scholarly journals Optimization of extraction conditions of flavonoids from Houttuynia cordata Thumb leaves

2021 ◽  
Vol 20 (02) ◽  
pp. 51-61
Author(s):  
Anh T. Vu
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Dry Matter ◽  
Raw Materials ◽  
Enzyme Concentration ◽  
Houttuynia Cordata ◽  
Independent Variables ◽  
Cellulase Enzyme ◽  
Central Composite

This study was conducted to investigate the application of cellulase enzyme in the extraction of flavonoids from Houttuynia cordata Thumb leaves and optimize the extraction conditions. Independent variables, including enzyme concentration (25 - 100 µg/mL), temperature (30 - 50oC), time (30 - 120 min) and ratio of raw materials to enzyme (1:15 - 1:30 g/mL), were investigated. Extraction conditions of flavonoids were designed according to Central Composite Design - Uniform Precision (CCD), a response surface methodology using a software JMP Pro version 13. The results indicated that the optimal extraction conditions were found to be enzyme concentration (78.0 µg/mL), temperature (41oC), time (90 min), and the ratio of material to the enzyme (1:26 g/mL). Under such conditions, the highest content of flavonoids (24.04 ± 0.05 mg/g, dry matter) was obtained and validated. It can be concluded that the flavonoids can be optimally extracted under the optimal extraction conditions with assistance of cellulase.

scholarly journals Optimasi Karakteristik Tepung Komposit Berbasis Tepung Onggok Fermentasi menggunakan Metode Response Surface Methodology (RSM)

2020 ◽  
Vol 9 (3) ◽  
pp. 126-132
Author(s):  
Beni Hidayat ◽  
Udin Hasanuddin ◽  
Siti Nurdjanah ◽  
Neti Yuliana ◽  
Muhammad Muslihudin ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Raw Materials ◽  
Pasting Properties ◽  
Composite Flour ◽  
Gluten Free ◽  
Cassava Bagasse ◽  
Bagasse Flour ◽  
Central Composite

Pengembangan tepung komposit di negara-negara tropis terutama diarahkan pada pengembangan produk tepung bebas-gluten berbahan baku lokal. Penelitian bertujuan untuk mendapatkan formulasi optimal tepung komposit berbahan baku tepung onggok fermentasi (TOF), tapioka dan gum xanthan (GX) untuk menghasilkan tepung komposit dengan karakteristik optimal sebagai tepung bebas-gluten. Optimasi karakteristik tepung komposit dilakukan menggunakan metode respon permukaan dengan model Central Composite Design. Hasil optimasi menggunakan metode numerik menunjukkan bahwa karakteristik optimal produk tepung komposit diperoleh pada formulasi 1) TOF: 82,46%, tapioka: 17,54%, GX: 0,10%, 2) TOF: 83,85%, tapioka: 16,15%, GX: 0,10%, dan 3) TOF: 84,13%, tapioka: 15,87%, GX: 0,10%. Formulasi-formulasi optimal selanjutnya dianalisis karakteristik pastingnya, mencakup  viskositas maksimum, viskositas awal pendinginan, viskositas akhir pendinginan, viskositas retrogradasi, dan viskositas balik. Pengujian karakteristik pasting pada formulasi optimal menunjukkan bahwa formulasi TOF: 82,46%, tapioka: 17,54%, GX: 0,10% karena memiliki karakteristik pasting terbaik dengan viskositas maksimum  215 BU, viskositas awal pendinginan 166 BU, viskositas akhir pendinginan 217 BU, viskositas retrogradasi 208 BU, dan viskositas balik 49 BU. Oleh karena itu, penelitian ini berhasil menyimpulkan bahwa tepung komposit dengan formulasi TOF: 82,64%, tapioka: 17,54%, GX: 0,10% merupakan perlakuan terbaik yang dapat dijadikan sebagai alternatif tepung bebas-gluten berbahan baku lokal. Hal ini menunjukkan bahwa tepung komposit dengan formulasi 82,64% tepung onggok terfermentasi, mempunyai potensi khusus untuk dikembangkan sebagai tepung bebas-gluten berbahan baku lokal.Optimization of Characteristic of Fermented Cassava Bagasse Flour-Based Composite Flour using Response Surface MethodologyAbstractThe development of composite flour in tropical countries is mainly directed at gluten-free flour made from local raw materials. The research was aimed to obtain an optimal formula of composite flour that was made of fermented cassava bagasse flour (FCBF), tapioca, and xanthan gum (XG) to produce composite flour with best characteristics quality as gluten-free flour. Optimization of the composite flour characteristics was done using the response surface methodology with the central composite design model. Optimization results using numerical methods shown that the optimal characteristics of composite flour were obtained in formulas 1) FCBF: 82.46%, tapioca: 17.54%, XG: 0.10%, 2) FCBF: 83.85%, tapioca: 16.15%, XG: 0.10%, and 3) FCBF: 84.13%, tapioca: 15.87%, XG: 0.10%. The optimal formulas were analyzed for pasting characteristics, including peak temperature, maximum viscosity, trough viscosity, final viscosity, retrogradation viscosity, and setback viscosity. The results of pasting characteristic test on optimal formulation showed that FCBF formulation: 82.64%, tapioca: 17.50%, XG: 0.10% had the best pasting properties with peak viscosity of 215 BU, trough viscosity of 166 BU, final viscosity of 217 BU, retrogradation viscosity of 208 BU, and setback viscosity of 49 BU. As conclusion, formula of FCBF: 82.64%, tapioca: 17.50%, XG: 0.10% was chosen as the best formula to produce gluten-free flour from local raw materials. This indicates that composite flour with formulation of 82,64% fermented cassava bagasse flour, potentially developed as gluten-free flour made from local raw materials. 

