scholarly journals Supporting Remote Sensing Research with Small Unmanned Aerial Systems

2014 ◽  
Vol XL-1 ◽  
pp. 51-56 ◽  
Author(s):  
R. C. Anderson ◽  
P. C. Shanks ◽  
L. A. Kritis ◽  
M. G. Trani
Keyword(s):  
Remote Sensing ◽  
Point Clouds ◽  
Unmanned Aerial Systems ◽  
Operational Mode ◽  
Cooperative Research ◽  
Research Initiative ◽  
Basic And Applied Research ◽  
Aerial Systems ◽  
Cooperative Research And Development ◽  
Research Office

We describe several remote sensing research projects supported with small Unmanned Aerial Systems (sUAS) operated by the NGA Basic and Applied Research Office. These sUAS collections provide data supporting Small Business Innovative Research (SBIR), NGA University Research Initiative (NURI), and Cooperative Research And Development Agreements (CRADA) efforts in addition to inhouse research. Some preliminary results related to 3D electro-optical point clouds are presented, and some research goals discussed. Additional details related to the autonomous operational mode of both our multi-rotor and fixed wing small Unmanned Aerial System (sUAS) platforms are presented.

scholarly journals Error simulations of uncorrected NDVI and DCVI during remote sensing measurements from UAS

2014 ◽  
Vol 18 (2) ◽  
pp. 35-45 ◽  
Author(s):  
Michał T. Chiliński ◽  
Marek Ostrowski
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Vegetation Index ◽  
Vegetation Mapping ◽  
Radiative Transfer Model ◽  
Unmanned Aerial Systems ◽  
Transfer Model ◽  
Digital Cameras ◽  
Aerial Systems

Abstract Remote sensing from unmanned aerial systems (UAS) has been gaining popularity in the last few years. In the field of vegetation mapping, digital cameras converted to calculate vegetation index (DCVI) are one of the most popular sensors. This paper presents simulations using a radiative transfer model (libRadtran) of DCVI and NDVI results in an environment of possible UAS flight scenarios. The analysis of the results is focused on the comparison of atmosphere influence on both indices. The results revealed uncertainties in uncorrected DCVI measurements up to 25% at the altitude of 5 km, 5% at 1 km and around 1% at 0.15 km, which suggests that DCVI can be widely used on small UAS operating below 0.2 km.

scholarly journals A commentary review on the use of normalized difference vegetation index (NDVI) in the era of popular remote sensing

2020 ◽  
Vol 32 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Sha Huang ◽  
Lina Tang ◽  
Joseph P. Hupy ◽  
Yang Wang ◽  
Guofan Shao
Keyword(s):  
Remote Sensing ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Unmanned Aerial Systems ◽  
Atmospheric Effect ◽  
Saturation Phenomenon ◽  
Near Ir ◽  
Critical Problems ◽  
Low Costs ◽  
Aerial Systems

AbstractThe Normalized Difference Vegetation Index (NDVI), one of the earliest remote sensing analytical products used to simplify the complexities of multi-spectral imagery, is now the most popular index used for vegetation assessment. This popularity and widespread use relate to how an NDVI can be calculated with any multispectral sensor with a visible and a near-IR band. Increasingly low costs and weights of multispectral sensors mean they can be mounted on satellite, aerial, and increasingly—Unmanned Aerial Systems (UAS). While studies have found that the NDVI is effective for expressing vegetation status and quantified vegetation attributes, its widespread use and popularity, especially in UAS applications, carry inherent risks of misuse with end users who received little to no remote sensing education. This article summarizes the progress of NDVI acquisition, highlights the areas of NDVI application, and addresses the critical problems and considerations in using NDVI. Detailed discussion mainly covers three aspects: atmospheric effect, saturation phenomenon, and sensor factors. The use of NDVI can be highly effective as long as its limitations and capabilities are understood. This consideration is particularly important to the UAS user community.

scholarly journals Long‐duration fully autonomous operation of rotorcraft unmanned aerial systems for remote‐sensing data acquisition

2019 ◽  
Vol 37 (1) ◽  
pp. 137-157 ◽  
Author(s):  
Danylo Malyuta ◽  
Christian Brommer ◽  
Daniel Hentzen ◽  
Thomas Stastny ◽  
Roland Siegwart ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Data Acquisition ◽  
Remote Sensing Data ◽  
Unmanned Aerial Systems ◽  
Sensing Data ◽  
Autonomous Operation ◽  
Long Duration ◽  
Aerial Systems

Making the invisible visible: using UAS-based high-resolution color-infrared imagery to identify buried medieval monastery walls

2015 ◽  
Vol 3 (2) ◽  
pp. 58-67 ◽  
Author(s):  
Jan Rudolf Karl Lehmann ◽  
Keturah Zoe Smithson ◽  
Torsten Prinz
Keyword(s):  
Remote Sensing ◽  
Water Stress ◽  
High Resolution ◽  
Vegetation Index ◽  
Archaeological Site ◽  
Unmanned Aerial Systems ◽  
Surrounding Water ◽  
Normalised Difference Vegetation Index ◽  
Remote Sensing Techniques ◽  
Aerial Systems

