targets are smaller than 1 km2. In total, the average valid number of months covered by ICESat-2 is 5.41 months and only 204 of 13,843 lakes and reservoirs have water levels in all the months in 2019. In situ water level data from 21 gauge stations across the United States and 12 gauge stations across Australia were collected to assess the monthly lake/reservoir water levels, which exhibited a high accuracy (RMSE = 0.08 m, r = 0.999). According to comparisons between the monthly water levels and changes from ATL08 products in another study and ATL13 products in this study, we found that both products can accurately estimate the monthly water level of lakes and reservoirs, but water levels derived from ATL13 products exhibited a higher accuracy compared with water levels derived from ATL08 products (RMSE = 0.28 m, r = 0.999). In general, the ATL13 product is more convenient because the HydroLAKES mask of inland water bodies, the orthometric height (with respect to the EGM2008 geoid) of water surfaces, and several data quality parameters specific to water surfaces were involved in the ATL13 product.

scholarly journals Visualization of Lake Mead Surface Area Changes from 1972 to 2009

2021 ◽  
Author(s):  
K. Wayne Forsythe ◽  
Barbara Schatz ◽  
Stephen J. Swales ◽  
Lisa-Jen Ferrato ◽  
David M. Atkinson
Keyword(s):  
United States ◽  
Water Level ◽  
Surface Area ◽  
Satellite Images ◽  
Strong Relationship ◽  
The United States ◽  
Water Levels ◽  
Lake Area ◽  
Lake Mead ◽  
Landsat Satellite

For most of the last decade, the south-western portion of the United States has experienced a severe and enduring drought. This has caused serious concerns about water supply and management in the region. In this research, 30 orthorectified Landsat satellite images from the United States Geological Service (USGS) Earth Explorer archive were analyzed for the 1972 to 2009 period. The images encompassed Lake Mead (a major reservoir in this region) and were examined for changes in water surface area. Decadal lake area minimums/maximums were achieved in 1972/1979, 1981/1988, 1991/1998, and 2009/2000. The minimum lake area extent occurred in 2009 (356.4 km2), while the maximum occurred in 1998 (590.6 km2). Variable trends in water level and lake area were observed throughout the analysis period, however progressively lower values were observed since 2000. The Landsat derived lake areas show a very strong relationship with actual measured water levels at the Hoover Dam. Yearly water level variations at the dam vary minimally from the satellite derived estimates. A complete (yearly) record of satellite images may have helped to reduce the slight deviations in the time series.

scholarly journals Determining Extreme Still Water Levels for Design and Planning Purposes Incorporating Sea Level Rise: Sydney, Australia

Atmosphere ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 95
Author(s):  
Phil J. Watson
Keyword(s):  
Sea Level Rise ◽  
Water Level ◽  
Sea Level ◽  
Tide Gauge ◽  
Water Levels ◽  
Extreme Value Analysis ◽  
Tide Gauge Record ◽  
Value Analysis ◽  
Mean Sea Level ◽  
The Impact

This paper provides an Extreme Value Analysis (EVA) of the hourly water level record at Fort Denison dating back to 1915 to understand the statistical likelihood of the combination of high predicted tides and the more dynamic influences that can drive ocean water levels higher at the coast. The analysis is based on the Peaks-Over-Threshold (POT) method using a fitted Generalised Pareto Distribution (GPD) function to estimate extreme hourly heights above mean sea level. The analysis highlights the impact of the 1974 East Coast Low event and rarity of the associated measured water level above mean sea level at Sydney, with an estimated return period exceeding 1000 years. Extreme hourly predictions are integrated with future projections of sea level rise to provide estimates of relevant still water levels at 2050, 2070 and 2100 for a range of return periods (1 to 1000 years) for use in coastal zone management, design, and sea level rise adaptation planning along the NSW coastline. The analytical procedures described provide a step-by-step guide for practitioners on how to develop similar baseline information from any long tide gauge record and the associated limitations and key sensitivities that must be understood and appreciated in applying EVA.

scholarly journals The influence of long- and short-term volcanic strain on aquifer pressure: a case study from Soufrière Hills Volcano, Montserrat (W.I.)

