Development and Evaluation of Fast dissolving Film of Fluoxetine hydrochloride

2021 ◽  
pp. 5345-5350
Author(s):  
Vedanshu Malviya ◽  
Srikant Pande
Keyword(s):  
Stability Study ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Potential Candidate ◽  
Disintegration Time ◽  
Surface Ph ◽  
Drug Content ◽  
Fluoxetine Hydrochloride ◽  
Folding Endurance

The intention of the present study was to formulate the oral dispersible film of Fluoxetine hydrochloride using pullulan as a polymer and to evaluate it with the different parameters. The drug-excipients studies were carried out in order to determine any type of incompatibilities by using Fourier transmission infrared spectroscopy (FT-IR). The oral dispersible films were prepared using solvent casting method using pullulan as a polymer. Glycerin was used as a plasticizer. The prepared films were evaluated for the parameters like physical appearance, thickness, folding endurance, In-vitro disintegration, mechanical properties, surface pH, drug content uniformity, taste evaluation, In-vitro dissolution test and stability study. The X5 formulation was found to be stable and appropriate in its evaluation parameters than compared to other formulations. The folding endurance was found to be 259±2.53, disintegration time was found to be 04±0.69, thickness was found to be 0.081±0.003, tensile strength was found to be 5.55, the % elongation was found to be 27.50, the maximum percentage drug release was found to be 95.80% in 30 minutes. The drug content was found to be 99.86 with surface pH of 6.8. In the stability studies of the formulation the product was found to be stable for 90 days. The oral dispersible film is simple to administer and very much effective for the patients and the prepared film of fluoxetine hydrochloride proves to be potential candidate for safe and effective oral dispersible drug delivery.

FORMULATION AND EVALUATION OF FAST DISSOLVING FILM OF FOSINOPRIL

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (12) ◽  
pp. 34-40
Author(s):  
V.V Pande ◽  
◽  
A.A. Patel ◽  
V.P. Patel ◽  
P.V. Khedkar
Keyword(s):  
Moisture Absorption ◽  
Physical Appearance ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Study Results ◽  
Folding Endurance ◽  
The Stability

The mouth dissolving film overcomes the shortfalls of conventional quick dispersing/dissolving intraoral tablets. Fosinopril is an angiotensin converting enzyme (ACE) inhibitor used for the treatment of hypertension and some types of chronic heart failure.It undergoes extensive hepatic first pass metabolism, with bioavailability being only 36%. In the present investigation, an attempt was made to formulate fast dissolving film of fosinopril sodium by Solvent casting method using various film forming polymers such as HPMC 5cps, HPMC E-3, HPMC E-15 each being varied at three different concentration(6%,8%,10%). Drug-excipient compatibility studies were carried out by FTIR spectroscopy and DSC. in order to establish compatibility between drug and excipients The results revealed that the drug and excipients were satisfactorily compatible, without any significant changes in the chemical nature of the drug. Prepared films were subjected to different evaluation parameters such as folding endurance, physical appearance, %moisture absorption,drug content uniformity, in vitro disintegration time, in vitro dissolution studies and stability studies. All the formulations show name accurred compliance with pharmacopoeial standards. The stability study shows that no significant changes in films after one month study. Results revealed that the formulations F1 containing 6% HPMC 5cps showed better release property, low disintegration time, good folding endurance and good physical appearance compared to other formulations, so it was selected as the best formulation.

scholarly journals DESIGN, OPTIMIZATION AND EVALUATION OF CETRIZINE DIHYDROCHLORIDE FAST DISSOLVING FILMS EMPLOYING STARCH TARTRATE–A NOVEL SUPERDISINTEGRANT

2019 ◽  
pp. 75-86
Author(s):  
R. SANTOSH KUMAR ◽  
ANNU KUMARI ◽  
B. KUSUMA LATHA ◽  
PRUDHVI RAJ
Keyword(s):  
Tensile Strength ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Folding Endurance ◽  
Contour Plots ◽  
The Individual