Remote sensing techniques have become an increasingly important tool for surveying archaeological sites. However, budgeting issues in archaeological research often limit the application of satellite or airborne imagery. Unmanned aerial systems (UAS) provide a flexible, quick, and more economical alternative to commonly used remote sensing techniques. In this study, the buried features of the archaeological site of the Kleinburlo monastery, near Münster, Germany, were identified using high-resolution color–infrared (CIR) images collected from a UAS platform. Based on these CIR images, a modified normalised difference vegetation index (NDVIblue) was calculated, showing reflectance spectra of vegetation anomalies caused by water stress. In the presented study, the vegetation growing on top of the buried walls was better nourished than the surrounding plants because very wet conditions over the days previous to data collection caused higher levels of water stress in the surrounding water-drenched land. This difference in water stress was a good indicator for detecting archaeological remains.

scholarly journals Measuring Height Characteristics of Sagebrush (Artemisia sp.) Using Imagery Derived from Small Unmanned Aerial Systems (sUAS)

Drones ◽  
2020 ◽  
Vol 4 (1) ◽  
pp. 6 ◽  
Author(s):  
Ryan G. Howell ◽  
Ryan R. Jensen ◽  
Steven L. Petersen ◽  
Randy T. Larsen
Keyword(s):  
Data Storage ◽  
Accuracy Assessment ◽  
Point Clouds ◽  
Unmanned Aerial Systems ◽  
Surface Model ◽  
Sage Grouse ◽  
Double Pass ◽  
Single Pass ◽  
3D Point Clouds ◽  
Aerial Systems

In situ measurements of sagebrush have traditionally been expensive and time consuming. Currently, improvements in small Unmanned Aerial Systems (sUAS) technology can be used to quantify sagebrush morphology and community structure with high resolution imagery on western rangelands, especially in sensitive habitat of the Greater sage-grouse (Centrocercus urophasianus). The emergence of photogrammetry algorithms to generate 3D point clouds from true color imagery can potentially increase the efficiency and accuracy of measuring shrub height in sage-grouse habitat. Our objective was to determine optimal parameters for measuring sagebrush height including flight altitude, single- vs. double- pass, and continuous vs. pause features. We acquired imagery using a DJI Mavic Pro 2 multi-rotor Unmanned Aerial Vehicle (UAV) equipped with an RGB camera, flown at 30.5, 45, 75, and 120 m and implementing single-pass and double-pass methods, using continuous flight and paused flight for each photo method. We generated a Digital Surface Model (DSM) from which we derived plant height, and then performed an accuracy assessment using on the ground measurements taken at the time of flight. We found high correlation between field measured heights and estimated heights, with a mean difference of approximately 10 cm (SE = 0.4 cm) and little variability in accuracy between flights with different heights and other parameters after statistical correction using linear regression. We conclude that higher altitude flights using a single-pass method are optimal to measure sagebrush height due to lower requirements in data storage and processing time.

scholarly journals Visualizing the Spatiotemporal Trends of Thermal Characteristics in a Peatland Plantation Forest in Indonesia: Pilot Test Using Unmanned Aerial Systems (UASs)

2018 ◽  
Vol 10 (9) ◽  
pp. 1345 ◽  
Author(s):  
Kotaro Iizuka ◽  
Kazuo Watanabe ◽  
Tsuyoshi Kato ◽  
Niken Putri ◽  
Sisva Silsigia ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Thermal Characteristics ◽  
Unmanned Aerial Systems ◽  
Surface Model ◽  
Plantation Forest ◽  
Vegetation Height ◽  
Spatiotemporal Trends ◽  
New Findings ◽  
Thermal Data ◽  
Aerial Systems

The high demand for unmanned aerial systems (UASs) reflects the notable impact that these systems have had on the remote sensing field in recent years. Such systems can be used to discover new findings and develop strategic plans in related scientific fields. In this work, a case study is performed to describe a novel approach that uses a UAS with two different sensors and assesses the possibility of monitoring peatland in a small area of a plantation forest in West Kalimantan, Indonesia. First, a multicopter drone with an onboard camera was used to collect aerial images of the study area. The structure from motion (SfM) method was implemented to generate a mosaic image. A digital surface model (DSM) and digital terrain model (DTM) were used to compute a canopy height model (CHM) and explore the vegetation height. Second, a multicopter drone combined with a thermal infrared camera (Zenmuse-XT) was utilized to collect both spatial and temporal thermal data from the study area. The temperature is an important factor that controls the oxidation of tropical peats by microorganisms, root respiration, the soil water content, and so forth. In turn, these processes can alter the greenhouse gas (GHG) flux in the area. Using principal component analysis (PCA), the thermal data were processed to visualize the thermal characteristics of the study site, and the PCA successfully extracted different feature areas. The trends in the thermal information clearly show the differences among land cover types, and the heating and cooling of the peat varies throughout the study area. This study shows the potential for using UAS thermal remote sensing to interpret the characteristics of thermal trends in peatland environments, and the proposed method can be used to guide strategical approaches for monitoring the peatlands in Indonesia.

Sign in / Sign up

Export Citation Format

Share Document