Optimization of Enzymatic Skinning of Catfish Nuggets Using Response Surface Methodology

2012 ◽  
Vol 472-475 ◽  
pp. 3094-3103
Author(s):  
Pramuk Parakulsuksatid ◽  
Dja Shin Wang ◽  
Juan L. Silva ◽  
Tae Jo Kim ◽  
Tong Yuan Koo
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Maximum Yield ◽  
Enzyme Concentration ◽  
Process Conditions ◽  
Peritoneal Membrane ◽  
Food Industries ◽  
Central Composite

Abstract. Enzyme utilization today constitutes an important and essential part of processes used by the modern food industries. The objective of this research was to investigate the enzymatic skinning of catfish nuggets optimized by response surface methodology to remove the peritoneal membrane of nuggets. The effect of enzyme concentration, temperature, and time was carried out using central composite design. The response surface methodology found out that the optimized process conditions for good skinning and maximum yield were the following: (a) any enzyme concentration, temperature 42°C, time 12 min; (b) 0.15% enzyme concentration, temperature 35°C and time 12 min. This finding is important for maximize enzyme utilization on manufacture processes used by the catfish industries.

Enzyme-assisted Extraction for Optimized Recovery of Phenolic Bioactives from Peganum hermala Leaves Using Response Surface Methodology

2018 ◽  
Vol 17 (4) ◽  
pp. 349-354
Author(s):  
Qadir Rahman ◽  
Anwar Farooq ◽  
Amjad Gilani Mazhar ◽  
Nadeem Yaqoob Muhammad ◽  
Ahmad Mukhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Enzyme Concentration ◽  
Coumaric Acid ◽  
Assisted Extraction ◽  
Pre Treatment ◽  
Optimized Conditions ◽  
Enzyme Complexes ◽  
Hydrolysis Of ◽  
Central Composite

This study investigates the effect of enzyme formulations (Zympex-014, Kemzyme dry-plus and Natuzyme) on recovery of phenolics from Peganum hermala (harmal) leaves, under optimized conditions using response surface methodology. As compared to the other enzyme complexes, the yield (34 g/100g) obtained through Zympex-014-assisted extraction was higher under optimized conditions such as time (75 min), temperature (70°C), pH (6.5) and enzyme concentration (5 g/100 g) using central composite design (CCD). Effectiveness of Zympex-014 towards hydrolysis of P. hermala leaves cell wall was examined by analyzing the control and enzyme-treated leave residues using scanning electron microscope (SEM). GC/MS characterization authenticated the presence of quercetin (1.44), gallic acid (0.23), caffeic acid (0.04), cinnamic acid (0.05), m-coumaric acid (0.23) and p-coumaric acid (0.37 μg/g) as the potent phenolics in Zympex-014 based extract. It can be concluded from the findings of the current work that pre-treatment of P. hermala leaves with Zympex-014 significantly enhanced the recovery of phenolics that supports its potential uses in the nutra-pharamaceutical industry.

scholarly journals Enzyme optimization to reduce the viscosity of pitanga (Eugenia uniflora L.) juice

2016 ◽  
Vol 19 (0) ◽  
Author(s):  
Ricardo Schmitz Ongaratto ◽  
Luiz Antonio Viotto
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Incubation Time ◽  
Regression Models ◽  
Incubation Temperature ◽  
Correlation Coefficients ◽  
Enzyme Concentration ◽  
Optimum Conditions ◽  
Activity Time ◽  
Independent Variables

Summary The aim of this work was to separately evaluate the effects of pectinase and cellulase on the viscosity of pitanga juice, and determine the optimum conditions for their use employing response surface methodology. The independent variables were pectinase concentration (0-2.0 mg.g–1) and cellulase concentration (0-1.0 mg.g–1), activity time (10-110 min) and incubation temperature (23.2-56.8 °C). The use of pectinase and cellulase reduced the viscosity by about 15% and 25%, respectively. The results showed that enzyme concentration was the most important factor followed by activity time, and for the application of cellulase the incubation temperature had a significant effect too. The regression models showed correlation coefficients (R2) near to 0.90. The pectinase application conditions that led to the lowest viscosity were: concentration of 1.7 mg.g–1, incubation temperature of 37.6 °C and incubation time of 80 minutes, while for cellulase the values were: concentration of 1.0 mg.g-1, temperature range of 25 °C to 35 °C and incubation time of 110 minutes.

scholarly journals Optimization of Eugenol Extraction from Clove Oil using Response Surface Methodology

