Impact of bias correction techniques on an ensemble of seasonal discharge forecast for the Danube upstream of Vienna

Author(s):  
Ignacio Martin Santos ◽  
Mathew Herrnegger ◽  
Hubert Holzmann

<p>The skill of seasonal hydro-meteorological forecasts with a lead time of up to six months is currently limited, since they frequently exhibit random but also systematic errors. Bias correction algorithms can be applied and provide an effective approach in removing historical biases relative to observations. Systematic errors in hydrology model outputs can be consequence of different sources: i) errors in meteorological data used as input data, ii) errors in the hydrological model response to climate forcings, iii) unknown/unobservable internal states and iv) errors in the model parameterizations, also due to unresolved subgrid scale variability.</p><p>Normally, bias correction techniques are used to correct meteorological, e.g. precipitation data, provided by climate models. Only few studies are available applying these techniques to hydrological model outputs. Standard bias correction techniques used in literature can be classified into scaling-, and distributional-based methods. The former consists of using multiplicative or additive scaling factors to correct the modeled simulations, while the later methods are quantile mapping techniques that fit the distribution of the simulation to fit to the observations. In this study, the impact of different bias correction techniques on the seasonal discharge forecasts skill is assessed.</p><p>As a case study, a seasonal discharge forecasting system developed for the Danube basin upstream of Vienna, is used. The studied basin covers an area of around 100 000 km<sup>2</sup> and is subdivided in 65 subbasins, 55 of them gauged with a long historical record of observed discharge. The forecast system uses the calibrated hydrological model, COSERO, which is fed with an ensemble of seasonal temperature and precipitation forecasts. The output of the model provides an ensemble of seasonal discharge forecasts for each of the (gauged) subbasins. Seasonal meteorological forecasts for the past (hindcast), together with historical discharge observations, allow to assess the quality of the seasonal discharge forecasting system, also including the effects of different bias correction methods. The corrections applied to the discharge simulations allow to eliminate potential systematic errors between the modeled and observed values.</p><p>Our findings generally suggest that the quality of the seasonal forecasts improve when applying bias correction. Compared to simpler methods, which use additive or multiplicative scaling factors, quantile mapping techniques tend to be more appropriate in removing errors in the ensemble seasonal forecasts.</p>

2021 ◽  
Vol 60 (4) ◽  
pp. 455-475
Author(s):  
Maike F. Holthuijzen ◽  
Brian Beckage ◽  
Patrick J. Clemins ◽  
Dave Higdon ◽  
Jonathan M. Winter

AbstractHigh-resolution, bias-corrected climate data are necessary for climate impact studies at local scales. Gridded historical data are convenient for bias correction but may contain biases resulting from interpolation. Long-term, quality-controlled station data are generally superior climatological measurements, but because the distribution of climate stations is irregular, station data are challenging to incorporate into downscaling and bias-correction approaches. Here, we compared six novel methods for constructing full-coverage, high-resolution, bias-corrected climate products using daily maximum temperature simulations from a regional climate model (RCM). Only station data were used for bias correction. We quantified performance of the six methods with the root-mean-square-error (RMSE) and Perkins skill score (PSS) and used two ANOVA models to analyze how performance varied among methods. We validated the six methods using two calibration periods of observed data (1980–89 and 1980–2014) and two testing sets of RCM data (1990–2014 and 1980–2014). RMSE for all methods varied throughout the year and was larger in cold months, whereas PSS was more consistent. Quantile-mapping bias-correction techniques substantially improved PSS, while simple linear transfer functions performed best in improving RMSE. For the 1980–89 calibration period, simple quantile-mapping techniques outperformed empirical quantile mapping (EQM) in improving PSS. When calibration and testing time periods were equivalent, EQM resulted in the largest improvements in PSS. No one method performed best in both RMSE and PSS. Our results indicate that simple quantile-mapping techniques are less prone to overfitting than EQM and are suitable for processing future climate model output, whereas EQM is ideal for bias correcting historical climate model output.


