Prospectivity mapping of niobium and tantalum in Europe; a part of the GEOERA- FRAME project

2020 ◽  
Author(s):  
Martiya Sadeghi ◽  
Guillaume Bertrand ◽  
Helge Reginiussen ◽  
Nikolas Arvanitidis ◽  
Erik Jonsson ◽  
...  
Keyword(s):  
Raw Materials ◽  
Data Driven ◽  
Early Cambrian ◽  
Central Iberian Zone ◽  
Mineral Potential ◽  
Continental Scale ◽  
Area Of Interest ◽  
Late Neoproterozoic ◽  
Prospectivity Mapping ◽  
Critical Raw Materials

<p>The prime aim of work package (WP) 3 in the FRAME project is to produce a map of Strategic and Critical Raw Materials (SCRM) for Europe, including the so-called energy and conflict minerals. In cooperation with other FRAME WPs, there was a consensus on the methodology used for the identification and selection process of the Strategic and Critical Raw Materials (SCRM) to be included in the metallogenetic map, linked mainly to information collected from existing databases (DB), such as Minerals4EU (M4EU) and European Geological Data Infrastructure (EGDI). </p><p>One main objective of WP3 is the predictive targeting based on GIS exploration tools and prospectivity assessments at continental scale. Two types of prospectivity mapping have been produced in this WP3 based on different knowledge and data-driven methods. The first method applies the latest developments in “data driven” mineral prospectivity that allows mapping at continental scale, such as the “Cell Based Association" (CBA) one method developed by BRGM. CBA is an alternative to GIS-supported prospectivity methods. It has been developed to better manage uncertainties related to cartographic data which are highly significant at continental scale. The second method is using the hybrid fuzzy weights-of-evidence (WofE) model for mineral potential mapping.</p><p>SCRM may be recovered either as primary commodities or as by-products. Carbonatite-related deposits are the primary sources of many CRM such as REEs, niobium (Nb) and tantalum (Ta). Granitic pegmatite deposits are currently the principal source of Ta. Compilation of Nb and Ta occurrences/deposits in Europe is currently going on within FRAME WP6 (see separate presentation by Reginiussen et al., this conference). The data has been used for the spatial analysis and prospectivity mapping related to geology and geotectonic and metallogenic setting at European scale.</p><p>The results of our prospectivity mapping highlight several Nb and Ta mineral potential areas related to evolved granite to leucogranite bodies mostly in Scandinavia, Spain, France and Portugal, e.g Morille-Martinamor district, Fontão and Penouta where previous exploration activities on those elements were carried out in past. The late Neoproterozoic to early Cambrian Schist-Greywacke Complex (SGC) of the Variscan belt, in Central Iberian Zone, is also indicated as favourable area for Nb and Ta. Pegmatites in the Campo Mineiro De Lagares in the CIZ are another area of interest. Pegmatites in central Iberian zone is another area of interest, as is the case for Campo Mineiro De Lagares. The late Neoproterozoic to early Cambrian Schist-Greywacke Complex (SGC) of the Variscan belt, in Central Iberian Zone, is also indicated as favourable area for Nb and Ta. . In Sweden, the pegmatites of the Varuträskt area, close to Skellefteå, dated to c. 1.8-1.77 Ga, are clearly highlighted in the prospectivity maps. The areas related to Fennoscandian carbonatites appear also to be strongly favourable as Nb and Ta mineral potential targets. In the northern, central and southern parts of Sweden, high to moderately favourable areas are related to the numerous individual and granitic pegmatite dykes of Proterozoic age.</p>

scholarly journals Data–driven prospectivity modelling of sediment–hosted Zn–Pb mineral systems and their critical raw materials

2021 ◽  
pp. 104635
Author(s):  
Christopher J.M. Lawley ◽  
Anne E. McCafferty ◽  
Garth E. Graham ◽  
David L. Huston ◽  
Karen D. Kelley ◽  
...  
Keyword(s):  
Raw Materials ◽  
Data Driven ◽  
Critical Raw Materials

Early Ordovician alkali-ultramafic Zhilandy complex (Central Kazakhstan): structure and age of formation

