Towards the removal of model bias from ESA CCI SM by using an L-band scaling reference

2021 ◽  
Author(s):  
Rémi Madelon ◽  
Nemesio Rodriguez-Fernandez ◽  
Robin Van Der Shalie ◽  
Yann Kerr ◽  
Tracy Scalon ◽  
...  
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Climate Models ◽  
In Situ Measurements ◽  
Time Data ◽  
Data Set ◽  
Spatial Coverage ◽  
L Band ◽  
Better Than

<p>Merging data from different instruments is required to construct long time data records of soil moisture (SM). This is the goal of projects such as the ESA Climate Change Initiative (CCI) for SM (Gruber et al., 2019), which uses both active and passive microwave sensors. Currently, the GLDAS v2.1 model is used as reference to re-scale active and passive time series by matching their Cumulative Density Function (CDF) to that of the model. Removing the dependency on models is important, in particular for data assimilation applications into hydrological or climate models, and it has been proposed (Van der Schalie et al., 2018) to use L-band data from one of the two instruments specifically designed to measure SM, ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, as reference to re-scale other time series.<br>To investigate this approach, AMSR-2 SM time series obtained from C1-, C2- and X-band observations using LPRM (Land Parameter Retrieval Model) were re-scaled by CDF-matching (Brocca et al., 2011) using different SMAP and SMOS official (SMAP L2 V005, SMOS L3 V300, SMOS NRT V100&V200) and research (SMOS IC V103) SM products as well as the SMAP and SMOS LPRM v6 SM data used by the ESA CCI. The time series re-scaled using L-band remote sensing data were compared to those re-scaled using GLDAS and were evaluated against in situ measurements at several hundred sites retrieved from the International Soil Moisture Network (Dorigo et al., 2011). The results were analyzed as a function of the land cover class and the Koppen-Geiger climate classification.<br>Overall, AMSR-2 time series re-scaled using SMAP L2, SMAP LPRM and SMOS IC data sets as reference gave the best correlations with respect to in situ measurements, similar to those obtained by the time series re-scaled using GLDAS and slightly better than those of the original AMSR-2 time series. These results imply that different SMAP and SMOS products could actually be used to replace GLDAS as reference for the re-scaling of other sensors time series within the ESA CCI. However, one must bear in mind that this study is limited to the re-scaling of AMSR-2 data at a few hundred sites.<br>For a more detailed assessment of the L-band data set to be used for a global re-scaling, it is necessary to investigate other effects such as the spatial coverage or the time series length. SMAP spatial coverage is better than that of SMOS in regions affected by radio frequency interference. In contrast, the length of SMAP time series can be too short to capture the long term SM variability for climate applications in some regions. The CDF of SMOS time series computed from the date of SMAP launch is significantly different to those of the full length SMOS time series in some regions of the Globe. Possible ways of using a coherent SMAP/SMOS L-band data set will be discussed.</p>

scholarly journals Intercomparison of Soil Moisture Retrieved from GNSS-R and from Passive L-Band Radiometry at the Valencia Anchor Station

Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1900
Author(s):  
Cong Yin ◽  
Ernesto Lopez-Baeza ◽  
Manuel Martin-Neira ◽  
Roberto Fernandez-Moran ◽  
Lei Yang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Circular Polarization ◽  
European Space Agency ◽  
In Situ Measurements ◽  
Anchor Station ◽  
L Band ◽  
The Impact ◽  
Band Radiometer ◽  
Soil Moisture Monitoring

In this paper, the SOMOSTA (Soil Moisture Monitoring Station) experiment on the intercomparison of soil moisture monitoring from Global Navigation Satellite System Reflectometry (GNSS-R) signals and passive L-band microwave radiometer observations at the Valencia Anchor Station is introduced. The GNSS-R instrument has an up-looking antenna for receiving direct signals from satellites, and a dual-pol down-looking antenna for receiving LHCP (left-hand circular polarization) and RHCP (right-hand circular polarization) reflected signals from the soil surface. Data were collected from the three different antennas through the two channels of Oceanpal GNSS-R receiver and, in addition, calibration was performed to reduce the impact from the differing channels. Reflectivity was thus measured, and soil moisture could be retrieved. The ESA (European Space Agency)-funded ELBARA-II (ESA L Band Radiometer II) is an L-band radiometer with two channels with 11 MHz bandwidth and respective center frequencies of 1407.5 MHz and 1419.5 MHz. The ELBARAII antenna is a large dual-mode Picket horn that is 1.4 m wide, with a length of 2.7 m with −3 dB full beam width of 12° (±6° around the antenna main direction) and a gain of 23.5 dB. By comparing GNSS-R and ELBARA-II radiometer data, a high correlation was found between the LHCP reflectivity measured by GNSS-R and the horizontal/vertical reflectivity from the radiometer (with correlation coefficients ranging from 0.83 to 0.91). Neural net fitting was used for GNSS-R soil moisture inversion, and the RMSE (Root Mean Square Error) was 0.014 m3/m3. The determination coefficient between the retrieved soil moisture and in situ measurements was R2 = 0.90 for Oceanpal and R2 = 0.65 for Elbara II, and the ubRMSE (Unbiased RMSE) were 0.0128 and 0.0734 respectively. The soil moisture retrievals by both L-band remote sensing methods show good agreement with each other, and their mutual correspondence with in-situ measurements and with rainfall was also good.