Climate ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 181
Author(s):  
Alice Crespi ◽  
Marcello Petitta ◽  
Paola Marson ◽  
Christian Viel ◽  
Lucas Grigis

This work discusses the ability of a bias-adjustment method using empirical quantile mapping to improve the skills of seasonal forecasts over Europe for three key climate variables, i.e., temperature, precipitation and wind speed. In particular, the suitability of the approach to be integrated in climate services and to provide tailored predictions for local applications was evaluated. The workflow was defined in order to allow a flexible implementation and applicability while providing accurate results. The scheme adjusted monthly quantities from the seasonal forecasting system SEAS5 of the European Centre for Medium-Range Forecasts (ECMWF) by using ERA5 reanalysis as reference. Raw and adjusted forecasts were verified through several metrics analyzing different aspects of forecast skills. The applied method reduced model biases for all variables and seasons even though more limited improvements were obtained for precipitation. In order to further assess the benefits and limitations of the procedure, the results were compared with those obtained by the ADAMONT method, which calibrates daily quantities by empirical quantile mapping conditioned by weather regimes. The comparable performances demonstrated the overall suitability of the proposed method to provide end users with calibrated predictions of monthly and seasonal quantities.


2020 ◽  
Vol 21 (10) ◽  
pp. 2375-2389
Author(s):  
Hector Macian-Sorribes ◽  
Ilias Pechlivanidis ◽  
Louise Crochemore ◽  
Manuel Pulido-Velazquez

AbstractStreamflow forecasting services driven by seasonal meteorological forecasts from dynamic prediction systems deliver valuable information for decision-making in the water sector. Moving beyond the traditional river basin boundaries, large-scale hydrological models enable a coordinated, efficient, and harmonized anticipation and management of water-related risks (droughts, floods). However, the use of forecasts from such models at the river basin scale remains a challenge, depending on how the model reproduces the hydrological features of each particular river basin. Consequently, postprocessing of forecasts is a crucial step to ensure usefulness at the river basin scale. In this paper we present a methodology to postprocess seasonal streamflow forecasts from large-scale hydrological models and advance their quality for local applications. It consists of fuzzy logic systems that bias-adjust seasonal forecasts from a large-scale hydrological model by comparing its modeled streamflows with local observations. The methodology is demonstrated using forecasts from the pan-European hydrological model E-HYPE at the Jucar River basin (Spain). Fuzzy postprocessed forecasts are compared to postprocessed forecasts derived from a quantile mapping approach as a benchmark. Fuzzy postprocessing was able to provide skillful streamflow forecasts for the Jucar River basin, keeping most of the skill of raw E-HYPE forecasts and also outperforming quantile-mapping-based forecasts. The proposed methodology offers an efficient one-to-one mapping between large-scale modeled streamflows and basin-scale observations preserving its temporal dependence structure and can adapt its input set to increase the skill of postprocessed forecasts.


2021 ◽  
Author(s):  
Oldrich Rakovec ◽  
Maren Kaluza ◽  
Rohini Kumar ◽  
Robert Schweppe ◽  
Pallav Shrestha ◽  
...  

<p>This study synthesizes the advancements made in the setup of the mesoscale Hydrologic Model (mHM; [1,2,3]) at the global scale. Underlying vegetation and geophysical characteristics are provided at ≈200m, while the mHM simulates water fluxes and states between 10 km and 100 km spatial resolution. The meteorologic forcing data are derived from the readily available, near-real time ERA-5 dataset [4]. The total of 50 global parameters of the Multiscale Parameter Regionalization (MPR) are constrained in two modes: (1) streamflow only across 3054 gauges, and (2) streamflow across 3054 gauges and simultaneously with FLUXNET ET and GRACE TWSA across 258 domains consisting of ≈10° x 10° blocks. Model performance is finally evaluated against a range of observed and reference data since 1985. </p><p>The single best parameter set evaluated across 3054 GRDC global streamflow station yield median performance of 0.47 daily KGE (0.55 monthly KGE). This performance varies strongly between continents. For example, median daily KGE across Europe is around 0.55 (N basins=972) and across northern America around 0.5 (N basins=1264). So far, the worst model performance is observed across Africa, with median KGE of 0 (N basins=202), using the same globally constrained parameter set. The deterioration of model performance based on seamless parameterization can be explained by the quality of the underlying data, which corresponds to areas, where water balance closure error is the biggest. Additionally, missed model processes play an important role as well. Finally, there remains a large gap between the onsite calibrations and global calibrations and ongoing research is being done to narrow down these differences. This work is the fundament for building skillful global seasonal forecasting system ULYSSES [6], which provides hindcasts and operational seasonal forecasts of hydrologic variables using four state of the art hydrologic/land surface models with lead time of 6 months.</p><ul><li>[1] https://www.ufz.de/mhm</li> <li>[2] https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2008WR007327</li> <li>[3] https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2012WR012195</li> <li>[4] https://rmets.onlinelibrary.wiley.com/doi/10.1002/qj.3803</li> <li>[5] https://www.ufz.de/ulysses</li> </ul>