2020 ◽  
Vol 223 (2) ◽  
pp. 1288-1303
Author(s):  
K Strehlow ◽  
J Gottsmann ◽  
A Rust ◽  
S Hautmann ◽  
B Hemmings
Keyword(s):  
Water Level ◽  
Pore Pressure ◽  
Crustal Deformation ◽  
Water Levels ◽  
Short Term ◽  
Soufriere Hills Volcano ◽  
Soufrière Hills Volcano ◽  
Water Level Changes ◽  
Soufriere Hills

Summary Aquifers are poroelastic bodies that respond to strain by changes in pore pressure. Crustal deformation due to volcanic processes induces pore pressure variations that are mirrored in well water levels. Here, we investigate water level changes in the Belham valley on Montserrat over the course of 2 yr (2004–2006). Using finite element analysis, we simulate crustal deformation due to different volcanic strain sources and the dynamic poroelastic aquifer response. While some additional hydrological drivers cannot be excluded, we suggest that a poroelastic strain response of the aquifer system in the Belham valley is a possible explanation for the observed water level changes. According to our simulations, the shallow Belham aquifer responds to a steadily increasing sediment load due to repeated lahar sedimentation in the valley with rising aquifer pressures. A wholesale dome collapse in May 2006 on the other hand induced dilatational strain and thereby a short-term water level drop in a deeper-seated aquifer, which caused groundwater leakage from the Belham aquifer and thereby induced a delayed water level fall in the wells. The system thus responded to both gradual and rapid transient strain associated with the eruption of Soufrière Hills Volcano (Montserrat). This case study gives field evidence for theoretical predictions on volcanic drivers behind hydrological transients, demonstrating the potential of hydrological data for volcano monitoring. Interrogation of such data can provide valuable constraints on stress evolution in volcanic systems and therefore complement other monitoring systems. The presented models and inferred results are conceptually applicable to volcanic areas worldwide.

scholarly journals The Role of Mean Sea Level Annual Cycle on Extreme Water Levels Along European Coastline

2020 ◽  
Vol 12 (20) ◽  
pp. 3419
Author(s):  
Tomás Fernández-Montblanc ◽  
Jesús Gómez-Enri ◽  
Paolo Ciavola
Keyword(s):  
Water Level ◽  
Sea Level ◽  
North Sea ◽  
Extreme Events ◽  
Annual Cycle ◽  
Coastal Flooding ◽  
Water Levels ◽  
Total Water ◽  
Mean Sea Level ◽  
The Impact

The knowledge of extreme total water levels (ETWLs) and the derived impact, coastal flooding and erosion, is crucial to face the present and future challenges exacerbated in European densely populated coastal areas. Based on 24 years (1993–2016) of multimission radar altimetry, this paper investigates the contribution of each water level component: tide, surge and annual cycle of monthly mean sea level (MMSL) to the ETWLs. It focuses on the contribution of the annual variation of MMSL in the coastal flooding extreme events registered in a European database. In microtidal areas (Black, Baltic and Mediterranean Sea), the MMSL contribution is mostly larger than tide, and it can be at the same order of magnitude of the surge. In meso and macrotidal areas, the MMSL contribution is <20% of the total water level, but larger (>30%) in the North Sea. No correlation was observed between the average annual cycle of monthly mean sea level (AMMSL) and coastal flooding extreme events (CFEEs) along the European coastal line. Positive correlations of the component variance of MMSL with the relative frequency of CFEEs extend to the Central Mediterranean (r = 0.59), North Sea (r = 0.60) and Baltic Sea (r = 0.75). In the case of positive MMSL anomalies, the correlation expands to the Bay of Biscay and northern North Atlantic (at >90% of statistical significance). The understanding of the spatial and temporal patterns of a combination of all the components of the ETWLs shall improve the preparedness and coastal adaptation measures to reduce the impact of coastal flooding.

Sign in / Sign up

Export Citation Format

Share Document