Towards an improved temporal stability of CCI+SSS time series

2021 ◽  
Author(s):  
Xavier Perrot ◽  
Jacqueline Boutin ◽  
Jean Luc Vergely ◽  
Frédéric Rouffi ◽  
Adrien Martin ◽  
...  
Keyword(s):  
Climate Change ◽  
Time Series ◽  
Dielectric Constant ◽  
Soil Moisture ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
L Band ◽  
Band Radiometer

<p>This study is performed in the frame of the European Space Agency (ESA) Climate Change Initiative (CCI+) for Sea Surface Salinity (SSS), which aims at generating global SSS fields from all available satellite L-band radiometer measurements over the longest possible period with a great stability. By combining SSS from the Soil Moisture and Ocean Salinity, SMOS, Aquarius and the Soil Moisture Active Passive, SMAP missions, CCI+SSS fields (Boutin et al. 2020) are the only one to provide a 10 year time series of satellite salinity with such quality: global rms difference of weekly 25x25km<span>2 </span>CCI+SSS with respect to in situ Argo SSS of 0.17 pss, correlation coefficient of 0.97 (see https://pimep.ifremer.fr/diffusion/analyses/mdb-database/GO/cci-l4-esa-merged-oi-v2.31-7dr/argo/report/pimep-mdb-report_GO_cci-l4-esa-merged-oi-v2.31-7dr_argo_20201215.pdf). Nevertheless, we found that some systematic biases remained. In this presentation, we will show how they will be reduced in the next CCI+SSS version.</p><p>The key satellite mission ensuring the longest time period, since 2010, at global scale, is SMOS. We implemented a re-processing of the whole SMOS dataset by changing some key points. Firstly we replace the Klein and Swift (1977) dielectric constant parametrization by the new Boutin et al. (2020) one. Secondly we change the reference dataset used to perform a vicarious calibration over the south east Pacific Ocean (the so-called Ocean Target Transformation), by using Argo interpolated fields (ISAS, Gaillard et al. 2016) contemporaneous to the satellite measurements instead of the World Ocean Atlas climatology. And thirdly the auxiliary data (wind, SST, atmospheric parameters) used as priors in the retrieval scheme, which come in the original SMOS processing from the ECMWF forecast model were replaced by ERA5 reanalysis.</p><p>Our results are showing a quantitative improvement in the stability of the SMOS CCI+SSS with respect to in situ measurements for all the period as well as a decrease of the spread of the difference between SMOS and in situ salinity measurements.</p><p>Bibliography:</p><p>J. Boutin et al. (2020), Correcting Sea Surface Temperature Spurious Effects in Salinity Retrieved From Spaceborne L-Band Radiometer Measurements, IEEE Transactions on Geoscience and Remote Sensing, doi: 10.1109/TGRS.2020.3030488.</p><p>F. Gaillard et al. (2016), In Situ–Based Reanalysis of the Global Ocean Temperature and Salinity with ISAS: Variability of the Heat Content and Steric Height, Journal of Climate, vol. 29, no. 4, pp. 1305-1323, doi: 10.1175/JCLI-D-15-0028.1.</p><p>L. Klein and C. Swift (1977), An improved model for the dielectric constant of sea water at microwave frequencies, IEEE Transactions on Antennas and Propagation, vol. 25, no. 1, pp. <span>104-111, </span>doi: 10.1109/JOE.1977.1145319.</p><p>Data reference:</p><p>J. Boutin et al. (2020): ESA Sea Surface Salinity Climate Change Initiative (Sea_Surface_Salinity_cci): Weekly sea surface salinity product, v2.31, for 2010 to 2019. Centre for Environmental Data Analysis. https://catalogue.ceda.ac.uk/uuid/eacb7580e1b54afeaabb0fd2b0a53828</p>

scholarly journals Improving the AMSR-E/NASA Soil Moisture Data Product Using In-Situ Measurements from the Tibetan Plateau