2015 ◽  
Vol 9 (11) ◽  
pp. 68
Author(s):  
Widayat Widayat ◽  
Hadiyanto Hadiyanto ◽  
Bambang Cahyono ◽  
Ngadiwiyana Ngadiwiyana
Keyword(s):  
Response Surface Methodology ◽  
Optimum Condition ◽  
Central Composite Design ◽  
Response Surface ◽  
Design Method ◽  
Main Process ◽  
Clove Oil ◽  
Design Variables ◽  
Central Composite

The objective of this research was to obtain optimum condition of eugenol production from clove oil using a central composite design method. The main process occured in the eugenol production was saphonification and neutralization processes. In order to optimize these processes, the ratio of NaOH/clove oil and temperature were studied as design variables i.e. ratio of NaOH/clove oil=1:2.5-1:3.5 while temperature was varied between 40 and 60oC. The yield of eugenol was considered as the main response in of this experiment. The result showed that the optimum condition was achieved when the temperature and the ratio of NaOH/clove oil were 50oC and 2.75:1, respectively and the yield was 39.17%.<br />

scholarly journals Pembuatan Biodiesel dari Minyak Sawit Off-Grade Menggunakan Katalis CaO Melalui Proses Dua Tahap

2015 ◽  
Vol 10 (3) ◽  
Author(s):  
Febrina Dwi Putri ◽  
Zuchra Helwani ◽  
Drastinawati Drastinawati
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Central Composite

Biodiesel merupakan sumber bahan bakar alternatif yang bisa dihasilkan dari minyak nabati melalui transesterifikasi dengan metanol. Sawit Off-grade merupakan salah satu sumber minyak nabati yang mempunyai potensi untuk digunakan sebagai bahan dasar produksi biodiesel. Reaksi transesterifikasi dilangsungkan dengan bantuan katalis CaO dari cangkang telur yang dikalsinasi pada suhu 900ºC selama 2 jam. Tujuan dari penelitian ini adalah untuk memproduksi biodiesel dari minyak sawit off-grade melalui reaksi dua-tahap, melihat performa katalis Cao terhadap reaksi transesterifikasi, serta mempelajari pengaruh temperatur reaksi, rasio mol minyak:metanol dan konsentrasi katalis terhadap yield biodiesel pada reaksi transesterifikasi. Esterifikasi dilakukan pada suhu 60°C dengan perbandingan mol minyak:metanol 1:12 menggunakan 1%wt katalis H2SO4. Asam lemak bebas (ALB) tereduksi dari 16,18% menjadi 0,6%. Reaksi transesterifikasi dilakukan dengan variasi perbandingan mol minyak:metanol 1:7, 1:9, 1:11, konsentrasi katalis 2%wt, 4%wt, 6%wt, serta suhu reaksi pada 50ºC, 60ºC, 70ºC selama 2 jam. Data yang diperoleh diproses dengan menggunakan response surface methodology (RSM), sedangkan jumlah eksperimen ditentukan dengan central composite design (CCD). Yield yang diperoleh pada penelitian ini yaitu sebanyak 62,30%-87,41%. Yield optimum dihasilkan pada reaksi dengan suhu 70ºC menggunakan minyak:metanol dengan perbandingan 1:11 dan katalis CaO 2%wt. Kondisi proses yang berpengaruh terhadap yield biodiesel adalah suhu reaksi, perbandingan mol minyak:metanol, serta interaksi antara suhu dengan perbandingan mol minyak:metanol. Akan tetapi tidak ditemukan adanya pengaruh signifikan konsentrasi katalis terhadap yield biodiesel.

scholarly journals OPTIMASI TEKSTUR BUAH TOMAT SETELAH SIMULASI TRANSPORTASI MENGGUNAKAN RESPON SURFACE METODOLOGY (RSM)

2019 ◽  
Vol 7 (2) ◽  
pp. 139-147
Author(s):  
Ida Ayu Widhiantari ◽  
Sandra Sandra ◽  
Gunomo Djoyowasito
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Central Composite

Selama kegiatan transportasi buah tomat dapat mengalami kerusakan akibat adanya frekuensi getaran yang berasal dari mesin transportasi dan juga lama waktu kegiatan transportasi. Adanya getaran selama proses transportasi buah tomat dapat mempengaruhi perubahan tekstur buah tomat. Optimasi dilakukan dalam penelitian ini dengan tujuan untuk memperoleh mutu buah tomat yang optimal setelah dilakukan simulasi transportasi. Optimasi dilakukan dengan menggunakan Response Surface Methodology (RSM) central composite design (CCD) dengan dua variabel bebas yaitu frekuensi getaran (3 Hz, 6HZ, dan 9Hz) dan lama waktu penggetaran (120, 150, dan 180 menit) serta tekstur buah tomat sebagai respon. Kondisi optimum diperoleh pada frekuensi getaran  2,33 Hz dan waktu simulasi transportasi 133,42 menit dengan nilai tekstur optimum buah tomat yaitu 0,147768 dengan nilai desirability sebesar 0,928.    

Sign in / Sign up

Export Citation Format

Share Document