Objective: The aim of the current research is optimization, preparation and evaluation of starch tartrate (novel super disintegrant) and preparation of fast dissolving oral films of cetirizine dihydrochloride by employing starch tartrate. Methods: To check the drug excipient compatibility studies of the selected drug (Cetrizine dihydrochloride) and the prepared excipient i. e starch tartrate, different studies like FTIR (Fourier-transform infrared spectroscopy), DSC (Differential scanning calorimetry) and thin-layer chromatography (TLC) were carried out to find out whether there is any interaction between cetirizine dihydrochloride and starch tartrate. The solvent casting method was used for the preparation of fast dissolving films. The prepared films were then evaluated for thickness, folding endurance, content uniformity, tensile strength, percent elongation, in vitro disintegration time and in-vitro dissolution studies. Response surface plots and contour plots were also plotted to know the individual and combined effect of starch tartrate (A), croscarmellose sodium (B) and crospovidone (C) on disintegration time and drug dissolution efficiency in 10 min (dependent variables). Results: Films of all the formulations are of good quality, smooth and elegant by appearance. Drug content (100±5%), thickness (0.059 mm to 0.061 mm), the weight of films varies from 51.33 to 58.06 mg, folding endurance (52 to 67 times), tensile strength (10.25 to 12.08 N/mm2). Fast dissolving films were found to disintegrate between 34 to 69 sec. Percent dissolved in 5 min were found to be more in F1 formulation which confirms that starch tartrate was effective at 1%. Conclusion: From the research conducted, it was proved that starch tartrate can be used in the formulation of fast dissolving films of cetirizine dihydrochloride. The disintegration time of the films was increased with increase in concentration of super disintegrant.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF BROMOCRIPTINE MESYLATE AS FAST DISSOLVING ORAL FILM

2018 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Manar Adnan Tamer ◽  
Shaimaa Nazar Abd-al Hammid ◽  
Balqis Ahmed
Keyword(s):  
Drug Release ◽  
Physical Characterization ◽  
Type Ii ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content ◽  
Folding Endurance ◽  
In Vitro Disintegration

Objective: The aim of this study was to formulate and in vitro evaluate fast dissolving oral film of practically insoluble bromocriptine mesylate to enhance its solubility and to improve its oral bioavailability by avoiding first pass effect as well as to produce an immediate release action of the drug from the film for an efficient management of diabetes mellitus type II in addition to an improvement of the patient compliance to this patient-friendly dosage form.Methods: The films were prepared by the solvent casting method using hydroxypropyl methylcellulose of grades (E3, E5, E15), polyvinyl alcohol (PVA), pectin and gelatin as film-forming polymers in addition to polyethene glycol 400 (PEG400), propylene glycol (PG) and glycerin were used as a plasticizer. Poloxamer 407 was used as a surfactant, sodium saccharin as a sweetening agent, citric acid as a saliva stimulating agent, vanilla as a flavouring agent and crospovidone as a super disintegrant. The prepared films then tested for physical characterization, thickness, weight uniformity, mechanical characteristics (folding endurance, tensile strength, percent elongation and Young's modulus), surface pH, in vitro disintegration time, drug content and an in vitro drug release.Results: Films were found to be satisfactory when evaluated for physical characterization, thickness, weight uniformity, mechanical tests, in vitro disintegration time, folding endurance, drug content and an in vitro drug release. The surface pH of all the films was found to be neutral or minor change. Films in vitro drug release studies were also done using USP dissolution apparatus type II (paddle type). The in vitro drug release profile in the optimized formulation F14 was gave 86.8 % of drug released at 2 min. The optimized formulation F14 was also showed satisfactory pH (6.2±0.2), drug content (99.2±0.5%), the disintegration time of 9.2±0.1 seconds and the time needed for 80% of medication to be released (T80 %) was 1.35 minute.Conclusion: The bromocriptine mesylate fast dissolving oral film was formulated. The given film disintegrates within nine seconds which release the drug rapidly and gives an action.

scholarly journals Development and Optimization of Fast Dissolving Oral Film Containing Aripiprazole

2017 ◽  
Vol 9 (06) ◽  
Author(s):  
S. Jyothi Sri ◽  
D.V. R.N Bhikshapathi
Keyword(s):  
Good Alternative ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Solvent Casting ◽  
Casting Method ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Folding Endurance ◽  
Oral Films

The present investigation was aimed with the objective of developing fast dissolving oral films of Aripiprazole to attain quick onset of action for the better management of Schizophrenia. Fourteen formulations (F1-F14) of Aripiprazole mouth dissolving films by solvent-casting method using HPMC E5, HPMC E15, Maltodextrin, PG and PVA. Formulations were evaluated for their physical characteristics, thickness, folding endurance, tensile strength, disintegration time, drug content uniformity and drug release characteristics and found to be within the limits. Among the prepared formulations F13 showed minimum disintegration time 10 sec, maximum drug was released i.e. 99.49 ± 0.36% of drug within 8 min when compared to the other formulations and finalized as optimized formulation. FTIR data revealed that no interactions take place between the drug and polymers used in the optimized formulation. The in vitro dissolution profiles of marketed product and optimized formulation was compared and found to be the drug released was 20.73 ± 0.25 after 8 min. Therefore, it can be a good alternative to conventional Aripiprazole for immediate action. In vitro evaluation of the Aripiprazole fast dissolving oral films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Aripiprazole. The mouth dissolving film is potentially useful for the treatment of Schizophrenia where the quick onset of action is desired.

scholarly journals DESIGN, DEVELOPMENT AND EVALUATION OF MOUTH DISSOLVING TABLETS OF TOFACITINIB CITRATE

2022 ◽  
pp. 238-245
Author(s):  
MEGHANA RAYKAR ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Release ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Bulk Drug