2019 ◽  
Vol 11 (23) ◽  
pp. 2748
Author(s):  
Qiuxia Xie ◽  
Massimo Menenti ◽  
Li Jia
Keyword(s):  
Soil Moisture ◽  
Tibetan Plateau ◽  
Linear Relationship ◽  
Dynamic Range ◽  
In Situ Measurements ◽  
Retrieval Algorithm ◽  
Transfer Model ◽  
The Tibetan Plateau ◽  
Data Set

The daily AMSR-E/NASA (the Advanced Microwave Scanning Radiometer-Earth Observing System/the National Aeronautics and Space Administration) and JAXA (the Japan Aerospace Exploration Agency) soil moisture (SM) products from 2002 to 2011 at 25 km resolution were developed and distributed by the NASA National Snow and Ice Data Center Distributed Active Archive Center (NSIDC DAAC) and JAXA archives, respectively. This study analyzed and evaluated the temporal changes and accuracy of the AMSR-E/NASA SM product and compared it with the AMSR-E/JAXA SM product. The accuracy of both AMSR-E/NASA and JAXA SM was low, with RMSE (root mean square error) > 0.1 cm3 cm−3 against the in-situ SM measurements, especially the AMSR-E/NASA SM. Compared with the AMSR-E/JAXA SM, the dynamic range of AMSR-E/NASA SM is very narrow in many regions and does not reflect the intra- and inter-annual variability of soil moisture. We evaluated both data products by building a linear relationship between the SM and the Microwave Polarization Difference Index (MPDI) to simplify the AMSR-E/NASA SM retrieval algorithm on the basis of the observed relationship between samples extracted from the MPDI and SM data. We obtained the coefficients of this linear relationship (i.e., A0 and A1) using in-situ measurements of SM and brightness temperature (TB) data simulated with the same radiative transfer model applied to develop the AMSR-E/NASA SM algorithm. Finally, the linear relationships between the SM and MPDI were used to retrieve the SM monthly from AMSR-E TB data, and the estimated SM was validated using the in-situ SM measurements in the Naqu area on the Tibetan Plateau of China. We obtained a steeper slope, i.e., A1 = 8, with the in-situ SM measurements against A1 = 1, when using the NASA SM retrievals. The low A1 value is a measure of the low sensitivity of the NASA SM retrievals to MPDI and its narrow dynamic range. These results were confirmed by analyzing a data set collected in Poland. In the case of the Tibetan Plateau, the higher value A1 = 8 gave more accurate monthly AMSR-E SM retrievals with RMSE = 0.065 cm3 cm−3. The dynamic range of the improved retrievals was more consistent with the in-situ SM measurements than with both the AMSR-E/NASA and JAXA SM products in the Naqu area of the Tibetan Plateau in 2011.

scholarly journals Validation of the SMOS Level 1C Brightness Temperature and Level 2 Soil Moisture Data over the West and Southwest of Iran

2020 ◽  
Vol 12 (17) ◽  
pp. 2819
Author(s):  
Mozhdeh Jamei ◽  
Mohammad Mousavi Baygi ◽  
Ebrahim Asadi Oskouei ◽  
Ernesto Lopez-Baeza
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Land Surface ◽  
Climate Models ◽  
Weather Forecasting ◽  
European Space Agency ◽  
In Situ Measurements ◽  
Satellite Measurements ◽  
Level 2

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission with the MIRAS (Microwave Imaging Radiometer using Aperture Synthesis) L-band radiometer provides global soil moisture (SM) data. SM data and products from remote sensing are relatively new, but they are providing significant observations for weather forecasting, water resources management, agriculture, land surface, and climate models assessment, etc. However, the accuracy of satellite measurements is still subject to error from the retrieval algorithms and vegetation cover. Therefore, the validation of satellite measurements is crucial to understand the quality of retrieval products. The objectives of this study, precisely framed within this mission, are (i) validation of the SMOS Level 1C Brightness Temperature (TBSMOS) products in comparison with simulated products from the L-MEB model (TBL-MEB) and (ii) validation of the SMOS Level 2 SM (SMSMOS) products against ground-based measurements at 10 significant Iranian agrometeorological stations. The validations were performed for the period of January 2012 to May 2015 over the Southwest and West of Iran. The results of the validation analysis showed an RMSE ranging between 9 to 13 K and a strong correlation (R = 0.61–0.84) between TBSMOS and TBL-MEB at all stations. The bias values (0.1 to 7.5 K) showed a slight overestimation for TBSMOS at most of the stations. The results of SMSMOS validation indicated a high agreement (RMSE = 0.046–0.079 m3 m−3 and R = 0.65–0.84) between the satellite SM and in situ measurements over all the stations. The findings of this research indicated that SMSMOS shows high accuracy and agreement with in situ measurements which validate its potential. Due to the limitation of SM measurements in Iran, the SMOS products can be used in different scientific and practical applications at different Iranian study areas.