2019 ◽  
Vol 484 (1) ◽  
pp. 61-65
Author(s):  
R. M. Antonuk ◽  
A. A. Tretyakov ◽  
K. E. Degtyarev ◽  
A. B. Kotov
Keyword(s):  
Complex Formation ◽  
Central Asian Orogenic Belt ◽  
Early Cambrian ◽  
Early Ordovician ◽  
Late Cambrian ◽  
Central Asian ◽  
Geochronological Study ◽  
Three Stages ◽  
Late Neoproterozoic ◽  
Quartz Monzodiorites

U–Pb geochronological study of amphibole-bearing quartz monzodiorites of the alkali-ultramafic Zhilandy complex in Central Kazakhstan, whose formation is deduced at the Early Ordovician era (479 ± 3 Ma). The obtained data indicate three stages of intra-plate magmatism in the western part of the Central Asian Orogenic Belt: Late Neoproterozoic stage of alkali syenites of the Karsakpay complex intrusion, Early Cambrian stage of ultramafic-gabbroid plutons of the Ulutau complex formation, and Late Cambrian–Early Ordovician stage of formation of the Zhilandy complex and Krasnomay complex intrusions.

scholarly journals Potential Benefits and Constraints of Development of Critical Raw Materials’ Production in the EU: Analysis of Selected Case Studies

Resources ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 67
Author(s):  
Katarzyna Guzik ◽  
Krzysztof Galos ◽  
Alicja Kot-Niewiadomska ◽  
Toni Eerola ◽  
Pasi Eilu ◽  
...  
Keyword(s):  
Case Studies ◽  
Social Acceptance ◽  
Raw Materials ◽  
Local Level ◽  
Ore Deposits ◽  
Abandoned Mines ◽  
Social Constraints ◽  
Cost And Benefit Analysis ◽  
The Eu ◽  
Critical Raw Materials

Major benefits and constraints related to mineral extraction within the EU have been identified on the examples of selected critical raw materials’ deposits. Analyzed case studies include the following ore deposits: Myszków Mo-W-Cu (Poland), Juomasuo Au-Co (Finland), S. Pedro das Águias W-Sn (Portugal), Penouta Nb-Ta-Sn (Spain), Norra Kärr REEs (Sweden) and Trælen graphite (Norway). They represent different stages of development, from the early/grassroot exploration stage, through advanced exploration and active mining, up to reopening of abandoned mines, and refer to different problems and constraints related to the possibility of exploitation commencement. The multi-criteria analysis of the cases has included geological and economic factors as well as environmental, land use, social acceptance and infrastructure factors. These factors, in terms of cost and benefit analysis, have been considered at three levels: local, country and EU levels. The analyzed cases indicated the major obstacles that occur in different stages of deposit development and need to be overcome in order to enable a new deposit exploitation commencement. These are environmental (Juomasuo and Myszków), spatial (Juomasuo) as well as social constraints (Norra Kärr, Juomasuo). In the analyzed cases, the most important constraints related to future deposit extraction occur primarily at a local level, while some important benefits are identified mainly at the country and the EU levels. These major benefits are related to securing long-term supplies for the national industries and strategically important EU industry sectors.

scholarly journals The Critical Raw Materials Issue between Scarcity, Supply Risk, and Unique Properties

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1826
Author(s):  
Mihaela Girtan ◽  
Antje Wittenberg ◽  
Maria Luisa Grilli ◽  
Daniel P. S. de Oliveira ◽  
Chiara Giosuè ◽  
...  
Keyword(s):  
Scientific Community ◽  
Chemical Elements ◽  
Raw Materials ◽  
The Other ◽  
Innovation Networks ◽  
Supply Risk ◽  
European Cooperation ◽  
Research And Innovation ◽  
The Earth ◽  
Critical Raw Materials

