scholarly journals Effect of heat treatment on corrosion resistance of friction stir welded AA 2024 aluminum alloy

2011 ◽  
Vol 2 (2) ◽  
pp. 297-306 ◽  
Author(s):  
Muna Abbass ◽  
Hani Ameen ◽  
Khairia Hassan
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
2024 Aluminum Alloy ◽  
Friction Stir ◽  
Aa 2024

scholarly journals The Effects of Maintaining Temperature in Annealing Heat Treatment for an FSWed 6061-T6 Al Alloy

2013 ◽  
Vol 19 (S5) ◽  
pp. 69-72
Author(s):  
Seung-Jun Lee ◽  
Min-Su Han ◽  
Seong-Jong Kim
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Welding Process ◽  
Frictional Heat ◽  
Al Alloy ◽  
Friction Stir ◽  
Significant Difference ◽  
Annealing Heat Treatment ◽  
Annealing Heat

AbstractThe technological development of all kinds of lightweight transportation devices including vehicles, aircraft, ships, etc. has progressed markedly with the demand for energy saving and environmental protection. Aluminum alloy is in the spotlight as it is a suitable environmentally friendly material. However, deformation is a major problem during the welding process because aluminum alloy has a large thermal expansion coefficient. In addition, it is known that its corrosion resistance is excellent; nevertheless, in practice, considerable corrosion is generated and this is a major problem. To solve this problem, the friction stir welding (FSW) technology is applied extensively at various industrial fields as a new welding technique. This method involves a process in which materials are joined by frictional heat and physical force. Therefore, we evaluated improvements in mechanical properties and corrosion resistance through annealing heat treatment after FSW. The electrochemical experiment did not show a significant difference. However, the microstructure observation showed defectless, fine crystal particles, indicating excellent properties at 200–225°C.

scholarly journals Effect of nanostructure on phase transformations during heat treatment of 2024 aluminum alloy

2021 ◽  
Author(s):  
K. B. Demétrio ◽  
A.P. G. Nogueira ◽  
C. Menapace ◽  
T. Bendo ◽  
A. Molinari
Keyword(s):  
Heat Treatment ◽  
Aluminum Alloy ◽  
Phase Transformations ◽  
2024 Aluminum Alloy

Corrosion Studies and Interfacial Bonding of Urea/Poly(dimethylsiloxane) Sol/Gel Hydrophobic Coatings on AA 2024 Aluminum Alloy

Langmuir ◽  
2007 ◽  
Vol 23 (10) ◽  
pp. 5505-5514 ◽  
Author(s):  
Mojca Fir ◽  
Boris Orel ◽  
Angela Šurca Vuk ◽  
Aljaž Vilčnik ◽  
Robi Ješe ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Sol Gel ◽  
Interfacial Bonding ◽  
2024 Aluminum Alloy ◽  
Hydrophobic Coatings ◽  
Corrosion Studies ◽  
Aa 2024

Friction stir welding of 2024 aluminum alloy: Study of major parameters and threading feature on probe

2017 ◽  
Vol 31 (11) ◽  
pp. 5435-5445 ◽  
Author(s):  
Sarah Gholam Nejad ◽  
Mehdi Yektapour ◽  
Arash Akbarifard
Keyword(s):  
Aluminum Alloy ◽  
Friction Stir Welding ◽  
2024 Aluminum Alloy ◽  
Friction Stir

scholarly journals Effect of Heat Treatment and Sulfuric Acid Anodization on Corrosion Resistance of Aluminum Alloy (AA7075)

2021 ◽  
Vol 40 (1) ◽  
pp. 56-62
Author(s):  
M. Abdullahi ◽  
L.S. Kuburi ◽  
P.T. Zubairu ◽  
U. Jabo ◽  
A.A. Yahaya ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Sulfuric Acid ◽  
Corrosion Rate ◽  
Polarization Resistance ◽  
Testing Machine ◽  
Palm Kernel ◽  
Engine Oil ◽  
Micro Hardness

This paper, studied the effect of heat treatment and anodization on corrosion resistance of aluminum alloy 7075 (AA7075), with a view to improving its corrosion resistance. Microstructure and micro hardness of the anodic film of the samples were studied with the aid of optical metallurgical microscope and automated micro hardness testing machine. Linear polarization methods were used to assess the corrosion behaviour of the alloy in 0.5M HCl. The microstructure of the annealed sample showed formation of dendrites while precipitation hardened samples in palm kernel oil and SAE 40 engine oil showed precipitates of MgZn2. The SEMS result showed pores and micro cracks on the surfaces of the anodized samples, with the as cast and anodized sample in sulfuric acid exhibiting most compact with few pores. The as cast and sulfuric acid anodized sample shows highest micro hardness value of 205.33 HV, while the least value of 150.67 HV was recorded in sample precipitation hardened in SAE 40 engine oil and anodized in sulfuric acid. Analysis of the potentiodynamic polarization data and curves showed a linear relationship (decrease in icorr, decreases the corrosion rate) between current density and the corrosion rate in all the samples. Higher polarization resistance of 15.093 Ω/cm2 was recorded by the as cast and Sulfuric acid (SA) anodized sample while the precipitation treated in SAE 40 engine oil plus SA anodized sample recorded lowest polarization resistance of 5.2311 Ω/cm2. Heat treatment alone improves corrosion resistance of AA 7075 in 0.5 M HCl solution but heat treatment plus SA anodization does not improve corrosion resistance in the same environment.

Effect of Pre-Strain Rolling on Annealing Behavior of Friction-Stir Welded AA6061-T6 Aluminum Alloy

2018 ◽  
Vol 385 ◽  
pp. 355-358 ◽  
Author(s):  
Sergey Mironov ◽  
Sergey Malopheyev ◽  
Igor Vysotskiy ◽  
Daria Zhemchuzhnikova ◽  
Rustam Kaibyshev
Keyword(s):  
Heat Treatment ◽  
Thermal Stability ◽  
Aluminum Alloy ◽  
Cold Rolling ◽  
Grain Growth ◽  
Rolling Schedule ◽  
Annealing Behavior ◽  
Friction Stir ◽  
Welding Direction ◽  
Thermal Stability Of

In this work, the effect of pre-strain cold rolling on thermal stability of friction-stir welded AA6061-T6 alloy was studied. The pre-strain rolling was found to be very effective in suppression of abnormal grain growth during standard post-weld T6 heat treatment. It was also shown that the efficiency of this approach essentially depends on rolling path and the rolling along welding direction was the most effective rolling schedule.

Effect of Post-Weld Aging on The Corrosion Resistance and Mechanical Properties of Friction Stir Welded Aluminum Alloy 7475-T73

2013 ◽  
pp. 225-234
Author(s):  
Bharat K. Jasthi ◽  
Erik Klinckman ◽  
Todd Curtis ◽  
Christian Widener ◽  
Michael West ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Friction Stir
Sign in / Sign up

Export Citation Format

Share Document