Objective: This study aims to Formulate Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate with the increase in bioavailability and patient compliance. Methods: Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate were developed by full factorial design at 32levelsand prepared by direct compression method using super integrants like sodium starch glycolate, Ludiflash. The tablets were compressed into compacts on a 10 station tablet machine. The bulk drug was characterised by determining, MP, Solubility, pH and FTIR spectra. Results: The weight variation, hardness and diameter, thickness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies, and stability study, tablet thickness, weight variation and drug content post compression parameters remained consistent and reproducible. All the formulations showed, almost 100 percent of drug release within 75 min. Formulations F1, F2 and F3 were prepared with 5 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F1<F2<F3. Formulations F4, F5 and F6 were prepared with 10 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F4<F5<F6. Formulations F7, F8 and F9 were prepared with 15 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F7<F8<F9. Conclusion: It is concluded that the amount of superdisintegrants decreases disintegration time of tablets, decreases wetting time, increases the cumulative % drug release causes better absorption.

scholarly journals Preparation and assessment of ocular inserts containing sulbactum for controlled drug delivery

2020 ◽  
Vol 10 (1-s) ◽  
pp. 66-71
Author(s):  
Monika Dhaka ◽  
Rupa Mazumdar ◽  
Md Rafiul Haque
Keyword(s):  
Drug Delivery ◽  
Antibacterial Agent ◽  
Content Uniformity ◽  
Surface Ph ◽  
Drug Content ◽  
Controlled Drugs ◽  
Accelerated Stability ◽  
Folding Endurance ◽  
Alcohol Ethyl

Ocuserts or Ophthalmic inserts are sterile preparations containing drug as dispersion or as solution in the polymeric support. The sulbactum is highly used as antibacterial agent in combination with other antibacterial agent. This study aims to formulate novel sulbactum ocuserts to enhance patient compliance through providing controlled drugs release from polymeric matrix. Ocuserts were prepared by solvent-casting method using different polymers HPMC, K4M, Polyvinyl alcohol,ethyl cellulose as polymer gelatine and propylene glycol and dibutyl phthalate as plasticizer in different ratios. The prepared ocusters were physic-chemichally evaluated for their weight, thickness, drug content uniformity, surface pH, swelling index (SI) and folding endurance. The viscosity of the polymeric solution used for the formulations was determined using Brookfield viscometer. In-Vitro Drug Release study and Accelerated stability studies were also performed. The prepared ocuserts show uniform weight, thickness and drug content. Their surface pH was in the physiological range and showed acceptable folding endurance. HPMC formulas had higher SI values. Results of in-vitro testing for one of the prepared ocuserts shows slow release of drugs up to 24 hours. One of the prepared ocuserts is promising for once-daily effective and safe drug delivery system of sulbactum for glaucoma treatment. Keyword: Ocuserts, sulbactum, viscosity, Ophthalmic

DESIGN AND CHARACTERIZATION OF ACECLOFENAC FAST DISSOLVING TABLETS USING SUPER DISINTEGRATING AGENTS

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (01) ◽  
pp. 34-40
Author(s):  
V.L Narasaiah ◽  
◽  
Ch. Praneetha ◽  
P Mallika ◽  
K. Pullamma ◽  
...  
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
Content Uniformity ◽  
Disintegration Time ◽  
First Order ◽  
Drug Content ◽  
Weight Variation

The aim of this project was to develop fast dissolving tablets (FDT) of aceclofenac by wet granulation using super disintegrating agents such as cross carmellose sodium (CCS), Crospovidone (CP) and sodium starch glycolate (SSG) were formulated and evaluated. The tablets evaluated for thickness, hardness, friability weight variation, drug content, water absorption ratio, wetting time, disintegration time and in vitro dissolution studies. The in vitro release studies were conducted in pH 7.4 phosphate buffer. Different release models like zero order, first order, Higuchi and Korsmeyer-Peppas were applied to in vitro drug release data in order to evaluate drug release mechanisms and kinetics. The formulation ‘F4’ showed satisfactory physico-chemical properties and drug content uniformity. The formulation ‘F4’ follows first order kinetics and the mechanism of drug release was governed by Higuchi. The ‘n’ value showed between <0.5, it was followed that Fickian transport. The FTIR studies were conducted and it shows that there is no interaction between drug and excipients.

scholarly journals Preparation and Evaluation of Palonosetron Hydrochloride Oral Thin Film

2019 ◽  
Vol 22 (2) ◽  
pp. 228-234 ◽  
Author(s):  
Sreebash Chandra Bhowmik ◽  
Marzia Alam ◽  
Md Saiful Islam Pathan
Keyword(s):  
Thin Film ◽  
Research Work ◽  
Pharmaceutical Journal ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Disintegration Time ◽  
Weight Variation ◽  
Folding Endurance