2020 ◽  
Author(s):  
Bernard Minoungou ◽  
Jafet Andersson ◽  
Abdou Ali ◽  
Mohamed Hamatan

<p>The rainy season occupies a central place in socio-economic activities in the Sahelian regions, as more than 80% of the population lives on agriculture and livestock. However, extreme hydroclimatic events such as droughts and floods affect these activities. Efforts made in recent years in the production of hydroclimatic information to enhance the resilience of populations have become insufficient, given the variability and climate change.</p><p>In this context, we have conducted a study on improving the quality of seasonal forecast information to strengthen the resilience and improve the food security in West Africa, especially on the Niger River Basin. We used seasonal climate forecasts and the HYPE hydrological model to predict some characteristics of the rainy season in West Africa. The ECMWF seasonal forecast ensemble (system 5) from 1993 to 2015 (hindcast) and 2018 (forecast), available in the Climate Data Store (CDS) catalogue were used. The climatic variables considered are daily precipitation, mean and extreme temperatures (minimum and maximum) at the seasonal scale. The main objective was to assess the ability of the HYPE hydrological model, developed by Swedish Meteorological and Hydrological Institue, to predict runoff over the historical period and to produce hydrological seasonal forecasts for next years.</p><p>The main season’s characteristics produced are: (i) cumulative rainfall map for the rainy season (May to November), (ii) the rainfall situation of the season (above, near or below normal considering 1993-2015 as reference period), (iii) hydrological situation of the season (above, near or below normal considering 1993-2015 as reference period), (v) graph of the mean seasonal streamflow over the Niger Basin compared to the reference period (1993-2015).</p><p>The predictability of 2018 hydrological seasonal products were assessed and the results are promising. The main challenges we faced were the initialisation of the model, the bias correction (the reference data to be considered and the appropriate method). Further research on these topics should continue to improve the quality of results.</p>


2019 ◽  
Vol 20 (1) ◽  
pp. 99-115 ◽  
Author(s):  
Niko Wanders ◽  
Stephan Thober ◽  
Rohini Kumar ◽  
Ming Pan ◽  
Justin Sheffield ◽  
...  

Abstract Hydrological forecasts with a high temporal and spatial resolution are required to provide the level of information needed by end users. So far high-resolution multimodel seasonal hydrological forecasts have been unavailable due to 1) lack of availability of high-resolution meteorological seasonal forecasts, requiring temporal and spatial downscaling; 2) a mismatch between the provided seasonal forecast information and the user needs; and 3) lack of consistency between the hydrological model outputs to generate multimodel seasonal hydrological forecasts. As part of the End-to-End Demonstrator for Improved Decision Making in the Water Sector in Europe (EDgE) project commissioned by the Copernicus Climate Change Service (ECMWF), this study provides a unique dataset of seasonal hydrological forecasts derived from four general circulation models [CanCM4, GFDL Forecast-Oriented Low Ocean Resolution version of CM2.5 (GFDL-FLOR), ECMWF Season Forecast System 4 (ECMWF-S4), and Météo-France LFPW] in combination with four hydrological models [mesoscale hydrologic model (mHM), Noah-MP, PCRaster Global Water Balance (PCR-GLOBWB), and VIC]. The forecasts are provided at daily resolution, 6-month lead time, and 5-km spatial resolution over the historical period from 1993 to 2012. Consistency in hydrological model parameterization ensures an increased consistency in the hydrological forecasts. Results show that skillful discharge forecasts can be made throughout Europe up to 3 months in advance, with predictability up to 6 months for northern Europe resulting from the improved predictability of the spring snowmelt. The new system provides an unprecedented ensemble of seasonal hydrological forecasts with significant skill over Europe to support water management. This study highlights the potential advantages of multimodel based forecasting system in providing skillful hydrological forecasts.