This editorial reports on a thorough analysis of the abundance and scarcity distribution of chemical elements and the minerals they form in the Earth, Sun, and Universe in connection with their number of neutrons and binding energy per nucleon. On one hand, understanding the elements’ formation and their specific properties related to their electronic and nucleonic structure may lead to understanding whether future solutions to replace certain elements or materials for specific technical applications are realistic. On the other hand, finding solutions to the critical availability of some of these elements is an urgent need. Even the analysis of the availability of scarce minerals from European Union sources leads to the suggestion that a wide-ranging approach is essential. These two fundamental assumptions represent also the logical approach that led the European Commission to ask for a multi-disciplinary effort from the scientific community to tackle the challenge of Critical Raw Materials. This editorial is also the story of one of the first fulcrum around which a wide network of material scientists gathered thanks to the support of the funding organization for research and innovation networks, COST (European Cooperation in Science and Technology).

scholarly journals Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1197
Author(s):  
Dumitru Mitrica ◽  
Ioana Cristina Badea ◽  
Beatrice Adriana Serban ◽  
Mihai Tudor Olaru ◽  
Denisa Vonica ◽  
...  
Keyword(s):  
Raw Materials ◽  
Extreme Environment ◽  
Extreme Conditions ◽  
The European Union ◽  
Critical Metals ◽  
Research Directions ◽  
Level Of Involvement ◽  
General Evaluation ◽  
Critical Metal ◽  
Critical Raw Materials

The paper is proposing a mini-review on the capability of the new complex concentrated alloys (CCAs) to substitute or reduce the use of critical raw materials in applications for extreme conditions. Aspects regarding the regulations and expectations formulated by the European Union in the most recent reports on the critical raw materials were presented concisely. A general evaluation was performed on the CCAs concept and the research directions. The advantages of using critical metals for particular applications were presented to acknowledge the difficulty in the substitution of such elements with other materials. In order to establish the level of involvement of CCAs in the reduction of critical metal in extreme environment applications, a presentation was made of the previous achievements in the field and the potential for the reduction of critical metal content through the use of multi-component compositions.

Strategies for fulfilment of critical raw materials demand in Europe

2012 ◽  
Vol 109 (5) ◽  
pp. 333-339 ◽  
Author(s):  
D. Senk ◽  
F.M. Meyer ◽  
T. Pretz ◽  
G. Abrasheva
Keyword(s):  
Raw Materials ◽  
Critical Raw Materials

scholarly journals WEEE collection and CRM recovery trials: piloting a holistic approach for Scotland

2018 ◽  
Vol 20 (4) ◽  
pp. 712-718
Keyword(s):  
Raw Materials ◽  
Scale Up ◽  
Holistic Approach ◽  
Extraction Methods ◽  
Social Enterprises ◽  
Raw Material ◽  
Household Waste ◽  
Sustainable Supply Chain ◽  
Gold Silver ◽  
Critical Raw Materials

<p>Re-Tek UK and its partners, Enscape Consulting and the University of West of Scotland commenced trials for the collection and recovery of critical raw materials from waste electrical and electronic (WEEE) products in July 2016. Sponsored by the EU LIFE funded project ‘Critical Raw Material Closed Loop Recovery’ coordinated by WRAP with EARN, ERP UK Ltd, KTN Ltd and Wuppertal Institute as beneficiaries. The trials are aimed at boosting the recovery of critical raw materials (CRMs) from household waste electrical and electronic products (WEEE) and Information Communications Technology (ICT) in particular, after functioning equipment is separated out for re-use. The new collection models provided residents with the opportunity to drop-off unwanted electrical and electronic appliances at a time and place that suits them, through a collaborative approach which encourages local authorities, educational establishments, businesses, and Social Enterprises, etc to act as hub sites. Hubs were designed to minimize product damage and encourage drop-off, rather than hoarding. Extraction methods developed after the collection phase of the trial looked at the opportunity to recover cobalt, gold and silver from ICT products, with the potential to inform how a more sustainable supply chain could be developed in Scotland. The elements studied were selected to demonstrate financial opportunity (gold/silver) and a strategic priority material (cobalt) for long term supply. These are based on bioleaching and electrochemical recovery using novel carbon based electrode systems, and chemical processing methods using extraction techniques with an assessment of pilot performance and scale up challenges. Our report is on the state of progress towards practical solutions to WEEE and CRM recovery.</p>

Sign in / Sign up

Export Citation Format

Share Document