The purpose of the current study was to develop a fast dissolving polymeric oral thin film containing palonosetron hydrochloride having good mechanical properties, fast disintegration, dissolution and good drug content uniformity. Solvent casting method was used to prepare the films. Compatibility between drugs and excipients were studied using FTIR and HPLC. Nine different formulations of film from F1 to F9 were prepared using different concentration of polymer A at drug-polymer A ratio (1:26), (1:28), (1:30), (1:32), (1:34), (1:36), (1:38), (1:40), (1:42) and at polymer A-plasticizer B of (65:10), (70:10), (75:10), (40:10), (42.5:10), (45:10), (47.5:10), (50:10), (52.5:10), respectively. The in vitro dissolution study was carried out in phosphate buffer (pH 6.8) at 37±0.5oC and 50 rpm using USP XXIV paddle method. Physicochemical evaluations of all the batches were performed including weight variation, thickness, folding endurance, pH, in vitro disintegration and drug release, FTIR and content uniformity test. Maximum and minimum drug dissolution were found in F6 (108.7%) and in F1 (98.5%), respectively. The maximum and minimum disintegration time were in F9 (43.8 sec) and F1 (25 sec), respectively which demonstrated that disintegration of the film was directly proportional to the polymer A and plasticizer B concentration. It is quite evident from the present research work that the film prepared using polymer A-plasticizer B were smooth, mechanically strong and easy to peel out. Among all the batches, formulation F5 showed best results with respect to disintegration (33 sec), drug dissolution (105%), content uniformity (98.51%) and folding endurance (731). Therefore, it can be said that combination of polymer A and plasticizer B can be prospectively used for the preparation of palonosetron hydrochloride oral thin film. Bangladesh Pharmaceutical Journal 22(2): 228-234, 2019

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING TABLETS OF BUSPIRONE USING COPROCESSED SUPERDISINTEGRANTS

2019 ◽  
pp. 31-37
Author(s):  
SHALLY SHARMA ◽  
NIMRATA SETH ◽  
NARESH SINGH GILL
Keyword(s):  
Water Absorption ◽  
Dosage Form ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Wetting Time

Objective: The present study aims to formulate and evaluate Fast dissolving tablet of Buspirone, the drug that is used for management of anxiety, by direct compression method using various Super disintegrants. Methods: Ten formulations (F1-F10) of fast dissolving tablets of Buspirone were prepared by using various Superdisintegrants. The prepared tablets were evaluated for hardness, friability, thickness, drug content uniformity, water absorption, wetting time, and disintegration time and in vitro dissolution study. Results: Among all the formulations, F10 (containing 5 mg of Coprocessed (CS: SSG 1:2) Superdisintegrants) was considered to be the best formulation, which released up to 98% drug in 20 min as compared to a marketed conventional dosage form which dissolves in approx 60 min. The results of stability study of formulation F10 after a period of two months indicated that the formulation was stable. Conclusion: It was concluded that a fast-dissolving tablet of Buspirone containing various Superdisintegrants is better and effective to meet patient compliance.

Design, Optimization and Evaluation of Fast-Dissolving Oral Films of Ropinirole

2018 ◽  
Vol 11 (1) ◽  
pp. 3958-3967
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Srinivas A
Keyword(s):  
Parkinson’S Disease ◽  
Parkinson's Disease ◽  
Good Alternative ◽  
In Vitro Dissolution ◽  
Content Uniformity ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Peg 4000 ◽  
Oral Films

The main objective of this study was to develop fast dissolving oral films of ropinirole HCl to attain quick onset of action for the better management of Parkinson’s disease. Twenty-seven formulations (F1-F27) of ropinirole oral dissolving films by solvent-casting method using 33 response surface method by using HPMC E15, Maltodextrin PEG 4000 by using Design of experiment software. Formulations were evaluated for their physical characteristics, thickness, folding endurance, tensile strength, disintegration time, drug content uniformity and drug release characteristics and found to be within the limits. Among the prepared formulations F4 showed minimum disintegration time 11 sec, maximum drug was released i.e. 99.68 ± 1.52% of drug within 10 min when compared to the other formulations and finalized as optimized formulation. FTIR data revealed that no interactions takes place between the drug and polymers used in the optimized formulation. The in vitro dissolution profiles of marketed product and optimized formulation was compared and found to be the drug released was 92.77 ± 1.52 after 50 min. Therefore, it can be a good alternative to conventional ropinirole for immediate action. In vitro evaluation of the ropinirole fast dissolving films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of ropinirole. The oral dissolving film is considered to be potentially useful for the treatment of Parkinson’s disease where quick onset of action is desired

Sign in / Sign up

Export Citation Format

Share Document