scholarly journals An Aerosol Optical Depth time series 1982–2014 for atmospheric correction based on OMI and TOMS Aerosol Index

2016 ◽  
Author(s):  
Emmihenna Jääskeläinen ◽  
Terhikki Manninen ◽  
Johanna Tamminen ◽  
Marko Laine
Keyword(s):  
Time Series ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Surface Albedo ◽  
Atmospheric Correction ◽  
In Situ Measurements ◽  
Ozone Monitoring Instrument ◽  
Data Set ◽  
Aerosol Index

Abstract. The atmospheric correction of old optical satellite data is problematic, because corresponding Aerosol Optical Depth (AOD) measurements in the visible wavelength range do not exist. The construction of an AOD time series for atmospheric correction purposes to cover the period 1982–2014 is described in this paper. The AOD estimates are calculated from the Aerosol Index (AI) data from the Total Ozone Mapping Spectrometer (TOMS) and the Ozone Monitoring Instrument (OMI). We apply this time series to the generation of the surface albedo data set CLARA-A2-SAL (the Surface ALbedo from the CM SAF cLoud, Albedo and RAdiation data set, the second version). The constructed AOD time series is temporally homogeneous, and it has sufficient quality compared to the AOD from OMI observations and from in situ measurements. The simulated atmospheric correction calculations, where the constructed AOD data are used as an aerosol input, are similar to the simulations where the aerosol information from OMI and in situ measurements is used. Also, the simulations show that the use of the constructed AOD time series decreases the surface reflectance values (the output of the atmospheric correction) globally compared to the use of the constant AOD value 0.1.

scholarly journals Mapping High Spatiotemporal-Resolution Soil Moisture by Upscaling Sparse Ground-Based Observations Using a Bayesian Linear Regression Method for Comparison with Microwave Remotely Sensed Soil Moisture Products

2021 ◽  
Vol 13 (2) ◽  
pp. 228
Author(s):  
Jian Kang ◽  
Rui Jin ◽  
Xin Li ◽  
Yang Zhang
Keyword(s):  
Soil Moisture ◽  
Large Scale ◽  
Spatial Scales ◽  
Microwave Remote Sensing ◽  
In Situ Measurements ◽  
Spatial Density ◽  
Linear Regression Method ◽  
Spatiotemporal Resolution ◽  
Pixel Scale

In recent decades, microwave remote sensing (RS) has been used to measure soil moisture (SM). Long-term and large-scale RS SM datasets derived from various microwave sensors have been used in environmental fields. Understanding the accuracies of RS SM products is essential for their proper applications. However, due to the mismatched spatial scale between the ground-based and RS observations, the truth at the pixel scale may not be accurately represented by ground-based observations, especially when the spatial density of in situ measurements is low. Because ground-based observations are often sparsely distributed, temporal upscaling was adopted to transform a few in situ measurements into SM values at a pixel scale of 1 km by introducing the temperature vegetation dryness index (TVDI) related to SM. The upscaled SM showed high consistency with in situ SM observations and could accurately capture rainfall events. The upscaled SM was considered as the reference data to evaluate RS SM products at different spatial scales. In regard to the validation results, in addition to the correlation coefficient (R) of the Soil Moisture Active Passive (SMAP) SM being slightly lower than that of the Climate Change Initiative (CCI) SM, SMAP had the best performance in terms of the root-mean-square error (RMSE), unbiased RMSE and bias, followed by the CCI. The Soil Moisture and Ocean Salinity (SMOS) products were in worse agreement with the upscaled SM and were inferior to the R value of the X-band SM of the Advanced Microwave Scanning Radiometer 2 (AMSR2). In conclusion, in the study area, the SMAP and CCI SM are more reliable, although both products were underestimated by 0.060 cm3 cm−3 and 0.077 cm3 cm−3, respectively. If the biases are corrected, then the improved SMAP with an RMSE of 0.043 cm3 cm−3 and the CCI with an RMSE of 0.039 cm3 cm−3 will hopefully reach the application requirement for an accuracy with an RMSE less than 0.040 cm3 cm−3.