2005 ◽  
Vol 133 (5) ◽  
pp. 1328-1342 ◽  
Author(s):  
Gennady A. Chepurin ◽  
James A. Carton ◽  
Dick Dee

Abstract Numerical models of ocean circulation are subject to systematic errors resulting from errors in model physics, numerics, inaccurately specified initial conditions, and errors in surface forcing. In addition to a time-mean component, the systematic errors include components that are time varying, which could result, for example, from inaccuracies in the time-varying forcing. Despite their importance, most assimilation algorithms incorrectly assume that the forecast model is unbiased. In this paper the authors characterize the bias for a current assimilation scheme in the tropical Pacific. The characterization is used to show how relatively simple empirical bias forecast models may be used in a two-stage bias correction procedure to improve the quality of the analysis.


2012 ◽  
Vol 8 (1) ◽  
pp. 135-141 ◽  
Author(s):  
I. Zalachori ◽  
M.-H. Ramos ◽  
R. Garçon ◽  
T. Mathevet ◽  
J. Gailhard

Abstract. The aim of this paper is to investigate the use of statistical correction techniques in hydrological ensemble prediction. Ensemble weather forecasts (precipitation and temperature) are used as forcing variables to a hydrologic forecasting model for the production of ensemble streamflow forecasts. The impact of different bias correction strategies on the quality of the forecasts is examined. The performance of the system is evaluated when statistical processing is applied: to precipitation and temperature forecasts only (pre-processing from the hydrological model point of view), to flow forecasts (post-processing) and to both. The pre-processing technique combines precipitation ensemble predictions with an analog forecasting approach, while the post-processing is based on past errors of the hydrological model when simulating streamflows. Forecasts from 11 catchments in France are evaluated. Results illustrate the importance of taking into account hydrological uncertainties to improve the quality of operational streamflow forecasts.


2021 ◽  
Vol 21 (4) ◽  
pp. 434-443
Author(s):  
Satyanarayana Tani ◽  
Andreas Gobiet

The potential of quantile mapping (QM) as a tool for bias correction of precipitation extremes simulated by regional climate models (RCMs) is investigated in this study. We developed an extended version of QM to improve the quality of bias-corrected extreme precipitation events. The extended version aims to exploit the advantages of both non-parametric methods and extreme value theory. We evaluated QM by applying it to a small ensemble of hindcast simulations, performed with RCMs at six different locations in Europe. We examined the quality of both raw and bias-corrected simulations of precipitation extremes using the split sample and cross-validation approaches. The split-sample approach mimics the application to future climate scenarios, while the cross-validation framework is designed to analyse “new extremes”, that is, events beyond the range of calibration of QM. We demonstrate that QM generally improves the simulation of precipitation extremes, compared to raw RCM results, but still tends to present unstable behaviour at higher quantiles. This instability can be avoided by carefully imposing constraints on the estimation of the distribution of extremes. The extended version of the bias-correction method greatly improves the simulation of precipitation extremes in all cases evaluated here. In particular, extremes in the classical sense and new extremes are both improved. The proposed approach is shown to provide a better representation of the climate change signal and can thus be expected to improve extreme event response for cases such as floods in bias-corrected simulations, a development of importance in various climate change impact assessments. Our results are encouraging for the use of QM for RCM precipitation post-processing in impact studies where extremes are of relevance.


Sign in / Sign up

Export Citation Format

Share Document