Combining Sentinel-1 and ALOS-2 observations for soil moisture retrieval

2021 ◽  
Author(s):  
Anna Balenzano ◽  
Giuseppe Satalino ◽  
Francesco Lovergine ◽  
Davide Palmisano ◽  
Francesco Mattia ◽  
...  
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Temporal Resolution ◽  
Surface Soil ◽  
Earth Science ◽  
Observation System ◽  
Final Report ◽  
Surface Soil Moisture ◽  
Error Characterization ◽  
L Band

<p>One of the limitations of presently available Synthetic Aperture Radar (SAR) surface soil moisture (SSM) products is their moderated temporal resolution (e.g., 3-4 days) that is non optimal for several applications, as most user requirements point to a temporal resolution of 1-2 days or less. A possible path to tackle this issue is to coordinate multi-mission SAR acquisitions with a view to the future Copernicus Sentinel-1 (C&D and Next Generation) and L-band Radar Observation System for Europe (ROSE-L).</p><p>In this respect, the recent agreement between the Japanese (JAXA) and European (ESA) Space Agencies on the use of SAR Satellites in Earth Science and Applications provides a framework to develop and validate multi-frequency and multi-platform SAR SSM products. In 2019 and 2020, to support insights on the interoperability between C- and L-band SAR observations for SSM retrieval, Sentinel-1 and ALOS-2 systematic acquisitions over the TERENO (Terrestrial Environmental Observatories) Selhausen (Germany) and Apulian Tavoliere (Italy) cal/val sites were gathered. Both sites are well documented and equipped with hydrologic networks.</p><p>The objective of this study is to investigate the integration of multi-frequency SAR measurements for a consistent and harmonized SSM retrieval throughout the error characterization of a combined C- and L-band SSM product. To this scope, time series of Sentinel-1 IW and ALOS-2 FBD data acquired over the two sites will be analysed. The short time change detection (STCD) algorithm, developed, implemented and recently assessed on Sentinel-1 data [e.g., Balenzano et al., 2020; Mattia et al., 2020], will be tailored to the ALOS-2 data. Then, the time series of SAR SSM maps from each SAR system will be derived separately and aggregated in an interleaved SSM product. Furthermore, it will be compared against in situ SSM data systematically acquired by the ground stations deployed at both sites. The study will assess the interleaved SSM product and evaluate the homogeneous quality of C- and L-band SAR SSM maps.</p><p> </p><p> </p><p>References</p><p>Balenzano. A., et al., “Sentinel-1 soil moisture at 1km resolution: a validation study”, submitted to Remote Sensing of Environment (2020).</p><p>Mattia, F., A. Balenzano, G. Satalino, F. Lovergine, A. Loew, et al., “ESA SEOM Land project on Exploitation of Sentinel-1 for Surface Soil Moisture Retrieval at High Resolution,” final report, contract number 4000118762/16/I-NB, 2020.</p>

scholarly journals Stationary and Non-Stationary Frameworks for Extreme Rainfall Time Series in Southern Italy

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1477 ◽  
Author(s):  
Davide De Luca ◽  
Luciano Galasso
Keyword(s):  
Time Series ◽  
Climate Models ◽  
Southern Italy ◽  
Regional Climate ◽  
Data Series ◽  
Rainfall Time Series ◽  
Annual Maximum ◽  
Data Set ◽  
Maximum Rainfall ◽  
Rainfall Events

This study tests stationary and non-stationary approaches for modelling data series of hydro-meteorological variables. Specifically, the authors considered annual maximum rainfall accumulations observed in the Calabria region (southern Italy), and attention was focused on time series characterized by heavy rainfall events which occurred from 1 January 2000 in the study area. This choice is justified by the need to check if the recent rainfall events in the new century can be considered as very different or not from the events occurred in the past. In detail, the whole data set of each considered time series (characterized by a sample size N > 40 data) was analyzed, in order to compare recent and past rainfall accumulations, which occurred in a specific site. All the proposed models were based on the Two-Component Extreme Value (TCEV) probability distribution, which is frequently applied for annual maximum time series in Calabria. The authors discussed the possible sources of uncertainty related to each framework and remarked on the crucial role played by ergodicity. In fact, if the process is assumed to be non-stationary, then ergodicity cannot hold, and thus possible trends should be derived from external sources, different from the time series of interest: in this work, Regional Climate Models’ (RCMs) outputs were considered in order to assess possible trends of TCEV parameters. From the obtained results, it does not seem essential to adopt non-stationary models, as significant trends do not appear from the observed data, due to a relevant number of heavy events which also occurred in the central part of the last century.

Sign in / Sign up

Export Citation Format

Share Document